Essbase doesnt start after DST patch

Dear Friends - We are using Essbase server version 7.1.5. Recently we applied the DST (Daylight saving) patch on our Essbase server and operating system (Unix AIX) and after that we are unable to start Essbase on our servers. The message it gives is "The Essbase license is already in use, or the license file does not contain a valid server type. Please make sure the license is available or please contact Technical Support to validate your license file. " We tried using new license file without any help. Could anyone please help us on this.

Hi Bill, Thanks for your response. We use the license file directly in our Essbase servers instead of using license server. We have the path of the license file in the essbase.cfg file. After the DST patch was applied by our system administrators, we attempted to start the Essbase using the custom startup scrript we have (one which we use to start Essbase). The script does the following : 1. runs the .profile 2. export ARBORPATH and LIBPATH 3. start Essbase with the 'ESSBASE' command in background mode. We found that Essbase is not starting and the log gave us the message mentioned in our topic. Could you give us any clues what might have happened. Thank you once again. Regards -

Similar Messages

Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150;30

Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150:30

Yes, Actually was done from an Apple Genius at the apple store, the hard Disk was formatted and then re installed everything from back up.

My Imac doesnt start after de pasword, It continuos asking for it again and again, what can I do to start it?

My Imac doesnt start after de pasword, It continuos asking for it again and again, what can I do to start it?

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination   command-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, start up in Recovery mode. When the OS X Utilities window appears, select
          Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
           ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

Lightroom 6 doesnt start after installation

hello,
after installing LR6 on imac 2013 os 10.9.5 doesnt start LR correct. When you start LR you can see the start picture of LR for a very short time. Than the picture disspear and nothing happens anymore. LR doesnt start. Is the any one with the same problem? Solution?
regards in hope of help
bodo

Try signing out of the desktop app per these instructions: Sign in, Sign out | Creative Cloud desktop app

Addon-Manager doesnt start after updating to Firefox 9.01

After updating to Firefox 9.01 the Addo-Manager doesnt start. The screen only shows loading...

Click on the Extensions item on the Addons Manager tab.

Macbook pro doesnt start after office installation

after installing mac office my mac book pro doesnt start anymore

Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao.

Fifa 14 doesnt start after Updating Windows 8.1. Update is -KB2919355.

So back in March when i installed this update everything was running smoothly. After installing the update Fifa 14 doesnt even start like after clicking the launcher nothing happens. I reinstalled my program, Direct X and .net Framework but nothing worked.
So help me maybe?

Hi,
To be added, please also check Event viewer if it identify this problem, In addition, try to run this application as admin for test.
If problem persists, try to reinstall FIFA for test.
Roger Lu
TechNet Community Support

J2EE on Windows App server wont start after JSPM patching

Hi,
I've patched an ECC6 system on DB2 V5R4 to SP16 level on ABAP side, and Enhancement pack 3, and then did an update to JSPM and installed new SP16 levels of the Java components.
Now my Windows App server starts only the ABAP Work processes, not the J2EE side. I get a yellow light and the message
J2EE Status info unavailable.
On the Windows work directory for Dialog instance D00, I see that the dev_server0 has only messages about the last shutdown 2 days ago.
The dev_jcontrol has errors in it abot Unknown property and
JStartupICheckFrameworkPackage: can't find framework package U:\usr\sap\WFD\D00\exe\jvmx.jar
see below.
Any ideas?
regards
Michael.
trc file: "U:\usr\sap\WFD\D00\work\dev_jcontrol", trc level: 1, release: "700"
node name   : jcontrol
pid         : 2308
system name : WFD
system nr. : 00
started at : Thu Sep 25 15:46:00 2008
arguments       :
       arg[00] : U:\usr\sap\WFD\D00\exe\jcontrol.EXE
       arg[01] : pf=
sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
       arg[02] : -DSAPSTART=1
       arg[03] : -DCONNECT_PORT=64990
       arg[04] : -DSAPSYSTEM=00
       arg[05] : -DSAPSYSTEMNAME=WFD
       arg[06] : -DSAPMYNAME=dfbhl6_WFD_00
       arg[07] : -DSAPPROFILE=
sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
       arg[08] : -DFRFC_FALLBACK=ON
       arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 2040] Thu Sep 25 15:46:00 2008
[Thr 2040] *** WARNING => INFO: Unknown property [instance.box.number=WFDD00dfbhl6] [jstartxx.c   841]
[Thr 2040] *** WARNING => INFO: Unknown property [instance.en.host=sapdev] [jstartxx.c   841]
[Thr 2040] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx.c   841]
[Thr 2040] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
JStartupReadInstanceProperties: read instance properties [U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties]
-> ms host    : sapdev
-> ms port    : 3941
-> OS libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
-> Admin URL :
-> run mode   : safe
-> run action : UPGRADE
-> enabled    : no
Used property files
-> files [00] : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : sapdev
-> ms port    : 3941
-> os libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
-> admin URL :
-> run mode   : safe
-> run action : UPGRADE
-> enabled    : no
Bootstrap nodes
-> [00] bootstrap            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID2623900 : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID2623950 : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID2623900            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
-> [01] ID2623950            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
[Thr 2040] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 3504] JControlDPMessageProxy: Thread 3504 started as handler thread for R/3 dispatcher messages.
[Thr 2040] [Node: bootstrap] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_13
[Thr 2040] JStartupICheckFrameworkPackage: can't find framework package U:\usr\sap\WFD\D00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name          : bootstrap
-> node type          : bootstrap
-> node execute       : yes
-> java path          : C:\j2sdk1.4.2_13
-> java parameters    : -Djco.jarm=1 -verbose:gc -Djava.compiler=jitc -Dos400.run.mode=jitc -Dos400.disable.explicit.gc -Dos400.define.class.cache.file=/usr/sap/WFD/SYS/j2ee/cache/QDefineClassCache.jar -Dos400.define.class.cache.hours=9999 -Dos400.define.class.cache.maxpgms=40000 -Djava.ext.dirs=/usr/sap/WFD/SYS/j2ee/ext
-> java vm version    : 1.4.2_13-b06
-> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type       : server
-> java vm cpu        : x86
-> heap size          : 512M
-> root path          : U:\usr\sap\WFD\D00\j2ee\cluster
-> class path         : .\bootstrap\launcher.jar
-> OS libs path       : U:\usr\sap\WFD\D00\j2ee\os_libs
-> main class         : com.sap.engine.offline.OfflineToolStart
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : U:\usr\sap\WFD\D00\exe\jstartup.jar;U:\usr\sap\WFD\D00\exe\jvmx.jar
-> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0026239
-> debuggable         : yes
-> debug mode         : no
-> debug port         : 60000
-> shutdown timeout   : 120000
JControlStartJLaunch: program = U:\usr\sap\WFD\D00\exe\jlaunch.exe
-> arg[00] = U:\usr\sap\WFD\D00\exe\jlaunch.exe
-> arg[01] = pf=
sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
-> arg[02] = -DSAPINFO=WFD_00_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_2308
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=U:\usr\sap\WFD\D00\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=U:\usr\sap\WFD\D00\work\std_bootstrap.out
-> arg[09] = -locOutFile=U:\usr\sap\WFD\D00\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=
sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=4556
-> arg[14] = -DSAPSYSTEM=00
-> arg[15] = -DSAPSYSTEMNAME=WFD
-> arg[16] = -DSAPMYNAME=dfbhl6_WFD_00
-> arg[17] = -DSAPPROFILE=
sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;U:\usr\sap\APD\D31\exe;
sapdev\SAPMNT\APD\exe\run_nt;U:\sapdb\programs\bin;U:\sapdb\programs\pgm;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\WINNT\AS400WSV\Admin;C:\WINNT\AS400WSV\Service;C:\WINNT\AS400WSV\Drivers;C:\PROGRA1\IBM\CLIENT1;C:\PROGRA1\IBM\CLIENT1\Shared;C:\PROGRA1\IBM\CLIENT1\Emulator;C:\Program Files\Symantec\pcAnywhere\;;
sapdev\sapmnt\WFD\SYS\exe\uc\NTI386;U:\usr\sap\WFD\D00\exe
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;U:\usr\sap\WFD\D00\j2ee\os_libs;U:\usr\sap\APD\D31\exe;
sapdev\SAPMNT\APD\exe\run_nt;U:\sapdb\programs\bin;U:\sapdb\programs\pgm;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\WINNT\AS400WSV\Admin;C:\WINNT\AS400WSV\Service;C:\WINNT\AS400WSV\Drivers;C:\PROGRA1\IBM\CLIENT1;C:\PROGRA1\IBM\CLIENT1\Shared;C:\PROGRA1\IBM\CLIENT1\Emulator;C:\Program Files\Symantec\pcAnywhere\;;
sapdev\sapmnt\WFD\SYS\exe\uc\NTI386;U:\usr\sap\WFD\D00\exe
[Thr 2040] Thu Sep 25 15:46:26 2008
[Thr 2040] JControlExecuteBootstrap: read instance values after global bootstrap
[Thr 2040] *** WARNING => INFO: Unknown property [instance.box.number=WFDD00dfbhl6] [jstartxx.c   841]
[Thr 2040] *** WARNING => INFO: Unknown property [instance.en.host=sapdev] [jstartxx.c   841]
[Thr 2040] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx.c   841]
[Thr 2040] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
JStartupReadInstanceProperties: read instance properties [U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties]
-> ms host    : sapdev
-> ms port    : 3941
-> OS libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
-> Admin URL :
-> run mode   : safe
-> run action : UPGRADE
-> enabled    : no
[Thr 2040] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
Used property files
-> files [00] : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : sapdev
-> ms port    : 3941
-> os libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
-> admin URL :
-> run mode   : safe
-> run action : UPGRADE
-> enabled    : no
Bootstrap nodes
-> [00] bootstrap            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID2623900 : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID2623950 : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID2623900            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
-> [01] ID2623950            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
[Thr 2040] JControlCheckRunMode: run mode of the instance = safe
[Thr 2040] Instance is disabled -> terminate.
[Thr 2040] JControlCloseProgram: started (exitcode = -11113)
[Thr 2040] JControlCloseProgram: good bye... (exitcode = -11113)

Thanks Kaushal,
I hadn't done any changes to UME, but I have got a JSPM support package (EP-PSERV SP16) in status of ERROR that seems to be at the bottom of the problem.
Apparently, JSPM is not able to cope with any flavour of IBM DB2 (Windows, AIX, or i) at a point in this support package. There is a note 1156313 and it matches the error which is in the sdm log file:
Sep 25, 2008 4:51:32 PM Info: 16:51:31 2008-09-25 dbs-Info: WCR_USERSTAT modify column LOGONID to   type : VARCHAR,len : 255,dec : 0,not null : true,default :
Sep 25, 2008 4:51:32 PM Info: 16:51:31 2008-09-25 dbs-Info: WCR_USERSTAT modify column LOGONID to   type : VARCHAR,len : 255,dec : 0,not null : true,default :
Sep 25, 2008 4:51:32 PM Info: 16:51:31 2008-09-25 db4-Info: existsData() returns true.
Sep 25, 2008 4:51:32 PM Info: 16:51:31 2008-09-25 dbs-Info: Action: CONVERT
Sep 25, 2008 4:51:32 PM Info: 16:51:31 2008-09-25 dbs-Info: Action: CONVERT
Sep 25, 2008 4:51:32 PM Info: 16:51:31 2008-09-25 dbs-Info: Table has to be converted
Sep 25, 2008 4:51:32 PM Info: 16:51:31 2008-09-25 dbs-Info: Table has to be converted
Sep 25, 2008 4:51:32 PM Info:
Sep 25, 2008 4:51:32 PM Info: E R R O R ******* (DbModificationManager)
Sep 25, 2008 4:51:32 PM Info: 16:51:31 2008-09-25 dbs-Error: Table WCR_USERSTAT: Conversion currently not possible
Sep 25, 2008 4:51:32 PM Info:
Sep 25, 2008 4:51:32 PM Info: E R R O R ******* (DbModificationManager)
Sep 25, 2008 4:51:32 PM Info: 16:51:31 2008-09-25 dbs-Error: Table WCR_USERSTAT: Conversion currently not possible
Meanwhile, the commands in the note don't work as the DB   (Owner ) *ALL
PUBLIC    *EXCLUDE
regards
Michael

Report service doesn't to start after developer6i patching on windows OS

Hi hsawwan ,
I am unable to start report and apps listener service after developer 6i patching on windows platform.
m getting below error while starting report service.
Setting service OracleReportServer-Rep60_UAT to mode 2
Executing service control script:
d:\APPSORA\uatcomn\admin\scripts\UAT_diw-erpweb-01\adrepctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Wed 02/11/2009 08:57 AM
Starting reports server for UAT ...
The Oracle Reports Server [Rep60_UAT] service is starting.
adrepctl.cmd exiting with status 2
.end std out.
The Oracle Reports Server [Rep60_UAT] service could not be started.
A service specific error occurred: 186.
More help is available by typing NET HELPMSG 3547.
.end err out.
Hi guys, anyone who has face this issue before please help me to get it resolved .
Regards
Nitin

no sir,
See the below text from autoconfig log .
Starting AutoConfig at Wed Feb 11 09:04:01 2009
Using adconfig.pl version 115.81
Classpath : d:\APPSORA\uatcomn\util\java\1.4\j2sdk1.4.2_04\jre\lib\rt.jar;d:\APPSORA\uatcomn\util\java\1.4\j2sdk1.4.2_04\lib\dt.jar;d:\APPSORA\uatcomn\util\java\1.4\j2sdk1.4.2_04\lib\tools.jar;d:\APPSORA\uatcomn\java\appsborg2.zip;d:\APPSORA\uatcomn\java
===========================================================================
Starting Utility to Report Version Conflicts at Wed Feb 11 09:04:02 AST 2009
Using VersionConflictListGenerator.java version 115.2
All driver files processed.
No version conflict encountered.
===========================================================================
ERROR: Context Value Management Failed.
Terminate.
The logfile for this session is located at:
d:\APPSORA\uatappl\admin\UAT_diw-erpweb-01\log\02110904\adconfig.log

Apache service doesnt start after clone

Hi
we have a cloned environment and after clone finished successfully (as mentioned in logs ) , Apache service doesn't start at all while all other services are started successfully
andwhen i issued adapcctl.cmd it resulted error status 2 . i think this might help .
E:\oracle\testcomn\admin\scripts\TEST_oratestapp>adapcctl.cmd start
ECHO is off.
ECHO is off.
Tue 01/03/2012 01:54 PM
Starting Oracle Apache Server TEST_oratestapp ...
The Oracle Apache Server TEST_oratestapp service is starting.
The Oracle Apache Server TEST_oratestapp service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
adapcctl.cmd exiting with status 2
E:\oracle\testcomn\admin\scripts\TEST_oratestapp>
Apps Version : 11.5.10.2 CU2
DB : 10.2.0.4
OS : Windows server 2003 SP2
Regards
Ahmed

we have a cloned environment and after clone finished successfully (as mentioned in logs ) , Apache service doesn't start at all while all other services are started successfully
andwhen i issued adapcctl.cmd it resulted error status 2 . i think this might help .Please check Apache log files as well as startup log file for details about the error.
Did AutoConfig complete successfully?
Thanks,
Hussein

Bug: Labview doesnt start after Update to LV 7.1.1

Hello,
someone here with solution for this problem?
You can reproduce it by doing these steps:
1.) Install Labview 7.1
2.) Install an executable Labview-program compiled/created with LV 7.1.1
3.) Install the LV-Update 7.1.1
4.) Try to start Labview.exe
Here I get an pop-up with the text:
Executable version (LV7.1.1) doesn´t match resource file (LV7.1)
[OK]
The only thing i can do is to uninstall Labview 7.1.1 and the Runtime 7.1.1 and the reinstall Labview 7.1.
But there is no way to install the update on a normal way.
I think the problem is, that the executable programm already installs the Runtime 7.1.1 and makes some registry-things. So when installing the update after that, then the registry is already 1/2 updated and something goes wrong.
Perhaps i only need one more registry-entry to get rid of the pop-up.#
Thanks for your help

Edit:
Executable version (7.1.1) doesn´t match resource file (7.1).
Check your configuration.
[OK]
This is the full message-popup.
The problem has to be somewhere else. On another computer i tried the steps i described above but there i had no problems to update.
So the main-question is: What can i do against this popup?

Macbook doesnt start after typing password

Hi, My Macbook keeps shutting down when i try to start. It lets me go in to username and lets me type login password. Then there will be a bar like an update bar running and when it reaches about 40% it shuts off. Tried to do apple dianostics but it never completes.
I bought one and half year ago so i dont have warrenty. Help.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Mac mini A1176 doesnt start after Security update 2012-001 (10.6.8)

it has istalled 2Gb RAM insted of original 500Mb but it used to work well before the update

Also:
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

Pfile missing after vtm patch

Hi,
we have applied vtm patch for the database, changing the o_h from 11.2.02_Q311 to 11.2.0.2_Q112 (311--3rd quarter 2011, 112-- 1st quarter 2012), the patch went fine and the database was up and running. The pfile was located in different folder and we use to create the softlinks for accessing the pfile from o_h/dbs.
Now my teammates reported that the pfile is not there for this database and the database is up and running. I'm not in office now, so I cant work on my desktop. Is there any way to create pfile from the running database. the database which was started after vtm patch is running now. but I cant find the pfile. so I wanted to create it.
1) we are not using SP file, we are using only pfile.
2) the softlink in the new o_h is still there.
3) is there any bug that causes this issue after vtm patch activity?
Thanks and Regards
Venkata Sudheer

Good to hear that you got it solved.
Furthermore... you also can use the alertlog file to retreive all non default initialisation parameters of your instance and recreate the pfile from it (regardless Oracle version)
Only, and very handy, the 'create pfile from memory' is only available from 11g.
Regards,
Thierry

Oem web page will not display after O/S dst patch

Hello,
The Grid web page will not display after we DST patch for the o/s.
All below start fine without any errors:
emctl start oms
emctl start iasconsole
opmnctl startall
emctl start agent
The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
What logs should I be looking at to figure why the web page is not displaying? Thank you.

Provide the output of these comands:
$OMS_HOME/bin/emctl status oms
$OMS_HOME/opmn/bin/opmnctl status
$AGENT_HOME/bin/emctl status agent
$DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
SELECT STATUS FROM V$INSTANCE;
EOF
$DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
Regards

Essbase doesnt start after DST patch

Similar Messages

Maybe you are looking for