Essbase 11.1.2.1 Users not inheriting filter access from group

Hello all! We installed Essbase 11.1.2.1 in a distributed environment integrated with Shared Services and ran into an issue when provisioning users via groups. Using Shared Services we created a Native Directory Group and User. We provisioned the group with the Server Access Role and Filter Application role, then assigned the filter to the group using 'assign access control' on the application in Shared Services. For some reason using the Essbase add-in we are unable to retrieve data from the database. We receive an error stating the user id does not have read access to the db. If we carry out the same provisioning steps above on the user directly, we are able to retrieve data from the database. Any ideas on what might be causing this?

In V11.1.2.2 ESSBASE is managed by OPMN. OPMN needs to be started before starting ESSBASE. You need to use "start.sh". Please do the following
1) Run "stop.sh" that is in the starter scripts folder - This will stop all Oracle EPM components that are installed on the box
2) Run "start.sh" - this will start OPMN, ESSBASE and all other installed components
The "startEssbase.sh" and "stopEssbase.sh" can be used to start or stop ESSBASE only when OPMN is already running.

Similar Messages

  • System error - User not authorized to access requested Info Object!

    Hi, Experts,
    I have a user ID begin with S***, but when I click some links, the following message shows:
    "System error - User not authorized to access requested Info Object!"
    How could I have authorization to see these links?
    Thanks!
    Lorrie

    Hi Lorrie,
    If you are a superuser, you should not get this error.
    If not, you can not change any autohorizations.
    Check it out.  For your job, you have to be a super user.
    Thanks,
    Gordon

  • User not inheriting group properties

    A group has app designer access to a particular app - why doesn't the users assigned to this group inherit this access?

    What documentation did you find this in? I feel like I knocked my head against a wall looking through documentation and never found what you sent. <BR><BR>Any idea when a group is useful if the individual rights override group rights? why bother with groups? Here is what I was looking at that I thought made sense to me:<BR><BR>You can grant security permissions to individual users and to groups of users on an Analytic Server. You can assign users to a security group so that they can share identical minimum permissions assigned at the group level. Users inherit all permissions of the group and can also have permissions that exceed those of the group. Users and groups are managed on a server-by-server basis; users and groups defined on an Analytic Server exist for all applications and databases on the server. <BR><BR>Permissions granted to users and groups take precedence over minimum permissions granted at the application or database level. For more information about security permissions, see About Security and Permissions.<BR><BR>thank you very much for your time.

  • Essbase add-in error:You do not have sufficient access to perform a lock

    Hi,
    I have a user who is doing a retrieve in Excel and is getting this error on v.9.3.1:
    Essbase Error: "You do not have sufficient access to perform a lock and send on this database".
    The user is just doing a retrieve, no lock and send.
    I asked him to disable 'update mode' in add-in options (Mode tab) on each of his sheets.
    But when he open a new sheet/document Excel 2007, the 'update mode' is enabled by default.
    Where can we change that ? Is there a command to put in a .ini file?
    I check all the threads but there no answer on how to change this default setting.
    Thanks for your help,
    Marie.

    Hi Raja,
    Check this out../
    Weird problem regarding Essbase Excel plug in
    It might help
    Regards
    Amarnath

  • User not able to print from SAP

    Hi guys,
                 User is not able to print from SAP. The printer is directly connected to his PC. It is not a network printer. The user is able to print at OS level perfectly. IN SP01, it shows in green and the print job has been completed successfully. I can see the output request. Its all fine in SAP. I am not sure why it is not printing from SAP. Please help ?
    Thanks

    hi venkata,
    did you already defined your printer on SAP Server using tcode SPAD ?
    What kind of printing you're using ?
    My suggest for simplest one is create new output devices.
    Type tcode SPAD
    Give simple name
    Choose SAPWIN for device type (if you're using WIndows clients)
    On Access Method tab
    Choose Host Spool Access Method F : Front end Printing or G :
    For Host Printer fill with __DEFAULT (remember double underscore)
    save and test it.
    ardhian
    http://sapbasis.wordpress.com

  • Having the tab to be not visible for users not authorized to access it

    Hello,
    I've set up an authorization scheme to certain tabs. However, users who are not allowed to access them still have the tabs visible to them. When they click on the tab, they are redirected to a page that contains the error message that they are not authorize to view the page. Is there a way of not making the tabs available at all to those who are not authorize to use it? thanks

    Have you set the same authorization scheme to the tab as you set to the page which is started by the tab?
    If so, you should not see the tab.
    Fred.

  • User not showing after restoring from time machine backup

    I was having issues with my 2009 Macbook pro. took it to the Genius Bar. Diagnosistics all showed ok. (I had done troubleshooting before I had the appointment). They suggested wipe and reinstalll from my time machine backup. I agreed.
    Returned home to do the reinstall. When I went to log in found that one of my user accounts did not show in the log in - only my main and "guest" accounts. On checking the "users" folder the user is present. It also does not show in the system preferences user screen but when I try to recreate it says it exists. Note I have done this wipe and reinstall with Mavericks
    Help! Most of the content I have on my main BUT there are several things that are not.
    Thank you for your attention.

    Issue solved with visit to Genius Bar.
    As I understand it here are the steps the Genius did. Attempt to create the account (system preferences->users) with the same information. It will say it already exists. Very carefully read the options. One will say use the existing account. BE CAREFUL because one option will wipe your data.
    If you need to do this it might be worth the trip to the Genius Bar as you could wipe your data. One precaution I took was to bring a full copy of that user account onto my desktop (from the backup immediately before the wipe) in addition to the one in the user folder. Once we verified that the account was working I moved the desktop copy to the trash and again verified the account (just to be safe).
    Hope this helps someone else.

  • Lotus Notes Error while Accessing from portal page

    Hi,
    I ahve suceesfully installed Lotus Notes Application , i am also
    getting message from when accessing from External Administration
    Link.i have added the Lotus Notes Inbox Portlet to my portal
    page , But here it is showing Authentication Failed (Update
    login information). I again provided all the informtion again ,
    But still it is showing the same error . Can anybody help me
    what to do ?

    Dear
    You will have to create one System for R/3 Server Access, Once you have created that you will have to maintain User mapping for System Access for each individual users, who want to access the DMS Documents from Portal.
    Regards,
    Tushar Dave

  • Users not inheriting edited content???

    Hello all,
    We migrated our organization portal from 6.1 to 6.2 recently and everything went well except for one thing. Users that got migrated from 6.1 have all their roles intact and see all of the channels that were added in 6.1, but if we add channels to their roles in 6.2, they do not automatically inherit these new channels.
    If we delete the users and re-create, they inherit everything as they are supposed to. Any ideas?
    Thanks,
    Jason

    Hi,
    I noticed that too, but I didn't have time to dig deeper.
    My guess is that there is a change in default attributes of merge properies.
    That would explain, why new users have correct profiles.
    Also you could try to play with priorities "conflict resolution level"
    Cheers,
    Alex :-)

  • Employee user not able to access catalogs from EBP

    Hello Seniors,
    We are implementing SRM 4.0 with scenario SSP and CCM 2.0.
    Please note the landscape highlights:
    EBP and CCM component are mounted in the same client and same server.
    CAT and CES are also on same client.
    No XI in picture.
    Catalog upload has been done through CSV format only.
    Please note the activities I have completed:
    Cat_Manager assigned to /CCM/CATALOG_MANAGER role and profile generated.
    Did the customizing for CAT
    Did the customizing for CSE
    Activated the required services
    For the service srm_cse set the log on procedure as "log on data required".
    Maintained a service user "ccm_user" in anonymous log on data.
    Maintained "define external web serices" in SRM img->SRM ->SRM server ->Master data (Here i have a doubt which is explained later)
    Intialized CCM with report.
    Uploaded schema in the master catalog.
    Created supplier ID and catalog.
    Uploaded CSV file for Supplier catalog.
    Mapped Supplier catalog with master catalog
    Published Master cataog.
    maintained entry of master catalog in PPOMA_BBP.
    Now I logged on EBP home page with employee user.
    Went to application shop.
    My master catalog published in CCM component was present there with exact name.
    But when the employee user clicks on the particular catalog link to choose the items from , He is getting an error "" BSP exception: Access to URL /sap/bc/bsp/ccm/srm_cse is forbidden "".
    With this error message immediately the attention goes to the service srm_cse.But there I have maintained a SERVICE user by user ID ccm_user which is existing in SRM SU01.
    In the whole customizing explained above I have two weak points which I want to state now:
    1. The integrated call structure for my particular master catalog was copied from other catalog.
    There i am missing one sr. no. of 70 (ie after 60 , 80 is there).
    But all the values for url, ccm-user, password, sap-client, sap language, locale, catalogID are filled correctly with type as per config guide.
    Do the parameter names should come exactly as per sequence given in guide(In my case it's not so.)
    (If anybody wants to see screenshot for this point pl. give me personal ID.)
    2. I had deleted the entry of my particular master catalog from the external web services to correct the error stated in pt. no 1 .
    But when i tried to create an entry again with the same ID system gave me an error saying that the said catalog is marked for deletion.
    now entry of this particular master catalog is present in table /CCM/D_CTLG_REQ with no x mark in active column.
    But my catalog ID is present in external web services.
    Can point no. 1 and 2 are reasons of the failure to access the catalogs from EBP?
    If it is so then please tell me the procedure to recreate the integrated call structure with same catalog ID.
    Please excuse me for the length of the matter , but i have tried to give every relavant detail so that clarity should be max.
    Best Regards,
    dinesh
    [email protected]

    Hi Dinesh,
    Please see cooments below...
    1. The integrated call structure for my particular master catalog was copied from other catalog.
    There i am missing one sr. no. of 70 (ie after 60 , 80 is there).
    But all the values for url<b>[Adeoye]where did you get your url from? Go to SE80 --> BSP application --> /CCM/SRM_CSE --> Controller -->main.do and check the url</b>, ccm-user, password, sap-client, sap language, locale, catalogID are filled correctly with type as per config guide.
    Do the parameter names should come exactly as per sequence given in guide(In my case it's not so<b>.)[Adeoye] Yes i believe this should be in the satated sequence.</b>
    (If anybody wants to see screenshot for this point pl. give me personal ID.)
    2. I had deleted the entry of my particular master catalog from the external web services to correct the error stated in pt. no 1 .
    But when i tried to create an entry again with the same ID system gave me an error saying that the said catalog is marked for deletion. <b>[Adeoye] Save your deletion first, before trying to create it again.</b>
    now entry of this particular master catalog is present in table /CCM/D_CTLG_REQ with no x mark in active column.
    But my catalog ID is present in external web services.
    I also sent you a cookbook to help with this, hope this helps...
    BR,
    Adeoye

  • Urgent Help needed - Users not able to access webdynpro application in VPN

    Dear Team,
    I've deployed WD application in Portal. users who are in intranet are able to access but users who are accessing through VP, internet and ODC's are getting 404 error not found issue.
    Please help me.
    Best Regards,
    Prasad P.M.V

    Issue is with reverse proxy i was able to resolve

  • Limited account users not able to access oracle 9.2 database

    I have installed oracle 9.2 database on windows server 2003 enterprise, I am having 35 users that login through terminal server to use a application developed in VB6 and uses oracle database, Now if I put all users in administrator group of 2003 everything is working OK , but if I remove them from administrator group they receive the following error after starting the application
    "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed."
    I dont want these users in administrator group as this can be a risk for my setup,but unfortunately I until have no solution for this rahter then keeping them in Administator group.
    Any Help will be greatly appreciated.
    Tahnks

    On the client terminals, you need to install Oralce client software to make sure that the clients and server can communicate. Have you installed it? How the clients are connecting to the database, by some tnsnames or in your application, are you using some DSN or something which is using some tnsnames entry?
    HTH
    Aman....

  • JWS not Inheriting PROXY settings from Netscape

    Hi!
    We are using JWS 1.0.1_01 to launch our application, which needs the proxy settings of the user to connect via SSL to our servers.
    We do not have any problems when the user does not use proxies to access the Internet or uses Internet Explorer as their default browser.
    For users with Netscape 4.* as their default browsers, many users are not able to launch our application, as it can not find the proxy settings.
    They can not download the sample applications of Java Web Start either.
    They work fine if they make Internet Explore as their default browser or set the proxy manually in Java Web Start.
    As our customers use some sort of scripts for proxy configurations we do not want to set the proxy manually in Java Web Start.
    We want to use the proxy settings of the browser.
    So I want to know if there is a known issue with Java Web Start not detecting the proxies automatically from Netscape.
    Any help appreciated.
    Thanks
    -Nawaz

    Basically web start can only pick up the settings of whatever
    happens to be the current Windows default browser. If that's Netscape then the Netscape settings will be used.
    Since your clients are using a script to specify the proxy settings you should also be aware that there's an issue with web start 1.0_01 where it locates the proxy setting based on the first occurrence of the word "Proxy" in that script. This can cause issues if the first proxy
    listed is for https only of even if the first occurrence of "proxy" is
    inside a comment.

  • Lync 2013 - Hide users not enabled for Lync from Lync AB

    Ok - so here is the environment
    Lync 2010 - preparing to upgrade to 2013
    Exchange hosted on O365 only, so no exchange schema in the local domain.
    There are tons of service accounts and other non-user accounts, as well as disabled users for previous employees that still show up in the Lync AB.  I understand how in 2010 to add an attribute and modify the AB behavior to hide users like this, but
    I am concerned that when we upgrade to 2013 in the near future, I won't be able to hide these users.
    Is there a method to modify the behavior of the Lync 2013 AB service to not grab and index users?

    You'd want to use ABSConfig for this.  Is that what's in place now?  Most of the documentation is around Lync 2010 for this, but it is included in the 2013 resrouce kit and should work with 2013.
    http://www.justin-morris.net/how-to-hide-users-from-the-lync-address-book/
    http://www.microsoft.com/en-us/download/details.aspx?id=36821
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Users not populated into OID from 11i

    Hi,
    I set up bidirectional integration between OID and 11i. No error and successfully.
    The user be created in OID automaticlly populated into 11i.
    But, somehow, the user created in 11i is NOT in OID. No any error in oid debug.
    The profile 'Applications SSO Enable OID Identity Add Event" is enable.
    Anything I have to set it up? how I can trace the event?
    Thanks
    Paul

    2.11 Users created in E-Business Suite not propagated to OID
    * Is E-Business Suite set to propagate users to OID?
    How To Verify profiles APPS_SSO_IDENTITY and APPS_LDAP_SYNC
    If Not See profiles related to Synchronization
    * Do the relevant WorkFlow events get created?
    How To 5.3.5 Listing Workflow events
    If Not 2.19 WF events are not created
    * Do the events still exist in WF_ENTITY_CHANGES?
    How To WF Pending Events
    * Is OIDSRV running?
    How To 5.7 ODISRV
    If Not See 5.8.1 Start ODISRV
    * Does the provisioning profile AppsToOID exist?
    How To Look for the cn=AppsToOID in 6.12 List Provisioning Profiles
    If Not Proceed to 4.2 Cannot add/remove provisioning profile template 6.14 Reregister the Instance in OID
    * Is the provisioning profile AppsToOID enabled?
    How To Look for orclstatus and orclsubscriberdisable attributes at 6.12 List Provisioning Profiles
    6.12 List Provisioning Profiles
    If Not 6.13 Enable/Disable Provisioning Profiles
    * Is the last status Event Propagation Successful for the AppsToOID provisioning profile?
    How To Follow the steps in 6.12 List Provisioning Profiles.
    Check orclodipprofileprocessingstatus, orclodipprofilelastprocessingtime, and orclodipprofilelastappliedappeventid (Apps->OID).
    If Not Verify the error shown in the orclODIPProfileProcessingErrors attribute. Most errors are self-explanatory
    ODIException: ODI Exception in Filter Processing: ODIException: GUID Not Found in Directory..Fatal Error..      Missing entry at OID, check the AppDN, RealDB and user orclguid.
    DIP_DB_ERROR_CONN ODIException: DIP_DB_ERROR_CONN      Error trying to connect to database, review that hostname, sid and port are valid. Validate that hostname is valid from the OracleAS 10g host
    As of today, no reports have been filed with successful status and failed provisioning from Apps to OID. If this is the case, provide Oracle Support with:
    * ODISRV logs generated with debug=2047, see 5.7 ODISRV
    * Listener logs, database logs or OID logs (see extensive logs), depending on the exact error.
    extensive logs), depending on the exact error.

Maybe you are looking for

  • Newbie needs help with multiple devices?

    Hi and best wishes to all. I could really use some advice on the following. I purchased an iPhone and set it up on my PC in the normal way. A few months later, my Creative Vision battery died, and Creative's only advice was "buy a new one!". No chanc

  • Is there a way of installing/transferring previously bought apps from an old account onto a new account?

    Hi, On my iPhone I started with an old apple ID and downloaded numerous amounts of free and paid apps over the period of using it. Since then I have now created a new ID, the old apps remain on my device but obviously they are not owned by myself any

  • URGENT HELP WITH BLACKBERRY ID!

    Hello,  I have a persistent problem with my BlackBerry ID. When I registered I stupidly entered my email address without the number in it, so it was incorrect. Unfortunately, this is the only email address the phone recognizes, so when I type in my a

  • Text is fuzzy

    I laid out some pages in DreamWeaver CS3 with a background image I applied to the page using the page properties window. The image is set not to repeat. In older versions of Internet Explorer the text is smeared like a bad fax where the background im

  • Problems stopping a Thread

    HI all I'm %$&�* with this problem!!! I'm 3 hours trying to solve it! I have a BufferedReader associated with a socket this way BufferedReader in = new BufferedReader(new InputStreamReader(socket.getInputStream()));So I read from the socket this way: