ESS Problem saving Personal Data
Hi all,
When i tried to save personal data, it shows a screen where i can edit, then review and then save.
Everytime i press the Save button, the data are stored in the backend system, but then i get the following error.
Anyone have any ideas?
System Information:
EP 7.00 SP9 (1000.7.00.9.1.20060913120000)
SAP BASIS 700
SAP ECC 6.0
Business Package for Employee Self-Service (mySAP ERP) 1.0
Thanks in advance for any help,
Luis Cruz
java.lang.NullPointerException
at com.sap.xss.ser.xssconfview.vc.VcLinksView.wdDoModifyView(VcLinksView.java:167)
at com.sap.xss.ser.xssconfview.vc.wdp.InternalVcLinksView.wdDoModifyView(InternalVcLinksView.java:354)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:487)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:731)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:667)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:879)
at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1291)
at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:325)
at com.sap.portal.pb.PageBuilderjava.lang.NullPointerException
at com.sap.xss.ser.xssconfview.vc.VcLinksView.wdDoModifyView(VcLinksView.java:167)
at com.sap.xss.ser.xssconfview.vc.wdp.InternalVcLinksView.wdDoModifyView(InternalVcLinksView.java:354)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:487)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:731)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:667)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:879)
at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1291)
at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:325)
at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:831)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170).doPhase(PageBuilder.java:831)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Hi,
Forgot to close this thread.
I already solved the problem doing a Business Package upgrade to the last version.
It doesn't make dumps on ST22.
I believe that what Arul was saying is the same solution, so i'll set the points to him.
Thanks to both for the help,
Luis
Similar Messages
-
Something weird is happening in V4 so I've already rolled back to 3.6. On entering details (names, address, passwords) on website forms, V4 is sending personal data entered previously (cached?). It ignores what's just been entered on the form - it sends the old data! Has anyone else experienced this?
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" -
IPad Error" There was a problem saving some data to the devices cache"
We have purchased the app Environmental Science Buddy and there are presentations that can be viewed but I receive the above mentioned error when trying to play them on our school network. Took an iPad home and just as I thought no problem loading the presentations. I have gone through our firewall and its allowing the website that the data is coming from and I even added it to the allow list just to be sure but I am still receiving this message Any help would be greatly appreciated as I have this app on nearly 100 iPads!!!
Hello mjswooosh,
I'm very disheartened to hear that you've had ongoing problems when attempting to order from BestBuy.com. Our goal is ever to provide a fun and efficient shopping environment! Certainly creating aggravation serves neither you nor us and I apologize sincerely for this having been your experience.
We recommend the troubleshooting steps you mentioned (i.e., clearing the browser cache, deleting temporary internet files and cookies) because this is the most common cause of this type of problem. I too have encountered this issue from time to time and these steps have almost always resolved the problem. I say almost always because there's one further step you can try: ensure that you have signed out of BestBuy.com, then perform the browser maintenance steps we've recommended. Afterward, before signing in to BestBuy.com, add your desired items to your cart and sign in as part of the checkout process. When the standard steps have not netted a resolution for me, this has solved the problem each time.
I hope this helps. I'm very grateful that you took the time to write to us with your concerns and for sharing your very valuable feedback about your online experience.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message -
ESS error for Personal data and Family members
Hi,
I am having an error in ESS For pesonal data and Family members.
The error message is
Acritical error has occured.Processing of the service had to be terminated.Unsaved data has been lost.
PL contact you sytem Admin
An exception error has occured that was not caught error key RFC_ERROR_SYSTEM FAILURE.
Thanks
SasikanthCheck the table V_T7XSSPERSUBTYP.
Also check by the t.code HRUSER if the user have an employee assigned.
Check the log using the T.Code ST22.
Please You should do a trace using the t.code ST01
Hope this help you.
Regards -
Hide or remove delete button - ESS personal data iView
Hi, regarding for example ESS(50.4) personal data overview iView.
How to hide or remove delete button in the personal data overview iView screen(I know that this can be done on the ITS server side (web studio), but I want to do this in R3)
/Best Regards
PatrickAchim was right on. Edit/Change the Internet Service in R/3. A few things to consider though....
(1) if using the original service, you may want to create a copy of theme 99 into your own theme (any number will do...99 is just the default theme). If doing so, be sure to change the service's service file (yeh, I always loved that about SAP's naming) to point the ~theme paramter to your new theme.
or
(2) Copy the entire service into your own "Z" service. Then modify the templates as you wish. You will need to point the iView to this "Z" service too.
Also, it is best to do it via SE80 vs. file level because then it will be part of a transport and follow the correct path through the landscape.
Now, if you really want to go back to R/3....find the function module or program the transaction code for your service actually calls, make a "Z" version of it, modify it, create your own "Z" t-code to call it, and THEN modify the internet service's service file (either the original SAP one or a custom version) to call your new "Z" t-code. Lot of work...yes, I know....but that's the way it's done if you gotta get back down to the ABAP level.
Hope this helps!
Message was edited by: Christopher Solomon -
Problem saving data model when using Oracle DB Pivot feature
I have problem saving a data model - SQL Query that uses the Oracle DB PIVOT feature?
When I hit save, nothing happends.... have also tried "save as" - nothing is saved
No error message is shown.
Is Oracle DB PIVOT not supported by OBIEE?
The SQL that is causing the problem is this one:
SELECT * FROM
SELECT field_name as field,
CASE
WHEN col_1 = 'A' THEN 'Name 1'
WHEN col_1 like 'B_%' THEN 'Name 2'
END
as gastype,
energy
FROM table_1
WHERE code = 'K'
AND trunc(DAYTIME,'YYYY') = trunc(to_date('2012-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'), 'YYYY')
AND (col_1 in ('A') or col_1 like 'B_%')
PIVOT (sum(energy) for (gastype) in ('Name 1' as Name1, 'Name 2' as Name2))
order by field
We are using OBIEE 11.1.1.6.7 (Win 2008R2) against Oracle DB 11.2.0.3Just a wild guess .. Have you done dbsetup after installing IAS and said you are going to said databases ?
-
Hi Expert,
I am doing hiring function and while doing it, I am facing problem in Personal Data.
It ask for Worker's identification number in Indian Payroll.
In HR Data, there is a field value required in
CUIL/CUIT
It is a mandetory filed, can any one tell me if I can change the configuration or what value i have to enter?
regards,
SejalHi sikinder,
I am making a project.
could you tell me the path for country setting?
SPRO -> IMG - > PM - > PA -> Basic Settings, is it the one?
Could you tell me patth to identify screen number?
I have checked, the issue raised, I could not find...
Sejal -
Problems with in ESS (Menu "Own Data" option "Personal Data") (upload EHP4)
I have a problem with the ESS in the option u201CPersonal Datau201D from the Area u201COwn Datau201D.
This is the error:
<b>
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(ArrayList.java:507)
at java.util.ArrayList.get(ArrayList.java:324)
at com.sap.tc.webdynpro.progmodel.context.Node$ElementList.getElement(Node.java:2028)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementAtInternal(Node.java:621)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementAt(Node.java:628)
at com.sap.xss.per.fc.persinfo.FcPersInfo.getSubtypevalue(FcPersInfo.java:2209)
at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.getSubtypevalue(InternalFcPersInfo.java:968)
at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.getSubtypevalue(FcPersInfoInterface.java:388)
at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.getSubtypevalue(InternalFcPersInfoInterface.java:357)
at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.getSubtypevalue(InternalFcPersInfoInterface.java:593)
...(continue)
</b>
I set a breakpoint on RFC HRXSS_PER_READ_P0002_ES. It only stops on the breakpoint when we are in the view option.
When I had the ESS inside the SAP 6.00 it was running correctly, but now that I uploaded the version to 6.04 (EHP4) where I had to include the EMPLOYEE_PERSDATA_ES_SERVICE_13 services along other services(PERSDATA).
The only service I had to include where Im finding problems is EMPLOYEE_PERSDATA_ES_SERVICE_13.
Its showed in the Error I put above, that it is trying to find u201CSubtypeu201D.
In the SAP 6.00 version I was setting the subtype option in the "specify use case and active subtypes" option but now I donu2019t find this option. Only a new option appears called "Determine Active Subtypes and Make Settings".
I hope you could help me to solve this problem, thanks.@Kirsten
I enter a record of V_T588MFPROPC, result is the same (error: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0)
@Sergio:
I reviewed the Portal Content,
I look the role folder ESS in case the "Personal Information" Personal Data
http://img193.imageshack.us/img193/2565/myrole.jpg (My Role folder)
I look the EHP4 folder in case "Personal Information" > Personal Data
http://img208.imageshack.us/img208/4469/myrole14.jpg (My EHP 4.0 folder)
Both are different because the EHP4 contains the number 14 which I presume is the version, but this version is not replicated in the Role folder
In this part, I show the "User Management" option
In case the ESS, once record.
http://img23.imageshack.us/img23/238/roleswithess.jpg (ESS once record)
In case the MSS, three records, I choose the mss14 obviously
http://img21.imageshack.us/img21/2406/roleswithmss.jpg (MSS three records)
but The system information content the SAP_ESS 1.4, I think so.
http://img189.imageshack.us/img189/4649/systeminformation.jpg
I hope the answers,
thanks for your posts and helps.
Ivan -
Can't see the ESS Additional Personal Data link within Personal Information
Hi All,
For some reasons, I can not see the Additional Personal Data link within the ESS Personal Information iView. I have checked the Homepage framework and the existence of the iView in the PCD and everything appears to be fine.
Do I need to assign any additional infotype to my id or give myself specific authorisations to see this link?
I would really appreciate if you could provide an answer to my query.
Thanks,
VibhuHi,
I think mostly you have maintained the data in PA30 Transaction and had data in Info type 0105.
After this try to check with your EA-HR patch and SAP HR patch in the services. If both are not maintained at the same patch levels such type of problems will occur.
Regards,
kishore. -
Problem: new entered data is saved but I am facing one error message --- no
This is a module program for gate entry of materials(miro). This is a simple entry form which updates z tables with data entered. I have to send the new record details automatically through mail to the particular vendor email id from where the material has been purchased.
Problem: new entered data is saved but I am facing one error message --- no authorization to unpack list with rfc when the program is sending list through mail.
PROGRAM ZMMI001_GRN_ENTRY_BARCODE MESSAGE-ID ZMM .
*Table Declaration
TABLES : EKKO , EKPO , LFA1 , MARC ,
MARD , J_1IMTCHID , EKET , MSEG,
MKPF , ZMMT001_GRN_GATE,
ZMMT002_GRN_ITEM.
TABLES: ADR6.
*Table Control Declaration
CONTROLS : TC1 TYPE TABLEVIEW USING SCREEN 1000.
DATA: COLS LIKE LINE OF TC1-COLS.
*Internal Table Declaration
DATA : BEGIN OF IT_TC1 OCCURS 0,
SEL,
SNO(2) TYPE C,
ITEMCODE(18) TYPE C,
ITEMNAME(40) TYPE C,
QUANTITY TYPE P DECIMALS 2,
EXCISE(13) TYPE P DECIMALS 2,
END OF IT_TC1.
DATA : IT_TEMP_TC1 LIKE IT_TC1 OCCURS 0 WITH HEADER LINE.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA : IT_EKPO LIKE EKPO OCCURS 0 WITH HEADER LINE.
DATA : IT_EKKO LIKE EKKO OCCURS 0 WITH HEADER LINE.
DATA : IT_EKET LIKE EKET OCCURS 0 WITH HEADER LINE.
DATA : WK_ZMMT01 LIKE ZMMT001_GRN_GATE.
DATA : IT_ZMMT01 LIKE ZMMT001_GRN_GATE OCCURS 0 WITH HEADER LINE.
DATA : IT_ZMMT02 LIKE ZMMT002_GRN_ITEM OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF IT_TEMP_EKPO OCCURS 0,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
END OF IT_TEMP_EKPO.
DATA : BEGIN OF IT_MSEG OCCURS 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
EBELN LIKE MSEG-EBELN,
EBELP LIKE MSEG-EBELP,
BUDAT LIKE MKPF-BUDAT,
MENGE LIKE MSEG-MENGE,
END OF IT_MSEG.
DATA : BEGIN OF IT_TEMP_MSEG OCCURS 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
BWART LIKE MSEG-BWART,
EBELN LIKE MSEG-EBELN,
END OF IT_TEMP_MSEG.
DATA : BEGIN OF IT_TEMP_MKPF OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
BKTXT LIKE MKPF-BKTXT,
END OF IT_TEMP_MKPF.
*Data Declaration
DATA : WK_SNO TYPE I,
WK_LIFNR LIKE LFA1-LIFNR,
WK_EBELN(10) TYPE C,
WK_VBELN(10) TYPE C,
WK_FKDAT TYPE D,
WK_NAME LIKE LFA1-NAME1,
WK_SCHNO(10) TYPE C,
WK_CHALNO(10) TYPE C,
WK_CHALDATE(10) TYPE C,
WK_GRNO(10) TYPE C,
WK_GRDATE(10) TYPE C,
WK_VEHICLE(10) TYPE C,
WK_CARRIER(10) TYPE C,
WK_FREIGHT(13) TYPE P DECIMALS 2,
WK_MDOC(3) TYPE C,
WK_DEPT(7) TYPE C,
WK_MODE(7) TYPE C,
WK_BASIC(13) TYPE P DECIMALS 2,
WK_EXCISE(13) TYPE P DECIMALS 2,
WK_TAX(13) TYPE P DECIMALS 2,
WK_APPVAL(13) TYPE P DECIMALS 2,
WK_CHAL(2) TYPE C,
WK_FORM38(9) TYPE C,
WK_COMMENT(30) TYPE C,
WK_MAKTX(40) TYPE C,
WK_LINES TYPE I,
WK_TOTAL LIKE MARD-LABST,
WK_LGORT LIKE MARD-LGORT,
WK_EXCISE_IND,
WK_TOT_EXCISE LIKE EKPO-NETWR,
WK_DIFF LIKE EKPO-NETWR,
WK_BSTYP LIKE EKKO-BSTYP,
WK_BSART LIKE EKKO-BSART,
WK_DIFF_QTY LIKE EKET-MENGE,
WK_101_QTY LIKE EKET-MENGE,
WK_102_QTY LIKE EKET-MENGE,
WK_122_QTY LIKE EKET-MENGE,
WK_WERKS LIKE EKPO-WERKS,
WK_CHAR_SNO TYPE STRING,
WK_DATE LIKE SY-DATUM,
WK_TIME LIKE SY-UZEIT.
DATA : WK_DATE1 LIKE SY-DATUM,
WK_DATE2 LIKE SY-DATUM,
WK_FISYEAR TYPE I,
WK_CHAR_YEAR(20) TYPE C.
DATA : V_UCOMM TYPE SY-UCOMM,
V_INDEX(10) TYPE C,
V_QUANTITY(8) TYPE C.
**DECLARATION FOR INPUT HELP*
TYPES : BEGIN OF VALUES,
TXZ01 LIKE EKPO-TXZ01,
MENGE LIKE EKPO-MENGE,
MATNR LIKE EKPO-MATNR,
END OF VALUES.
TYPES : BEGIN OF VALUES1,
EBELN LIKE EKKO-EBELN,
END OF VALUES1.
TYPES : BEGIN OF VALUES2,
NAME1 LIKE LFA1-NAME1,
LIFNR LIKE LFA1-LIFNR,
END OF VALUES2.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES WITH HEADER LINE,
VALUES_TAB1 TYPE TABLE OF VALUES1,
VALUE_EBELN TYPE TABLE OF VALUES1.
VALUES_TAB2 TYPE TABLE OF VALUES2.
DATA : VALUES_TAB2 TYPE VALUES2 OCCURS 0 WITH HEADER LINE.
DATA : RETURN_TAB LIKE DDSHRETVAL OCCURS 0 WITH HEADER LINE.
*nidhi
DATA: BEGIN OF IT_LFA1 OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
ADRNR LIKE LFA1-ADRNR,
END OF IT_LFA1.
DATA: BEGIN OF IT_ADR6 OCCURS 0,
ADDRNUMBER TYPE ADR6-ADDRNUMBER,
SMTP_ADDR TYPE ADR6-SMTP_ADDR,
END OF IT_ADR6.
*nidhi
*& Module FILL_TABLE_CONTROL OUTPUT
text
MODULE FILL_TABLE_CONTROL OUTPUT.
READ TABLE IT_TEMP_TC1 INTO IT_TC1 INDEX TC1-CURRENT_LINE.
ENDMODULE. " FILL_TABLE_CONTROL OUTPUT
*& Module READ_TABLE_CONTROL INPUT
text
MODULE READ_TABLE_CONTROL INPUT.
*Validation for Item code
CLEAR : EKPO-MATNR,
EKPO-WERKS.
IF sy-uname = 'GATE1020'.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR
SY-UNAME = 'ABAP' ).
**SELECT SINGLE bstyp FROM EKKO INTO WK_BSTYP WHERE ebeln = wk_ebeln.
**SELECT SINGLE bsart FROM EKKO INTO WK_BSART WHERE ebeln = wk_ebeln.
READ TABLE VALUES_TAB WITH KEY MATNR = IT_TC1-ITEMCODE.
**ELSE.
SELECT SINGLE MATNR WERKS
FROM EKPO CLIENT SPECIFIED
INTO (EKPO-MATNR , EKPO-WERKS )
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
MATNR EQ IT_TC1-ITEMCODE.
ENDIF.
IF SY-SUBRC NE 0 AND NOT IT_TC1-ITEMCODE IS INITIAL.
CLEAR it_tc1.
MESSAGE E003 WITH TEXT-002.
ELSE.
SELECT SINGLE MAKTX FROM MAKT
CLIENT SPECIFIED
INTO WK_MAKTX WHERE
MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND SPRAS = SY-LANGU.
ENDIF.
ENDIF.
**SELECT SINGLE bstyp FROM EKKO INTO WK_BSTYP WHERE ebeln = wk_ebeln.
**SELECT SINGLE bsart FROM EKKO INTO WK_BSART WHERE ebeln = wk_ebeln.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
IF WK_BSART = 'ZLR' .
Validation for Quantity.
IF NOT IT_TC1-QUANTITY IS INITIAL.
READ TABLE VALUES_TAB WITH KEY MATNR = IT_TC1-ITEMCODE.
IF SY-SUBRC EQ 0 AND IT_TC1-QUANTITY GT VALUES_TAB-MENGE.
MESSAGE E003 WITH TEXT-013.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*Validation for Max.Stock Level
CLEAR : MARC-MABST.
SELECT SINGLE MABST FROM MARC
CLIENT SPECIFIED
INTO MARC-MABST
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND
WERKS = EKPO-WERKS.
CLEAR : MARD-LABST ,
MARD-INSME .
SELECT SINGLE labst insme FROM mard
CLIENT SPECIFIED
INTO (mard-labst , mard-insme )
WHERE MANDT = SY-MANDT AND
matnr = it_tc1-itemcode
AND werks = ekpo-werks.
SELECT SUM( LABST ) SUM( INSME ) FROM MARD
CLIENT SPECIFIED
INTO (MARD-LABST , MARD-INSME )
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE
AND WERKS = EKPO-WERKS.
CLEAR : WK_TOTAL.
WK_TOTAL = MARD-LABST + MARD-INSME + IT_TC1-QUANTITY.
IF WK_BSART = 'ZLR'.
IF WK_TOTAL GT MARC-MABST.
MESSAGE E001 WITH IT_TC1-ITEMCODE.
ENDIF.
ENDIF.
Appending the table control data to Internal table
READ TABLE IT_TEMP_TC1 INDEX TC1-CURRENT_LINE.
IT_TC1-SNO = TC1-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MODIFY IT_TEMP_TC1 FROM IT_TC1 INDEX TC1-CURRENT_LINE.
ELSE.
READ TABLE IT_TEMP_TC1 WITH KEY ITEMCODE = IT_TC1-ITEMCODE.
IF SY-SUBRC NE 0.
IT_TC1-ITEMNAME = WK_MAKTX.
IF IT_TC1-ITEMCODE IS INITIAL.
CLEAR IT_TC1.
ELSE.
APPEND IT_TC1 TO IT_TEMP_TC1.
ENDIF.
ELSE.
MESSAGE E003 WITH TEXT-004.
ENDIF.
ENDIF.
CLEAR : J_1IMTCHID-J_1ICAPIND.
SELECT SINGLE J_1ICAPIND FROM J_1IMTCHID
CLIENT SPECIFIED
INTO J_1IMTCHID-J_1ICAPIND
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND
WERKS = EKPO-WERKS.
IF SY-SUBRC EQ 0.
IF J_1IMTCHID-J_1ICAPIND = 'N'.
WK_EXCISE_IND = 'N'.
ELSE.
WK_EXCISE_IND = 'E'.
ENDIF.
ENDIF.
ENDMODULE. " READ_TABLE_CONTROL INPUT
*& Module USER_COMMAND_1000 INPUT
text
MODULE USER_COMMAND_1000 INPUT.
V_UCOMM = SY-UCOMM.
CASE V_UCOMM.
WHEN 'WK_SAVE'.
IF WK_APPVAL > 0.
IF ( SY-UNAME = 'STORE1010' OR SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR SY-UNAME = 'STORE1080' ).
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = WK_VBELN
IMPORTING
OUTPUT = WK_VBELN.
SELECT * FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = WK_EBELN
AND
LOEKZ NE 'X'.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKKO INDEX 1.
WK_BSTYP = IT_EKKO-BSTYP.
ENDIF.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND LOEKZ NE 'X'.
SORT IT_EKPO BY EBELN EBELP.
IF WK_BSTYP = 'L'.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
SORT IT_EKET BY EBELN EBELP ETENR.
LOOP AT IT_EKPO.
CLEAR WK_DIFF_QTY.
LOOP AT IT_EKET WHERE EBELN = IT_EKPO-EBELN
AND EBELP = IT_EKPO-EBELP
AND EINDT LE SY-DATUM.
WK_DIFF_QTY = WK_DIFF_QTY + IT_EKET-MENGE -
IT_EKET-WEMNG.
ENDLOOP.
IF WK_DIFF_QTY GT 0.
IT_TEMP_EKPO-EBELN = IT_EKET-EBELN.
IT_TEMP_EKPO-EBELP = IT_EKET-EBELP.
IT_TEMP_EKPO-MATNR = IT_EKPO-MATNR.
APPEND IT_TEMP_EKPO.
ENDIF.
ENDLOOP.
ENDIF.
ELSEIF WK_BSTYP = 'F'.
SELECT * FROM EKET
CLIENT SPECIFIED
INTO TABLE IT_EKET
WHERE MANDT = SY-MANDT AND
EBELN = IT_EKPO-EBELN.
LOOP AT IT_EKPO.
CLEAR : WK_DIFF_QTY.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP.
IF SY-SUBRC EQ 0.
WK_DIFF_QTY = IT_EKPO-MENGE - IT_EKET-WEMNG.
ENDIF.
IF WK_DIFF_QTY GT 0.
IT_TEMP_EKPO-EBELN = IT_EKET-EBELN.
IT_TEMP_EKPO-EBELP = IT_EKET-EBELP.
IT_TEMP_EKPO-MATNR = IT_EKPO-MATNR.
APPEND IT_TEMP_EKPO.
ENDIF.
ENDLOOP.
ENDIF.
SORT IT_TEMP_EKPO BY EBELN EBELP.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GODYNPRO-PO_NUMBER'.
PERFORM BDC_FIELD USING 'GODYNPRO-PO_NUMBER'
WK_EBELN.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
IF WK_EXCISE_IND = 'E'.
PERFORM BDC_FIELD USING 'J_1IEXHEAD-EXNUM'
WK_VBELN.
PERFORM BDC_FIELD USING 'J_1IEXHEAD-EXDAT'
WK_FKDAT.
PERFORM BDC_FIELD USING 'GOHEAD-LFSNR'
WK_VBELN.
ELSE.
PERFORM BDC_FIELD USING 'GOHEAD-LFSNR'
WK_VBELN.
ENDIF.
CLEAR : WK_CHAR_SNO.
WK_CHAR_SNO = WK_SNO.
CONDENSE WK_CHAR_SNO NO-GAPS.
PERFORM BDC_FIELD USING 'GOHEAD-BKTXT'
WK_CHAR_SNO.
LOOP AT IT_TEMP_TC1.
READ TABLE IT_TEMP_EKPO WITH KEY MATNR =
IT_TEMP_TC1-ITEMCODE.
IF SY-SUBRC EQ 0.
CLEAR V_INDEX.
V_INDEX = SY-TABIX.
CONDENSE V_INDEX NO-GAPS.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GODYNPRO-DETAIL_ZEILE'.
PERFORM BDC_FIELD USING 'GODYNPRO-DETAIL_ZEILE'
PERFORM BDC_FIELD USING 'GODYNPRO-DETAIL_ZEILE'
V_INDEX.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GOITEM-ERFMG'.
PERFORM BDC_FIELD USING 'GOITEM-ERFMG'
CLEAR V_QUANTITY.
V_QUANTITY = IT_TEMP_TC1-QUANTITY.
CONDENSE V_QUANTITY NO-GAPS.
PERFORM BDC_FIELD USING 'GOITEM-ERFMG'
V_QUANTITY.
PERFORM BDC_FIELD USING 'GOITEM-LSMNG'
V_QUANTITY.
perform bdc_field using 'GOITEM-LGOBE'
WK_LGORT.
ENDIF.
ENDLOOP.
CALL TRANSACTION 'MIGO' USING BDCDATA
MODE 'E'
UPDATE 'L'.
IF SY-SUBRC NE 0.
MESSAGE E003 WITH TEXT-003.
LOOP AT SCREEN.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
LEAVE PROGRAM.
ELSE.
CLEAR : WK_TOT_EXCISE.
IF NOT WK_EXCISE IS INITIAL.
LOOP AT IT_TEMP_TC1.
READ TABLE IT_EKPO WITH KEY MATNR = IT_TEMP_TC1-ITEMCODE.
IF SY-SUBRC EQ 0.
WK_TOT_EXCISE = WK_TOT_EXCISE +
( ( ( IT_EKPO-NETWR / IT_EKPO-MENGE ) * 16 / 100 )
IT_TEMP_TC1-QUANTITY ).
ENDIF.
ENDLOOP.
WK_DIFF = WK_EXCISE - WK_TOT_EXCISE.
IF WK_DIFF LE 0.
WK_DIFF = -1 * WK_DIFF.
ENDIF.
IF WK_DIFF GE 1.
WK_COMMENT = 'Difference in Excise. Please Check!'.
ENDIF.
ENDIF.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKPO INDEX 1.
WK_WERKS = IT_EKPO-WERKS.
ENDIF.
SELECT * FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
INTO TABLE IT_ZMMT01
WHERE MANDT = SY-MANDT AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
SORT IT_ZMMT01 BY SERIAL DESCENDING.
READ TABLE IT_ZMMT01 INDEX 1.
WK_SNO = IT_ZMMT01-SERIAL + 1.
ELSE.
WK_SNO = 1.
ENDIF.
CLEAR WK_ZMMT01.
WK_ZMMT01-MANDT = SY-MANDT.
WK_ZMMT01-SERIAL = WK_SNO.
WK_ZMMT01-WERKS = WK_WERKS.
WK_ZMMT01-EBELN = WK_EBELN.
WK_ZMMT01-LIFNR = WK_LIFNR.
WK_ZMMT01-CHALNO = WK_CHALNO.
WK_ZMMT01-CHALDATE = WK_CHALDATE.
WK_ZMMT01-BILLNO = WK_VBELN.
WK_ZMMT01-BILLDATE = WK_FKDAT.
WK_ZMMT01-GRNUMBER = WK_GRNO.
WK_ZMMT01-GRDATE = WK_GRDATE.
WK_ZMMT01-VEHICLE = WK_VEHICLE.
WK_ZMMT01-CARRIER = WK_CARRIER.
WK_ZMMT01-FREIGHT = WK_FREIGHT.
WK_ZMMT01-MDOC = WK_MDOC.
WK_ZMMT01-DEPT = WK_DEPT.
WK_ZMMT01-PAYMODE = WK_MODE.
WK_ZMMT01-BASIC = WK_BASIC.
WK_ZMMT01-EXCISE = WK_EXCISE.
WK_ZMMT01-TAXAMT = WK_TAX.
WK_ZMMT01-APPVAL = WK_APPVAL.
WK_ZMMT01-CHALINV = WK_CHAL.
WK_ZMMT01-FORM38 = WK_FORM38.
WK_ZMMT01-COMMENTS = WK_COMMENT.
WK_ZMMT01-CDATE = SY-DATUM.
WK_ZMMT01-CTIME = SY-UZEIT.
WK_ZMMT01-PERSON = SY-UNAME.
IF WK_FKDAT+4(2) = '04' OR
WK_FKDAT+4(2) = '05' OR
WK_FKDAT+4(2) = '06' OR
WK_FKDAT+4(2) = '07' OR
WK_FKDAT+4(2) = '08' OR
WK_FKDAT+4(2) = '09' OR
WK_FKDAT+4(2) = '10' OR
WK_FKDAT+4(2) = '11' OR
WK_FKDAT+4(2) = '12'.
WK_DATE10(4) = WK_FKDAT0(4).
WK_DATE1+4(2) = '04'.
WK_DATE1+6(2) = '01'.
ELSEIF
WK_FKDAT+4(2) = '01' OR
WK_FKDAT+4(2) = '02' OR
WK_FKDAT+4(2) = '03'.
WK_FISYEAR = WK_FKDAT+0(4).
WK_FISYEAR = WK_FISYEAR - 1.
WK_CHAR_YEAR = WK_FISYEAR.
CONDENSE WK_CHAR_YEAR NO-GAPS.
WK_DATE1+0(4) = WK_CHAR_YEAR.
WK_DATE1+4(2) = '04'.
WK_DATE1+6(2) = '01'.
ELSE.
ENDIF.
nidhi
SELECT LIFNR ADRNR FROM LFA1 INTO TABLE IT_LFA1 WHERE LIFNR =
WK_ZMMT01-LIFNR.
SELECT ADDRNUMBER SMTP_ADDR FROM ADR6 INTO TABLE IT_ADR6 FOR
ALL ENTRIES IN IT_LFA1 WHERE ADDRNUMBER = IT_LFA1-ADRNR.
SELECT SINGLE * FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
WHERE MANDT = SY-MANDT AND
WERKS = WK_WERKS AND
LIFNR = WK_LIFNR AND
BILLNO = WK_VBELN AND
BILLDATE GE WK_DATE1.
IF SY-SUBRC EQ 0.
MESSAGE E003 WITH TEXT-006.
ENDIF.
CLEAR IT_ZMMT02.
REFRESH IT_ZMMT02.
LOOP AT IT_TEMP_TC1.
IT_ZMMT02-MANDT = SY-MANDT.
IT_ZMMT02-SERIAL = WK_SNO.
IT_ZMMT02-WERKS = WK_WERKS.
IT_ZMMT02-EBELN = WK_EBELN.
IT_ZMMT02-ITEMCODE = IT_TEMP_TC1-ITEMCODE.
IT_ZMMT02-DESCRIPTION = IT_TEMP_TC1-ITEMNAME.
IT_ZMMT02-QUANTITY = IT_TEMP_TC1-QUANTITY.
IT_ZMMT02-EXCISE = IT_TEMP_TC1-EXCISE.
APPEND IT_ZMMT02.
CLEAR IT_ZMMT02.
ENDLOOP.
IF IT_ZMMT02[] IS INITIAL.
MESSAGE E003 WITH TEXT-007.
ENDIF.
IF SY-UNAME = 'GATE1010' AND WK_WERKS NE '1010'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1020' AND WK_WERKS NE '1020'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1030' AND WK_WERKS NE '1030'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1040' AND WK_WERKS NE '1040'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1050' AND WK_WERKS NE '1050'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1060' AND WK_WERKS NE '1060'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'ABAP' AND WK_WERKS NE 'ABAP'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1070' AND WK_WERKS NE '1070'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1080' AND WK_WERKS NE '1080'.
MESSAGE E003 WITH TEXT-008.
ENDIF.
INSERT ZMMT001_GRN_GATE FROM WK_ZMMT01.
INSERT ZMMT002_GRN_ITEM FROM TABLE IT_ZMMT02.
IF SY-SUBRC EQ 0.
COMMIT WORK.
MESSAGE I002 WITH WK_SNO.
********nidhi*******************************************************
CALL SCREEN 1001.
CLEAR WK_LIFNR.
CLEAR WK_EBELN.
CLEAR WK_NAME.
CLEAR WK_SCHNO.
CLEAR WK_CHALNO.
CLEAR WK_CHALDATE.
CLEAR WK_VBELN.
CLEAR WK_FKDAT.
CLEAR WK_GRNO.
CLEAR WK_GRDATE.
CLEAR WK_VEHICLE.
CLEAR WK_CARRIER.
CLEAR WK_FREIGHT.
CLEAR WK_MDOC.
CLEAR WK_DEPT.
CLEAR WK_MODE.
CLEAR WK_BASIC.
CLEAR WK_EXCISE.
CLEAR WK_TAX.
CLEAR WK_APPVAL.
CLEAR WK_CHAL.
CLEAR WK_FORM38.
REFRESH IT_TEMP_TC1.
CLEAR WK_FISYEAR.
CLEAR WK_DATE1.
CLEAR WK_CHAR_YEAR.
CALL TRANSACTION 'ZMMI001'.
ELSE.
ROLLBACK WORK.
MESSAGE E003 WITH TEXT-006.
ENDIF.
ENDIF.
ELSE.
MESSAGE E009 WITH TEXT-014.
ENDIF.
WHEN 'WK_EXIT'.
WHEN 'WK_CLEAR'.
CLEAR WK_LIFNR.
CLEAR WK_EBELN.
CLEAR WK_NAME.
CLEAR WK_SCHNO.
CLEAR WK_CHALNO.
CLEAR WK_CHALDATE.
CLEAR WK_VBELN.
CLEAR WK_FKDAT.
CLEAR WK_GRNO.
CLEAR WK_GRDATE.
CLEAR WK_VEHICLE.
CLEAR WK_CARRIER.
CLEAR WK_FREIGHT.
CLEAR WK_MDOC.
CLEAR WK_DEPT.
CLEAR WK_MODE.
CLEAR WK_BASIC.
CLEAR WK_EXCISE.
CLEAR WK_TAX.
CLEAR WK_APPVAL.
CLEAR WK_CHAL.
CLEAR WK_FORM38.
REFRESH IT_TEMP_TC1 .
CLEAR WK_FISYEAR.
CLEAR WK_DATE1.
CLEAR WK_CHAR_YEAR.
WHEN 'DELETE'.
DELETE IT_TEMP_TC1 WHERE SEL = 'X'.
ENDCASE.
ENDMODULE. " USER_COMMAND_1000 INPUT
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDIF.
ENDFORM. "BDC_FIELD
*& Module STATUS_1000 OUTPUT
text
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'GRN'.
SET TITLEBAR 'GRN'.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'IT_TC1-ITEMCODE'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'WK_EBELN'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'WK_LIFNR'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
LOOP AT SCREEN.
IF SCREEN-NAME NE 'WK_COMMENT'.
SCREEN-INPUT = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
LOOP AT SCREEN.
IF SCREEN-NAME = 'WK_SNO' OR
SCREEN-NAME = 'SNO' OR
SCREEN-NAME = 'WK_COMMENT' .
SCREEN-INVISIBLE = 1.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
SCREEN-OUTPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
IF WK_LIFNR IS INITIAL.
SET CURSOR FIELD 'WK_LIFNR'.
ELSEIF WK_EBELN IS INITIAL.
SET CURSOR FIELD 'WK_EBELN'.
ELSEIF WK_VBELN IS INITIAL.
SET CURSOR FIELD 'WK_VBELN'.
ELSEIF WK_FKDAT IS INITIAL.
SET CURSOR FIELD 'WK_FKDAT'.
ENDIF.
ELSE.
IF NOT WK_SNO IS INITIAL.
IF SY-UNAME = 'STORE1010'.
WK_WERKS = '1010'.
ELSEIF SY-UNAME = 'STORE1020'.
WK_WERKS = '1020'.
ELSEIF SY-UNAME = 'STORE1030'.
WK_WERKS = '1030'.
ELSEIF SY-UNAME = 'STORE1040'.
WK_WERKS = '1040'.
ELSEIF SY-UNAME = 'STORE1050'.
WK_WERKS = '1050'.
ELSEIF SY-UNAME = 'STORE1060'.
WK_WERKS = '1060'.
ELSEIF SY-UNAME = 'STORE1070'.
WK_WERKS = '1070'.
ELSEIF SY-UNAME = 'STORE1080'.
WK_WERKS = '1080'.
ENDIF.
SELECT SINGLE * FROM ZMMT001_GRN_GATE INTO WK_ZMMT01
WHERE SERIAL = WK_SNO AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
WK_WERKS = WK_ZMMT01-WERKS.
WK_EBELN = WK_ZMMT01-EBELN.
WK_LIFNR = WK_ZMMT01-LIFNR.
WK_CHALNO = WK_ZMMT01-CHALNO.
WK_CHALDATE = WK_ZMMT01-CHALDATE.
WK_VBELN = WK_ZMMT01-BILLNO.
WK_FKDAT = WK_ZMMT01-BILLDATE.
WK_GRNO = WK_ZMMT01-GRNUMBER.
WK_GRDATE = WK_ZMMT01-GRDATE.
WK_VEHICLE = WK_ZMMT01-VEHICLE.
WK_CARRIER = WK_ZMMT01-CARRIER.
WK_FREIGHT = WK_ZMMT01-FREIGHT.
WK_MDOC = WK_ZMMT01-MDOC.
WK_DEPT = WK_ZMMT01-DEPT.
WK_MODE = WK_ZMMT01-PAYMODE.
WK_BASIC = WK_ZMMT01-BASIC.
WK_EXCISE = WK_ZMMT01-EXCISE.
WK_TAX = WK_ZMMT01-TAXAMT.
WK_APPVAL = WK_ZMMT01-APPVAL.
WK_CHAL = WK_ZMMT01-CHALINV.
WK_FORM38 = WK_ZMMT01-FORM38.
WK_COMMENT = WK_ZMMT01-COMMENTS.
SELECT * FROM ZMMT002_GRN_ITEM INTO TABLE IT_ZMMT02
WHERE SERIAL = WK_SNO AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
CLEAR IT_TEMP_TC1.
REFRESH IT_TEMP_TC1.
LOOP AT IT_ZMMT02.
IT_TEMP_TC1-SNO = SY-TABIX.
IT_TEMP_TC1-ITEMCODE = IT_ZMMT02-ITEMCODE.
IT_TEMP_TC1-ITEMNAME = IT_ZMMT02-DESCRIPTION.
IT_TEMP_TC1-QUANTITY = IT_ZMMT02-QUANTITY.
APPEND IT_TEMP_TC1.
CLEAR IT_TEMP_TC1.
ENDLOOP.
ENDIF.
ENDIF.
LOOP AT SCREEN.
IF ( SCREEN-NAME NE 'WK_SNO' ) AND
( SCREEN-NAME NE 'WK_SAVE' ) AND
( SCREEN-NAME NE 'WK_CLEAR' ) AND
( SCREEN-NAME NE 'WK_EXIT' ).
SCREEN-INPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
LOOP AT TC1-COLS INTO COLS WHERE INDEX GT 0.
COLS-SCREEN-INPUT = '0'.
MODIFY TC1-COLS FROM COLS INDEX SY-TABIX.
ENDLOOP.
ENDIF.
ENDIF.
WK_DATE = SY-DATUM.
WK_TIME = SY-UZEIT.
TC1-LINES = 20.
ENDMODULE. " STATUS_1000 OUTPUT
*& Module EXIT_1000 INPUT
text
MODULE EXIT_1000 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT' OR 'WK_EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " EXIT_1000 INPUT
*& Module ITEM_CODE INPUT
text
MODULE ITEM_CODE INPUT.
REFRESH : VALUES_TAB.
CLEAR : VALUES_TAB.
IF ( SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1010' OR
SY-UNAME = 'GATE1030' OR
SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR
SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR
SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR
SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR
SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR
SY-UNAME = 'STORE1010' OR
SY-UNAME = 'ABAP' ).
SELECT * FROM EKKO CLIENT SPECIFIED
INTO TABLE IT_EKKO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKKO INDEX 1.
WK_BSTYP = IT_EKKO-BSTYP.
WK_BSART = IT_EKKO-BSART.
ENDIF.
if wk_bsart = 'ZLR'.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
SORT IT_EKPO BY EBELN EBELP.
IF WK_BSTYP = 'L' AND WK_BSART = 'ZLR'.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
SORT IT_EKET BY EBELN EBELP ETENR.
LOOP AT IT_EKPO.
CLEAR WK_DIFF_QTY.
LOOP AT IT_EKET WHERE EBELN = IT_EKPO-EBELN
AND EBELP = IT_EKPO-EBELP
AND EINDT LE SY-DATUM.
WK_DIFF_QTY = WK_DIFF_QTY + IT_EKET-MENGE - IT_EKET-WEMNG.
ENDLOOP.
IF WK_DIFF_QTY GT 0.
VALUES_TAB-TXZ01 = IT_EKPO-TXZ01.
VALUES_TAB-MENGE = WK_DIFF_QTY.
VALUES_TAB-MATNR = IT_EKPO-MATNR.
APPEND VALUES_TAB.
ENDIF.
ENDLOOP.
ENDIF.
ELSEIF WK_BSTYP = 'F'.
SELECT mseg~mblnr
mseg~mjahr
mseg~zeile
mseg~bwart
mseg~matnr
mseg~ebeln
mseg~ebelp
mkpf~budat
mseg~menge INTO TABLE it_mseg
FROM mkpf INNER JOIN mseg
ON mkpfmblnr EQ msegmblnr
AND mkpfmjahr EQ msegmjahr
FOR ALL entries IN it_ekpo
WHERE bwart IN ('101','122','102')
AND werks = it_ekpo-werks
AND ebeln = it_ekpo-ebeln
AND ebelp = it_ekpo-ebelp.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET
WHERE MANDT = SY-MANDT AND
EBELN = IT_EKPO-EBELN.
LOOP AT IT_EKPO.
CLEAR : WK_DIFF_QTY.
wk_101_qty,
wk_102_qty,
wk_122_qty.
LOOP AT it_mseg WHERE ebeln = it_ekpo-ebeln AND
ebelp = it_ekpo-ebelp.
IF it_mseg-bwart = '101'.
wk_101_qty = wk_101_qty + it_mseg-menge.
ENDIF.
IF it_mseg-bwart = '102'.
wk_102_qty = wk_102_qty + it_mseg-menge.
ENDIF.
IF it_mseg-bwart = '122'.
wk_122_qty = wk_122_qty + it_mseg-menge.
ENDIF.
ENDLOOP.
if not it_mseg[] is initial.
wk_diff_qty = it_ekpo-menge - wk_101_qty
- wk_102_qty - wk_122_qty.
else.
wk_diff_qty = it_ekpo-menge.
endif.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP.
IF SY-SUBRC EQ 0.
WK_DIFF_QTY = IT_EKPO-MENGE - IT_EKET-WEMNG.
ENDIF.
IF wk_diff_qty LE it_ekpo-menge.
IF WK_DIFF_QTY GT 0.
VALUES_TAB-TXZ01 = IT_EKPO-TXZ01.
VALUES_TAB-MENGE = WK_DIFF_QTY.
VALUES_TAB-MATNR = IT_EKPO-MATNR.
APPEND VALUES_TAB.
ENDIF.
ENDLOOP.
ENDIF.
ELSE.
SELECT TXZ01
MATNR FROM EKPO CLIENT SPECIFIED
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
ENDIF.
ELSE.
SELECT TXZ01
MATNR FROM EKPO CLIENT SPECIFIED
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
ENDIF.
SORT VALUES_TAB BY TXZ01.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'IT_TC1-ITEMCODE'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'IT_TC1-ITEMCODE'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB
RETURN_TAB = RETURN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
*BREAK-POINT.
IF SY-SUBRC = 0.
READ TABLE RETURN_TAB INDEX 1.
SELECT SINGLE MAKTX FROM MAKT CLIENT SPECIFIED
INTO WK_MAKTX WHERE
MANDT = SY-MANDT AND
MATNR = RETURN_TAB-FIELDVAL AND SPRAS = SY-LANGU.
ENDIF.
ENDMODULE. " ITEM_CODE INPUT
*& Module CHECK_INPUT INPUT
text
MODULE CHECK_INPUT INPUT.
CLEAR : EKKO-EBELN , EKKO-LIFNR.
SELECT SINGLE EBELN LIFNR FROM EKKO CLIENT SPECIFIED
INTO (EKKO-EBELN , EKKO-LIFNR ) WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC NE 0 AND ( SY-UNAME = 'GATE1010' OR
SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR
SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR
SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR
SY-UNAME = 'GATE1080' OR SY-UNAME = 'ABAP' ).
IF WK_EBELN NE SPACE.
MESSAGE E003 WITH TEXT-001.
ENDIF.
ELSE.
WK_LIFNR = EKKO-LIFNR.
CLEAR : LFA1-NAME1.
SELECT SINGLE NAME1 FROM LFA1 CLIENT SPECIFIED
INTO LFA1-NAME1 WHERE
MANDT = SY-MANDT AND
LIFNR = WK_LIFNR.
IF SY-SUBRC EQ 0.
WK_NAME = LFA1-NAME1.
ENDIF.
ENDIF.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
IF wk_vbeln IS INITIAL.
set cursor field wk_vbeln.
MESSAGE E003 WITH text-009.
ENDIF.
IF wk_fkdat IS INITIAL.
MESSAGE E003 WITH text-010.
ENDIF.
ENDIF.
IF ( SY-UNAME = 'STORE1010' OR SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR SY-UNAME = 'STORE1080' ).
CLEAR : ZMMT001_GRN_GATE.
SELECT SINGLE EBELN CDATE FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
INTO (ZMMT001_GRN_GATE-EBELN ,
ZMMT001_GRN_GATE-CDATE )
WHERE MANDT = SY-MANDT AND
SERIAL = WK_SNO AND WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
SELECT MBLNR
MJAHR
BUDAT
BKTXT FROM MKPF CLIENT SPECIFIED
INTO TABLE IT_TEMP_MKPF
WHERE MANDT = SY-MANDT AND
BUDAT = ZMMT001_GRN_GATE-CDATE
AND BKTXT = WK_SNO.
IFHi,
after calling you programm and get the message call transaction su53. That willl display the authorization that you need.
Hope this helps.
Regards
Bernd -
Table Control Icon appearing in Personal Data in ESS in Portal
Hello All,
We are on SAP Enterprise Portal 6.0 SPS09 with version details as
J2EE Engine 6.40 PatchLevel 87289.311
Portal 6.0.9.0.0
After installation of Portal system we installed Business Package for
Employee Self-Service 4.6C - 4.7 on our Portal system and installed ITS
6.20 patch 22 over Portal inorder for connecting Portal with Backend R/3 system.Ours is a development serverand Portal application and ITS are installed
on the same server.
When we access ESS on Portal ,and navigate to Personal Information /Personal Data / , there a small table control icon appears which we donot want to appear and which does not appear on R/3 side.Simultaneously for this transaction in R3 a selection row appears which doesnot appear in Portal.This problem is given even when we run ESS transactions through ITS on webgui.Wt might be the cause of this error ,do we need to make any settings ( Table specific) in ITS or R/3 or somewhere else. Kindly plz suggest.Plz revert at earliest.My email Id is [email protected] .
Regards,
SaumyaHi Somya,
Did you solved this problem. If you solved this issue then please let me know because iam also getting the same problem. you can send me an email at [email protected]
Thanks,
Abdul Hadi. -
DNI/NIF not saved in Personal Data
Hi experts,
I have a problem, in my iview of Personal Data, when I try to save/change the DNI, when the process finish the DNI/NIF is not saved in the pa20.
Why?
Thanks in advance,
Regards,Hi,
I have in the table T588MFPROPS
INFTY ITVERS SUBTY SNAME FNAME MANDATORY
0002 04 P0002 PERID X
Is it ok? My version is BP_ERP5ESS 1.41 SP11
SAP_HR 604 65
EA-HR 604 50
Could be problem of the difference betweern SAP_HR and EA-HR?
Regards. -
How to change the Success Message for Personal Data Screen in ESS
Hi,
While saving the Personal Data in the ESS I want to chage the Success message.When I check the DC , Message Class i am not able to find the the particular string.Can any one please guide how to find the Success Message String for this Personal Data Screen or Which BAPI I have to check .
Regards
AlexiHi iidhya ,
Please find the code below
public boolean onEvent( )
//@@begin onEvent()
String event = fpm.getEventData().getEventName();
if (event.equals(IFPM.EVENT_ADD)){
wdThis.wdGetFcPersInfoInterface().setModeForCreate(selectedSubtype);
}else if(event.equals(IFPM.EVENT_EDIT)){
wdThis.wdGetFcPersInfoInterface().setModeForEdit(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));
}else if(event.equals(IFPM.EVENT_REMOVE)){
wdThis.wdGetFcPersInfoInterface().setModeForDelete(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));
return true;
//@@end
Regards
Alexi -
Personal Data not working for an employee in ESS
Hai All,
I have configured Personal Data in ESS. But, for a particular employee Personal Data is giving the below mentioned error when he edits the data. The error happens when he edits and clicks on Review or when he clicks on the dropdown for Nationality(Only for this field, the error occurs) and selects a value from that dropdown.
As I searched in the forum, I found that we have to search ST22 for that user. In ST22, it is throwing 4 errors:
1. UNCAUGHT_EXCEPTION CX_HRPA_INVALID_INFOTYPE_DB. The exception 'CX_HRPA_INVALID_INFOTYPE_DB' was raised, but it was not caught anywhere along the call hierarchy. Termination occurred in the ABAP program "CL_HRPA_TIMECONSTRAINT========CP" - in "COMPUTE_INSERT". The main program was "SAPMSSY1 ".
2. SYSTEM_CANCELED. The current program "CL_HRPA_TIMECONSTRAINT========CP" has been terminated by another mode.
3. OBJECTS_OBJREF_NOT_ASSIGNED_NO CX_SY_REF_IS_INITIAL. Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in "HRXSS_PER_CLEANUP".
The main program was "SAPMSSY1 ".
4. SYSTEM_CANCELED. The current program "SAPLHRXSS_PER_MAC" has been terminated by another mode.
My questions are:
a Why it is not working for a particular employee?
b Why it is working for other employees?
c Did I miss out some configurations?
Please help me out.
Regards,
JubishHai,
Thankyou for the reply. But the user has entry in the infotype. Likewise, it is possible to change data from PA30 transaction also. The problem occurs only when I try to change data through ESS.
Regards,
Jubish -
Error in Editing the ESS Spain Personal Data
Hello,
We have an ESS global application and which Editing the Personal Information for Spain, we get a dump as given below. we have used the standard SAP implementation for Spain.
Error Description :
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(ArrayList.java:507)
at java.util.ArrayList.get(ArrayList.java:324)
at com.sap.tc.webdynpro.progmodel.context.Node$ElementList.getElement(Node.java:2028)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementAtInternal(Node.java:621)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementAt(Node.java:628)
at com.sap.xss.per.fc.persinfo.FcPersInfo.getSubtypevalue(FcPersInfo.java:2210)
at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.getSubtypevalue(InternalFcPersInfo.java:968)
at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.getSubtypevalue(FcPersInfoInterface.java:388)
at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.getSubtypevalue(InternalFcPersInfoInterface.java:357)
at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.getSubtypevalue(InternalFcPersInfoInterface.java:593)
at com.sap.xss.hr.per.es.personal.overview.VcPerPersonalESOverview.onEvent(VcPerPersonalESOverview.java:208)
at com.sap.xss.hr.per.es.personal.overview.wdp.InternalVcPerPersonalESOverview.onEvent(InternalVcPerPersonalESOverview.java:245)
at com.sap.xss.hr.per.es.personal.overview.VcPerPersonalESOverviewInterface.onEvent(VcPerPersonalESOverviewInterface.java:115)
at com.sap.xss.hr.per.es.personal.overview.wdp.InternalVcPerPersonalESOverviewInterface.onEvent(InternalVcPerPersonalESOverviewInterface.java:124)
at com.sap.xss.hr.per.es.personal.overview.wdp.InternalVcPerPersonalESOverviewInterface$External.onEvent(InternalVcPerPersonalESOverviewInterface.java:200)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:534)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseEvent(FPMComponent.java:938)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseEvent(FPMComponent.java:1101)
at com.sap.xss.hr.per.es.personal.overview.VcPerPersonalESOverview.edit(VcPerPersonalESOverview.java:248)
at com.sap.xss.hr.per.es.personal.overview.wdp.InternalVcPerPersonalESOverview.edit(InternalVcPerPersonalESOverview.java:257)
at com.sap.xss.hr.per.es.personal.overview.BizCardsView.onActionEdit(BizCardsView.java:181)
at com.sap.xss.hr.per.es.personal.overview.wdp.InternalBizCardsView.wdInvokeEventHandler(InternalBizCardsView.java:220)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1356)
at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:327)
at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:869)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Kindly assist.
Thanks!
Prasanna
Edited by: Prasanna Joshi on May 20, 2011 12:32 AMHi Prasanna,
This one is the front end Web Dynpro Java defect. So there wont be anything in the ST22.
Here is the problem you are facing. As its Personal Data application i.e. IT0002, it doesnu2019t have any subtypes. But the code is trying to read the subtypes and its not able to find the records. (Its trying to read the subtypes node, as there is no subtype for PData, you are getting java.lang.IndexOutOfBoundsException: Index: 0, Size: 0)
This is quiet common error, I have seen it couple of times. There should be SAP note for this or raise the ticket to SAP they will fix it.
Itu2019s a simple issue we too can fix it but the correct process is to get it addressed by SAP.
Regards
Yugandhar Reddy
Maybe you are looking for
-
Modification of the SOAP Adapter
Hi all, my problem is still the same as posted in the last thread. I have a webservice request submitted to the XI, which has no header element. So i have the problem that the message does not reach the XI due to an authorization error. Now i had the
-
Hi, I would like to implement a search (Query-find) using row lov's. There are 6 fields in my LOV and I would like to search on any of them. But as of now, the search works only if I give values for the first column in the query. For example, query f
-
What program(s) will play .mpeg, .mov and .avi? Thaks, -Nick
-
Controlling a bcd 7 segment lcd with labview
I am pretty new to the Labview environment and am having a problem which involves converting a decimal value into its equivalent 4 digit binary number which then needs to trigger the appropriate boolean value to control a bcd 7 segment LCD. For examp
-
I'm trying to compile RTPPlayerApplet.java and DataSource.java(All from Samples of JMF) WinXP Pro JMF 2.1.1 But there are some errors: Even I HAVE LiveStream.class,CLASSPATH is right... Compile command:java -classpath LiveStream DataSource.java (They