Essbase cannot start up after the DB server IP changed.

Hi,
My essbase is installed in server A and the DB server is in server B. For some reasons, the IP of DB Server (B) changed.
Then the essbase cannot startup. When run the StartUpEssbase.sh, no error shows up.
+[oracle@eucbi03 ~]$ ./StartUpEssbase.sh+
Starting all
Apache Ant version 1.7.0 compiled on December 13 2006
Buildfile: /home/oracle/app/epm/EPMSystem11R1/common/config/11.1.2.0/resources/instance/start.xml
Finish all
Environment:
Cent OS 6
Essbase 11
Any advise will be appreciated. Thanks.
Regards,
Alex

Hi John,
We didn't use the name for DB configuration. We used the IP. So I changed the 2 files.
And very thanks for your information, I resolved the problem by the document you provided. Just as you said, it's no need to update the files.
Here briefs the case and the solution:
Problem:
I used IP to config the DB server when setup the Essbase. But later, the IP of the DB server changed, the Essbase won't startup, either the administration services.
Solution:
1. Run the config tool (EPM_ORACLE_HOME/common/config/version_numberconfigtool.sh) and change the DB server setting (fill the new IP for the db server, and choose 'reuse the database' when prompted)
After this step, the essbase could startup. But administration services couldn't
2. Go to weblogic admin console (http://ip:7001/console). Edit the JDBC data source setting from old DB server to new one
After this step, the administration services could startup now.

Similar Messages

At start up, after the password login, it changes to a different start up and freezes.

I have an HP Pavilion a6712f. When I start it up the screen is black and white. I return on the start Windows in normal mode. Then my password screen comes up. I type in the pass word and it says welcome. Then it says it is setting up a new login. This login, no matter what I try freezes eventually. I ran diagnostics. I found an error code BIOHD-1, but everything is conected properly. I haven't added any hardware recently. The smart short self test fails and the surface scan test fails. I don't think it is the hard drive though. It also tells me I have no previous start up points to recover, which is not possible, I set start up points at least once each week.

Why don't you think it is the hard drive?
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

The system cannot download information from the SQLSERVER server.

Hi All,
After BPC 7.0 SP6 for MS install we get the following when trying to access the "Manage Application Sets" or any other admin console task, when we try to execute the connection wizard:
The system cannot download information from the SQLSERVER server.
There may be a network or security issue.
Error Message:Error code: 500
any ideas?
Br
Steven

Steven,
Could you also make sure that the problem is not on the client side.
Is this a fresh installtion on the client machine? Or was there already an previous version of BPC on this machine?
If this is not a fresh install, you can try to uninstall the software and then deleting all the files in the folder
"program files\BPC". I've seen that sometimes not all the files are automatically deleted.
Then installing the Bpc client agian...
Kind regards,
Sam

Kded crashes on amarok quit in gnome, cannot start jack after

I'm running amarok in gnome and it works fine except that I'm getting the KDE crash handler telling me that kded has cashed just after I quit amarok. And amarok seems to keep holding onto hw:0, so I cannot start jack after. Which prosess could I kill to make jack start?
Thanks

ZestyTang:
If you import the modified folder you'll just end up with duplicates as the ratings and other metadata will be lost. It's starting over from scratch.
alexkess:
Since it works OK in the other account it might be a preference file other than iPhoto's. Try the following:
Trouble Shooting Preferences in Leopard
1 - Create a folder titled "Preferences A" on the Desktop.
2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
3 - Make a duplicate copy of the Preferences A folder on the Desktop as a precautionary backup.
4 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
5 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button as seen here.
6 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.
OT

The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailabl. If this problem persists, contact your network administrator.

Hi,
When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
"The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
If this problem persists, contact your network administrator."
It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
But it is working in Firefox.
Please help me on how to fix this issue.
Thanks.

Hi Htet,
Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
Thanks
Daniel Yang
TechNet Community Support

Messaging Server 3.6 fails to start even though the Administration Server says "Success"

Messaging Server 3.6 fails to start even though the Administration Server says
"Success". There are no entries in the log to help explain what has happened.

Any failure to start Messaging Server via Administration should be analyzed by
starting the server with /etc/NscpMail.

# /etc/NscpMail start
19991219004527:Dispatch:Notification:Network Module (IMAP4-Server) Failed the verify environment test.
Module not Loaded.
Startup Problem:
Problem Gaining Unique Lock
Netscape Messaging Server Exiting!

This error is caused by an inability to create the .netscape.mailID file
inside the top level of the postoffice.

# cd /var/spool/postoffice
# ls -la
total 30
dr-x------ 8 nobody nobody 512 Dec 19 01:06 .
drwxrwxr-x 13 root bin 512 Feb 12 1999 ..
drwx------ 2 nobody nobody 1536 Dec 19 01:04 config
drwx------ 2 nobody nobody 512 Dec 19 01:04 control
drwx------ 3 nobody nobody 512 Dec 19 01:04 deferred
drwx------ 2 nobody nobody 512 Dec 19 01:04 hold
drwx------ 2 nobody nobody 5120 Dec 19 01:04 log
drwx------ 2 nobody nobody 512 Dec 19 01:04 messages
-rw-r--r-- 1 root other 183 Apr 12 1999 sie.conf
-rw-r--r-- 1 root other 6 Dec 19 01:04 socket.dat

NOTE: The "." entry is the same as ls -l /var/spool/postoffice

# chmod u+w .
# /etc/NscpMail start
# ls -la
total 32
drwx------ 8 nobody nobody 512 Dec 19 01:04 .
drwxrwxr-x 13 root bin 512 Feb 12 1999 ..
-rw------- 1 nobody nobody 5 Dec 19 01:04 .netscape.mailID
drwx------ 2 nobody nobody 1536 Dec 19 01:04 config
drwx------ 2 nobody nobody 512 Dec 19 01:04 control
drwx------ 3 nobody nobody 512 Dec 19 01:04 deferred
drwx------ 2 nobody nobody 512 Dec 19 01:04 hold
drwx------ 2 nobody nobody 5120 Dec 19 01:04 log
drwx------ 2 nobody nobody 512 Dec 19 01:04 messages
-rw-r--r-- 1 root other 183 Apr 12 1999 sie.conf
-rw-r--r-- 1 root other 6 Dec 19 01:04 socket.dat

Hi,
Please check if you have disabled the autodisconnect feature of the Server service. On Windows servers it can be configured through the Autodisconnect registry key.
\HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\
CIFS and SMB Timeouts in Windows
http://blogs.msdn.com/b/openspecification/archive/2013/03/19/cifs-and-smb-timeouts-in-windows.aspx
Based on the research, as the open shared folder is in a SMB session, the default timeout for SMB session is 15 minutes. If the SMB session is inactive for 15 minutes the server will send a TCP reset to close the SMB connection. Until the
Autodisconnect timer is reached, the server will send an NBT keep-alive packet every two minutes. If a client or server application is not written to properly handle network delays, it may terminate the session prior to the default timeout
period.
For more detailed information, please refer to the thread below:
Session doesn't close Shared Folder
https://social.technet.microsoft.com/Forums/en-US/54f658c8-3d41-4beb-9a2f-47b054a11b7a/session-doesnt-close-shared-folder?forum=smallbusinessserver
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot Start SI4 After New License

I have a test drive version of NW 4 running on Suse 9.2 Linux and db2. It ran fine for 3 months. Yesterday I installed a new license because the old one expired. I installed it as root while the db was running.
This morning, I cannot start sap, because the database won't start.
The following is the output of R3trans. Can anyone give me any suggestions on things to try to resolve it?
4 ETW000 R3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 30.10.2005 - 07:08:07
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d -w xx.log
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Oct 30 07:08:07 2005 148 0.000148
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000175
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 59 0.000234
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' ...
4 ETW000 57 0.000291
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/SI4/SYS/exe/run/dbdb6slib.so), hdl 0
4 ETW000 21464 0.021755
4 ETW000 [dev trc ,00000] Library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' loaded
4 ETW000 59 0.021814
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 59 0.021873
4 ETW000 [dev trc ,00000] Version of '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' is "640.00", patchlevel (0.7)
4 ETW000 137 0.022010
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 40 0.022050
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 40 0.022090
4 ETW000 [dev trc ,00000] New connection 0 created 35 0.022125
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 45 0.022170
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.022201
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 37 0.022238
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.022277
4 ETW000 [dev trc ,00000] RLIMIT_STACK: current=-1, max=-1 296 0.022573
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) database interface 640.00 [opt] 31 0.022604
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 27 0.022631
4 ETW000 [dev trc ,00000] (0.6) DB6: Schema setting for remote monitoring (note 711477)
4 ETW000 36 0.022667
4 ETW000 [dev trc ,00000] (0.7) DB6: support DB6_DB_TYPE=DB2/400 (note 663756)
4 ETW000 35 0.022702
4 ETW000 [dev trc ,00000] (0.7) DB6: CTE on UNICODE (note 717357) 23 0.022725
4 ETW000 [dev trc ,00000] Supported features: 22 0.022747
4 ETW000 [dev trc ,00000] - smart optlevel handling (non-UR, FAE) 32 0.022779
4 ETW000 [dev trc ,00000] - SQLExtendedBind for LOBs and Unicode (V8 or higher)
4 ETW000 38 0.022817
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 87 0.022904
4 ETW000 [dev trc ,00000] ..done 136 0.023040
4 ETW000 [dev trc ,00000] Sun Oct 30 07:08:08 2005 97739 0.120779
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (BEGIN) 67 0.120846
4 ETW000 [dev trc ,00000] &+*** DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1032N No start database manager command was issued. SQLSTATE=
4 ETW000 46 0.120892
4 ETW000 [dev trc ,00000] &+*** 57019
4 ETW000 37 0.120929
4 ETW000 [dev trc ,00000] &+***
4 ETW000 36 0.120965
4 ETW000 [dev trc ,00000] &+***
4 ETW000 37 0.121002
4 ETW000 [dev trc ,00000] &+*** ABAP location info '', 0
4 ETW000 49 0.121051
4 ETW000 [dev trc ,00000] &+***
4 ETW000 35 0.121086
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (END) 23 0.121109
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'SI4' as 'sapsi4' failed
4 ETW000 138 0.121247
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'SI4'"
si4host:si4adm 77>
si4host:si4adm 77> db2admin start
db2admin: Command not found.
si4host:si4adm 78> db2admin
db2admin: Command not found.
si4host:si4adm 79> db2start
10/30/2005 07:36:36 0 0 SQL8000N DB2START processing failed; a valid product license was not found.
SQL1032N No start database manager command was issued. SQLSTATE=57019

Yes, startsap is the base script, which calls other scripts, R3trans and db2start.
I didn't have any luck. I did find an indication on an IBM website that the error message related to the fact that the db2 license had expired. There is a command called "db2licm" which you can run to update the db2 license, but I couldn't find a license file.
I wonder if IBM imposes it's own license expiration separate from SAP's, and that IBM require a re-install. So, I gave up and just re-installed it. Oh well, re-installing is good practice.
Sorry I couldn't help you.

HT201068 why all videos from Chinese websites cannot be opened after the update??

why all videos from Chinese websites cannot be opened after the Remote Desktop Client Update 3.8.2 v1.1??

That's not a thing that can happen. Your problem with videos is unrelated to the Remote Desktop Client Update 3.8.2 v1.1.
There were several OS updates recently as well, which could have affected video playback though.
What application do you use to play the videos?
Are the videos streaming from the internet or are they downloaded first and then played?
what format are the videos? what file extension?

HT4623 i m using iphone 3gs & i m updating the OS from 4.1 to 6.1 ,,it is showing the message that ur iphone cannot be activated because the activation server is not temporarily unavailable

i m using iphone 3gs & i m updating the OS from 4.1 to 6.1 ,,it is showing the message that ur iphone cannot be activated because the activation server is not temporarily unavailable

Contact your Carrier...
Also see this discussion.
https://discussions.apple.com/message/21189708

HT1766 sorry can anyone help me...? my iphone is not starting and when i want to start it after the apple icon it appear that connect to itunes and when i connect it just there is one option and it says that restore your iphone.when i restore it says cant

sorry can anyone help me...? my iphone is not starting and when i want to start it after the apple icon it appear that connect to itunes and when i connect it just there is one option and it says that restore your iphone.when i restore it says cant restore... please help me...

See Here...
iOS: Not responding or does not turn on
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430

Each time my iMac reboots i am prompted to enter my FaceTime password. This just started occurring after the most recent security update.

Each time my iMac reboots I am prompted to enter my FaceTime password. This just started occurring after the most recent security update. When I put my password in the pop up just comes back, if I press cancle it goes away. Any ideas on how to get rid of this annoying popup?

I had the same problem. Try this. Launch FaceTime. Click the toggle to turn it off; or Command-K. Quit. Do a restart, you shouldn't get the popup. You could then turn FaceTime back on if you wish. Either way, the popup should be gone from then on.

HT5429 unable to use MAPs in india as well as Middle east - When I try it gives pop up message - cannot provide directions. The map server is not available

unable to use MAPs in india as well as Middle east - When I try it gives pop up message - cannot provide directions. The map server is not available

Here:
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

I am trying to factory reset my iPhone4 and it says I cannot activate it because the activation server is temporarly unavailble. What does this mean?

I am trying to factory reset my iPhone4 and it says I cannot activate it because the activation server is temporarly unavailble. What does this mean?

Troubleshooting activation issues

I keep getting the message that the calendar cannot be synced because the sync server failed to sync the ipad. How can I fix this?

I keep getting the message that the calendar cannot be synced because the sync server failed to sync the ipad. How can I fix this?

Have you previously synced photos to your iPad ? If so try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
In terms of iOS5, what version of iTunes have you got on your computer ? You need iTunes 10.5 to be able to download iOS 5

After running Appstore, the iphone cannot auto shutdown after the predefined time

After running Appstore, the iphone cannot auto shutdown after the predefined time.

Pressing the Home button only quits the selected application only. Doing so with Safari available will quit Safari, but this does not reset the iPhone.
The only way to Reset an iPhone is by pressing and holding the Home button and the Sleep/Wake button simultaneously until you see the Apple logo and then release.
No apple stores in the area but my sister and mom are going to an area where there is one so I guess I'll give it to them to take along and see if they can swap it out for another or fix it.
You must make an appointment at an Apple Store, so unless you are able to do so and unless you are able to go with them (especially if an exchange might be involved), I suggest giving AppleCare a call instead.

Essbase cannot start up after the DB server IP changed.

Similar Messages

Maybe you are looking for