ESS - ws01000109 - You are not of the possible agents of the task

Hi
When I try to cancel leave using workflow ws01000109 it is raising message
"You are not of the possible agents of the task ".
Can any body tell wheather we have to maintain data in pa30 transaction for this problem.
I have seen so many thread regarding this But I have not got any answer please reply for the same
I have set all tasks as general task only.
Edited by: balaji ramadas on Jun 8, 2009 4:01 PM

Hello,
You would be better off starting your own thread, and I hope that unlike the poster above you will share the result when you find a solution.
Has your task been set to General Task? If not, try that.
regards
Rick Bakker
Hanabi Technology

Similar Messages

  • 'You Are Not Using The Correct Type of Phone Cord' Error

    Having a issue with my fax on my HP Officejet Pro 8500 wireless.  Tried to send a fax, it  received a send error.  I ran fax test and it came back with "You are not using the correct type of phone cord".  Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok.  Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone.  I use a dedicated phone # and the Officejet is set to auto answer.   I can call out and receive calls on the phone connect to the Officejet.  My assumption is that since I can use the phone without issue there is nothing wrong with the phone line.  Any ideas?
    This question was solved.
    View Solution.

    I was having the same problem.  I'm using a the 2 wire phone cord provided with the printer and still getting this error.  Turns out that it related to have a phone extension plugged into the printer.  If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes.   I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error. 
    Run the test without a telephone plugged into the printer's extension jack and you should be fine.
    Worked for me!

  • I tried to upgrade to the latest version of Firefox but on the Firefox start page is still says "you are not on the latest version of Firefox, upgrade now"

    I tried to upgrade to the latest version of Firefox but on the Firefox start page it still says "you are not on the latest version of Firefox, upgrade now". The start page looks different so maybe it did upgrade but why does the reminder still show?

    You may see that message below the Google search box on www.google.com/firefox which is the old Firefox default home page. It appears that page is no longer being maintained by Google. You appear to have the latest Firefox version.
    '''If you want the Google search page as your home page,''' change your home page to '''''about:home''''' (a new, updated version of the old Google/Firefox home page is now built-in to Firefox).
    *See --> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    Also see --> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version<br />
    You can also see your version on the ''Help > Troubleshooting Information'' display
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • I have downloade F.8 and when I click on the desktop icon,Iget , you are not on the latest version of Firefox

    I down loaded F.8. When I click on the desktop icon, what appears on my monitor in small print is, You are not on the latest Firefox browser. Please advise.
    James Devlin

    Your home page is likely google.com/firefox which is no longer maintaned. Please change your homepage to something else, like about:home. https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page

  • ESS- Leave : You are not one of the possible agent for the task ws9021212?

    Hi ,
    I have copied the standard workflow template wa12300111 and assigned the new template in the customizing. When i apply leave from ESS working time , it says an error " You are not one of the possible agent for the task ws9021212? " .
    The similar kind of Error i have solved before in by making the workflow as GENERAL TASK in PFTC as follows.
    PFTC -> Choose "Workflow Template" from the drop down -> Enter the workflow template id "ws9021212" in the text box -> now click on "change" button -> Now goto the menu addional data -> agent assignment -> maintain -> select the task text -> and set it as general task.
    i have cleared the buffer also!
    BUT STILL I AM GETTING THE ERROR ?
    Please help me !
    Richard A

    hi Richard
    Try to do this way.  IN the workflow builder there is a button with hat. that is basic data. click on that and  it will go to another screen and u can find a apple button that is agent assignment for a task click that.
    It will open maintain agent assignment screen. click the text below that and click the attribute button and click the genral task. i think this will solve ur issue.
    If helpful kindly reward points
    Regards
    vijay

  • For 2nd time today I have restarted Firefox & upgraded to 6.0.2 BUT when I go back into Firefox it states You are not using the latest version, please Upgrade

    After Firefox has been opened once and then you try and open it again, a message appears stating - Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your computer. It is then NOT possible to close Firefox, so I restart the computer, but before it will allow that I have to force - End Program - NetscapeDispatchWnd - End Now.

    See [[Firefox is already running but is not responding]].

  • HT5312 What do you do when you are not recieving the email to reset apple id security questions

    i forgot my security question answers and notrecieving the e-mail to reset them. what do I do

    Welcome to the Apple Community.
    If you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple throughiTunes Store Support.

  • How can you find your iphone if you are not in the cloud?

    I cannot find my iphone --- any suggestion on how to do it as I am not in the cloud

    What to do if your iOS device is lost or stolen
    Reporting a lost or stolen Apple product

  • I have updated firefox 2 times since the last upgrade, but when I open it I still get the message "You are not on the latest version of Firefox Upgrade Now". I have downloaded and installed it so I'm stumped. Any suggestions?

    I am running Windows XP

    This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained by Google.
    Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same.

  • You are not a receiver of the work item in ESS Leave

    Hi,
    We are using standard ESS leave application in our portal, where employee can raise leave and his manager can approve/reject his leave. But I want in case manager rejects the leave, the rejected leave should not come into MSS UWL of employee, we will send a mail to employee and he can again login to ESS leave application and where he will see the rejected leave and he can re apply/change/delete  the rejected leave. We do not want rejected leave to come in UWL of employee as a work item.
    As of now when manager rejects the leave rejected leave of an employee , it is coming in UWL of the employee which we do not want, so what we did, we went to standard leave work flow template WS12300111, in that we double clicked on Task (TS12300116, Process Request by Employee) and in that  we clicked on agent assignment icon and than we clicked on attribute and we selected General forwarding not allowed radio button, by default general task radio button was selected.
    After selecting General forwarding not allowed radio button, even when manager rejects employee leave, rejected leave is not coming in UWL of employee which we want exactly, but another error is coming when employee goes to ESS leave application again and change or delete this rejected leave he is getting the error You are not a receiver of the work item .
    But if we select general task radio button in agent assignment in work flow , than eveything is working fine but employee is getting rejected leave in his UWL, that we do not want  at all, so why after selecting different radio button this error is coming ?
    Why employee is getting this error, why employee can not reapply/change his rejected leave. Is this portal error OR workflow error OR HR configuration error and  what is the solution for this..

    If you need this option then you need to change the WF Task.
    General Forwarding Not Allowed
    This indicator enables you to determine that work items for this task can only be forwarded to users who are agents for the task.
    If this indicator is not set, a work item for this task can be forwarded to all users.
    The best way to take care of User
    Forwaring authorization is the Task Classification (PFTC -> Additional
    Data -> Classification). Classify tasks with General Forwarding Not
    allowed, will give you the oppotunity to let the user allow to forward
    items JUST to the Possible Agents Assigned to the task
    (Additional Data -> Agent Assingment -> Maintain)...
    Clear that everything depends on How you have developed your workflows
    definitions. In that cases  the best think to do is
    create Different Tasks definition (TSxxxxxx) and let they start
    depending on Company Code (That can be driven via Conditions steps in
    the workjflow definition, for example). This will allow you to define
    Just the responsible Agents per each task, depending on the Companny
    Code. This definitively Resolve the Forwarding frelated Question.

  • You are not one of the possible agents of task 'WS20000081'

    Hi,
    I need to trigger the workflow WS20000081 using the service. This workflow gets triggered by 'Create Leave Request' service which is in ESS.
    To test the above said workflow, I need to execute the service WS20000081 in R/3. But when I execute this service from Service User log-on, it throws an error as follows.
    <b>You are not one of the possible agents of task 'WS20000081'.</b>
    Even after I changed the task assigment as 'General Task', it keeps giving the same error.
    Please suggest me how to solve this problem.
    Regards,
    jey

    There are agents assigned for a task in the workflow.The same role has been assigned to my user id.But it does not work
    I saw in Debug that it tries to execute the Method 'EXECUTE' in the Class CL_SWF_RUN_WORKFLOW_START..which checks for authorization internally.
    I never know why this is failing.
    I checked in another box which is upgraded to ECC .
    There inside the Method Execute it takes a parameter m_task->properties-general = 'X'
    and TCLASS = 'NO_CLASS'.These r passed to the authorization check which succeds there.
    But in this system m_task->properties-general  = '  ' and Tclass = '  '.
    Can anyone pls suggest how to go abt this.

  • Error: You are not one of the possible agents of task 'WS99900032'

    Hi frnds,
        I have copied the std leave request workflow WS12300111 into WS99900032 and assigned in the SPRO setting. The approvers are determined using the workflow rule (PFAC) and its not determined from Org Management. But when i tried to apply leave, its throwing me the error You are not one of the possible agents of task 'WS99900032'.
    Can anyone give me solution to solve it?
    thanks,
    Suganya.

    You are not one of the possible agents of task 'WS99900032'
    You need to refresh the  organizational environment and then execute the workitem
    1. First make the workflow tempalte as General task and then
    Goto PFTC ---> enter the workflow tempalte number by selecting workflow template  ---> open in display mode and on menu Addtional Data ---> agent assignment  ---> Maintian ---> select General task
    2. Goto SBWP  -
    > Seetings  -
    >workflow settings -
    > refresh ornozational environment and then try to execute the workitem

  • Unable send request, you are not one of the possible agents

    Hi,
    I am trying to configure workflow  for leave request, for my requirement i have to do some modifications to stadard workflow(12300111), so i copied it and made configuration settings in spro also, but when i create a leave from PTARQ transaction
    workflow is not getting created.
    when i debugged it, i got amessage saying 1) unable send request 2) you are not one of the possible agents
    Is there any other stting i have to do??
    Thanks,
    Krish.

    Hi Kishore,
    Please check below things.
    1. In the SPRO, have you maintained your workflow Template against the required leave type.
    2.Use CTRL + F2, and check is there any error in your workflow. Also check whether it is active or not.
    3. Check the workflow agent assignment in Basic data. It should be General Task.
    Thanks.

  • I dont see any picture or text at the point where it asks to confirm that you are not a robot!?

    i really dono why but whenevr i go to create my new account for the firefox sync and get to the part where you have to fill in the text according to the picture (confirm that you are not a robot), there is nothing dere, its completely blank! i hope sum1 can help me out as soon as possible.
    thanks in advance

    Just disable the adblock plugin, retry……

  • Although it is possible to insert podcasts into a playlist on the Mac, these are not in the playlist on the iPod after SYNC

    although it is possible to insert podcasts into a playlist on the Mac, these are not in the playlist on the iPod after SYNC

    Sambino,
    You should be fine. Just make sure that you download and install the P2 drivers for your PB. Also, if possible transfer directly to your external. P2 cards can eat up a lot of space very quickly and you don't want to overburden your system drive.
    K

Maybe you are looking for