Essbase Analytics for HFM-HFM application connection cannot be established.

Hi,
I have created a Bridge for Analytics & in the summary HFM Server/Application status is displayed as 'Not Available'.
I have given correct details/credentials for HFM server.
Can anyone tell that what can be possible reasons for the same?

Hi HP,
The Essbase Analytics Link and HFM needs to be registered with the same Shared Services. Hope you are doing the same.
Thanks & Regards
Sandy

Similar Messages

Essbase Analytics for HFM- Data Update Agent Status

Hi,
In Essbase Analytics for HFM, Data Update Agent status is showing 'Not Active', so as 'Analytic Link Data' status.
The Start/Stop option for the same is disabled. Other connectivity statuses in Bridge are all 'Available'.
What needs to be done to make Data Update status 'Active'.

Hi HP,
The Essbase Analytics Link and HFM needs to be registered with the same Shared Services. Hope you are doing the same.
Thanks & Regards
Sandy

Essbase Analytics for HFM

Hi,
I have installed Essbase analyitcs. But when I try to add new Analytic server it throws connection fail error.
Can someone specify what is Hostname?(is it HFM server I want use as a source or analytic server?) What Username/Password should be given?( Essbase credentials?)

I provided the essbase server details. Following are the details-
Host name- BIDS42S1586
URL- http://BIDS42S1586:5423/hyperroll_livelink/
& provided Admin credentials.
I am getting the error- "Cant connect (Unknown Exception):(0)null"

"Back to My Mac is turned on, your VPN connection cannot be established"?

Hi,
I searched for this recurring notice that I am getting " Because Back to My Mac is turned on, your VPN connection cannot be established", and came up with this thread: http://discussions.info.apple.com/message.jspa?messageID=8436720
However, I am not trying to establish a VPN when I get this message (and don't have one AFAIK).
Any idea what might be causing this message? I can't seem to figure out what triggers it, it just seems to pop up every hour or so. iChat is the only thing I have been using recently that seems to
Is there any way to discover what VPNs my laptop has set up? I don't have any additional software that is specific to VPNs, so it would have to be something already built into the OS. Does the Transmission application create a VPN? That is the only thing I can think of.
Any other ideas on what might be causing this message?
Your help is appreciated!
A.

If you have a VPN installed (by mistake?) you should be able to go to your System Prefs > Network and see the VPN listed in the left hand column along with Aiport and Ethernet. You can un-install by using the minus button at the bottom of the column.
The link provided shows you how to install a VPN client with screen shots, including one of this Network Prefs screen and what a VPN client looks like.
https://www.publicvpn.com/support/MacOSX105.php

I'm trying to update iphone 4s to 5.1 but when plugged into Itunes it says network connection cannot be established and error downloading 5.1

I'm having trouble updating software for my iphone 4s from 5.0.1 to 5.1 but each time i plug into itunes to download it says network connection cannot be established and the phone just says an error has occured. What can i do?

If you don't have iOS 5, plug your iPhone into your computer, select it in iTunes, and in the Summary, click Check for Update.
If you do have iOS 5, it has onboard updates so you don't have to plug it in, just go to Settings, click General, click Software Update and you will be presented with iOS 5.1 which came out a few hours ago. Both my iPhone 3GS and iPad are already updated to iOS 5.1 now.

AnyConnect 3.1.01065 error - Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established.

I've got a user running:
AnyConnect 3.1.01065
on
Windows 7 64bit.
Several weeks ago she started encountering the following error:
-after logging into Windows and launching the AnyConnect client, she enters her username and password and successfully authenticates.
-the connection is not established and she's presented with the following message: "Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established."
After doing some troubleshooting, inlcuding uninstalling/reinstalling the anyconnect client, it seems the culprit is the following file:
C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\<filename>.xml. When the problem occurs (which is not regularly, sometimes it occurs daily, sometimes just once a week) examining that file indicates it has no security or permissions set. Quitting the AnyConnect software, modifying the file so that the user has full control of it, then relaunching AnyConnect fixes the problem (until it happens again). Uninstalling, and making sure to move C:\ProgramData\Cisco to the trash, then reinstalling did not seem to help.
The closest match in these forums is the following thread, https://supportforums.cisco.com/message/3760446 - though no clear resolution was given.
Has anyone else encountered this, and been able to fix it?
Thanks much.

Just FYI, it seems at least in this case, purging all the previous system restore points seems to have resolved this issue...

Unable to Kill the Consolidation task for HFM application

User is unable to kill the Consolidation task in HFM application. Consolidation process which usually takes 2 mins has been showing status as running @79% since 4-6 hrs. User ID is has the provisioning manager, lock Data and unlock data provisions in Shared Services. The stop task button in the Running Tasks list is not enabled . Our Support team has advanced user access which is not also able to stop the task. Please note Admin access is restricted and not allowed for such tasks.

I would check the HFM Log to see if you find anything referring to locked / blocked records.
If your HFM app is killed in the middle of consolidating or performing other activities that requires it to 'lock' a segment of memory in the database, that 'lock' is still held on those data points when the application restarts.
If you then try to perform another consolidation and it hits one of those locked data points, it will sit there for a very long amount of time waiting for the 'lock' to clear.
I forget the exact error message that you will find in the log AND I forget the timeout period; however, it sucks having to wait through that.
The other possibility that comes to mind is that the consolidation really aborted and the status didn't update. (once again check the logs)
Charles

Communication error for HFM Application

Hi all,
We seem to be able to log on to an application via HFM Client, but not workspace. We have checked the log file there is no error, It has been fixed by restarting the services. But again we are facing the same issue, Is there are solution to fix this issue permanently.
Thanks in Advance,
sanjeev
Edited by: us**** on Oct 21, 2010 10:10 PM

am connected via AirPort to a Netgear WGT624 v.2 802/11g wireless router that is connected to a Road Runner cable modem.
Which of these devices is doing DHCP ?
I hope the modem is in Bridge Mode and the Airport is Wireless Access Mode and NOT Sharing an IP.
That should leave the Netgear to do UPnP.
Following that have you disabled the SPI or DOS firewall in the WAN Settings and Let it Respond to Internet Pings ?
10:46 PM Sunday; March 30, 2008

TS1363 iphone connectivity cannot be established. Iphone not recognized

When I plug in my iphone to the computer, I get a message that says it is not recognized

Update: Ok, I have been playing around with this for quite some time now and have come to a few conclusions.
First, it appears that this is being caused (at least for me) by corrupt files in my iTunes library. My iPod (30 GB, 5G) syncs with my complete library but my iPhone only syncs with 1 playlist. So I completely wiped all music from my iPhone and started to re-sync one album at a time (extremely time-consuming). I got through the letters 'A' and 'B' ok but when I got to the 'C's, boom, error message.
At this point, I opened the playlist in iTunes and deleted the last album I dragged into it. Then I disconnected my iPhone, re-connected it and did another sync, thereby deleting that last album off the iPhone. Then I added the next album and re-synced again and everything went smoothly. So now I am up to the letter 'G' but this process is painstakingly slow.
Now obviously it was most likely only one song in each of these "bad" albums that was corrupt but I didn't want to go song-by-song just yet.
Based on the fact that I used CopyTrans to rescue my library off my iPod after a hard drive crash, my first assumption is that this process somehow corrupted several files while loading them back into my newly installed version of iTunes. The only thing I can't figure out is, if this is actually the case, why have I not had the same problem syncing my iPod. It has been syncing perfectly, both before and after the hard drive crash/recovery?
What I need to find is a way to identify ALL of the corrupt files (if this is in fact what is causing the problem) quicker than copying to the playlist then syncing to the iPhone. Does anyone know of any software out there that can be used for this purpose? It doesn't have to be free either as, like CopyTrans, I don't mind paying for something that works. Of course, the jury is still out on that one.!

Network Connection Cannot Be Established

Unable to updated to iOs 5.1 on iPad, iPod or iPhone - get error message on iTunes as noted above and if trying to update over WiFi, message states "Unable to Check for Update - An error occurred while checking for a software update.' or it acts as if it has found and trying to download and it times out as well.
HELP!!!

First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
Also the update servers have been very busy and this may alSo be causing your problem. Keep trying.

Extended Analytics for star schema creation from HFM application

Hi,
I'm trying to create star schema via extended analytics from HFM application but facing below error
3/21/2013 12:30:07 PM : Status : Extracting Metadata
Schema did not previously exist.
Metadata update has failed. : (-2147217900) (One or more errors occurred during processing of command.)
Processing status change: (-2147217900)
Data processing failed. : (-2147217900) (One or more errors occurred during processing of command.)
3/21/2013 12:30:10 PM : Status : Processing completed with errors
Extended Analytics export completed with errors for Application GCS using Label GCS CON.
What could be the possible reason for it?
Also can someone please provide any suitable references or links to learn this EA for star schema creation.
Thanks,
Ravi Agrawal

The error you pasted here is incomplete. Look in the system messages and you will find more complete information that will lead you to the error's cause. Very often this is an error in the database, though sometimes it is caused by a metadata member with an invalid character. To determine whether it is data or metadata that causes the error, you could generate a schema with metadata only and see if the error appears.
-- Chris

Issue in creating Database Connection to HFM Application through workspace

Hi,
This is a fresh installation. We are trying to create a new database connection in workspace for HFM Application.
When i click on the Application selection icon, it gives me the below error message,
*"Error connecting to database connection nasbyphyp03: Error: Error getting CSS support information for driver* HsvAdmDriver*".*
I tried re-installing the HsvAdmDriver, but still the problem persists. (nasbyphyp03 is the server name)
But, i am able to access HFM Application from workspace and smartview.
Please advice.
Thanks,
Siva

Can anyone suggest me the solution ???
We are struck with this and unable to process any Reports
Thanks,
Siva

Tool to backup HFM Application for version 11?

Like the tool in HFM 9, "HFMApplicationBackup.exe" are there any tool for HFM Application version 11? Or else is there a new way to do that? please help me!!
Thanks!

Most of the information for HFM is held in the relational database so backing up the database is criticial, It might be worth having a read of the following DOC in Oracle support - How to Backup HFM Application for Disaster Recovery [ID 854951.1]
Cheers
John
http://john-goodwin.blogspot.com/

Has Anyone Been Able to Stand Up Essbase Analytics Link (EAL) for Financial Management in version 11.1.2.2?

Has anyone had any luck standing up the Essbase Analytics Link (EAL) for Financial Management Application in 11.1.2.2? We are to the point where when we click on the “Create Bridge Application” it creates an application and database in EAS and then crashes the Hyperion Essbase Analytics Link Server - Web Application . Prior to this we were getting a NetRetry and NetDelay error and have increased those settings are are not receiving those same errors. I’m curious if 11.1.2.2 is even a functioning version of EAL or if we are out of luck until the next version. Any feedback is appreciated.

FYI, we were able to get EAL up and running after adding the following entries into the registry on our servers...
Solution
This timeout issue can be fixed by adding two tcpip registry parameters, but first you must identify which client was communicating with essbase when the timeout occurred so that you know which machine to add the parameters to. If all the EAL and EPM components are installed on a single machine, then that machine would also host the client. If products are installed in a distributed environment you determine the client machine based on how the EAL Essbase Server component is defined.
The APS URL is part of the Analytics Link, Essbase Server definition in EAL.
If the value (APS URL) is "Embedded" this means that the EAL Application Server is communicating via the JAPI directly with the Essbase Server. In this case the EAL AppServer is the client to the Essbase Server. For this case the following tcpip registry parameters need to go on the machine where the EAL Application Server is running.
If the (APS URL) value is http://serverName:13080/aps/JAPI then the EAL Application Server is communicating by way of Hyperion Provider Services (APS). In this case EAL proxies requests to and from the Essbase Server through APS. This means that APS is the client to the Essbase Server and the tcpip registry parameters need to go on the machine where Hyperion Provider Services are running.
Once you have identified which machine is acting as the client to essbase, set the TcpTimedWaitDelay=30 and MaxUserPort=65534 parameters via the windows registry.
1. Open the Windows Registry.
2. Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TCPIP\Parameters.
3. Add new DWORD Value named "TcpTimedWaitDelay"
- right click and select Modify
- Select "decimal" radio button, type in 30.
4. Add new DWORD Value named MaxUserPort
- right click and select Modify
- Select "decimal" radio button, type in 65534
5. A reboot of the server is necessary.

Connection pool for big web application

hi,
i am developing an application which had more then 20 classes and each class use databases.
i made an connection bean and use it for database connectivity but as my code expand and my application run for longer time i start getting error of connection limit.
then i start using connection pool. in this i start using one connection for whole application.
now i want that my
1-whole application use that connection pool and i dont need to initialize it in different classes.
2- The main problem is that may at a time i have to connect database with different user and these connections should remain active.
my application will be used for enterprise level and remain active for months .
following is my connection pool
public class ConnectionPool implements Runnable
      private Log log=new Log();
      private String driver, url, username, password;
      private int maxConnections;
      private boolean waitIfBusy;
      private Vector availableConnections, busyConnections;
      private boolean connectionPending = false;
      public ConnectionPool(String driver, String url,String username, String password,int initialConnections, int maxConnections, boolean waitIfBusy)
          this.driver         =     driver;
          this.url            =     url;
          this.username       =     username;
          this.password       =     password;
          this.maxConnections =     maxConnections;
          this.waitIfBusy     =     waitIfBusy;
          if (initialConnections > maxConnections)
            initialConnections = maxConnections;
          availableConnections = new Vector(initialConnections);
          busyConnections = new Vector();
          try
              for(int i=0; i<initialConnections; i++)
                availableConnections.addElement(makeNewConnection());
          catch(Exception e)
            log.write(e.getMessage());
      }//EO constructor
public synchronized Connection getConnection()
         if (!availableConnections.isEmpty())
              log.write("Total connections="+availableConnections.size());
              Connection existingConnection = (Connection)availableConnections.lastElement();
              int lastIndex = availableConnections.size() - 1;
              availableConnections.removeElementAt(lastIndex);
              // If connection on available list is closed (e.g.,it timed out), then remove it from available list
              // and repeat the process of obtaining a connection. Also wake up threads that were waiting for a connection because maxConnection limit was reached.
                    try
                        if (existingConnection.isClosed())
                          notifyAll(); // Freed up a spot for anybody waiting
                          return(getConnection());
                        else
                          log.write( "in available connection" );
                          busyConnections.addElement(existingConnection);
                          return(existingConnection);
                    catch(SQLException se)
                        log.write(se.getMessage());
          } else {
                    // Three possible cases:
                    // 1) You haven't reached maxConnections limit. So establish one in the background if there isn't
                    //    already one pending, then wait for the next available connection (whether or not it was the newly established one).
                    // 2) You reached maxConnections limit and waitIfBusy flag is false. Throw SQLException in such a case.
                    // 3) You reached maxConnections limit and waitIfBusy flag is true. Then do the same thing as in second
                    //    part of step 1: wait for next available connection.
                    if ((totalConnections() < maxConnections) && !connectionPending)
                      makeBackgroundConnection();
                    else if (!waitIfBusy)
                        log.write("Connection limit reached");
                    // Wait for either a new connection to be established (if you called makeBackgroundConnection) or for
                    // an existing connection to be freed up.
                    try {
                      wait();
                    catch(InterruptedException ie)
                      log.write(ie.getMessage());
              // Someone freed up a connection, so try again.
            return(getConnection());
          }//EO main if-else
      return null;
}//EO getconnection method
// You can't just make a new connection in the foreground
// when none are available, since this can take several
// seconds with a slow network connection. Instead,
// start a thread that establishes a new connection,
// then wait. You get woken up either when the new connection
// is established or if someone finishes with an existing
// connection.
private void makeBackgroundConnection() {
    connectionPending = true;
    try {
      Thread connectThread = new Thread(this);
      connectThread.start();
    } catch(OutOfMemoryError oome) {
      // Give up on new connection
      log.write(oome.getMessage());
public void run() {
    try {
      Connection connection = makeNewConnection();
      synchronized(this) {
        availableConnections.addElement(connection);
        connectionPending = false;
        notifyAll();
    } catch(Exception e) { // SQLException or OutOfMemory
      // Give up on new connection and wait for existing one free up.
      log.write(e.getMessage());
// This explicitly makes a new connection. Called in
// the foreground when initializing the ConnectionPool,
// and called in the background when running.
private Connection makeNewConnection()
    //log.write("make new connection with "+url+" "+username+" "+password +" and driver= "+driver);
    Connection connection=null;
      try
        // Load database driver if not already loaded
        //Class.forName(driver);
         DriverManager.registerDriver(new OracleDriver());
        // Establish network connection to database
        connection = DriverManager.getConnection(url, username, password);
                if( connection.isClosed() )
                  log.write("ooooooops no connection");
                else
                  log.write("yahoooo get connection");
      catch(Exception e)
        log.write(e.getMessage());
    return(connection);
public synchronized void free(Connection connection) {
    busyConnections.removeElement(connection);
    availableConnections.addElement(connection);
    // Wake up threads that are waiting for a connection
    notifyAll();
public synchronized int totalConnections() {
    return(availableConnections.size() + busyConnections.size());
/** Close all the connections. Use with caution:
   * be sure no connections are in use before
   * calling. Note that you are not <I>required</I> to
   * call this when done with a ConnectionPool, since
   * connections are guaranteed to be closed when
   * garbage collected. But this method gives more control
   * regarding when the connections are closed.
public synchronized void closeAllConnections() {
    closeConnections(availableConnections);
    availableConnections = new Vector();
    closeConnections(busyConnections);
    busyConnections = new Vector();
private void closeConnections(Vector connections) {
    try {
      for(int i=0; i<connections.size(); i++) {
        Connection connection =
          (Connection)connections.elementAt(i);
        if (!connection.isClosed()) {
          connection.close();
    } catch(SQLException sqle) {
      // Ignore errors; garbage collect anyhow
      log.write(sqle.getMessage());
}i get this code from internet, in which it also mention that use following code
public class BookPool extends ConnectionPool {
private static BookPool pool = null;
private BookPool(...) {
super(...); // Call parent constructor
public static synchronized BookPool getInstance() {
if (pool == null) {
pool = new BookPool(...);
return(pool);
}if some one want to use it for whole application then use connection pool by BookPool,
now main point is i m not getting the BookPool class could some one explain it to me???
and second by using it can i connect to different users of DB at a time, if cant then how i can.
its good if some one explain it by little code.
thxxxxxxxxxxxxxxxxxx

If this is a real, serious application and not just for practice, then why are you trying to write your own connection pool implementation?
You'd better use Jakarta's Commons Pool and Commons DBCP, which are widely used, well tested implementations of connection pools.
If this is a web application running in a J2EE container, you'd normally configure the connection pool in the container. The container will register the pool in JNDI and you'd look it up in JNDI from your application.
Here's some documentation on how to do that in Tomcat 5.5: JNDI Datasource HOW-TO

Essbase Analytics for HFM-HFM application connection cannot be established.

Similar Messages

Maybe you are looking for