Essbase 9.3.1 and Windows Server 2003 SP2

Is anyone successfully running Essbase 9.3.1 on Windows Server 2003 SP2 ?
The documentation I have mentions only SP1, but we'd like to upgrade to SP2 providing no issues arise from doing so.
thanks,
Svejk

There are no problems running on SP2.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

AFP and Windows Server 2003 (SP2)

Hello,
I have a problem when i connect my MAC with Windows Server 2003 by a AFP connection the connection drops after +/- 10 min. I need this AFP connection because i work with a OMNIS database that locks when i use a SMB connection.
Can somebody tell me why the connection drops after a while ?
Thanks already,
Marco

Hi Karen
Unfortunately, re-posting to a different forum category
doesn't help. Almost all of us here are already watching all the
categories. If an answer is known, we normally pounce on it to try
and help. So your situation is probably pretty unique and eluding
us.
Please direct any replies to this question to where it was
originally asked by
clicking
here.
Cheers... Rick

BOE XI R1 and Windows Server 2003 SP2

Hi there,
Our admin will install SP2 on the Windows Server 2003 and there is BOE XI R1 on it.
Are there some knowing problems for this installation?
Can somebody help?
Thanks
Thierry

We are on XIR2 and its working fine.
However it doesnt cause any issue for XIR1 as i haven't seen any know issues on it.
Note: Have a back up of all those specified earlier.
Regards,
Ramsudhakar..

Which VMware support Windows 7 as Host and Windows Server 2003 as Guest OS

Folks,
Hello. I need to install PeopleSoft PIA in Windows Server 2003.
Because my laptop is preinstalled Windows 7 Home Premium Editon and cannot dual boot multiple Operating systems. I have to install VMware in Host Windows 7 and then install Windows Server 2003 as Guest OS for PIA.
I have installed VMware Server 2.0.2 into Host Windows 7 and Windows Server 2003 as Guest OS. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333/ui cannot display any more.
I have found that Windows 7 is not a supported Host Operating System for VMware Server 2 and strange thing might happen anytime. I found that "VMware Player 3" is fully supported Windows 7 as Host OS but is not supported Windows Server 2003 as Guest OS.
Does any folks know which VMware product support Windows 7 as Host OS and Windows Server 2003 as Guest OS ?
Many thanks in advance.

Hi,
Based on my research, I would like to suggest the following:
1.
Ensure the printer is compatible with Windows 7 and Windows Server 2003 and the drivers are up-to-date.
2.
Try the following method:
Printers that use ports that do not begin with COM, LPT,
or USB are not redirected in a remote desktop or a terminal services session
Hope this helps. Thanks.
Regards,
Nicholas Li - MSFT
That doesn't apply to Windows 7 Machines. I'm having the same problem as Acer_, I have a RDP Session from a Windows 7 Machine to a Windows XP machine and the local printer was available a few days ago but isn't anymore. The drivers are installed on both PC's
and are compatible with Windows 7.

Accessing to Windows Server 2003 SP2 R2 32-bit from a Windows XP SP3 32-bit leaves a fork of the explorer and its children processes !!!

When I try to access to Windows Server 2003 SP2 R2 32-bit from a Windows XP SP3 32-bit and then closes the RDP from Windows XP (the client side), a fork of the explorer and its children processes will persist in the server side !!!
Take a look at the screenshot to understand:
is this normal behavior !?
Thank you for your understanding ;)

Hi,
I think this is normal behavior.
You just close the RDP from client side but not log off the server, right?
Regards.
Vivian Wang
Yes, right I closed the RDP from client side, not log off the server.

RC-50004: Fatal: Error occurred in ApplyAppsTechStack: While Installatling EBS R12 on window server 2003 SP2

Hi Mr.Hussain,
Can you please guide me how to solve this error,
i am trying to install oracle EBS R12.1.1 on windows server 2003, i am following your document, installation of EBS R12.1 in windows server 2003 SP2
i did stage everything going right, even i did md5sums for the extracted file of EBS R12 folder.
i stated installation, even installation done perfectly at the end of installation 2 Command Prompt windows appear and stopped, i try to open log file from oracle installation folder, i got this message at the end of log file
3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver c:\oracle\PROD\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for PROD instance
can you please guide me how to solve this error,

This is a generic error so you would need to check the installation log files for details about the error.
Please see if (Rapidwiz 12.1.1 Fails To Execute Ouicli.Pl During Apps 10.1.3 Techstack Autoconfig (Doc ID 1328464.1)) is applicable.
Thanks,
Hussein

Windows Server 2003 (sp2 - 32bit) - OEM problem

I inherited this in-house (closed) system a few years ago and have not had a problem until a couple of months ago. It has been running for about 1 1/2 years.
Desc:   Oracle 11.1.0.6 (64bit) on Windows Server 2003 (sp2 - 32 bit)   [[ yes, I know, what the heck is a 64 bit Oracle running on a 32 bit windows?]]
     2 - instances running - one production with associated ASM, one RMAN cat with no ASM - all folders are backed up to a large SANS.
          - each instance has its own listener
          - each instance has its own dbconsole service
Problem:
1. a couple of months ago, when I attempted to access the production OEM, I started seeing
service-specific error 1 (0x1), NET HELPMSG 3547
     -- the first time this happened, I immediately opened the OEM for rman and it was successful
          It was also fortunate in that we were doing some power upgrades and all of our systems were shutdown - and after this system was powered on, the production OEM worked fine.
     -- a few weeks later, the prod OEM was not accessible - giving the same 3547 error. We were not able to shut down, so I stopped the Windows services for this instance, and stopped
               the windows listener services for both instances. I then started only the production windows services, and was able to use the prod OEM. Then I started the listener service for
               the rman and all was well.
     -- this Monday (today is Thurs), the prod OEM was inaccessible again and I tried the stopping and restarting of the services and started seeing 7024 errors. I tested the rman OEM and
          it was fine. I stopped both instances via sqlplus commands, used emctl to stop both dbconsoles (of course, the prod one was already not running), shut down the ASM instance and
          then stopped all the Windows services. then I only brought up the prod services and confirmed with sqlplus commands that everything was started - but the final service, dbconsole
          would not start. This morning I was able to reboot the server (after shutting down all the Oracle services) and now I can access the prod and the rman OEMs.
2. What the heck?   Because I can get the prod OEM working with just a reboot, I don't know if I should have to rebuild dbconsole.   And since I'm the only one disuncombullated because
          of the prod OEM, it is not a fall-down-crying situation - I'm actually a sqlplus kinda guy, but when I'm just doing visual maintenance, it is nice to view OEM remotely for a quick check.
3. I've been working with Linux systems and Oracle for many years and I've never experienced this kind of problem.   Oh, and since it is a closed system, it will be when pigs sprout wings
               and start flyng that I'll be allowed to install patches - but again, if a reboot 'fixes' this issue, what the heck? Oh, finally, I don't believe in the common windows fix of rebooting - I'd
               like to find out WHY this is happening and literally fix it.
ANYBODY have a clue?   Not me...
Thanks for your time.

user12183171 wrote:
I inherited this in-house (closed) system a few years ago and have not had a problem until a couple of months ago. It has been running for about 1 1/2 years.
Desc:   Oracle 11.1.0.6 (64bit) on Windows Server 2003 (sp2 - 32 bit)   [[ yes, I know, what the heck is a 64 bit Oracle running on a 32 bit windows?]]
You'd better double check that. It is fundamentally impossible for 64-bit software to run on a 32-bit OS.
     2 - instances running - one production with associated ASM, one RMAN cat with no ASM - all folders are backed up to a large SANS.
          - each instance has its own listener
One single listener, with the default name of LISTENER, using the default port of 1521, is quite capable of -- indeed, was designed to -- service multiple instances of multiple versions running from multiple homes.
          - each instance has its own dbconsole service
Problem:
1. a couple of months ago, when I attempted to access the production OEM, I started seeing
service-specific error 1 (0x1), NET HELPMSG 3547
     -- the first time this happened, I immediately opened the OEM for rman and it was successful
          It was also fortunate in that we were doing some power upgrades and all of our systems were shutdown - and after this system was powered on, the production OEM worked fine.
     -- a few weeks later, the prod OEM was not accessible - giving the same 3547 error. We were not able to shut down, so I stopped the Windows services for this instance, and stopped
               the windows listener services for both instances. I then started only the production windows services, and was able to use the prod OEM. Then I started the listener service for
               the rman and all was well.
     -- this Monday (today is Thurs), the prod OEM was inaccessible again and I tried the stopping and restarting of the services and started seeing 7024 errors. I tested the rman OEM and
          it was fine. I stopped both instances via sqlplus commands, used emctl to stop both dbconsoles (of course, the prod one was already not running), shut down the ASM instance and
          then stopped all the Windows services. then I only brought up the prod services and confirmed with sqlplus commands that everything was started - but the final service, dbconsole
          would not start. This morning I was able to reboot the server (after shutting down all the Oracle services) and now I can access the prod and the rman OEMs.
2. What the heck?   Because I can get the prod OEM working with just a reboot, I don't know if I should have to rebuild dbconsole.   And since I'm the only one disuncombullated because
          of the prod OEM, it is not a fall-down-crying situation - I'm actually a sqlplus kinda guy, but when I'm just doing visual maintenance, it is nice to view OEM remotely for a quick check.
3. I've been working with Linux systems and Oracle for many years and I've never experienced this kind of problem.   Oh, and since it is a closed system, it will be when pigs sprout wings
               and start flyng that I'll be allowed to install patches - but again, if a reboot 'fixes' this issue, what the heck? Oh, finally, I don't believe in the common windows fix of rebooting - I'd
               like to find out WHY this is happening and literally fix it.
ANYBODY have a clue?   Not me...
Thanks for your time.

Auto rollback with no error when upgrading windows server 2003 sp2 to windows server 2008 R2

Hi, I have a server needs to upgrade from windows server 2003 sp2 to windows server 2008 r2.
It should be supported from technet site
And yes, it went through all the list of upgrade. After rebooted, it told me "the upgrade was not successful, Your previous version of windows is being restored. Do not restart your computer during this time.".
Is there a place located the upgrade failure log? What's the common cause about the auto roll back?

Thanks for the reply.
I copied some sentences in Setuperr.log
2014-07-10 23:58:33, Error
Failed to find driver file path. Error=00000002x[gle=0x80092004]
2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.cnt' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.hlp' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-11 00:06:19, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll,
{8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
2014-07-11 00:06:20, Error      [0x08085e] MIG    UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll]
does not exist.[gle=0x00000003]
2014-07-11 00:13:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll,
{743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
2014-07-11 00:18:56, Error      [0x0803db] MIG    IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\####\NTUSER.DAT; giving up (2).[gle=0x00000003]
2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service
usbhub20.
2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setupact.log[gle=0x000003f0]
2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setuperr.log[gle=0x000003f0]
Is it caused by driver error, MediaPlayer-DLMigPlugin.dll
and drmmgrtn.dll?

JDK issues with Windows Server 2003 SP2 Standard Edition

Hi,
We are running an ETL (Extracts-Transform-Load) Jar file which reads data from MS Commerce Server 2002, AS400 and SQL Server 2000 database and populates a SQL Server 2000 database. The jar was running fine on Windows Server 2000 but started to stall when we are running it from our newly acquired Windows Server 2003 SP2 server class machine. The JDK version is 1.4 on Windows 2000 and 1.6 on Windows Server 2003. Interestingly, the jar is running fine via JDK 1.6 on another Windows Server 2003 dev machine.
The jar does not throw any error and we have to manually shutdown the execution of the jar.
Can anyone please suggest some solutions here?
Thank you!

Um, does this have anything to do with JavaMail? If not, you might try a more appropriate forum.

JDK issues with Windows Server 2003 SP2

Hi,
We are running an ETL (Extracts-Transform-Load) Jar file which reads data from MS Commerce Server 2002, AS400 and SQL Server 2000 database and populates a SQL Server 2000 database. The jar was running fine on Windows Server 2000 but started to stall when we are running it from our newly acquired Windows Server 2003 SP2 server class machine. The JDK version is 1.4 on Windows 2000 and 1.6 on Windows Server 2003. Interestingly, the jar is running fine via JDK 1.6 on another Windows Server 2003 dev machine.
The jar does not throw any error and we have to manually shutdown the execution of the jar.
Can anyone please suggest some solutions here?
Thank you!

Um, does this have anything to do with JavaMail? If not, you might try a more appropriate forum.

How to install Windows updates for Windows server 2003 SP2 Manualy

Hi All,
We have 10 machines running Windows server 2003 SP2. These machines are ISA servers kept in DMZ.
So these servers do not have internet access any any means. We are receiving Non compliance for not patching them for specific .NET framework patches. We have installed them but still the Scanning tools says it is not installed.
We have planned to check it through Windows update but as it is in DMZ there is no Internet connection and we also cannot push through WSUS server as well.
Is there any way we can get the update package in Bulk so we can manually patch them rather than manually downloading them 1 by one and installing them ?
Gautam.75801

Hi Gautam,
To achieve your goal, I suggest you set up a WSUS server on the disconnected network, then exporting updates and metadata from a
WSUS server on a connected network and importing all that information into the WSUS server on the disconnected network.
For more detailed steps, please refer to this article below:
Set Up a Disconnected Network (Import and Export Updates)
https://technet.microsoft.com/en-us/library/cc720512(v=ws.10).aspx
In addition, here is a WSUS forum below if there is any WSUS related question:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverwsus&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

WebLogic Server 9 with Windows Server 2003 SP2

Hi,
DO you know if Weblogic 9 can work without any problem on a Windows Server 2003 SP2? I looked an i only find that it's supported on Windows Server 2003 SP1.
Hope you can help me
Greetings
Norberto

We are seeing alot of these - using the 'retry' option when scheduling gets the Publication to finish successfully - the log however is full of these messages.
Did you discover anything further Ranjit?
Regards,
Ferdie.

Flex and Windows Server 2003 and MSSQL

Hi everyone,
I tried to connect to MSSQL using PHP. I did not get any
error message but the only problem is when I try to test the
problem, I get this error message. Everything works fine on my
local computer "developer", but when I try to program and test on
my Windows Server 2003, I get this error message:
ReferenceError: Error #1069: Property loginsuccess not found
on String and there is no default value.
at index/::checkLogin()
at index/__login_user_result()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.rpc.http.mxml::HTTPService/
http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::resultHandler()
at mx.rpc::Responder/result()
at mx.rpc::AsyncRequest/acknowledge()
at ::DirectHTTPMessageResponder/completeHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
Can someone please help me, I really need to figure this out
for my company.

a string value is being read checkLogin() when its expecting
an object with property loginsuccess.
maybe its a typo or something in your code.
for example you may have place:
var.loginsuccess == "loginsuccess";
in which it should be:
var == "loginsuccess";

Tiger 10.4.4 or 5 and Windows Server 2003 Services For Macintosh unstable??

We are running these tested Mac clients here:
macMini 1.5Ghz 10.4.5
G4 Quicksilver 800Mhz 10.4.4
G4 Dual Mirror PowerMac 10.4.4
They mount volumes on these servers:
Dell Windows Server 2000 (SFM)
Dell Windows Server 2003 (SFM)
Xserve G4 OS 10.3.9 Server
Macs sleep settings are this:
Computer sleep=1 hour
Display sleep=1 hour
Hard drive=sleep
Symptom:
When the Mac goes to sleep, the 2 Windows Mac File servers volumes are
disconnected. Upon wake, the error message stating they were disconnected are waiting.
The Xserve volume is untouched. This should not be a problem
since the Windows servers are running Appletalk via IP not
native Appletalk protocol.
Comments:
Might be related to the lookupd bug in Tiger? http://www.macintouch.com/readerreports/macosx1042/topic3108.html
Here’s the system log from the macMini: (13:47 is when I woke it and manually mounted the volumes)
Feb 23 09:37:22 M00XXX /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: ***********************************
Feb 23 13:14:13 M00XXX kernel[0]: AFPSleepWakeHandler: going to sleep
Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
Feb 23 13:14:24 M00XXX configd[32]: AppleTalk shutdown
Feb 23 13:14:25 M00XXX configd[32]: AppleTalk shutdown complete
Feb 23 13:14:28 M00XXX launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[88]: exited abnormally: Hangup
Feb 23 13:14:28 M00XXX configd[32]: posting notification com.apple.system.config.network_change
Feb 23 13:47:06 M00XXX kernel[0]: System Sleep
Feb 23 13:47:06 M00XXX kernel[0]: System Wake
Feb 23 13:47:06 M00XXX kernel[0]: Wake event 0020
Feb 23 13:47:08 M00XXX kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Feb 23 13:47:08 M00XXX kernel[0]: USB caused wake event (OHCI)
Feb 23 13:47:08 M00XXX configd[32]: setting hostname to "M00XXX.local"
Feb 23 13:47:08 M00XXX configd[32]: AppleTalk startup
Feb 23 13:47:10 M00XXX kernel[0]: AFPSleepWakeHandler: waking up
Feb 23 13:47:11 M00XXX configd[32]: AppleTalk startup complete
Feb 23 13:47:12 M00XXX configd[32]: posting notification com.apple.system.config.network_change
Feb 23 13:47:12 M00XXX lookupd[7515]: lookupd (version 369.2) starting - Thu Feb 23 13:47:12 2006
Feb 23 13:47:12 M00XXX configd[32]: setting hostname to "m00xxx.secret.com"
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/VOL1
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received VQ_DEAD event (32)
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL1', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-1.2c000009', dead
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL1, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL2', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-2.2c00000a', dead
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL2, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 found 2 filesystem(s) with problem(s)
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Asura_Queues, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/Asura_Queues', from 'afp_3QgJ7Z2s2fVR2flF2I2ZlbNQ-1.2c00000b', dead
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received unknown event (48)
Feb 23 13:49:54 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/Asura_Queues, pid 7519
Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL1, pid 7520
Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL2, pid 7520

My SMB share get disconnected while my Powerbook was still running.
Errors in system.log:
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 received VQ_DEAD event (32)
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 type 'smbfs', mounted on '/Volumes/backup', from '//HALO;CYONG@PEANUTS/BACKUP', dead
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 found 1 filesystem(s) with problem(s)
Anyone else having the same problem?

Crystal Reports 9 and Windows Server 2003 sp1/sp2

Post Author: jnribeyrol
CA Forum: General
Hello,
due to security updates in my company, we have to upgrade from Windows Server 2003 to sp1 or sp2.
I haven't been able in the support to find out if there was any problem with Report Access Server on these SPs.
Can somebody help me.
regards

CR XI is past it's end of life. You can upgrade to CR XI R2 for free.
Go to: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Typically this is due to DEP, search forums for more info on how to configure it as well as your Anti-virus and/or Firewall may be stopping CR from running. You also need full Admin rights to install all components.
Thank you
Don

Essbase 9.3.1 and Windows Server 2003 SP2

Similar Messages

Maybe you are looking for