Essbase 7.1.3 rules support SQL 2008

Hello All,
We have some rule files which retrrive data from SQL 2005 and we have upgraded to SQL 2008 now since then we are unable to connect to the sql server using the essbase rules.
Did any one know whether MS SQL 2008 support essbase 7.1.3 rules?
Thank You

I think it would be dependent on the ODBC drivers you are using not Essbase itself.

Similar Messages

VMM 2008 R2 SP1 support SQL 2008 R2 SP2?

I plan to install service pack SP2 to SQL 2008 R2 SP1 which host OM and VMM Database. Does VMM 2008R2 SP1 support this version of the SQL server?
As i know OM2007R2 supportes SQL2008R2 SP2 since CU4.

Is SQL Server 2008 R2 SP1 supported on Windows Server 2008 R2 SP1? I've found this website
You have mentioned windows Server 2008 R2 SP1, it works and supported.
https://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx
If you are talking about Windows Server 2008 then you might need SP2
SQL Server 2008 R2 is not supported on:
Any version of Windows Server 2008 less than Windows Server 2008 Service Pack 2

Transact-SQL debugger not working in SQL Server 2008: "...debugger does not support SQL Server 2005 or earlier..."

I have recently installed SQL Server 2008. When I try to execute a query against an Access database, I receive this debugging error:
"Unable to start Transact-SQL debugger. The Transact-SQL debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors)"
Nor will the query execute; I get a transport-level error 0. Any thoughts?

Hi Davidmhjr,
>>Unable to start the Transact-SQL Debugger. The Transact-SQL Debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors).
Have you tried to restart the server once you have installed SQL Server 2008? As Naomi N mentioned please check the version of SQL Server you are using.
If you tried to connect to SQL Server 2005 from SQL Server 2008 SSMS, you would not be able to debug and get this error, it happens because T-SQL debugger includes both server-side and client-side components. The server-side debugger components are installed
with each instance of the SQL Server 2008 Database Engine. The client-side components are installed when you install the SQL Server 2008 client-side tools.
So it works with SQL Server 2008 only so far. Another way is you can triy to use SQL Server 2005 SSMS to connect to SQL Server 2005.
More information about configuration requirement to run T-SQL debugger as below, please refer:
There are no configuration requirements to run the Transact-SQL debugger when SQL Server Management Studio is running on the same computer as the instance of the SQL Server Database Engine. However, to run the Transact-SQL debugger when SQL Server Management
Studio is running on a different computer from the instance of the Database Engine, you must enable program and port exceptions by using the Windows Firewall Control Panel application on both computers.
On the computer that is running the instance of the Database Engine, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add the program sqlservr.exe to the exceptions list. By default, sqlservr.exe is installed in C:\Program Files\Microsoft SQL Server\MSSQL10.InstanceName\MSSQL\Binn, where InstanceName is MSSQLSERVER for the default instance, and the instance name for
any named instance.
•If the domain policy requires network communications to be done through IPsec, you must also add UDP port 4500 and UDP port 500 to the exception list.
On the computer that is running SQL Server Management Studio, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add program ssms.exe (SQL Server Management Studio) to the exceptions list. By default, ssms.exe is installed in C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE.
Hope it is helpful.
Regards, Amber zhang

BPC 7.5 SP4 Support for Windows 2008 R2 and SQL 2008 R2

The release notes for BPC 7.5M SP04 state that support has been added for both Windows 2008 R2 and SQL 2008 R2.
For SQL 2008 R2, there is nothing in the feature pack described as "SQL 2005 Backward Compatibility Components" - which was a required piece for BPC 7/7.5 on SQL 2008. Is the SQL 2008 version still a requirement, or does BPC 7.5 now not need the Backward Compatibility components?
Also, the ReprotViewer executable that is packaged with BPC 7.5 is the one for SQL 2008- will that work when installing SQL 2008 R2?
thanks,
Tony DeStefanis
Column5 Consulting

Hi,
we have the same environment (BPC 7.5 SP4 on Windows 2008 R2 64 bit and SQL Server 2008 R2 64bit).
we are developping our application-set and for the moment we have no problem.
regards
massimo

TFS 2010 Support for SQL 2008 R2 SP3

Does TFS 2010 support SP3 on SQL 2008 R2?
Based on this link only SP2 is supported.
http://msdn.microsoft.com/en-us/library/vstudio/dd631889%28v=vs.110%29.aspx
Thanks

Hi Aravind100,
Thanks for your post.
As far as I know SQL Server 2008 R2 SP3 support TFS 2010. I think that document has not been updated after SQL Server 2008 R2 SP3 released.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What host support MS SQL 2008

Does anyone know of a hosting server that offers MS SQL 2008?
The complete System requirements are
Windows hosting environment.
Coldfusion 8
Microsoft SQL Server 2008
I am told we need SQL Server 2008 because we need to be able
to store polygon and polyline data.

"DC_Eric2" <[email protected]> wrote in
message
news:go6vk0$946$[email protected]..
> Does anyone know of a hosting server that offers MS SQL
2008?
>
> The complete System requirements are
> Windows hosting environment.
> Coldfusion 8
> Microsoft SQL Server 2008
>
> I am told we need SQL Server 2008 because we need to be
able to store
> polygon
> and polyline data.
http://www.hostmysite.com/hosting/coldfusion/
Massimo Foti, web-programmer for hire
Tools for ColdFusion, JavaScript and Dreamweaver:
http://www.massimocorner.com

Cannot see new SQL 2008 R2 Express instance on Small Business Server 2011!

Hi,
As it is stated on the subject line, I'm having a problem after I did a new install of SQL 2008 R2 Express and put a new instance on SBS 2011.
I'm developing a new program using SQL 2008 in C# and VB.Net. I have SQL 2008 R2 Express installed on my computer called "MSQL8R2EDATA" on my PC. Now I need to deploy it on SBS 2011 so I can do some testing on other workstations.
I'm currently running Windows 7, 64 bit, and it's named STEVE-PC. The SBS 2011 is named SERVER1, and it's 64 bit as well.
After installation on SERVER1 (SBS 2011), I then fired up SQL Server Configuration Manager and enabled Named Pipes, TCP/IP, and VIA.
After I've completed the SQL Configuration on SERVER1, I went back on my PC (STEVE-PC) and I tried to use Management Studio to connect to the new instance MSQL8R2EDATA on SBS 2011, only problem is, I only see the computer name, not the new instance
I've installed.
Back on SBS 2011 (SERVER1), I've verified that all the protocols are enabled, and the SQL Server Browser is automatically loaded and currently running, as well the MSQL8R2EDATA instance is automatically loaded and running, yet I still cannot see
it from my PC (STEVE-PC). I even switched from dynamic ports to a static port of 64719 (that was what the MSQL8R2EDATA was listening on that port when it was dynamic), and then added new rules to the Windows Firewall for program of the SQLSERVR.EXE, and
for UDP and TCP for port 64719 to "Allow All Connections" for Domain, Private, and Public; yet I still cannot connect SERVER1\MSQL8R2EDATA. I even disabled the firewall and then trying to connect once again to SBS 2001 and it still fails.
In case you're wondering, I left it on port 64719 since there are other active SQL Servers on SBS 2011 (SharePoint, SBSMonitoring, and ACT7).
Interestingly, when I run Management Studio on SBS 2011, I can see STEVE-PC\MSQL8R2EDATA and I'm able to log in and connect to it.
So what's going on here?!? Why am I able to connect to STEVE-PC which is Windows 7 64 from SBS 2011 (SERVER1), but I cannot connect from my computer to that instance on SBS 2011??
I really could use some big time help on this.
EDIT: Sorry for the confusion, but on the Windows Firewall (WF.msc), I did add new rules for incoming connections on:
Program incoming connections to SQLSERVR.EXE
TCP Port 64719
UDP Port 64719
EDIT: To further assist, I have Management Studio installed on the SBS 2011, and I can locally log in and connect to the MSQL8R2DATA on SERVER1 with success. I even tried tcp:SERVER1\MSQL8R2DATA and again it is successful log-in and connection.
Thanks in advance!
Steve

Hi,
Thanks for the response, but I have a question:
Installing SQL Express or SQL Server is not recommended on SBS
2011 because it is a DC, however technically it will work.
I'm a newbie when it comes to SBS 2011 and I'm taking a crash course on the subject. Can you explain to me what you mean by "DC"? Also, why
isn't recommended to install a new instance on SBS 2011?
As I also stated, I've added "New Rules" to the Windows Firewall to allow incoming connections on port 64719 for both TCP and UDP, and I also allowed incoming connections for SQLSERVR.EXE but no joy to connect to the SERVER1\MSQL8R2EDATA.
And yes, I can log-in and connect locally on SERVER1 using Management Studio with success. I even used tcp:SERVER1\MSQL8R2EDATA with the same success. It's my workstation STEVE-PC that fails. If that fails, then the rest of the workstations are going to fail.
Are you suggesting that I put the SQL Server 2008 Express on another workstation and just allow to to be
accessed that way?

Windows 2003 server and SQL 2008

Hi
Does SAP Business one support windows 2008 and sql 2008 platforms?
When i checked the partner portal it says that these platforms are not supported.Is there any update?
Regards
Louis

Hello Louis,
The only way to determine this is via the supported platforms page in the portal. This is the most up to date, and will include information for the future when this data is available. So for not I would only plan with what information is available.
Regards,
Paul Finneran
SAP Business One Forums Team

Visual Studio prevents SQL 2008 Express installation on win 8.1

I wanted to install SQL Express 2008 on my Win 8.1 desktop. It gives an error indicating that I should install Visual Studio 2008 SP1 first. I tried, but SP1 installation fails. I also tried to remove VS2008 completely but I still get the same fail when
installing SQL 2008 Express.
Now I cannot even install SQL Manager 2008, to manage database on SQL server.

Hello,
You should install SQL Server 2008 Express with SP3 included to make it compatible with Windows 8.1. Please try the following download:
http://www.microsoft.com/en-us/download/details.aspx?id=27597
For more information, please read the following article:
http://support.microsoft.com/kb/2681562
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SQL 2008 R2 small business server OS edition check fails on SBS 2011 premium install on SBS member server.

I am having trouble installing SQL 2008 Small Business Edition on top of MS 2008 std from the SBS premium suite. I recieve the SQL Server 2008 R2 setup log error stateing "Operating system supported for edition "Failed". The specific error is "EditionRequirementCheck
Failed" This SQL server edition is not supported on this operating system.
The SQL 2008 server is a valid SBS domain member server and sees the SBS domain just fine. I have tried re-installing the OS. Not selecting any options except the SQL engine, verbose logging as per How to diagnose "Operating system supported for edition"
pre-requisite errors while installing SQL 2008 Standard Edition for Small Business with no success. (no log.txt generated), enabled browsing, and other items with no luck.
I got the software from MVLS under the specific SBS 2011 premium section. It doesnt seem right or sees something to keep it from installing. The SBS AD box is clean with all FSMO and root functions assigned to it. There are no trust relationships or
child domains. I have licenses for 75 users. Of course there is no tool, log or utility to find what the actual issue the SQL installation is seeing. SOS! Help!!!

I meet all prerequisites that can be verified.
I am installing it on the SBS Premium Server 2008 R2 OS from MVLS with the ISO file ending in 29732.
I am on a valid SBS 2011 domain.
The new SQL box is joined to the domain as a member server.
THe SBS server contains alll FSMO roles and is the root of the AD.
There are no trust relationships or child domains.
There is NO way that I can find to determine the number of user and device licenses that it "senses" on the domain. I dont know which ones to count. I am licensed for 75 users and have less than that useing the network. There is no licensing monitor or meathod
I can find to actually verify what the SQL install sees.
I am doing all this logged in as the domain admin.
The troubleshooting steps at the bottom of the post refrenced do not work or I am doing them wrong. I cannot find an output file when I enable verbose logging for the SQL install. I believe if I figure out how it may point the way to the block. Thanks

SQL 2008 SP1 to SQL 2008 R2 Upgrade

I have a SQL server running SQL 2008 SP1 and am trying to upgrade to SQL 2008 R2. The server has an installation of SCOM 2007 R2 with CU4 on it with reporting services and SCOM data warehouse
The SQL upgrade advisor runs and tells me that Custom report items were detected on the report server and 3x Custom extensions or assemblies were detected on the report server
If I actually try to run the upgrade I get a 2 failures in the Upgrade Rules check:
No Custom Security Extensions and No Custom Authentication Extensions
I can see that the file rsreportserver.config has the custom entries relating to the scom data warehouse user so it is possible to change this file back to the original config file that was present before installing scom data warehouse and then run the sql
upgrade and then put the config file back?

Hi Mickpell,
Me too facing the same issue while upgrading from SQL 2008 SP1 to SQL 2008 R2. Getting below error:
No Custom Security Extensions and No Custom Authentication Extensions
Did u follow the steps you mentioned and it is Success???. Could you please confirm. If it was success, I can proceed with the same steps. Thanks in advance!!! I am
using SCOM 2007 R2 CU5. Should I download latest Hotfix Utility or CU2 utility is enough???
Regards, Suresh

Sharepoint 2010 SQl 2008 r2 Reporting Services Integrated with Claims

i have a 4 server sharepoint 2010 farm all servers are windows 2008 r2 x64
two severs are sharepoint app/wfe servers
one server is SQL sharepoint content db server sql 2008 r2 enterprise
one server is SQL Claims Provider DB and reporting services on SQL 2008 r2
the site is behind a forefront tmg proxy firewall for both internal and external users and both locations are producing the same results.
the web application i am having an issue with consists of a primary web app claims enabled web app that only has NTLM enabled, with an extended extranet webapp that supports claims and NTLM.
there is surrently a site collection that has been configured for reporting services when i log into the site as a SQL Claims user i am able to run the reportbuilder as a content type using the New Report builder report content type from a library on
this site. Reportbuilder launches and i am once gain prompted to login i login with the same credentials i used to log into the site and reportbuilder opens up and then i am able to open datasourceas and reports.
When i log in to the same site collection as a domain user i am able to log in to the site and launch reportbuilder. When reportbuilder opens up i am prompted to log in, i insert my domain\username and password and nothing happens the login prompt appears again
blank on the back end it throws the following exceptions
1. Password check on 'username' generated exception: 'System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException:
The security token username and password could not be validated.).'.
2.An exception occurred when trying to issue security token: The security token username and password could not be validated.
any thoughts on where i should begin troubleshooting this.

I think i am getting close i am now seeing a new error it seems that the sp farm account is unable my domain account when launching reportbuilder.
vent code: 4006
Event message: Membership credential verification failed.
Event time: 4/6/2014 10:59:05 AM
Event time (UTC): 4/6/2014 2:59:05 PM
Event ID: 7640af98dab846829f78e7d74a4e1e8a
Event sequence: 9
Event occurrence: 8
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/SecurityTokenServiceApplication-1-130412687342754349
    Trust level: Full
    Application Virtual Path: /SecurityTokenServiceApplication
    Application Path: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\SecurityToken\
    Machine name: (SP WFE MACHINE NAME)
Process information:
    Process ID: 8044
    Process name: w3wp.exe
    Account name: (SP FARM ACCOUNT)
Request information:
    Request URL:
    Request path:
    User host address:
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: (SP FARM ACCOUNT)
Name to authenticate: (doamin account launching reportbuilder)
Custom event details:

Error in sql 2008 reporting services with sharepoint 2013

i have database sql 2008r2 and sharepoint 2013 enterprise
database is in cluster server and sharepoint have 2 servers one for webfront end and one for services.
im tring to configer ssrs in the web front end server for sharepoint and i install sql 2008 add on for sharepoint 2010 but still have this error
The configuration parameter SharePointIntegrated is set to True but Share
Point Object Model cannot be loaded. The error was:
System.IO.FileNotFoundException: Could not load file or assembly
'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot
find the file specified. File name: 'Microsoft.SharePoint, Version=14.0.0.0,
Culture=neutral, PublicKeyToken=71e9bce111e9429c' at
Microsoft.ReportingServices.SharePoint.Objects.RSSPImpSecurity.set_StaticCatchAccessDeniedException(Boolean
value) at
Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelper..ctor() at
Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelperFactory.get_ServiceHelper()
WRN: Assembly binding logging is turned OFF. To enable assembly bind failure
logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]
(DWORD) to 1. Note: There is some performance penalty associated with assembly
bind failure logging. To turn this feature off, remove the registry value
[HKLM\Software\Microsoft\Fusion!EnableLog]. .
(rsSharePointObjectModelNotInstalled)
and befour that i was install sql 2012 add on for sharepoint 2013 but was the same error so i did uninstall for it
this error when i try to open reporting services url
Thanks for any help :) my blog is: http://www.waelk.com

SharePoint 2013 only supports SSRS 2012 SP1 - http://msdn.microsoft.com/en-us/library/gg492257.aspx. You'll need to upgrade your SSRS instance to 2012 SP1.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Want to Buy SQL 2008/2012 standard edition to achieve Database failover

Hi Team,
We want to know exact part code details to procure 2 nos Sql 2008/2012 standard edition server to installed on "Window 2012 R2 Standard Edition, Factory installed, no media, 2 socket,2 VMs, No client" Server.
I have Access control system application (Main-Standby) on which we need Automatic database failover by using SQL Standard server. Application vendor has suggested us to procure 2 nos of Microsoft Sql 2008/2012 standard edition server.
If possible then please let me know exact part code details of Sql 2008 and 2012 standard edition server which doesn't have any issue to installed on above said server edition.
Thanks,
Vishal

Hi Vishal,
Unfortunately, we do not deal with part codes, I request you to check the below link as this is not the correct forum.
http://www.microsoft.com/en-in/server-cloud/products/sql-server/Support.aspx
Perhaps you could post you question on the SQL forum :
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
Regards,
Mekh.

SQL 2008 R2 Express Install Failure

An attempt to install SQL 2008 R2 Express results in failure - Fusion Active Template (.ATL) file failure. Is there a way to correct this failure? Thank You

Did you checked below link
http://stackoverflow.com/questions/16417130/rule-fusionactive-template-library-atl-failed-during-sql-server-2008-r2-instal
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Essbase 7.1.3 rules support SQL 2008

Similar Messages

Maybe you are looking for