Essbase.cfg : Port configuration

Hello,does anyone have experience concerning the parameters:- AGENTTHREADS - SERVERTHREADS - AGTSVRCONNECTIONS I have problems with the Essbase Agent, which hangs under some circumstances. So I try increasing the THREAD parameters in the essbase.cfg, but I don't really now what limit my system has (W2K SP2, 2 Processors, 2Gbyte RAM)Thanks in advance

Well start at http://www.oracle.com/technetwork/middleware/performance-management/documentation/index.html
It has links to different versions, bookmark and then you don't need to keep asking for links.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Essbase.CFG Configuration Settings for 11.1.1.3

can I please have a link for Essbase.CFG setting for 11.1.1.3
Thanks

Well start at http://www.oracle.com/technetwork/middleware/performance-management/documentation/index.html
It has links to different versions, bookmark and then you don't need to keep asking for links.
Cheers
John
http://john-goodwin.blogspot.com/

Essbase.cfg parameter

Hi everybody,Who knows about PORTUSAGEINTERVAL parameter.This parameter that can be setted in the Essbase.cfg file (ex:PORTUSAGEINTERVAL 10), seems no more documented (Iam using Essbase V6.5.1). Thanks in advance

is it PORTUSAGEINTERVAL or PORTUSAGELOGINTERVAL?? if it is the later one then here is the explanation (straightfrom documentation) PORTUSAGELOGINTERVAL n<table cellpadding="5" border="1"><tr><td>n</td><td>Represents the number of minutes between each check of thenumber of ports in use. The value of n can be any wholenumber from 1 - 60, with five as the recommended minimum anddefault value. Analytic Services ignores any portion of a non-wholenumber. For example, 2.5 is evaluated as 2 minutes. Statistics arewritten to the log immediately after each check.</td></tr></table><h2>Description</h2>PORTUSAGELOGINTERVAL enables you to set an interval at which tolog the number of ports being used. By analyzing the information inthe log, you can monitor port utilization and identify a need formore ports before end users are unable to connect.

Deleted CDMA USB Modem from Port Configurations... Can't get it back!

A while back, I was trying out a wireless USB CDMA modem. I didn't really like it and was mainly just using it for testing purposes, and after I was done with it I deleted the port configuration out of my Network Config, thinking A) I'd never need it again and B) It would repopulate or at least be able to be recreated if I wanted to use it again.
Well, this weekend I'm out of town in an area where I don't have an internet connection regularly and need the ability to connect without relying on WIFI. So I reactivated the USB modem and went on my way. As soon as I put the card in, though, nothing happens. Normally the card would automatically detect and even open up its own connection software in the title bar. This time, nothing. So I boot into Windows and test it out there: works fine. Detects, connects, loads webpages, everything. So it's not the card.
I go back into OS X and see if there's anyway to manually add it. I check in System Profiler, and sure enough, under USB the card is recognized. Not in modems, though, but I can't remember if it populated there before. Anyway, I go into Network Config, try to add a port, but the only things available are the typical Ethernet, Airport, Bluetooth, etc. No USB, no CDMA modem, nothing I need.
So what I'm thinking is, when I deleted the old CDMA modem setting in Network Port Configs, its pretty much permanently deleted it. My question is, is there any way for me to manually get it back? I really could use the benefit of this card at the moment.
Thanks for any help,
Bryan

I had not heard of that brand. Out here we get a lot of stuff from China and Korea.
After I wrote that last night, I had a closer look at my settings and the CDMA modem I have is shown in the Network Configurations panel -- yours is not, you say.
Sorry, if I was not clear about the point concerning Bluetooth. That panel provides a list of ALL modem drivers, so I was suggesting that you had a look in there, in case there might be a suitable modem driver you could use.
I had two of these modems (one was stolen) the first used that Null modem driver while the other used a Huawei driver that I had to work hard to make the local company find.
I just looked at the Franklin Support pages and as you say, they do not appear to have a driver listed for Macs, only the user guide.
As a late thought, and not wishing to sound funny at all: have you tried the other USB port? With one of the CDMA modems I had it would work perfectly in one port but in the other the computer never recognised it.
Message was edited by: Graham K. Rogers

Can't run form from Form Builder 10g - Port configuration problem?

Hi,
I have installed the Database (10.2.0.1.0) and the Developer Suite (10.1.2.0.2) on two Linux machines (Red Hat Enterprise Linux ES 4 Basic).
If I enter the frmservlet-URL manually everything seems to be fine.
In one case I enter http://127.0.0.1:8890/forms/frmservlet, in the other http://127.0.0.1:8889/forms/frmservlet; in BOTH cases I get eventually a dark square and the status bar says "Applet oracle.forms.engine.Main started".
HOWEVER, if I create a simple form with Form Builder and click on the Button with the green traffic light ("Run Form"), the form runs only on the machine where frmservlet listens on port 8890.
On the other machine (frmservlet configured to listen on port 8889) Firefox pops up, the URL "http://127.0.0.1:32979/6dOrpwghCqnp8PhMT7KVT533m3IaArqFbPqPBOztZXWYSsNy" gets called, and nothing else happens. The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and it stays like this forever.
I assume this is a port configuration problem, but I don't have a clue where to start.
Any suggestions how I should proceed are greatly appreciated.
Thank you very much in advance!

Hi Frank,
Thank you for your reply.
I doublechecked my configuration.
In the dialog Edit --> Preferences --> Runtime the Application Server URL is set to "127.0.0.1:8889/forms/frmservlet".
However, when I attempt to run the form, the URL "http://127.0.0.1:33140/W2dwbV9eXS2fPkuKlxNhCxFWdEihwDviat2uV7ycrSotqwDN" gets called.
The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and that's it.
I wonder how the port number 33140 got selected. Interestingly, this time it is a different number; last time it was port 32979. In fact, the port number seems to change each time; I tried again and now it is 33189.
I will now try to set the port number for the frmservlet to 8890.
I choose Edit --> Preferences --> Runtime and set the application server URL to "127.0.0.1:8890/forms/frmservlet".
I stop the container, open /home/oracle/OraHome_1/j2ee/DevSuite/config/default-web-site.xml and change the port number to 8890:
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE web-site PUBLIC "Oracle Application Server 10g XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">



<web-site port="8890" protocol="http"
display-name="Oracle Developer Suite 10g instance of Oracle Containers for J2EE Web Site">

 
 
 <default-web-app application="default" name="defaultWebApp" root="/j2ee" />

<web-app application="forms" name="formsweb" root="/forms" />


<web-app application ="reports" name="web" root="/reports" />
<web-app application = "reports" name="demo" root="/repdemo" />
 
 <access-log path="../log/default-web-access.log" />
</web-site>
I restart the container, start Form Builder, connect to the database, and open my test form.
When attempting to run the form, the URL "http://127.0.0.1:33437/Pl0n3ky9vmU5z37A7ScBnQhsGwq3jwuzJpgTAKWPMOYIzT8K" gets called (again a new port number, apparently picked radomly within a certain range) and nothing happens: "Waiting for 127.0.0.1...".
However, when I enter the URL http://127.0.0.1:8890/forms/frmservlet I do (eventually, after confirming that I trust the certificate etc.) get a darc rectangle and the status message "Applet oracle.forms.engine.Main started", which tells me that my setup can't be that far off target.
Here is the output of netstat:
[root@localhost ~]# netstat -anp --tcp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:32769 0.0.0.0:* LISTEN 2779/rpc.statd
tcp 0 0 0.0.0.0:23910 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2759/portmap
tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 4265/tnslsnr
tcp 0 0 0.0.0.0:113 0.0.0.0:* LISTEN 2983/xinetd
tcp 0 0 127.0.0.1:7830 0.0.0.0:* LISTEN 4429/spamd --port 7
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2928/cupsd
tcp 0 0 0.0.0.0:9240 0.0.0.0:* LISTEN 5269/java
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 3002/sendmail: acce
tcp 0 0 0.0.0.0:8890 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:32795 0.0.0.0:* LISTEN 4231/ora_d000_orcl
tcp 0 0 127.0.0.1:1521 127.0.0.1:32817 ESTABLISHED 4265/tnslsnr
tcp 0 0 127.0.0.1:32817 127.0.0.1:1521 ESTABLISHED 4209/ora_pmon_orcl
tcp 0 0 127.0.0.1:33425 127.0.0.1:1521 ESTABLISHED 5298/frmbld
tcp 0 0 127.0.0.1:1521 127.0.0.1:33425 ESTABLISHED 5311/oracleorcl
tcp 1 0 80.133.127.83:33485 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33484 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33494 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33520 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 80.133.127.83:33529 209.132.177.100:443 ESTABLISHED 4060/python
tcp 0 0 80.133.127.83:33528 209.132.177.100:443 ESTABLISHED 4060/python
tcp 1 0 80.133.127.83:33460 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33470 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 :::22 :::* LISTEN 2968/sshd
tcp 0 0 ::ffff:127.0.0.1:33437 :::* LISTEN 5298/frmbld
tcp 697 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33439 CLOSE_WAIT -
tcp 348 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33440 CLOSE_WAIT -
[root@localhost ~]#
The question remains: Where do those port numbers come from?
Regards,
jme

How can we transport the partner profiles and Port configurations

Hi everybody,
How can we transport the partner profiles and Port configurations. While creating these , system will not ask for Dev class and we cant assign any Transport request number. Then How can we transport these settings?
Your replies are really apreciable.
Thanks and Regards,
Vijay.

Hi,
please have a look of the OSS note: 182172
>>
The partner profiles are stored in the following tables:
Table EDPP1: General partner profile
Table EDP12: Partner profile outbound, additional data NAST
Table EDP13: Partner profile outbound
Table EDP21: Partner profile inbound
Table EDIPHONE: Connection to SAP telephony (optional)
You can use R3TR TABU to manually set the tables into a Customizing request (as of Release 46, into a SYST-type request).
<<
Rgd
Frédéric

Inconsistent port configuration on SP2 (ms/db is 3600 or 3610 ?)

Hi All,
Inconsistent port configuration on SP2 (ms/db is 3600 or 3610 ?)
Dear All,
There seems to be an inconsistency in the port configuration on the SP2 that could possibly explain why Tradelink (LN) sometimes is not able to connect to SP2.
- the saplogon.ini file seems to indicate SP2 has instance number 00
- SM51 indicates the DB server is system number 00
- the saprouttab indicates the message server has port 3610
- the services file also indicates port 3610
While this could be correct and simply means the DB server and MS server use different ports, this is not typical/logical. It also means for applications that are not able to distingu
Is it network issue??
Regards
Mohsin
SAP Basis Mumbai.

Hi All,
Inconsistent port configuration on SP2 (ms/db is 3600 or 3610 ?)
Dear All,
There seems to be an inconsistency in the port configuration on the SP2 that could possibly explain why Tradelink (LN) sometimes is not able to connect to SP2.
- the saplogon.ini file seems to indicate SP2 has instance number 00
- SM51 indicates the DB server is system number 00
- the saprouttab indicates the message server has port 3610
- the services file also indicates port 3610
While this could be correct and simply means the DB server and MS server use different ports, this is not typical/logical. It also means for applications that are not able to distingu
Is it network issue??
Regards
Mohsin
SAP Basis Mumbai.

Port Configuration EDI/IDoc

Please anybody can explain me in detail Port Configuration for EDI/IDoc(T Code WE21).
please explain how can i create new port.
it's urgent please.
thanks
RP

rp
check the following links
http://help.sap.com/saphelp_47x200/helpdata/en/af/7e844367c24d4a950df3205052769d/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm

Port configuration problem

After updating Safari, my "port configuration" does not recognize the built-in ethernet option and I can't connect to the internet using Safari. Everything else works properly - Any suggestions?

Hi Jim, and a warm welcome to the forums!
Are you saying that it doesn't show at all in Network>Show:>Network Port Configurations?
If you haven't yet try this...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, when complete reboot.

Switch port configuration for 3500i AP

Hi,
We are due to install a brand new enterprise WLAN based on the WiSM2 platform, 3502i AP and WCS. The APs will be plugged into the 2960S-24TPS-L.
I have scanned over all documentation and cannot for the life of me find a recommended switch port configuration for connecting the AP to the switch in terms of speed / duplex etc. For example, should I just configure the port to auto detect, or is forcing the speed / duplex the way to go. I could also do with knowing other best practice configurations for AP connectivity.
Any help would be greatly appreciated.
Chris.

The AP comes online with just auto detect, but I want to know if there are any benefits to forcing this to 1Gbps / Full duplex, or even if this is the right way to go. I suspect auto detect is the best method.

Update Essbase Cfg setting using MAXL or ESSCMD

Hi All,
I want to change the essbase.cfg settings using MAXL or Esscmd. Is this possible? I could figure out changing Substitution Variables but am looking forward to change settings like CALCCACHE, etc...
If yes, please let me know any insights on the same.
Thanks,
AJ.

There is no pre defined feature that allows you to do this, but if you want to override the values in .cfg file, depending on what those values are, you can just set them in your calc script, ie: CalcCache, etc. It is best to do this manually anyway, as once you finished, you will need to recycle the Essbase service for them to take effect.

Not finding ESSBASE.CFG

Hello Gurus!
I am very new to Essbase.
I had Hyperion Essbase 11.1.13 installed. When I added my first essbase server from the administration services console, it was added. Yet when I tried to open it i got the following error "Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again."
My problem is is that when I finally found the file essbase.cfg from F:\Hyperion\products\Essbase\EssbaseServer\bin, it consisted of the following:
; The following entry specifies the full path to JVM.DLL
JvmModuleLocation F:\Hyperion\common\JRE\Sun\1.5.0\bin\client\jvm.dll
BPM_Oracle_DriverDescriptor "MERANT OEM 5.2 32-BIT Oracle Wire Protocol"
BPM_DB2_DriverDescriptor "MERANT OEM 5.2 32-BIT DB2 Wire Protocol"
BPM_SQLServer_DriverDescriptor "MERANT OEM 5.2 32-BIT SQL Server Wire Protocol"
BPM_SQLServer_DriverDescriptor "SQL Server"
;BPM_Netezza_DriverDescriptor "NetezzaSQL"
BPM_Teradata_DriverDescriptor "Teradata"
BPM_ORACLEBI_DriverDescriptor "Oracle BI Server"
AuthenticationModule CSS
AGENTPORT 1423
SERVERPORTBEGIN 32768
SERVERPORTEND 33768
AGENTDESC hypservice_1
and I found nothing about NetRetryCount or NetDelay. Is it possible that I downloaded the file the wrong way and that the essbase.cfg isn't complete?
Also, I read in a forum post that essbase.cfg is supposed tp be located in the directory $ARBORPATH but I haven't found such a folder when I searched for it.
BTW I don't think it is exactly a network problem as I pinged the server and it worked just fine.
Any help is appreaciated. Thanks in advance :)

Thanks for response John :)
the essbase.cfg now looks like this:
; The following entry specifies the full path to JVM.DLL
JvmModuleLocation F:\Hyperion\common\JRE\Sun\1.5.0\bin\client\jvm.dll
BPM_Oracle_DriverDescriptor "MERANT OEM 5.2 32-BIT Oracle Wire Protocol"
BPM_DB2_DriverDescriptor "MERANT OEM 5.2 32-BIT DB2 Wire Protocol"
BPM_SQLServer_DriverDescriptor "MERANT OEM 5.2 32-BIT SQL Server Wire Protocol"
BPM_SQLServer_DriverDescriptor "SQL Server"
;BPM_Netezza_DriverDescriptor "NetezzaSQL"
BPM_Teradata_DriverDescriptor "Teradata"
BPM_ORACLEBI_DriverDescriptor "Oracle BI Server"
AuthenticationModule CSS
AGENTPORT 1423
SERVERPORTBEGIN 32768
SERVERPORTEND 33768
AGENTDESC hypservice_1
NETDELAY 1000
NETRETRYCOUNT 2000
is it missing something?like a semicolumn or sth?
Also, in the error msg it says:Update this file on both client and server. Restart the client and try again.
my questions are:
1- How do I update client and server
2- how do I restart the client?
Is there any reading material to help me with this?

Error on Send Port configured using HTTP adapter

Hi All,
For Load balancing purpose we have created new host and host instance and changed send handler for send port configured using
plain HTTP adapter.
We are getting below error after change:
A password is mandatory if UserName is specified
Parameter name: Password
Please advice.
Thanks
Pooja Jagtap Software Engineer KPIT Cummins

Have you updated the password for your Host instance . Try restarting your host instance once .
Thanks
Abhishek

Unable to start Essbase app when activating JVM in Essbase.cfg

Hi,
I am using Essbase 6.5.3, one of my application that uses a CDF won't start when activating the JVM in Essbase.cfg. Please help. Thanks.

I have successfully tested CDF in Essbase v6.5.7.
Can you please answer below questions.
1. Did you place the CDF file at respective location ?(Normally, there is a JAVA directory and you can place in that directory or create a new directory and place it in that directory under JAVA)
2. Did you update udf.policy file? Updating this file is required if you are using a cdf function like JExport which will extract the data and store in a file or database.
3. Did you set the JVM to the correct location? When you start an application are you getting a message like "JVM Initialization Failed". If the message appears, then the possible cause would be with your JVM setting.
4. Did you register the function to that specific application? You can register it directly from Application manager or use a MAXL Script to register the function.
Once you have successfully done the above steps, restart the application and check the log file
If successfully registered, you will see a message as
"Function "@JExport" registered [OK] (Similar kind of message.
If you still get error message, please post the log file content of that application.

What smtp port configuration should I use?

All of a sudden, I can't get my mail to go out. What port configuration should I use? What else can be the problem?
Bob

You have to use DHCP.. there is no other option that will work because the modem is not a router.. Unfortunately apple hide any more sophisticated controls so there is nothing much you can do other than power cycle the TC when it gets lost.

Essbase.cfg : Port configuration

Similar Messages

Maybe you are looking for