ESS WF WS04200009 Leave request with HTML (BP for SAP R/3 4.7))

Hi there all,
I hope somebody can help how to configure this scenario. I searched around on SDN and SAP Help but couldn't find a thing.
I actually have 2 questions:
1. is there somebody who has some how-to guides for the ESS scenarios especially about the leave request.
2. Where are publishing the leave request in the portal. When i submit the leave request a got a pop-up with the message: you are not allowed to do this task.
I hope somebody has some useful information.
Thanks in advance
Regards Maarten.

Hi Maarten,
These points may help you:
1)All HTML templates should be imported into your IT Server.(ESS server)
2)In tcode PFTC select workflow template WS04200009 and proceed to workflow builder.
3) In workflow builder for each step select agent assignment and in the agent assignment attributes choose the general task option.
Everything else is standard and should work fine.
Regards,
Rajeev

Similar Messages

Report on Leave request (with HTML ) using ITS version

we are using ITS version of ESS and MSS version EP 6.0 and SAP R/3 5.0.
Our client wants a report on Leave Request(with HTML). the worflow used is WS20000081. my question is there any standard report to check the Leave Request which are approved or rejected. In SAP there is one standard report
RPTARQDBVIEW where in when we execute no output exists.
Please help me whether is there any report to view the leave requests.
Regards
Santosh Ghanwar

Dear Claude;
Thanks for your kind assistance... I was out for sometime & got up in some other urgent tasks...
Sorry for delay...
I had created the loop Payroll? with following conditions
&Employee.ControlRecordState&     =          1     or
&Employee.ControlRecordState&     =           2     or
&Employee.ControlRecordState&   =          3     or
&Employee.ControlRecordDate&     <           %Current Date%
but result is always "True"
Please help me out...
Best Regards,

Error in ESS while Accessing Leave Request

Dear All,
We are having the ESS in EP 7.0 and ECC 6.0, We have deployed the ESS components. Everything working fine for one User only,But for other users we are facing problem Leave Request. This is the error we are getting:::
com.sap.xss.config.FPMConfigurationException: Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.lea/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.LeaveRequest failed.
*     at com.sap.xss.config.pcd.PcdObjectBroker.retrieveObjectInternal(PcdObjectBroker.java:92)*
*     at com.sap.xss.config.pcd.PcdObjectBroker.retrieveObject(PcdObjectBroker.java:47)*
*     at com.sap.xss.config.domain.PersistentObjectManager.retrieveObjectInternal(PersistentObjectManager.java:106)*
*     at com.sap.xss.config.domain.PersistentObjectManager.retrieveObject(PersistentObjectManager.java:80)*
*     at com.sap.xss.config.FPMRepository.retrieveObjectInternal(FPMRepository.java:83)*
*     at com.sap.xss.config.FPMRepository.retrieveObject(FPMRepository.java:66)*
*     at com.sap.pcuigp.xssutils.ccpcd.FcXssPcd.initializeConfiguration(FcXssPcd.java:816)*
*     at com.sap.pcuigp.xssutils.ccpcd.FcXssPcd.loadConfiguration(FcXssPcd.java:250)*
*     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcd.loadConfiguration(InternalFcXssPcd.java:178)*
*     at com.sap.pcuigp.xssutils.ccpcd.FcXssPcdInterface.loadConfiguration(FcXssPcdInterface.java:138)*
*     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface.loadConfiguration(InternalFcXssPcdInterface.java:148)*
*     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface$External.loadConfiguration(InternalFcXssPcdInterface.java:240)*
*     at com.sap.pcuigp.xssutils.ccpcd.CcXssPcd.loadConfiguration(CcXssPcd.java:282)*
*     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcd.loadConfiguration(InternalCcXssPcd.java:184)*
*     at com.sap.pcuigp.xssutils.ccpcd.CcXssPcdInterface.loadConfiguration(CcXssPcdInterface.java:115)*
*     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcdInterface.loadConfiguration(InternalCcXssPcdInterface.java:124)*
*     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcdInterface$External.loadConfiguration(InternalCcXssPcdInterface.java:184)*
*     at com.sap.pcuigp.xssutils.ccxss.CcXss.loadConfiguration(CcXss.java:205)*
*     at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXss.loadConfiguration(InternalCcXss.java:153)*
*     at com.sap.pcuigp.xssutils.ccxss.CcXssInterface.loadConfiguration(CcXssInterface.java:112)*
*     at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXssInterface.loadConfiguration(InternalCcXssInterface.java:124)*
*     at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXssInterface$External.loadConfiguration(InternalCcXssInterface.java:184)*
*     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:172)*
*     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)*
*     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)*
*     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)*
*     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)*
*     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)*
*     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)*
*     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)*
*     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)*
*     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:731)*
*     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:667)*
*     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)*
*     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)*
*     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)*
*     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:879)*
*     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:222)*
*     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1280)*
*     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:354)*
*     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:552)*
*     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:596)*
*     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:827)*
*     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)*
*     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)*
*     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)*
*     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)*
*     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)*
*     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)*
*     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:683)*
*     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)*
*     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)*
*     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)*
*     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)*
*     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)*
*     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
*     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)*
*     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)*
*     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)*
*     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)*
*     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)*
*     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)*
*     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)*
*     at java.security.AccessController.doPrivileged(Native Method)*
*     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)*
*     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)*
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.lea/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.LeaveRequest)
*     at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java:421)*
*     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1177)*
*     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1183)*
*     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1183)*
*     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1183)*
*     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1183)*
*     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1183)*
*     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1183)*
*     at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java:1282)*
*     at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java:1229)*
*     at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:996)*
*     at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:68)*
*     at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:989)*
*     at com.sap.xss.config.pcd.PcdObjectBroker.getPcdContext(PcdObjectBroker.java:305)*
*     at com.sap.xss.config.pcd.PcdObjectBroker.retrieveObjectInternal(PcdObjectBroker.java:53)*
*     ... 69 more*
Please let me know what might be the problem, and y its not working for other ESS users.
Expecting solution and Ideas as soon as possible as its very are in crucial time.
Thanks
Ravi.S

This is a permission issue.
Please go to Content Admin> Portal C D> ...Provided by SAP> End User C> ESS> you will see the ESS object> Right click on it and select Permission and you will see the roles present on the right hand side.
Check it and save it.
Regards
Prashant

ESS/MSS: Approve Leave Request in UWL - not working

Hi to all,
we are using web dynpro ESS/ MSS (SAPESS07_12/ SAPMSS07_4) in portal NW04s for mySAP ERP2005 and are using UWL in order to approve leave requests. If employees are creating leave requests, everything works fine. After that the manager opens the leave request in UWL, the web dynpro application is openening succesfully and after some clicks he reaches the buttons to approve or reject the leave request. But by pushing one of them the following messages occures :
<b>Workitem 000000000000 Cannot be read</b>
After pushing the button again, another message comes up:
<b>No Customizing for status typ ARQ, Status approved...</b>
By the way, the same errors also come up when the employee wants to delete his leave request which is not approved.
Any ideas, what can be the reason?
Regards,
Frank

Hi Ashutosh,
I have found the reason. The user <b>WF - Batch</b> in sap erp, which is using the RFC Destination for workflow, was locked. Well, it is a a little bit strange for a cummunication user that he becomes locked. Unlocked him, now all works.
Thanks for your support.
Regards,
Frank

ESS Auto Approval Leave Request

Goodday all,
I'. trying to create a WF which will have a step tp auto approve a leave request after 5 days of submission to the approver. I have made a copy of the standard WF12300011 and have included 'modeled deadline monitoring' step just before 'request approved?' step. This is where i'm stuck, once teh deadline is obsolete, i will need to create a new step to automatically change the REQ.STATUS to 'Posted' OR 'Approved'. How do i do this step? or is there a better way to do things? Thanks in advance
Regards

Try Like this
1. As you said that you hvae a copy of the standard workflow so when the Modeled Deadline monitoring is reached any ways a outcome will be included in the WF template , so what you can do is in that outcome you include a Activity which uses the method of conatiner element REQ which will have the current request instance
REQ type is cl_pt_req_wf_attribs so in this class you hvae a method with name APPROVE so use this mehtod in the Activity that you will create in the modeled deadline monitoring outcome. this will approve the request and when ever the report RPTARQPOST is executeed the approved request will be posted into the respective infotypes.
If you hvae any more queries plz let me know, because i also had the same issue and i fixed that in the above mentioned way.

ESS- Error in Leave Request

Hi All,
I have a workset 'working Time' and in that i have 'leave request'. When i go and apply for leave(casual leave type which is type 0001) and press Review, its throws the error as" Attendance/absence type 0002 requires minimum of 3 attendance/absence days ", and if i will change the type of leave as probationary Leave, then also it throws the same error.
I need to debug it now.. where should i do this and what might be the cause for this error.
Pls help me..
Regards,
Shreya.

Hello king,
we saw that and checked but could'nt find it.. what to do next.
Pls will you tell us in more detail.. as i am learner.
Waiting for ur reply.
Regards,
Shreya.

Help Needed with HTML code for Image Positioning

Hi All,
Need a little help with some code for positioning images.
I initially used the following:
This is fine, but the border automatically puts a black border around the photo - how do I change it to white? Is there a way to set margins too, to prevent the text butting up against the photo?
I also used the following code with success:
<style type="text/css"
img
float:right;
border:2px solid white;
margin: 0px 0px 15px 20px
</style>
This code works, however the problem with it is it is not individual to just one photo - it moved all my photos and on that page, I wanted one photo floated to left and another to the right.
If I use this code, how can I make it photo specific, so that it only affects the placement, margins and borders of one photo?
Any help would be great.
Thanks

CSS question, not iWeb question. Regardless, use inline CSS styling for the image. You can also wrap the image in its own tag and declare an id or simply declare an id for the img tag, then set the style for the id_name:
<style type="text/css"
img#id_name
float:right;
border:2px solid white;
margin: 0px 0px 15px 20px
</style>
If you want to control the style of more than one image on a page but not all then use a class instead of an id.
the border automatically puts a black border around the photo - how do I change it to white? Is there a way to set margins too, to prevent the text butting up against the photo?
I believe you have discovered a solution for this according to your CSS code. You have set the border to white by looking at the code and adjusting it appropriately. Your margin is declared in the CSS also, adjust the pixels appropriately.
Read up some more on CSS to educate yourself further. I suggest w3schools.com or a CSS forum instead of the iWeb forum if you have CSS questions. It's kind of like if you drive your auto to the supermarket so you decide to go to the supermarket and ask everyone in the produce section to help when you have car problems. All the supermarket does is provide a place to park your auto. If you have car problems then ask a mechanic. iWeb (and most of its users) doesn't specialize in code, it simply provides an area for you to place it. Granted you might get lucky and find a mechanic in the produce section of the supermarket, but you're more likely to find a specialist at an auto swap meet (or CSS coding forum)!

ECATT integration with Mercury QuickTest for SAP

For the past few months I have been evaluating Quick Test Professional from Mercury and eCATT (extended Computer Aided Testing Tool) from SAP as testing tools for SAP. Mercury has a strong partnership with SAP and the two companies have offered ways to integrate their two products. Has anyone ever used eCATT in conjunction with QTP? What are your thoughts on this partnership? Is it worth $10,000 to pick up Mercury's QTP when SAP's eCATT is Free with SAP? I think the functionality is comparable, although QTP is easier to use and can interact with 3rd party applications. If anyone has used both QTP and eCATT, do you think these two tools are an either/or option or do they compliment each other?

Ben,
Good to hear you liked the article. Look out for another contribution in SPJ in the near future
I have attempted to answer your questions - all prefixed with <b>==> SAP (JM)</b> in your original text:
This document describes the functionality, abilities and benefits that would be lost in an SAP automated testing solution that excludes Mercurys QuickTest. Assuming that SAPs eCATT is the only tool used for SAP testing there will be the following limitations:
Script Creation
SAP eCATT cannot record certain types of report screens in TCD(Record) mode. i.e. MB58(view stock levels)
<b>==> SAP (JM):</b> This is true - but you can use the SAPGUI command, which uses the same technical interface as QTP.
Although the active screen simulator in eCATT contains data, it is usually not visible and the user has to guess where to click in order to capture a value. The other option is to forgo the active screen and do all of the work through the command interface.
The active screen in QuickTest allows the user to see the exact state of the screen that was recorded and access the fields in that screen.
<b>==> SAP (JM):</b> A valid criticism of eCATT. From Release 6.40 (SAP NetWeaver 04), a script-wide search function makes using the command interface easier.
The recorded script is one command, (i.e. TCD(VA01, VA01_1) is the command for an entire sales order), therefore Scripting logic must be placed before, after or around a transaction. There is less freedom in scripting inside of a transaction.
In the Expert view of QTP users can add or delete visual basic statements during any portion of the transaction. Each step, down to a click or keystroke is recorded as an individual statement that can be modified or deleted. Logic such as loops and conditions can be placed around any set of steps.
<b>==> SAP (JM):</b> Using the SAPGUI command in eCATT, you can create commands that cover a single screen, providing more of the kind of flexibility that you find in QTP.
The eCATT tool does not allow individual steps in a single transaction recording to be rearranged or deleted. If a user makes a mistake while recording, the entire transaction must be re-recorded.
QuickTest allows users to freely remove steps that were mistakes or errors after a transaction has been recorded.
<b>==> SAP (JM):</b> Again, using SAPGUI in eCATT, this is possible. Admittedly tricky in Release 6.20, but very simple in Web AS 6.40.
SAPs eCATT cannot inherently read excel spreadsheets for data driven testing. The eCATT tool allows for data driven testing through its own data tables. These are useful for entering small sets of data. For eCATT to test large sets of data created in excel spreadsheets there are three solutions:
1. Purchase conversion software from SAP
2. Write an in-house conversion script
3. Enter data manually into the eCATT data table
QuickTest stores its data table as an excel-readable .xls file.
<b>==> SAP (JM):</b> 1. Who is selling the conversion software?
<b>==> SAP (JM):</b> You can use the class CL_GUI_FRONTEND_SERVICES to upload a tab-delimited file into an internal table in a test script (using an Inline ABAP routine)
<b>==> SAP (JM):</b> Data upload/download is available in Web AS 6.40
Test scripts in eCATT are limited to about 40 parameters.
In QucikTest the only limitation to the number of parameters or number of iterations is the maximum number of columns and rows in an excel worksheet.
<b>==> SAP (JM):</b> Where does this limitation come from? Does it seem to be technical, or more practical in nature?
Scripts that enter a single line item in a table cannot be modified to enter multiple items later. A new script with multiple line items must be recorded.
A script in QTP can be modified to add a single line item or multiple line items to a table regardless of how many items were entered when the transaction was recorded.
<b>==> SAP (JM):</b> This is possible in eCATT if you use the SAPGUI command. Because a single SAPGUI command can cover a small part of a transaction, you can isolate the "line item" section in a single command, then put a loop around it. I have an example of this if you need one.
Script Execution and Analysis
SAP eCATT will respond with a pass/fail status based on its own criteria before any checkpoints have been added. Although eCATT allows for additional checkpoints, there is a minimum level of pre-set requirements that eCATT looks for in order to allow a test to pass. These pre-set requirements cannot be viewed or changed and tests may fail even when, from the users perspective, the transaction has responded exactly as expected.
Quick Test will only fail a test if the script if it was unable to recognize an object on the screen or complete every statement. Otherwise failure points are completely determined by the insertion of check points by the Test engineer. QuickTest also provides the option to ignore missing objects or uncompleted steps.
<b>==> SAP (JM):</b> Default conditions in eCATT (for example, fail if an error message occurs) can be overwritten. See eCATT documentation on http://help.sap.com for details (use the NetWeaver 2004 documentation - it is more comprehensive). Then, the only conditions under which the test would fail automatically would be a system error (RFC destination not available, or similar)
If SAP experiences a system failure, eCATT will fail too and test results may be lost.
If SAP were to crash QuickTest can take a screenshot and pinpoint the location in the code where the script failed.
<b>==> SAP (JM):</b> If you are working remotely (test case and application under test in different systems) you will get a log in the central test system, even if the SUT fails. The only circumstances under which everything is lost would be a full GUI crash!
eCATT cannot use the SAP logon pad to open a new session and log on as a new user.
In QuickTest new sessions can be opened and different users can be logged in with encrypted passwords.
<b>==> SAP (JM):</b> eCATT uses System Data Containers and RFC destinations to log onto multiple systems as a specified user. This is more flexible than using hard-coded user names in a script and allows you to leverage concepts such as Trusted RFC or SSO.
Aside from printing results on paper, users cannot view test results without an SAP logon to the system where the tests were executed.
Mercury provides a test viewer that can be installed on any machine and allows users without the QuickTest application to view and analyze test results.
<b>==> SAP (JM):</b> eCATT logs can be downloaded in a variety of formats from the log view in transaction SECATT (via the Print Preview function, then List -> Save).
Cannot view a screenshot of the failed step.
QuickTest provides the option to capture a screen shot at the point of failure.
<b>==> SAP (JM):</b> Again, a valid criticism. This has been rectified for the next release of eCATT (will be available with Solution Manager 4.0). When playing back a SAPGUI command, you will be able to capture screenshots at various points in time ranging from "every screen" to "on error".

ESS Leave request: specify processing process for an auto approval presence

Hi experts,
My client wants to use a type of presence in ESS (Mobile working) to be requested by the employee without any worklow approval. I just need them to automatically stay on status approved.
I was trying to configure this requirement but system does not allow me to uncheck box "Requests have to be approved". (See links).
http://screencast.com/t/iGblIQ9DKy
http://screencast.com/t/f4PgbmDvq
Any suggestions?
Thanks in advance.
Best,
AS

yeah there is a bug for this, implement the note 1451738 to fix it
requests to be approved, should be unchecked for automatic approval as you said is correct of achiveing your requirement!
Edited by: Siddharth Rajora on Nov 3, 2011 4:51 PM

Problems with html code for video

Hello
I followed this instructions to add my video:
- Upload the files in Muse < Add Files for upload ( These would add the files to your assets )
- Object > Insert HTML :
<video width="320" height="240" controls>
<source src="assets/video.mp4"/>
</video>"
My actual code is:
<video width="720" height="576" controls>
<source src="assets/Gelo.mp4"/>
</video>
And here's the problem when I preview:
Can someone help? What's wrong?
Thank you

Hi
Please check if the files are correctly added to your site, also the format should be supported by browser so you can check with different video formats.
Thanks,
Sanjit

PLEASE Help with HTML code for email background image...

Hi there!
i have a background image that I want to pop into an html email widget for the email's background... here is the web link I created in Photoshop: file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/tileabl e-metal-textures-2.html
If anyone could please help me out that would be AWESOME! I've attached pics of the background & I'm using Infusionsoft email builder which allows for HTML widgets. I have a code that I use for my landing pages & webforms which works, tried that but no dice!
Any help would be much appreciated - I'm an html newbie!
Here is the code that I use for landing pages & works great, tried it for the email & it was a fail:
<style>
#mainContent .background, {
      background: url('file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/ti leable-metal-textures-2.html') no-repeat center center fixed;
    background-size: cover;
</style>
<script src="file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/ti leable-metal-textures-2.html">
</script>
<script>
jQuery(document).ready(
      function(){
      jQuery(' table.bodyContainer').removeAttr('bgcolor');
</script>
thanks in advance!
Muse

Not sure what you expect. Your URL is absolute and pointing to a local file resource. It's not a proper relative HTML link. Beyond that it's toatlly unclear how you actually plan to load your image and where they are hosted, so nobody can tell you anything. Either way, there is an obviously painful lack of understanding of even the most basic web techniques, so the best advise anyone would give you is to spend some time with a web search and actualyl learn some of that stuff...
Mylenium

Mailto with html body for UIApplication sharedApplication

Hi There,
I would like to have my iPhone application be able to email out in html format some local data. After looking at it I have two questions:
1) What is the best way to construct large strings i.e html content. Appending hundreds on lines to an NSString seems cumbersome. In Java I would use a StringBuffer but I cant't find the C counterpart.
2) Once I have this html content can I simply pass it as the '?body'var in the mailto url of the UIApplication sharedApplication? It's a lot of data and may not have the correct %20 UTF coding.
Any ideas or examples on the best way to do this if it is at all possible? Ideally I would like to send an email with an attachment but the iPhone SDK prohibits that currently.
Many Thanks All

Hi,
Experience does help, of course, but I do look up things on the web. For example, for this issue I double-checked http://download.oracle.com/docs/cd/E17556_01/doc/apirefs.40/e15519/toc.htm as I actually use VARCHAR2s for the email body texts, so didn't even know you could use a clob! download.oracle.com usually has the information I need, so use inurl:download.oracle.com in a google search
Andy

Help with html code for displaying flash animation

hi all,
i'm new to the forums :)
not sure if this is the correct section or not.
i run a small web based community for xboxlive players and i
am trying to add an interactive flash file into a block on the main
portal page
What
the file should do- link to sample file
link to swf
file- link to actual flash file
homepage - link to portal
homepage where the flash file needs to be, if you scroll all the
way down the bottom of the page you will se it sort of works but im
stumped as to how to get the full animation to show properly ?
any help would be most appreciated.
cheers

hard to say just what the issue is here, since the file
operates normally in other embeds - I guessing that it has
something to do with your BB settings somewhere.

Parsing XML with html tags for style

I'm using flash to pull in XML data, but I want to use html
tags to be able to style the text. When I add any html, it treats
it as a sub-node and ignores the data. Also, line breaks in the xml
are being converted to double spaced paragraphs? The relevant code
is basically this:
if (element.nodeName.toUpperCase() == "TEXT")
{//add text to text array
ar_text[s]=element.firstChild.nodeValue;
textbox1.text = ar_text[0];

try to use htmlText instead text... like this:
textbox1.htmlText = ar_text[0]
adam

Much slower request with more nodes for ReplicatedCache

Hi,
We have been using Tangosol for 3 years without any problem, our topology is quite simple, we are using a replicated cache :
<cache-mapping>
<cache-name>repl-*</cache-name>
<scheme-name>default-replicated</scheme-name>
</cache-mapping>
<replicated-scheme>
<scheme-name>default-replicated</scheme-name>
<service-name>ReplicatedCache</service-name>
<backing-map-scheme>
<class-scheme>
<scheme-ref>default-backing-map</scheme-ref>
</class-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</replicated-scheme>
<class-scheme>
<scheme-name>default-backing-map</scheme-name>
<class-name>com.tangosol.util.SafeHashMap</class-name>
<init-params></init-params>
</class-scheme>
Recently we added more servers so more members (from 5 to 10) and we are facing some Tangosol requests that are now much much slower (2s -> 3mn)
The thread dump points out the following stack trace :
# com.tangosol.util.ThreadLocalObject:findThreadStorage(ThreadLocalObject.java:320)
# com.tangosol.util.ThreadGate$ThreadLocalCounter:decrement(ThreadGate.java:750)
# com.tangosol.util.ThreadGate:exit(ThreadGate.java:398)
# locked-->com.tangosol.util.ThreadGate(0x1d5c7bd0)
# com.tangosol.net.cache.OverflowMap:endKeyProcess(OverflowMap.java:1906)
# com.tangosol.net.cache.OverflowMap:getInternal(OverflowMap.java:873)
# com.tangosol.net.cache.OverflowMap:get(OverflowMap.java:330)
# com.tangosol.coherence.component.util.CacheHandler:getLease(CacheHandler.CDB:3)
# com.tangosol.coherence.component.util.CacheHandler:getCachedResource(CacheHandler.CDB:10)
# com.tangosol.coherence.component.util.CacheHandler:convert(CacheHandler.CDB:1)
# com.tangosol.coherence.component.util.CacheHandler$EntrySet$Entry:getValue(CacheHandler.CDB:2)
I don't understand why OverflowMap is in this stack trace ?
do you have any ideas why the requests are much slower when we add members ?
Thx,
Fabrice

Hi Fabrice,
OverflowMap is used in the internal implementation of replicated cache to store recently deleted objects.
Please send the full thread dump from one of your cache servers to support at tangosol.com.
Thanks,
Patrick Peralta
Tangosol, Inc.

ESS WF WS04200009 Leave request with HTML (BP for SAP R/3 4.7))

Similar Messages

Maybe you are looking for