ESS US ADDRESS IVIEW NOT SHOWING ALL OVERVIEW FIELDS

NW2004s , EP 7 , MYSAPERP 5.0, ECC 6.0
ESS ADDRESS IVIEW - ( UNDER PERSONNEL INFORMATION ) -
The IView is not showing up few key fields in the Overview Part
for instance - Name, C/O , State , Zip code fields are missing from the overview part, but when i go to Edit part these field show up ( having data in them ).
The personalization option shows NO UI Element listed ( in the Overview - Transparent container ) in both Displayed and Hidden Column ( Yet few fields are showing up - Street Address , Telephone without area code )
I deleted all the personalizations from the iview and the corressponding page ( By reseting it - as advised by a fellow SDN'er ) , but it didn't fixed the issue.
Backend is correctly configured and webdynpro code has the fields listed as well.
There isn't any SAP Note on this, as well.

what SP level ar eyou on. If you are not on EHP2 or EHP3 ( that is ESS 1.3), the fields on the overview overview are hard coded ( UI elements generated on runtime not during design time) and hence you will not be able to use personalization. You will have to add fields in wdDoModify method of the overview screen.
I remember replying with a code of how to do this. Probably you may find it with a search on ESS forum

Similar Messages

ABAP query output not showing all output fields

I added a new field group in an existing query and marked them to display in the output list. When I test the output from SQ01 -> InfoSer Query, the output is what I expect. However, if I execute the query itself, it does not show the additional fields I just created.
I notice that in the Basic List layout design, the new fields are on a new line and not appended to the same line as the output fields before I did the modifications. I already tried to manipulate the output length and positions, but it didn't help. I turned on the ruler to drag the fields in the desired positions, sometimes it works but not for all the fields. Can someone help me please?

I figured it out already. The maximum width for the report output is 255 only. Switching from graphical query painter, I got the error that some fields were overlapping. Then I recalculated the starting positions of the fields and adjusted their lengths.

Table Maintainace generator not showing all the fields in table

Hello,
I generate table maintainace genrator for Z-Table and also create Tranaction code for that.
I have 27 fields in my Z-table but when I run tranaction code for table maintanance generator it shows only 8 fields.
I want to show all 27 fields in my tranaction code of table maintainace generator.
How I can Achieve this?
Please Suggest.
Thanks,
Amit

Hello Ram,
Thanks for your answer.
I increases lenght of screen and table control and activate function group.
But still in program PBO of screen it showing 8 fields as follows:
CHAIN.
    FIELD ZPROJ_FIN_STATS-PSPID .
    FIELD ZPROJ_FIN_STATS-GJAHR .
    FIELD ZPROJ_FIN_STATS-MONAT .
    FIELD ZPROJ_FIN_STATS-POSID .
    FIELD ZPROJ_FIN_STATS-IS_REL .
    FIELD ZPROJ_FIN_STATS-IS_TECO .
    FIELD ZPROJ_FIN_STATS-IS_CLSD .
    FIELD ZPROJ_FIN_STATS-LEG_STATUS .
    MODULE SET_UPDATE_FLAG ON CHAIN-REQUEST.
   ENDCHAIN.
but Iwant total 27 field to show.
How I can achieve this?
Thanks,
Amit

Crystal Reports Cross-Tab Report not showing all available fields

I am running CR2008 against MS SQL Express. I have several tables with fields and data in them and can create standard reports to show all the data in all the fields. However, when I try to create a cross-tab report, only some of the fields appear for me to choose from.
I created a standard report with all the fields I needed in my cross-tab report and ran a preview. Everything was there. I then added a cross-tab object, selected the tables only to find that fields that are in the main report are not showing up for selection in the cross-tab.

UPDATE: I exported the entire database from MS SQLExpress to MS Access and I am having the same issues, so it does not appear to be a problem with the database engine and, since the standard tabular reports show the fields, I am at a loss as to why they don't show up in the cross-tab or the Parameter fields.
I am creating the cross-tab through the Cross-Tab wizard. Is there maybe a bug in that? Is there a way to create it otherwise?

Toplink Expression - edit button not showing all possible field names

Hi,
i use Jdev 11g (11.1.1.0.1) with TopLink. I created a Toplink mapping and everything works well. I now want to create another named query with a selection criteria, but the Edit-Button in the Expression Builder for the selection criteria isn't working well. If i click the button nothing happens, but JDev freezes for about 15 sec. Anyone else with this problem ?
Thanks,
Friedrich

You should put all your menus in the root menu.
<?xml version="1.0" encoding="utf-8"?>
<openbox_menu xmlns="http://openbox.org/3.4/menu">
<menu id ="root-menu" label="Exit">
<item label="Reboot">
<action name="Execute">
<execute> sudo /sbin/shutdown -r now </execute>
</action>
</item>
<menu id="apps-accessories-menu" label="Accessories"/>
<menu id="apps-editors-menu" label="Editors">
<item label="Scite">
<action name="Execute">
<command> scite </command>
<startupnotify>
<enabled> yes </enabled>
</startupnotify>
</action>
</item>
</menu>
</menu>
</openbox_menu>

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

Address book of my mac does not show all my contacts in iphone. What do i do??

Address book of my mac does not show all my contacts in iphone. What do i do??

iCloud, which replaced MobileMe, requires OS X Lion (10.7.5) or higher. You will need to upgrade to OS X Lion higher in order to set up iCloud on your Mac. First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion and Mavericks requirements are the same, as listed here: http://support.apple.com/kb/HT5842.
If you can run Mavericks, you can download a free upgrade from the Mac App Store. If your system can only run Lion, you can go here to purchase a redemption code to download it from the Mac App Store. If you prefer Mountain Lion for software compatibility reasons, you can go here to purchase a redemption code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing applications by checking here: http://roaringapps.com/apps:table. Also be aware that older PPC programs such as AppleWorks and Office 2004 for Mac will not run on OS X Lion or higher.

HT202570 My buisness address does not show up on apple maps as a correct address. The address is 1351 summit drive jasper AL 35501 and we have been here for 8 years.

I have been at my buisness for 8 years and the address does not show up as an address in apple maps on any of my devices. How can I fix this? My address is 1351 summit drive jasper al 35501.

@Kilgore-Trout, there is no "contact us" at the bottom of the Apple Map. All I get is report the problem...move the pin, which I have done numerous times. Google maps gets it right & due to that fact, we have to tell vendors to NEVER use Apple Maps when getting directions for deliveries. I love apple, own all their products and now my BMW i3 is using their maps & I would love to have them be responsive.

Nokia E-5 music player does not show all songs. Th...

my Nokia E-5 music player does not show all songs. The filemanager does though. have tried every damn thing that i could, from the internet. no solution yet. Nokia wont address it. any solutions? please dont ask me to refersh my music player. nokia now manufactures stupid phones, instead of smartphones..
can any one help, friends? the last option i have to sell it off and wait for an HTC qwerty mango 7.5 phone

I perfectly understand that this is frustrating and of course Nokia should adress this.
I do not work for Nokia so maybe you could contact them. I see you have been to a care centre and reset it, but hopefully by contacting them by email they can log the issue for further work on firmwares?
I hope this sorts out. Have you btw, tried with some other memory card?
If it's not too much of a struggle, try backing up everything you have on it and format it, then reboot the phone which will recreate the needed folders and then drag and drop your stuff back to it and check again.
Hope you get it solved mate!

Text Entry Box not showing all text

I am creating a simple exercise where I would like the user to copy text from the course, paste it into word, and report back what the word count is. I thought perhaps the Text Entry Box would be the best way to go, since if you click on the existing (default) text, you can copy it. However after I place the paragraph of text in the box, and resize in the editor so that all the text shows, it does not show all the text when playing back, either previewd or published. It only shows the last few words of the last line at the top of the box.
Is there something I am missing? Or, is there an easier/better way to do what I need?
Thanks

Hi all
If this is Captivate 4, there may not be any need for a widget to do this. I'm guessing you haven't tried enabling the Scroll Bar for the Text Entry Box (TEB)?
When I just plop a TEB on a slide, I get this in edit view:
During playback it looks like this:
But if I edit the TEB properties and enable the Show Scrollbar option:
I get this in the output:
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

SelectOneChoice not showing all values from database

Hi!
I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
Code:
<af:selectOneChoice id="selAction" value="#{row.idCmd}"
unselectedLabel="<Selecione>">
<af:forEach var="alertTypeNode"
items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
<af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
label="#{alertTypeNode.dataProvider.nmCmd}"
id="si1"/>
</af:forEach>
</af:selectOneChoice>

In your page binding check the rangesize setting for the executable you use - set it to -1.

Transaction MD04 does not show all open sales/orders deliverys

Hi,
Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
Can anyone tell me the reason for this?
Regards,
Brijesh

Hi
Run SDRQCR21 report in Transaction SE38 for that material it will resolve your issue.
Please confirm
Amit

Analysis does not show all rows returned by SQL

Hi.
OBIEE 11.1.1.7.0
I have a strange problem. I have a simple table that should return customer number and sales. The report will show all of the sales, but it does not show all the customer numbers. The SQL that OBIEE creates does return all of the customer numbers. When I remove the sales and just include the customer number, the report only shows a couple of the customer numbers (it should show several hundred).
I guess what I'm looking for is any advice for how to debug this. I have spent about 3 days on this problem, so I have tried to look at it from every angle (data, RPD, report).
Any suggestions are appreciated.
Thank you.

Thank you for your reply.
New development. The issue has to do with a descriptor ID column. The customer number column is a varchar field and I set the descriptor ID column to the column_ID field. When I remove the descriptor ID setting, I received all custom numbers.

Ical not showing all day events in lion osx

ical does not show all day events

Hi,
I noticed that the issue only happens to specific user with specific computer. Please do the following checking to narrow down the issue:
1. please update the Outlook client with the latest patches and service packs.
2. disable using Exchange cached mode and check whether the issue happens in Online mode in this computer.
3. Start
Outlook in safe mode to have a try.
4. Perform a clean boot
in your Windows for the new machine.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

List view not showing all podcasts

Guys, I have the annoying problem that podcast management by itunes and the podcast app are F'ed up.
Not too lobg ago I experienced my ipad greying out most podcasts that were downloaded and on my ipad, for no reason at all. it took me 2 days fiddling with settings and ended up having to set every sync to "on" and set donwloading to "all" and "keep all podcasts"
Now I'm experiencing the problem that the "list" view in podcast app, is not showing all podcasts, but the "thumbnail" view is (as far as I can tell...). Why is this and how can I fix it to make sure both views show everything?
I'm running iOS 7.0.6 and iTunes 11.1.5

Hey there sporry,
It sounds like your Podcasts app is not showing your library correctly in the List view but Thumbnail looks ok. I recommend the troubleshooting in the article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Install another app from the App Store
If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
Remember to use the same Apple ID that you used to download the app that you're having issues with.
Reinstall the app
Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.
Thank you for using Apple Support Communities.
Cheers,
Sterling

ESS US ADDRESS IVIEW NOT SHOWING ALL OVERVIEW FIELDS

Similar Messages

Maybe you are looking for