ESSBAE:::LOGINFAILUREMESSAGEDETAILED

hi,
i have installed hyperion 11.1.1.3 on windows 2003 server.no problms while for configuring planning and workspace.but while logging into essbase it whosing error message
Essbase Server: localhost     com.essbase.eas.essbase.defs.ServerCommands.Connect     July 20, 2010 12:38:25 PM GMT+05:30
Error: 1051293: Login fails due to invalid login credentials
but ther is no problm while logging into workspace,planning....
how can i solve this issue?

I had initially configured it per the documentation as LOGINFAILUREMESSAGEDETAILED but was told by Oracle on Demand that is should be LOGINFAILUREMESSAGEDETAILED TRUE . I am not seeing any difference in the log when its set to LOGINFAILUREMESSAGEDETAILED TRUE as I did when it was just LOGINFAILUREMESSAGEDETAILED. So i just wanted to make sure. Thanks.

Similar Messages

  • HAL 9.3.1 Essbaes Adapter Error

    We recently migrated from Planning 3.5.1 to 9.3.1 and are still using HAL. In several of our Integrations we were able to pull in the new adapters (Planning 9.2 and Essbase 9.2 - we had to use this older Essbase adapter because the newest version wasn't working). And most of my integrations run fine.
    However, I have one integration for HAL that is failing on a Dimension extraction step with the message:
    Flow ID: 'getMetaActProd'
    Adapter ID: 'Essbase2--GrProfit'
    Error Message: com.hyperion.essbaseadapter.application.ap.APException: Exception #1: error code - 1033: Essbase Error: native code - 1060000
    Most the time we don't get this detail but a 'C++ exception' message and the integration stops (usually when we run this from it's executable). Sometimes running the integration from the executable gives us the other message above - wierd.
    Anyway, I go into the integration and run this and this steps is pulling about 4,000 part numbers into an Access database -we're comparing part #'s from our outline to parts that come in through a data source. The integration gets to about 3,000 or so and then looks like it freezes up and we get the above message.
    I have basically the same integration running on a smaller applicaiton/database and it gets through this step OK. So, I'm at a bit of a loss here as to what I can check. I suspect the adapter was fine because I have integrations the get into Essbase and load and calc' data and all that fine. But this step on our larger database is bombing.
    Anyone have any ideas?

    try the method suggested by user609180 in this post: Re: HAL error 1033 when connecting to essbase/ Analytics />
    It worked for me
    <blockquote>
    <blockquote>
              I've got a solution which Ive tested and works! You need the 9.2.0
              runtime in order for the VBIS Essbase 9.2.0 Adapter to work. This comes
              from installing the 9.2.0 Essbase Client
              This is what I did I on my client machine:
              1. Uninstall EAS 9.3.1 Console (Not the server), Essbase Client 9.3.1, VBIS
              2. Reinstall in this sequence:
              2.1 Essbase Client 9.2.0, including runtime, and spreadsheet add-in
              2.2 VBIS 7.3
              2.3 HAL Essbase Adapter 9.2.0
              2.4 EAS 9.3.1 Console
              Also
              ensure these Window Environment Variables are set(This is based on my
              computer settings so could differ from yours) Right mouse click My
              Computer &gt; Properties &gt; Advanced Tab &gt; Environment Variables:
              /*USER VARIABLES*/
              /*CLASS PATH*/
              C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter
              /*PATH*/
              C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm
              /*ENVIRONMENT VARIABLES*/
              /*CLASS PATH*/
              C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm
              /*PATH*/
              C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm;C:\Program Files\Java\jre1.5.0_07\bin\client\
              You might have extra variable paths defined under the PATH variables.
              Ive
              managed to add the adapter in a VBIS project without any errors, it
              connects to Essbase though yet to test if it will perform a send
              properly. The spreadsheet addin works with 9.2.0 and the EAS Console
              works with 9.3.1 connecting to the Essbase Server 9.3.1.
              Hope this helps!
              Message was edited by:
              user609180
    </blockquote>
    </blockquote>

  • Oracle ADF with Essbas e

    Conect essbase with Oracle ADF
    Give me the link
    I knew that can't able create a new connection for essbase, by editing config for essbase we can able to do
    so give me link for editing configuration of essbase in Oracle ADF
    Thanks in advance

    Hello John,
    Thanks for the reply. I can't find any material so that I can aware with JSF introduction (with demos) and ADF Faces. So will you please suggest me some tutorial or demos related to JSF and ADF faces. I passed through the video demos of Oracle ADF homepage but still I can't understand the use of those tags.
    regards,
    Kush
    Edited by: kush on Feb 22, 2012 12:07 AM

  • Why sql sever database design is used for essbas?

    Hi
    I am new to the Hyperion technology . i would like to know why do we use any RDBM like sql sever database design for essbase which is itself is the database.What is the main difference between these two databases?
    My understanding is that Essbase act as same as SSAS for cube and dimension building.And they use database design for storing the tables and other information.
    Thanks

    A relational database can be used for a number of reasons with Essbase (and is required in some instances). These include
    1. a repository for system tables for Shared services, EAS, Studio,EPMA, Workspace, Financial Management etc
    2. A data source for loading Essbase
    3. A work area for transformations

  • HAL Essbae adapter error

    I installed HAL 7.3 and Essbase adapter. Other than having to create a user variable "PATH", I was able to install Essbase adapater OK. The problem is that, when I drag-in the Essbase adapter and enter server, userID, and password to connect to Essbase, it gives me an error "Exception #1 Error Code = 1000 Error Msg = Error: Could not create session"<BR><BR>I'm fairly new to HAL, so I'd appreciate any leads. Thanks!<BR>

    The user variable "PATH" did not exist. I created the "PATH" variable with following value: C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm. I should had read the log file first, solution was in log file (C:\Program File\Vignette\v7\vbis\logs\ directory).

  • Planning Locale: en_US ,unable to load dimension.

    Hi,
    When i load meta data by command prompt,after enter password.I faced following issue.
    Any help will be appreciated.
    Planning locale: en_US
    using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/li
    b64
    EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "E
    PM_ORACLE_HOME".
    using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
    For non-DP app, Request dimension not needed
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from
    JVM property[EPM_ORACLE_INSTANCE].
    Loaded Version of Essbase RTC: 0xb1221
    [Thu Feb 07 12:34:09 PKT 2013]Unable to obtain dimension information and/or perf
    orm a data load: Unable to find specified load dimension "Account/L:c:/outlineLo
    ad.log" in "Outsourc" application.
    [Thu Feb 07 12:33:59 PKT 2013]Command line arguments: /A:Outsourc /U:admin /I:c:
    \accounts.csv /D:Account/L:c:/outlineLoad.log /X:c:/outlineLoad.exe
    Successfully logged into "Outsourc" application, Release 11.122, Adapter Interfa
    ce Version 5, Workforce supported and not enabled, CapEx not supported and not e
    nabled, CSS Version 3
    [Thu Feb 07 12:34:09 PKT 2013]Successfully located and opened input file "c:\acc
    ounts.csv".
    [Thu Feb 07 12:34:09 PKT 2013]Header record fields: Account, Parent, Data Storag
    e, Description, Data Type, Account Type, Aggregation(Plan1)
    [Thu Feb 07 12:34:09 PKT 2013]Unable to obtain dimension information and/or perf
    orm a data load: Unable to find specified load dimension "Account/L:c:/outlineLo
    ad.log" in "Outsourc" application.
    [Thu Feb 07 12:34:09 PKT 2013]Examine the Essbase log files for status if Essbas
    e data was loaded.
    [Thu Feb 07 12:34:09 PKT 2013]Planning Outline data store load process finished
    with exceptions: not all input records were read due to errors (or an empty inp
    ut file). 0 data records were read, 0 data records were processed, 0 were succes
    sfully loaded, 0 were rejected.
    Thank You.
    Edited by: 985307 on Feb 7, 2013 12:02 AM

    Thank you So much Sir :) It helped me ,some accounts details are loaded,but some are not.Kindly again identify issue.The meta data file i have created with the help of *"Getting Started with Oracle Hyperion Planning "* PDF book.
    c:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1>OutlineLoad /A:
    Outsourc /U:admin /I:c:\accounts.csv /D:Account /L:c:/outlineLoad.log /X:c:/outl
    ineLoad.exc
    Enter password:
    Planning locale: en_US
    using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/li
    b64
    EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "E
    PM_ORACLE_HOME".
    using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
    For non-DP app, Request dimension not needed
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from
    JVM property[EPM_ORACLE_INSTANCE].
    Loaded Version of Essbase RTC: 0xb1221
    Reaquired task list lease: Fri Feb 08 10:21:37 PKT 2013: 1360300897243
    [Outsourc] Valid userId: 50001 found in session: [1862242825, admin, native://DN
    =cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER
    com.hyperion.planning.InvalidMemberException: The member Net Income before taxes
    does not exist or you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member Net Income From Operati
    ons does not exist or you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member Gross Profit does not e
    xist or you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member Gross Profit does not e
    xist or you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member Net Income From Operati
    ons does not exist or you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member SG&A does not exist or
    you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member SG&A does not exist or
    you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member SG&A does not exist or
    you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member Net Income before taxes
    does not exist or you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member Net Income before taxes
    does not exist or you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    java.lang.IllegalArgumentException: Invalid value for field Account Type: Liabil
    ities.
    at com.hyperion.planning.db.HspHALDBImpl.saveMember(HspHALDBImpl.java:36
    9)
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:9041)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member Liabilities does not ex
    ist or you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member Liabilities does not ex
    ist or you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.HspRuntimeException: Exchange Rate must be None if Data Ty
    pe is Non-Currency, Percentage, Smart List, Date, or Text. Member: Statistical
    Drivers
    at com.hyperion.planning.db.HspDEDBImpl.validateAndSetAccountMemberInfor
    mation(HspDEDBImpl.java:6659)
    at com.hyperion.planning.db.HspDEDBImpl.saveMember(HspDEDBImpl.java:2871
    at com.hyperion.planning.db.HspDEDBImpl.saveMember(HspDEDBImpl.java:2651
    at com.hyperion.planning.db.HspHALDBImpl.saveMember(HspHALDBImpl.java:57
    1)
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:9041)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member Statistical Drivers doe
    s not exist or you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)
    com.hyperion.planning.InvalidMemberException: The member Statistical Drivers doe
    s not exist or you do not have access to it.
    at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
    gBean.java:8977)
    at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
    oad.java:801)
    at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
    utlineLoad.java:542)
    at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
    utlineLoad.java:112)
    at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
    ineLoad.java:1303)
    at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
    292)

  • EPM 11.1.2.3 configuration question

    Hi,
    I have setup two solaris zones(hostname#1 & hostname#2), on the hostname#1, I installed Oracle 11g and created database, and also installed and configured EPM foundation services(including OHS) & essbase server. On hostname#2, I installed& configured EPM foundation services(including OHS), reporting and Planning applications.
    In the hostname#1 database, I created a new user with the commands as:
    SQL> create user EPM11122 identified by essbase;
    SQL> grant dba,connect,resource to EPM11122;
    SQL> select * from dba_role_privs where grantee='EPM11122';
    So in the configuration of EPM on both hosts, the db configuration was set to connect to the db on the hostname1 with user EPM11122/essbase. The installation & configuration work fine without issue. However, when I start EPM on hostname#2 with "start.sh", and tried to access "http://hostname#2:19000/workspace", after login as admin, it generated errors as:
    1. The startup document specified does not exist in the repository.
    Select a new startup document on the General preferences tab
    2. Could not find a Hyperion Reporting and Analysis server running on localhost at port 6800.
    Please verify your server connect string and confirm that the server is up
    I'm wondering if anything wrong in my configuration causing the above problem? In addition, I'm suspect if the above setups correct(put planning & essbase onto separate hosts?) If yes, how can planning communicate with essbase as I didn't anyting in the EPM configuration on hostname#2 asking for the essbase info on the hostname#1.
    Thanks!

    Just checking a few logs for starting the EPM:
    "start-FoundationServices0-out.log", "start-Planning0-out.log",   showed the bellow message at the end:
    "<WebLogicServer> <server started in RUNNING mode>"
    The start-RaFramewok0-out.log", "start-FinaancialReporting0-ou.log" has exception messages in the log
    "GsmNot Found
    com.brio.one.services.globalservicemanager.GSMException: GsmNotFound"
    The "agent.log" under ReportingAnalysis complained:
    "No agent is configured rom HIT registry, please make sure the registry is configured properly"
    I'm the first-time installing & configuring EPM planning & essbase. Can you plz confirm if the bellow procedure of installation & configuration is correct or not especially the db configuration:
    1. On the oracle db created, created a new user and gave the 'dba', 'connect', 'resource' privilege
    2. install EPM foundation services & essbase on the hostname#1, when confiured essbae, pick "Perform first-time configuration of database", connect to the db with username/password created in step#1
    2. install EPM foundation servies & planning on the hostname#2, when configured planning, pick "Connect to a previous configured database", connect to the db with username/password created in step#2
    Thanks!

  • Essbase Client 32 bit on the Solaris SPARC 64 bit Cognos server - Need help

    Hello All,
    I have a SunSolaris SPARC 64 bit OS on which i have the 32 bit Cognos 8.4.1 installed.
    I now wanted to install a 32 bit Essbase client on this server.
    can anyone please let me know if there exists a 32 bit essbae client which can be installed on the SunSolaris SPARC 64 bit OS ?
    Thanks you in advance.
    MS

    I will asume the latest version of the essbase client
    "EPM System Installer installs both 32-bit and 64-bit Essbase Client on a machine with a 64-bit operating system."
    Once it is installed you may need to update the environment variables to point to the 32bit client.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Common Components reporting 'Failed' installing 11.1.2.1 on 2008 R2 64-bit

    I am installing 11.1.2.1 on Windows Server 2008 R2 64-bit. My first installation pass is for my Web Application server; Foundation, APS Server and EAS Server. 'Common Components' is showing status 'Failed'.
    I extracted the following packages (and have been back through both the docs and to eDelivery to make sure I didn't get an incorrect platform version or miss anything).
    V25495-01 Oracle Hyperion Performance Management System Installer, Fusion Edition Release 11.1.2.1.0 for Microsoft Windows (64-bit)
    V25464-01 Oracle Essbase Release 11.1.2.1.0 Part 1 of 2
    V25500-01 Oracle Essbase Release 11.1.2.1.0 Part 2 of 2 for Microsoft Windows (64-bit)
    V25466-01 Oracle Essbase Clients Release 11.1.2.1.0
    V25470-01 Oracle Hyperion Enterprise Performance Management Reporting and Analysis Core Components Release 11.1.2.1.0
    V25494-01 Oracle Hyperion Enterprise Performance Management System Additional Content Release 11.1.2.1.0
    V25496-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 1 of 7
    V25497-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 2 of 7
    V25498-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 3 of 7
    V25499-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 4 of 7
    V25459-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 5 of 7
    V25460-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 6 of 7
    V25461-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 7 of 7
    installTool-summary-datetime.log contains:
    ( Aug 26, 2011 10.11.46 AM ) Fail [   Unknown   ] installing ocm installTool-install-datetime.log contains:
    [2011-08-26T10:19:58.379-07:00] [EPMINS] [ERROR] [EPMINS-00531] [oracle.EPMINS] [tid: 24] [SRC_CLASS: com.hyperion.cis.SetFilePermissions] Error: [[
    ServiceException: (error code = -30001; message = "The system cannot find the file specified.
    (2)"; severity = 0)
         at com.installshield.wizard.platform.win32.Win32FileServiceImpl.setFileAttributes(Native Method)
         at sun.reflect.GeneratedMethodAccessor409.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.wizard.service.file.GenericFileService.setFileAttributes(Unknown Source)
         at com.hyperion.cis.SetFilePermissionsProductAction.setPermissions(SetFilePermissionsProductAction.java:67)
         at com.hyperion.cis.SetFilePermissionsProductAction.install(SetFilePermissionsProductAction.java:42)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:2969)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:8048)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:7199)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:5240)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Thread.java:619)The only suspicious entry I can find in the individual component install logs is in common-ocm-install.log:
    (Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Running: E:\Oracle\Middleware\EPMSystem11R1\ccr\bin\setupCCR.exe -S EPMInstall -V 11.1.2.0 -s -d ...
    (Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Environment: [USERPROFILE=C:\Users\USERNAME, JAVA_HOME=E:\Oracle\Middleware\jdk160_21, POSTED_JAVA=E:\Apps\Hyperion\Installation\\jre\winAMD64\1.6.0, SystemDrive=C:, Path=C:\Program Files\HP\NCU;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\, PROCESSOR_REVISION=2c02, VERSION=11.1.2.0, USERDOMAIN=SERVERNAME, ALLUSERSPROFILE=C:\ProgramData, dirname=E:\Apps\Hyperion\Installation\, =E:=E:\Apps\Hyperion\Installation, DATE_TIME=Fri-08.26.2011- 9.48.05, SESSIONNAME=Console, TMP=C:\Users\ESSBAS~1\AppData\Local\Temp\1, CommonProgramFiles=C:\Program Files\Common Files, =::=::\, LOGONSERVER=\\SERVERNAME, PROMPT=$P$G, PROCESSOR_LEVEL=6, LOCALAPPDATA=C:\Users\USERNAME\AppData\Local, COMPUTERNAME=SERVERNAME, SystemRoot=C:\Windows, USERNAME=USERNAME, APPDATA=C:\Users\USERNAME\AppData\Roaming, ProgramData=C:\ProgramData, PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC, ORACLE_HOME=E:\Oracle\Middleware\EPMSystem11R1, windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log, TIMEF= 9.48.05, ProgramFiles(x86)=C:\Program Files (x86), windows_tracing_flags=3, TEMP=C:\Users\ESSBAS~1\AppData\Local\Temp\1, ProgramFiles=C:\Program Files, HOMEDRIVE=C:, DATEU=Fri 08.26.2011, ProgramW6432=C:\Program Files, PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 44 Stepping 2, GenuineIntel, PROCESSOR_ARCHITECTURE=AMD64, DATEF=Fri-08.26.2011, FP_NO_HOST_CHECK=NO, OS=Windows_NT, HOMEPATH=\Users\USERNAME, CommonProgramW6432=C:\Program Files\Common Files, TIMEU= 9:48:05, windir=C:\Windows, NUMBER_OF_PROCESSORS=8, PUBLIC=C:\Users\Public, PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\, CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files, ComSpec=C:\Windows\system32\cmd.exe]
    (Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Executing cmd.exe /c start /wait /min cmd.exe /c "E:\Oracle\Middleware\EPMSystem11R1\ccr\bin\setupCCR.exe -S EPMInstall -V 11.1.2.0 -s -d >> E:\Oracle\Middleware\EPMSystem11R1\diagnostics\logs\install\install-ocm-setupCCR-output.log" ...
    (Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Finished with exit code 0
    (Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Running: E:\Oracle\Middleware\EPMSystem11R1\ccr\bin\configCCR.exe -r ...
    (Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Environment: [USERPROFILE=C:\Users\USERNAME, JAVA_HOME=E:\Oracle\Middleware\jdk160_21, POSTED_JAVA=E:\Apps\Hyperion\Installation\\jre\winAMD64\1.6.0, SystemDrive=C:, Path=C:\Program Files\HP\NCU;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\, PROCESSOR_REVISION=2c02, VERSION=11.1.2.0, USERDOMAIN=SERVERNAME, ALLUSERSPROFILE=C:\ProgramData, dirname=E:\Apps\Hyperion\Installation\, =E:=E:\Apps\Hyperion\Installation, DATE_TIME=Fri-08.26.2011- 9.48.05, SESSIONNAME=Console, TMP=C:\Users\ESSBAS~1\AppData\Local\Temp\1, CommonProgramFiles=C:\Program Files\Common Files, =::=::\, LOGONSERVER=\\SERVERNAME, PROMPT=$P$G, PROCESSOR_LEVEL=6, LOCALAPPDATA=C:\Users\USERNAME\AppData\Local, COMPUTERNAME=SERVERNAME, SystemRoot=C:\Windows, USERNAME=USERNAME, APPDATA=C:\Users\USERNAME\AppData\Roaming, ProgramData=C:\ProgramData, PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC, ORACLE_HOME=E:\Oracle\Middleware\EPMSystem11R1, windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log, TIMEF= 9.48.05, ProgramFiles(x86)=C:\Program Files (x86), windows_tracing_flags=3, TEMP=C:\Users\ESSBAS~1\AppData\Local\Temp\1, ProgramFiles=C:\Program Files, HOMEDRIVE=C:, DATEU=Fri 08.26.2011, ProgramW6432=C:\Program Files, PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 44 Stepping 2, GenuineIntel, PROCESSOR_ARCHITECTURE=AMD64, DATEF=Fri-08.26.2011, FP_NO_HOST_CHECK=NO, OS=Windows_NT, HOMEPATH=\Users\USERNAME, CommonProgramW6432=C:\Program Files\Common Files, TIMEU= 9:48:05, windir=C:\Windows, NUMBER_OF_PROCESSORS=8, PUBLIC=C:\Users\Public, PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\, CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files, ComSpec=C:\Windows\system32\cmd.exe]
    (Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Executing cmd.exe /c start /wait /min cmd.exe /c "E:\Oracle\Middleware\EPMSystem11R1\ccr\bin\configCCR.exe -r >> E:\Oracle\Middleware\EPMSystem11R1\diagnostics\logs\install\install-ocm-configCCR-output.log" ...
    (Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Finished with exit code 0
    (Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, wrn, OCM installation check failed: E:\Oracle\Middleware\EPMSystem11R1\ccr\bin\configCCR.exe does not existNote that the process looks for ORACLE_EPM_HOME\ccr\bin\configCCR.exe. The location exists, and setupCCR.exe (which gets called first) exists, but there is no configCCR.exe.
    If this is really just an OCM (Oracle Configuration Manager) issue then I hope it won't stop me configuring the rest of the environment correctly (OCM seems, at least in principle, like it could be optional), but I'm reluctant even to attempt to configure with install errors unresolved.

    I'm experiencing exactly the same problem. Tried re-installing and re-imaging the box several times. This is the first time I'm running into this issue as I have performed several installs on other Windows 2008 R2 servers with no issues.
    Does anyone have any idea? I opened SR with Oracle, they suggested that this is a bug (This is due to a known issue with older versions of OCM -unpublished bug 9800347 [http://bug.oraclecorp.com/pls/bug/webbug_edit.edit_info_top?rptno=9800347] . This was fixed in 10.3.4 and backported to 10.3.3.1.1; apparently an older version (10.3.3.1) which is bundled in this kit as this OCM 10.3.3.1).
    I'm not buying this explanation as it does not explain why this is happening and why few other times in the past with same system and same version install it worked perfectly fine.

  • Error in Cube Deployment from Essbase Studio

    Hi All,
    I am very new to ESSBAE Studio. I build up a minischema, dimension element(drag and drop from minischema), hierarchy(using dimension element) , Cube Schema and Meta model.
    Now when I'm going to deploy the model to Essbase Console It throws error :
    Member load for dimension Measure started at: 29-Nov-2012 12:52:32 o'clock GMT.
    Member load for dimension BU started at: 29-Nov-2012 12:52:32 o'clock GMT. Member load elapsed time:  1 Second.
    No mapping found for class : \'test'\'Dimension Element_MS'\'BU_V'\'ESS_PARENT'.
    Any help on this please.
    Thanks in advance.
    Pradipta

    Hi KosuruS,
    Thanks for your help. But,
    1> I have duplicate member names(as shared hierarchy)..but not with delayed key binding.
    2> I don't have any user defined member with member formula.
    I have my Measure hierarchy which have user defined member other than measure all hierarchies are coming from views.
    Even it shows error which is a staight hierarchy like :
    currency
    ----usd
    ----eur
    Regards
    Pradipta

  • External authentication on Essbase 9.3.1

    I am migrating from Essbase 7.3.x on 32-bit Windows to System9 on 64-bit windows. External authentication works on both Shared Services and EAS. I have successfully registered EAS and Essbase with shared services however I do not see Essbase in "User console" of Shared Services as an application. I am able to create native authenticated users in Essbase but unable to externalise the security. I get the following error messages when trying to externalise:
    Error: 1051549: Can not convert Analytic Services to Shared Services mode when Analytic Services is not configured with Shared Services or the initialization process has failed
    On starting Essbase, I see the following error message when I use the same CSSconfig file as used by shared services:
    [Wed Jul 16 10:26:45 2008]Local/ESSBASE0///Error(1051223)
    Single Sign On function call [css_init] failed with error [getOSVersion]
    [Wed Jul 16 10:26:45 2008]Local/ESSBASE0///Info(1051198)
    Single Sign-On Initialization Failed !
    If I point to the current CSS file used in production Essbase 7, I get the following message:
    [Wed Jul 16 10:33:26 2008]Local/ESSBASE0///Error(1051223)
    Single Sign On function call [css_init] failed with error [-1]
    [Wed Jul 16 10:33:26 2008]Local/ESSBASE0///Info(1051198)
    Single Sign-On Initialization Failed !
    In either case everything except External Authentication on System9 for Essbase works.
    Both shared services and Essbase are on the same 64-bit Windows box.
    Any help in resolving this will be greatly appreciated.
    Thanks,
    Vikram.

    HI:
    I recommand following these steps:
    1. Go to the box where you have your Essbase installed
    2. Pull up the Shared Services Configuration Utility
    3. Select COmponent to be registered as Essbase
    4. Remeber to stop the essbase - i assume you are getting the error hence essbae would not have loaded.
    5. Re-register Essbase with Shared services
    6.Start essbase in Foreground
    It shuld Start :) good Luck..let me know If this failed..
    Thanks,
    Sriram

  • 6.5 vs 6.2 Dynamic calc member in basis of @allocate function

    I just converted from 6.2 to 6.5 and have run across a problem in the @allocate function. It appears that it does not resolve the dynamic calc member. Formula is:"Curr Fcst"=@ALLOCATE("SumInput"->"Curr Fcst", @remove(@descendants(@currmbr(Accounts)),@Descendants(@CURRMBR(Accounts),-1)), "Consolidated"->"Curr Fcst"->&LactlmonTD, ,share); The problem is that &LactlmonTD - a substitution variable is "MAY YTD", which is a dynamic calc member. The formula works fine for a stored member "May" if you want to allocate based on last month only. This formula worked in 6.2, but does not work in 6.5 that I can see. Any ideas short of storing the data for YTD? I am logging it as a bug with hyperion.

    OK - Hyperion technical support has solved the issue with an "Undocumented feature". I needed to add the following statement to my Essbase.cfg file:CALCFGDEPOPT FALSEThe explaination was as follows:"This is basically to turn off EVENT 28 in Essbae 6.5. In Essbase 6.2 EVENT28 needs to be turned on manually in the config file, while in Essbase 6.5it is automatically turned on."

  • Essbase Studio Error(1021001): Failed to Establish Connection With SQL Data

    Hi.
    I have trying to deploy a cube with Essbase Studio but I get the error: "*Error(1021001): Failed to Establish Connection With SQL Database Server*"
    My environment is Linux 5, Oracle 11g and EPM 11.1.1.2. Oracle database and Essbase was installed with diferent users. In the .bash_profile of hypadmin user (that install Essbase) I have set the following variables
    ORACLE_BASE=/u01/app/oracledb/product/11.1.0
    ORACLE_HOME=$ORACLE_BASE/db_1
    LD_LIBRARY_PATH=/usr/X11R6/lib:$ORACLE_HOME/lib:$LD_LIBRARY_PATH
    ORACLE_HOSTNAME=devbi.sigfe2
    PATH=$ORACLE_HOME/bin:$ORACLE_HOME/jdk/bin:$ORACLE_HOME/bin:/sbin:$ORACLE_HOME/opmn/bin:$PATH
    ORACLE_SID=orcl
    JAVA_HOME=/u01/app/installfiles/jdk1.5.0_19
    In my pc (windows xp) I can open Essbase Studio console, do the connection to Oracle database, get tables and create minischema, mesures and hierarchies (I can see the preview of hierarchies). Also I can create cubes with EAS and can connect with MAXSHELL to essbase.
    When I try to deploy the cube from Essbaes Studio y get the error "Error(1021001): Failed to Establish Connection With SQL Database Server".
    The Essbase Studio Log File say:
    +12:40:16 07/24/09 (admin-1) INFO Start creating outline in database "5.4.0.41:1423.POC_ESS.POC_ESS1"...+
    +12:40:16 07/24/09 (admin-1) FINA Sign on Essbase by CSS token "5.4.0.41:1423" successfully...+
    +12:40:16 07/24/09 (admin-1) INFO Start building dimension "DM_CIUDADES" ...+
    +12:40:16 07/24/09 (admin-1) MÁS FINA Start creating rule file ...+
    +12:40:16 07/24/09 (admin-1) INFO SQL statement has been created and put into rule file "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+
    +12:40:16 07/24/09 (admin-1) INFO The query is "SELECT (CONCAT('reg_',CAST(cp_105."ID_REGIONPADRE" AS VARCHAR2(1000)))) as "REGION_PADRE", (CONCAT('reg_',CAST(cp_105."ID_REGION" AS VARCHAR2(1000)))) as "REGION_HIJO", cp_105."DE_REGION" as "REGION_HIJO.Default" FROM "POC"."DM_REGIONES_ESS3" cp_105 ORDER BY cp_105."DE_NIVEL" ASC, cp_105."ID_REGIONPADRE" ASC, cp_105."ID_REGION" ASC"+
    +12:40:16 07/24/09 (admin-1) INFO Rule file has been created and saved as "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+
    +12:40:16 07/24/09 (admin-1) FINA Essbase starts to add members to DM_CIUDADES dimensioin based on the rules file.+
    +12:40:16 07/24/09 (admin-1) ADVERTENCIA (1021001): Error al establecer conexión con el servidor de bases de datos SQL. Consulte el registro para obtener más información.+
    +12:40:16 07/24/09 (admin-1) ADVERTENCIA essbaseDriver.FailedToBuildDimensionException+
    +12:40:16 07/24/09 (admin-1) GRAVE Unexpected exception in EssbaseExport prevented cube from being deployed+
    -------------- Exception --------------
    com.hyperion.cp.datasources.export.essbase.EssbaseDriverException: Failed to deploy Essbase cube
    Thanks in advance to all that have any idea to help me to solve this issue.
    A.S.

    Hi,
    If you type database SID in lowercase, try to reenter iot in uppercase. Strange, but I and my colleagues encounter this behaviour many times.

  • Essbase Add in Connection issues

    Hi guys,
    My set up is this: Windows 7 64 bit with Ofifice 2010. I've installed Essbase but when when I hit connect in Excel, nothing happens. Hitting the other selecttions such as 'Query Designer' activates the other forms, just noting happens when I hit connect. I've tried changing the variables as per Tom's blog (http://timtows-hyperion-blog.blogspot.com/2010/03/classic-excel-add-in-in-windows-7.html) and nothing happens
    This may well be because it is different to Tom's which I thought I had to change to reflect our set up difference
    Another thing is when I try to connect to Data in Essbase Visual Explorer, I get the error message 'An error occurred while communicating with the data source'. NOt sure if these two issues are related, I am anothe newbie.
    BTW, these are the values for my variable which seems to be different to Tom's
    ARBORPATH=C:\Oracle\Middleware\EPMSystem11R1\products\ExcelAddin
    ESSBASEPATH=C:\Oracle\Middleware\EPMSystem11R1\products\ExcelAddin
    PATH:C:\Oracle\Middleware\EPMSystem11R1\products\ExcelAddin\bin
    and ESSLANG=English_UnitedStates.Latin1@Binary
    Forgive my ignorance but as noted, I am a newbie.
    thanks
    Sam

    Does the OP have Office 64-bit?
    All I can see is Windows 7 64-bit.
    OP -- You have:
    ARBORPATH=C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32
    ESSBASEPATH=C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32
    On my 32-bit Vista box, the variables are as follows:
    ARBORPATH=C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
    ESSBASEPATH=C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
    PATH=C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;blah;blah;blah
    I did not set the PATH -- that was the work of the 11.1.2 client installer and then a separate install by me of the standalone add-in install. I would have thought %ARBORPATH%;%ESSBASEPATH%;%PATH% would have done it, but again not my doing.
    What Tim is showing, btw, in his code is a StartAddIn.cmd so that his pathing information doesn't clobber the rest of his laptop.
    StartAddIn.cmd
    set ARBORPATH=C:\Oracle\MIDDLE~1\EPMSYS~1\products\Essbase\ESSBAS~1
    set ESSBASEPATH=C:\Oracle\MIDDLE~1\EPMSYS~1\products\Essbase\ESSBAS~1
    set PATH=%ARBORPATH%\bin
    start "C:\Program Files (x86)\Microsoft Office\Office12\EXCEL.EXE" C:\Oracle\MIDDLE~1\EPMSYS~1\products\Essbase\bin\essexcln.xllYou could also put the ARBORPATH, ESSBASEPATH, and PATH in your system's environment variables via Windows. Just start a CMD session to prove that these variables are set. In Vista, I had an issue where the variables were being set in admin id I used for installing All Things Oracle but not in the ID actually used while working. It was a bit complicated and reminded me why everyone seems to hate Vista. I was able to prove that things weren't tickety-boo by typing SET at the command prompt.
    Regards,
    Cameron Lackpour
    Edited by: CL on Apr 19, 2011 9:42 AM

  • Essbase security sync issue with Shared Services v 11.1.2.2

    Hi,
    We are using Essbase version 11.1.2 (ESB11.1.2.2.102B025) and shared services version 11.1.2.2.300.6001 (Drop 6)
    Foundation Services is on a cluster evironment, windows 2008 64 bit.
    Essbase is on Unix Sun Solaris.
    We encounter an issue in which each time a new user is added to a group.
    The user will not have immediate access to Essbas. Currently the only time the
    user will have access is when we restart essbase.
    Is there a way to sync users from Shared Services without restarting Essbase?
    Anyone has experience on this problem and may know what and where to look?
    This is the error the user get, even though the group has access to essbase cube and the user
    has been added to the group.
    [Thu Jun 27 16:22:18 2013]Local/ESSBASE0///79/Error(1055126)
    This user has no application access set. Please contact your system administrator
    [Thu Jun 27 16:22:18 2013]Local/ESSBASE0///79/Error(1054067)
    Internal error
    [Thu Jun 27 16:22:18 2013]Local/ESSBASE0///79/Error(1051293)
    Login fails due to invalid login credentials
    [Thu Jun 27 16:22:18 2013]Local/ESSBASE0///79/Warning(1051003)
    Error 1051293 processing request [Login] - disconnecting
    There is no issue if we provision the user directly to the cube, e.g. without using group.
    Please advise. Thanks.

    You shouldn't have to restart Essbase as it should automatically sync, there may be additional information in SharedServices_Security_Client.log though it is probably worth logging with Oracle.
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for

  • XML Schema validation Error

    Hi, Have a scenerio in which consecutive mapping needs to be done.The first mapping is a Java Mapping in which XML schema validation needs to be done. If XML Schema validation is sucessful(Mapping 1),then graphical message mapping(MM_Entry) needs to

  • Invoicing against a Service PO

    Dear Experts, I want to make payment against an Invoice send by a service contractor for completing part of the  work (30%) of the total service. EX: I have created a Service PO which included several services. The Service will be completed in severa

  • Link in Published IE won't open

    I published a vendor's web page on Windows 2008 R2 (RDS) for our users.   There is a link on the webpage that launches an app (Panaya Test Player) If I log onto the desktop of the session host and click the link that launches the player, it launches.

  • Ibook wants to reset every 10mins

    my friends ibook keeps poping up with the following screen: every 10 mins or so. once she has reset it, it comes back again and makes her reset her computer. she has tried resetting the PRAM, PMU etc but that hasn't helped any ideas?

  • SOUND NOT WORKING ON VIDEOS

    Whenever I play videos (Ex. YouTube, CollegeHumor, Gametrailers, IGN) the video plays but the sound does not. Yet both video and sound work with firefox. Why is this happening and how can I fix it? I'm currently running Windows Vista 64-bit and the l