Essbase - Data not saving in excel add in
Hi everyone,
This is my first time building a cube from scratch and would appreciate if you guys can point me to the right direction. I am currently running into issues with saving data using Excel add in. I have a BSO cube with 6 small dimensions (Currently with less than 15 members in each) + 2 additional attribute dimensions. I created the cube manually in EAS and did a sample data load through a flat file without any issues.
I have been able to use the Excel add in to retrieve the sample data and navigate the tree without any issues as well. However when I tried to retrieve/lock and send , manual changes on the grid, the data doesn't seem to save. When I hit retrieve my changes are gone.
I haven't made too many changes to the default settings but have checked that the application allows for updates and that I have the Application Manager Application access as well. Are there any settings I should look into that might be causing this?
Thanks in advance for your help.
Tony
two possible issues
1. The member you are trying to send data to is a dynamically calculated member
2. you are trying to send data to a member that is the only child of a parent and the parent is not tagged as never share. If there is a one to one relationship between a child and parent, there is an implied share that is created. The NEver Share on the parent will fix that.
Similar Messages
-
Manual Layout data not saving to trx cube
Hello BPS Experts,
I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
case 1) No error / warning
I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
case 2) message - No data to be saved
sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
Regards,
BWer
Message was edited by: BWerHello BWer,
One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
Sunil -
Response data not saved in PDF
Dear All,
I created an interactive form with a web service. I filled in the form and sent all the datas in SAP through the web service.
All worked properly except that I have a return message from SAP. This message is binded in my form as response field.
I saw my message in the form when the WS is finished but I saved the PDF on my PC.
When I look at my PDF later, the return message is disappeared, it is not saved in my PDF as all the other fields.
Thanks to help me
Kind regards
Véronique.Dear all,
Can someone help me ?
All the other data are saved in the document. But I think that it is because the return message is not keyed but is only a answer in the web service, the PDF can't save it ?
If I change the field (add some character after the return value from SAP) and I save, the value is kept.
Could someone tell me how to do ?
My button is an Execute one with the data connection on my web service.
If I re-merge data, all the fields become empty except the response return message. Even in this case, the message is not saved in the PDF.
It is important !
Thanks
Kind regards
Véronique -
I'm using using MSSQServer 2014 Trial with Master Data Services installed. I have connected to the MDS server with the Excel 2010 MDS Add-In.
Models are not listed in the Add-In's Explorer browser. When I open the MDS server with IE, no models are listed either.
I can view them locally on the server in IE.
There are no remote DB access issues.
Is it just that the 2014 Trial version does not supply this info remotely??Was a Model Permission issue. Fixed here: http://technet.microsoft.com/en-us/library/ff487055.aspx
Would be good if the interface would show some kind of alert to that fact. -
Hi
I have been trying to save a already existing excel document (Microsoft 11) however now getting a message saying "Document Not Saved" I have already tried Saving as and in another location
What could be the problem and/or solution
Thank you in advance
Samhttp://answers.microsoft.com/en-us/mac/forum/macexcel?tab=QnA
-
hi,
i'v a prob. that once i create quation through va21 then it create and saved data.
now when i create sales order through va01 then it show data saved and gave the sales order no.
but when i 'm going to change it then message comes order not in data base.
when i saw the data in table like vbak/ vbap then i found no data.
what is the prob.
pl. help me.
mukeshHi Mukesh,
May be the data is not saved at all. Use TCODE SM12 and SM13 to check if there are entries for the corresponding table under processing
Regards -
"Document Not Saved" Microsoft Excel 2010 SP1
We have a remote office which has a 2mb WAN link, The users in the remote office have a variety of Office installs from 2003 to 2010 SP1.
When attempting to open an excel file over the WAN link (The file is on our main shared drive in Sydney) they can open and edit the document however when it comes to saving they receive "Document not saved" and the original document is gone and a .tmp file
remains where the original file was on the network drive/shared folder.
If they then hit save a second time it saves correctly and the document is in the correct .xls format.
The excel files do have some funky tables etc in them and are a few mb's in size, however we have the same issue with a new excel document with only one word written in it.
Does anyone know what would be causing this issue?
We have tried added NetworkResiliency and PivotTableNetworkResiliency as per http://support.microsoft.com/kb/291204.
We have tried removing certain hot fixes from Microsoft as mentioned in http://support.microsoft.com/kb/983458.
We added the share to be a trusted site.
There are no errors in Event Viewer.
I have found another few threads on similar issues with no fix:
http://social.technet.microsoft.com/Forums/en-US/office2010/thread/f559b061-b98f-4b33-ab8a-d1a41d2e8cb8/
http://social.technet.microsoft.com/Forums/en-US/officeappcompat/thread/4af962a0-d883-4e82-8995-7eb766d6c720
We do have a RiverBed at the remote office and one at the site in Sydney which is for network optimization. On the RiverBed with have all CIFS ports added and QoS marking done so it should be optimized.
Any assistance with how to fix this annoying issue would be greatly appreciated.
ThanksWe're having the same exact issue in our office where we just installed a new Riverbed Steelhead as well... only happening in that office as well...User opens a document on a network share that the rest of the company works from day to day, they save 10
or 20 minutes later and BAM... "There has been a network or file permissions error. The network connection may be lost", then a non-hidden *.tmp file is then created in the same network directory as the actual file and the original file doesn't get
written to, you click [OK] on the error and then try to save again and it magically works...and you're left with a messy TMP file as well in the directory now. I doubt it's related to antivirus, definitely not firewall, reinstalling/repairing office and tweaking
settings doesn't help, I agree it has nothing to do with locking files or read-only files as they're plain old word docs and excel files...MAYBE it has to do with the Riverbed WANOP appliance but either way... don't you love how this thread just randomly died
with no solutions? :'( Thanks Micro$oft ;)
{Edit} Oh! And one last thing...this MIGHT help steer someone in the right direction in the future... there could be a problem related to your network filer such as a NetApp appliance, EMC, Netgear etc where there is an SMB version mis-match or a bug of some
kind requiring you to apply a patch your storage device in order to fix this type of issue. -
Hierarchy Data not saved after Hierarchy Load
Hi Gurus,
I am facing a problem with the hierarchy data load in SAP BPC NW 7.5 SP06. I have already used /CPMB/IMPORT_IOBJ_MASTER & /CPMB/IMPORT_IOBJ_HIER once to load the data from BI to BPC and it worked fine that time.
Now I have made some changes in the Hierarchy at the BI side. When I run the package link list, the /CPMB/IMPORT_IOBJ_MASTER chain runs fine and the master data, description for Attribute and Hierarchies are loaded perfectly. But whn the /CPMB/IMPORT_IOBJ_HIER is run, the changes are not saved in the BPC Member sheet. I have manually make the changes in the member sheet and Process the Dimension.
Can we process the Dimension explicitly after the Hierarchy load again?
Does anyone have an idea about this?
Any help is appreciated.
Thanks,
AbhishekAbhishek,
Double check whether /CPMB/IMPORT_IOBJ_MASTER is bringing all the ID's,Texts and Hierarchy Nodes. If required drop the data from dimesion member sheet and load it again.
Double check the Hierarchy and level setup while running /CPMB/IMPORT_IOBJ_HIER.
(when we are in SP05, it was not bringing the multiple Hierarchies, now we are in SP07 loading multiple hierarchies but not the TEXT fo the Id's some inconsistency)
Thanks -
Data not saving in Custom Infotype
Dear Experts,
I have created a custom infotype, 9003, for this I creates a structure ps9003.
And I have to create a primary key field in my infotype, so I added a field in PA9003 as key field.
Now this key field was not coming in the infotype screen, so I added it using screen painter.
But now when I save the data the data is not saved in this key filed.
Please Suggest.
Warm Regards,
Upendra AgrawalHi
As of my knowledge the primary key for the PA infotypes will be MANDT+PAKEY structure. What is the need of adding the primary key.
- While creating the custom infotype using PM01 screen will be automatically generated for the fields declared in PS structure
- Screen Generation will wipe out the custom written on the fields so this is to be carefully handled.
- if you added the field check logic in PAI & PBO
- Check are you passing the data back to the infotye structure -
Hi,
Just got done installing Essbase 11.1.1.2 on a single Win 2003 server. Everything is installed EAS and Essbase Client. However, I need the Essbase Client to be ported to many users that are running Excel 2003. Also, i need EAS client to run from a laptop as instead of having to remote login to the server. My question is do I go through the same install process as I did for Essbase server? Or is there a smoother less complicated way to install. I think for the EAS client, it's ok but trying to roll the Excel Add In to hundreds of users, this could get messy.
ThanksSystems management software like Microsoft SMS, Landesk or Radia should be able to help you to deploy software to many PC.
You can ask your IT whether they have this in place.
Otherwise, you can consider to use Smartview instead of Essbase Add-Ins, Smartview allow you to deploy the software to many PC and future upgrades. -
Data not saving in flowable form
Hi,
I have created a form where there are flowable and positioned parts. In the attachment section, data entered into Attachment A (flowable) seems to save, but after saving, closing and re-opening, the data has not saved. The data entered into Attachment B and the rest of the form does save.
Can I send the file to someone to have a look?
Thanks.Please send your form to [email protected]
I will try to look into the issue..
Nith -
The order of attributes from an Attribute Group is not reflected in Excel Add-in
It looks like the order of my attributes in an attribute Group is not reflected in the Filter dialog in the Excel Add-in. Any way that I from server side can handle the attribute order in Excel?
The order is correct in the Attribute Groups in the Web UI.
/StigDear Sai,
Take help of ABAPer to capture the header or item text in to the print copy of sales order ,delivery and invoice.
I hope this will help you,
Regards,
Murali. -
File- XI- IDoc: Idoc header data not saved correctly
Hi guys!
I have a very strange problem:
I have a file to xi to IDoc scenario. Everything seems to be fine, IDoc is created in target system, but with strange error: <MESCOD>XX</MESCOD> segment is not written in IDoc header segment. This segment is available in message sent to ECC (after mapping), so there is no problem with ommiting the segment in mapping. But it's not saved.
This scenario worx fine in QA, but not in PRO.
Any ideas, what to look at?
Thanx a lot! OlianHi,
check the IDoc which was in PROD. and see the ibound status and actual reason .
depending upon the actual status you can resolve the issue.
Chilla -
Essbase error msg while using Excel add-in: data item found before member
We're encountering an Essbase error message "data item found before member" on 2 of 4 cubes. Has anyone else encountered this msg, and does anyone have an idea how to resolve it. It occurs on multiple machines in development and testing environments.
As dougadams said, some members can be converted by Excel so that essbase no longer treats them as labels. Typically this includes numeric member names (i.e. accounts) and dates. I find the dates to be more of an issue than numeric member names, because it typically changes the date format as well. Either way, using a single quote as a prefix to the member name will tell Excel to treat it as a text entry, and hence a member/label to Essbase.The above is almost always the reason for the error you got. Of course, it's also possible that you really do have a numeric entry somewhere before your first 'data cell' in the template, especially if you did some manipulation of the template.
-
SubReport Data not Exported to Excel Crystal Version10
Hi,
I have a main report and subreport in page header which displays Company Name ,
When I export the report data to excel only the main report data is exported no subreport data is exported.
Please can anyone let me know if this is a bug ... or am I missing out anything.
I am using crystl reports version 10
Cheers
RahulHi Rahul
As the subreport is placed in the page header, it will not export the data of the subreport to MS Excel Data only. This is an export limitation.
In order to display the data of the subreport you can either use MS Excel (not Data only) or place the subreport in other sections of the main report.
Thanks
Poonam Thorat
Maybe you are looking for
-
Mighty Mouse: Problems with it everyday!
Can someone please advise me on what to do with my new mighty mouse? I've had it for a couple of months now, and everyday it is affected by at least one of three functional glitches. These are: 1. The click, scroll and side bars stop functioning (the
-
Inserting carriage returns in metadata when using fcsvr_client createasset
Anyone know how to insert a carriage returns into a field when using fcsvr_client createasset? For example: ./fcsvr_client createasset paassetspot /dev/6/test.mov PAMD_CUSTNOTES="With \n line \n breaks"
-
I have a portlet written in .NET that allows a user to upload a file that is saved to a server and some back-end processing is done. I'm running into an issue where I can't upload a file over 80 MB. I have adjusted the setting in .NET to allow the fi
-
I've tried uninstalling, including all personal information, etc., then reinstalling without any importing of external data-- in other words, a very fresh and clean installation. Still, I can't get Silverlight to run at the Fidelity site. Internet Ex
-
I want the computer to keep a history of all the site they have searched, but can not know for sure if they turn on/off the private browsing function. Is it possible to disable the private browsing function and put a lock / password on it ? Thanks, D