Essbase and Windows persistence storage

Has anyone faced issue wherein changes in essbase cause Windows to create too many restore points? Our cube is on a SAN drive (and Windows 2008), and it seems to be mis reporting disk size every now and then. On checking with Windows operations, they found many restore points being created, each one of them taking good amount of space. They say while this behavior is controlled via the windows setting, there is some part being played by Essbase too.

Are you definitely sure Essbase is creating the restore points, do you have evidence to suggest this? If you do then it should be logged with Oracle.
Cheers
John

Similar Messages

VMware and Windows Server Storage Space

We know Windows Storage Server could be storage of VMware.
Could VMware also adopt Storage Space feature when using Windows Storage Server?

Hi,
I'm a little unclear about the question.
Do you mean you are going to install a VM in VMware as Windows Storage Server and setup Storage Space on it?
I cannot confirm if there is any specific limitation of VMware but personally I think it will work. In Hyper-V it is supported.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Intel Matrix Storage Manager disables Windows Update and Windows Validation on Windows 7 64-bit

I have a Lenovo ThinkPad R61 8918CTO on which I did a clean install of Windows 7 Ultimate SP1 (64-bit) on a new Seagate Momentus XT 750GB drive. The installation was trouble-free, as were all of the post-install Windows Updates.
Then I installed ThinkVantage System Update 4.03 and used it to install most of the available Lenovo updates. Big mistake. I'll spare you a detailed account of the hours I wasted troubleshooting, rolling back to previous restore points, and doing more troubleshooting, but it turns out that installing Intel Matrix Storage Manager driver v. 8.9.2.1002 caused Windows Update and Windows Validation to fail.
Symptoms: Windows Update control panel can't check for updates and reports that the Windows Update service isn't running when it actually is. Online Windows Validation fails and the standalone Windows Validation utility won't install. Microsoft programs that require a validated copy of Windows (e.g., Microsoft Security Essentials) won't install.
Solution: Roll back the driver for the relevant SATA controller to the previous driver.
I've reinstalled ThinkVantage System Update 4.03 and hidden the proposed Intel Matrix Storage Manager update; since then, I've used it to complete my Lenovo updates without issue.
I hope this post will help other people with this problem find the solution a lot faster than it took me!

This happened after installing a new advanced format drive with 4k-byte sectors, I'd guess. If the storage driver doesn't report the physical sector size to Windows, update fails.
I just ran across this myself (again) putting Win 7 on a T400.
I don't know why this is still going on. It may be that the update lists for older machines still have pre-AF-drive drivers listed.
FYI, another fix is going to the Intel site and installing the latest Matrix Storage Manager AHCI driver. This may be more desirable than rolling back to an older driver in some cases.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Windows Server Essentials Storage Service and Windows Server Essentials Email Service eating memory

Hi
I have Windows Server 2012 R2 with Essentials Role installed. I have integrated server with Azure AD, Office 365 and Intune using the Essentials Dashboard integration tools.
I can see that Windows Server Essentials Storage Service and Windows Server Essentials Email Service are eating much of server memory. What are these services for and why they use a lot of memory? Specially I am wondering about the Email Service. What is
it for? Server dont handle email in any way so what is this service for? I tried to google it but found nothing.

Hi
I have 6GB of memory.
When I check from Resource Monitor, for Essentials Storage Service, Commit Set is 4G and Working Set is 1,8G.
Email Service Commit is about 1,8G and Working Set is just below 1G.
So these two services are reserving almost all the memory.
Memory is about 85-90% in use all the time, whether it be night or day.
Server have about 12 users and at the office there is about 2-6 person at the time. Link between server and office is 100M. There are no other services installed but the basic ones. We use server for AD (O365 integration) and file shares. Traffic in File
Shares are not big. They are more kind of an warehouse that in busy day-to-day use.
This server is about couple of months old and it has been like this since it was fired up.
I dont know what to look for from Event Logs and Process Monitor dont give me anything useful.

Windows 2012 storage server and tier with external SSD disks

Hi
My query is in case I have one SAN storage with SSD and FC disks connected to Windows 2012 storage server, will Windows be able to manage Tier between two types of disks if the volumes are properly assigned and formated?
Regards

Hi
My query is in case I have one SAN storage with SSD and FC disks connected to Windows 2012 storage server, will Windows be able to manage Tier between two types of disks if the volumes are properly assigned and formated?
Regards
Short answer: No, not automatically. Long answer: Yes, it can be done but with some tricks. First you'll have to make your SAN export LUs built from flash and from spindles. At least one of each (see URL below). Then you'll have to build storage spaces (even
clustered but that's not officially supported for non-SAS disks) from them.
See:
Configure Tiering with Windows Server 2012 R2
http://blogs.technet.com/b/askpfeplat/archive/2013/10/21/storage-spaces-how-to-configure-storage-tiers-with-windows-server-2012-r2.aspx
Both LUs would have non-SSD type reported so you'll have manually assign types with PowerShell what's flash and what's spindle.
"Notice that the SSD devices were detected as SSD media. However, in this case the physical drives show as unknown.
If yours are not detected like in this example, they should be set correctly which can be done using PowerShell. "
Hope this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Mac OS X and Windows Storage Server share

I have a new Windows 2003 Storage Server and several MacBook Pros. I created a share on the root of a drive on the Windows server. I get the following error when trying to copy a file to the share: "The operation cannot be completed because you do not have sufficient privileges for some of the items".
If I create a folder on that drive and create a share with the same permissions, the file copies with no errors. Also, the only way it works is if I give permissions to "Everyone".
I'd like to lock the permissions down to a group. Any ideas? Thanks!

Adawgalicious -
Welcome to the world of Mac/Windows integration. I too get rather frustrated when trying to get the two systems to work together (I have thought of having my systems watch the Apple ads - in hopes that they may remember that they supposedly work together).
Seriously - I have my iMac as well as an Ubuntu server talking to my Windows 2003 Server and Domain. A few questions:
- Are you joining the Domain with Macs?
- What version of Leopard are you using? 10.5.5 and .6 seem to misbehave at times.
To work around my problems I joined the Mac to my Domain using the Directory Utility. Once I did this I was able to connect to any of the shares within the Domain. I am able to create folders on the Windows share using my iMac and access them on my Windows systems (you will need to have a Domain account to connect tot he shares).
Best of luck -

Essbase system 9 -difference between the installation in UNIX and windows

Hi,
plz let me know the difference in installation in UNIX and windows, let me know the process. this is bit ugent...
advanced thanks for your help and support.
Thanks,
sudhakar

Hi Sudhakar,
You have 2 documents for windows_installation and unix_installatio in the following location.
http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_1.htm
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

Mini DV Video - Storage for Mac and Windows

I have about 16 hours of miniDv video that I have imported through iMovie and is now saved on an External HD connected to my Time Capsule. I have a Windows machine wirelessly connected and I would like to be able to access these files. I do not seem to be able to open the saved files. Any thoughts on either how I could make this content readable by both Mac and Windows?

To read it in iMovie on Mac, your drive must be formatted as Mac OS Etended (journaled).
For Windows, you drive can be formatted FAT32 (readable and writable by Mac (but not by iMovie)) or
you can format as NTFS, which is read only by Mac.
Your best bet is to format a different drive as FAT32 and copy these files to it.

Windows 7 and Windows 8 in the same computer

I have HP Pavilion HDX9300 with two hard discs. I have installed Windows 7 in och of them and Windows 8 in the other. Both W7 and W8 works when the disc is placed in one of the discplaces but not in the other.
If I want to change from W7 to W8 I thus have to change place for the hard disc. My desire is to change from W7 to W8 without changing places for the harddiscs. Is it possible? If so, how do I do?

I believe the second hard drive bay in the HDX9300 is not bootable. You need to load Windows 8 on the same hard drive as Windows 7 as a dual boot.
http://www.extremetech.com/computing/143380-how-to-dual-boot-windows-8-and-windows-7
You could then use the second drive as storage accessible to both operating systems.

What type of hard disk should I use if I want to use it on mac and windows?

Hey Forum,
I am using windows xp on my macbook (snow leopard). I came across some dealers who say that there are hard disks for mac only and for both mac and windows. So, I wanted to buy a hard disk so that I can use it both on mac and windows xp, so what type of hard disk should I use? Must I partition into 2?
or are there any harddisk in the market which is compatible for both mac and windows xp without screwing up the format(NTFS/Mac OS X Journaled)? Pls look into this matter and help me with it.
All of your replies and suggestions is much appreciated.
Thank you.
Ala.

Run, don't walk, from that dealer! and never look back
Once in a very long while Apple will have customized firmware on drives, and it is possible to find SCSI/SAS or drives that are destined to be used with high end storage controllers.
But that is the exception that makes the rule.
SATA is SATA. Though.... there are now SATA III drives that don't work in XP, or that need a jumper, and Seagate and some drives have managed to deliver firmware that has caused trouble... and Apple has had to issue firmware updates to help compatibility....

WIP: My adventures with 2011 MacBook Pro and Windows 8.1 including seconday HDD

So I've just lost about 3 days of my life trying to install Windows 8.1 (my preferred) operating system on a Late 2011 MacBook Pro.
I feel that I've learnt a lot and hopefully can share my experiences to speed a few of you along the process. This is my own experience please let me know if anything I have documented is not true and I will revise for completeness
What my initial goal was to have a dual HD set up with an SSD running both Mac OSX and Windows 8.1 (via Bootcamp) with a 2ndry HD in places of the optical (DVD) drive for shared storage.
I have tried all/some of the following:
Win 8.1 ISO from the MS site: http://windows.microsoft.com/en-GB/windows-8/create-reset-refresh-media
USB created using Rufus for Bios and EFI boot
DVD created using Windows 8.1 (can't remember how)
Yosemite USB created using: Create a bootable installer for OS X Mavericks or Yosemite - Apple Support
There are 2 main options when installing Windows:
Bios
EFI
Both have different pros and cons, which Im going to try and document here:
Bios
Full driver support via Bootcamp download
Slower (mainly boot time, not by much though)
Not quite as "native" as some may prefer
Limited number of partitions??
EFI
Fast
Native
Does not support video driver properly (no dual screen)
Audio does not work (says Failed to start device)
Here are some random facts I know
Windows DVD will only boot from optical drive when connected internally. If plugged in via external USB it stops at black screen with flashing cursor and doesnt progress
Using 5HT-2a's method on Redit (see below) and the EFI install, I get the Cx0000005 cannot find source media error and cannot install
Hacking the Bootcamp tool to create a Windows 8 ISO with all the drivers works (see link below) but when using it in EFI it crashes repeatedly during install so you never can complete the process (I think this is due to the video drivers) and therefore can't run Bootcamp assistant thus get proper trackpad support
Using lion10's method (below) for tweaking a standard Mac partitioned HD I was able to get past the cannot install Windows error ("windows cannot be installed to this disk. the selected disk is of the GPT partition style") and install Windows using EFI
Best guides/links I have found:
lion10's method:The ultimate way to install Windows 8.x in (U)EFI mode on Apple systems
5HT-2a's method: http://www.reddit.com/r/mac/comments/2fy3be/by_popular_demand_my_better_than_boo tcamp_guide/
skipsizemore's method: Can't install Windows 8 x64 on late 2013 MBP with1TB SSD
Bootcamp drivers 2 versions depending on Mac:
Older Macs: Boot Camp Support Software 5.1.5621
Newer Macs (most 2013+): Boot Camp Support Software 5.1.5640
Bootcamp Assistant Hack for USB creation on older Macs: http://forums.macrumors.com/showthread.php?t=1680652There is an additional parameter required if you are using Yosemite during code signing (-deep I think, but cant remember)

What I ended up doing (so far)
I'm not 100% sure of the state of my disk when I got to where I ended up but I had previous completed the GDisk and DISKPART methods from 5HT-2a and lion10's methods. I was using a 128gb SSD
I then decided to start from the top (as I had previous installed Win 8.1 on the original HD using DVD)
So I ran the Yosemite installer (via USB) and used the partition tab in Disk Utility to repartition the disk into 2 partitions, 1 for OSX and 1 (ExFat/NTFS) for Windows
I then booted in Bios (Windows, not EFI) using the Windows 8.1 DVD using the DVD plugged in internally (wouldnt work using USB enclosure)
Installed Windows to the partition I created (probably the 4th one)
After Windows installed, ran the Bootcamp set up program
Reran Yosemite installer and installed Yosemite
Swapped out the optical drive for a larger HD (7200rpm) and formatted it with HFS+

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

External Hard drives Mac OS and Windows

I have a question on external hard drives. I am looking for an external drive that will work with both my Mac and Windows xp pro. I remember that Mac used to be able to read windows format but not vise versa. I know that thumb drives switch back and forth with no problem but it seems that hard drives do not. I went to the store and was told and the boxes state that the windows drives must be reformatted to work with Mac and the WD Mac drive said that it must be reformatted to work in Windows, (as I expected). Is this something new between the OS's or something to do with the drive sizes? Any help would be appreciated as I would like to be able to move large files, usually movies, between the two formats by simply moving the external drive from one to the other.
Thank you

If you reformat that flash drive to use +Mac OS X Extended (Journaled)+, it will probably work. But then, you would not be able to use it on the Windows PC (until you reformatted it again).
then probably the best option although more expensive will be to buy an ethernet drive and connect to my router.
Or maybe you can do a direct transfer from PC to Mac or Mac to PC over wired Ethernet, and put the extra storage drive on the Mac or PC, formatted to be optimal for the respective connected OS. If your PC has gigabit Ethernet (and your router is has gigabit ports), it should be fairly fast. Make sure the cables are rated Cat-5e or better.
Wow another Power Mac 8100 user who added a G3 card to it.
Still a machine that is set up and runs fine, for using my old Mac OS 9 programs. I bought mine used after it was already a few years old, but it was used as my primary Mac longer than any other machine before or since. It stayed relevant for a long long time.

Can't install windows azure storage sdk on windows phone 8

From Visual studio 2013 ultimate, I opened Nuget package manager console and typed following command for my windows phone 8 solution:
install-package windowsazure.storage
And I got the following error:
install-package : Could not install package 'Microsoft.WindowsAzure.ConfigurationManager 1.8.0.0'. You are trying to install this package into a project that targets 'WindowsPhone,Version=v8.0', but the package does not contain any assembly references or
content files that
are compatible with that framework. For more information, contact the package author.
At line:1 char:1
I get the same problem using UI version of package manager as well.
Did something change with the newer version of windows azure storage?

The package you are trying to install does not include the Windows Phone library. Please use the following command instead:
Install-Package WindowsAzure.Storage-Preview -Pre
Thanks for this. It worked for me. Can I just add, for those that don't know how to run this command. You go to tools > Library package manager > package manager console then paste in the command and hit enter.
Thanks again!

Cannot install Windows Azure Storage Emulator - 3.0 Error: No available SQL Instance was found

When trying to install Windows Azure SDK for .NET (VS 2013) - 2.3 from Web Platform Installer 4.6, the install fails because Windows Azure Storage Emulator - 3.0 (Dependency) does not install successfully.
Possibly relevant lines from the install log are:
CAQuietExec: Entering CAQuietExec in C:\WINDOWS\Installer\MSI1223.tmp, version 3.6.3303.0
CAQuietExec: "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\Storage Emulator\WAStorageEmulator.exe" init -forcecreate -autodetect
CAQuietExec: Windows Azure Storage Emulator 3.0.0.0 command line tool
CAQuietExec: Error: No available SQL Instance was found.
CAQuietExec: Error 0xfffffff6: Command line returned an error.
CAQuietExec: Error 0xfffffff6: CAQuietExec Failed
CustomAction RunInitialize returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 11:50:13: InstallFinalize. Return value 3.
Action ended 11:50:13: INSTALL. Return value 3.
In terms of SQL Instance, SQL LocalDB is installed and working properly. SQL Server 2012 is also installed and working properly.

Hi,
It is a SDK version issue. I suggest you could remove all azure sdk form your PC and use WPI to install the latest version again.
If you have any questions, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Essbase and Windows persistence storage

Similar Messages

Maybe you are looking for