Essbase EAS Cannot Add or See Essbase Server

Hi,
Essbase 11.1.2.2. fresh install.
On EAS when trying to add a new server, or see a server list I get errors.
The server list is empty.
If I manually add a server along the lines of localhost:1423 or similar then I get network error 10061 failed to connect to localhost:1423
I have an identical install on another p.c. and have checked that all services that are up on the one that works are also up on the one that does not - they are.
Running valildation diagnostics my problem areas are; -
Hyperion Foundation;
Checking availability of HTTP context
http://myserver.local.net:19000/raframework/index.jsp Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started (Which application am I checking is started??)
EPM System Registry
Reg:Registry
Next Issues are present: Webanalysis_Product (id: 72038fa..........):
"PersistantKey" property missed
"Logical_Web_App" child missed
Agent (id: 72039fa....... different to above!)
"loglevel" property missed
Error: Checker execution failed
Recommended Action: Refer to the validation logs for exception details - (where are these logs???)
Anyone assist in likely causes of my errors, and or tell me where to look for further detail??
thanks,
Robert.

Hi John,
I have reviewed the logs.
Both HyS9RAFrameworkAgentErr and Out are 'clean' - i.e. no errors reported, last status on Out is Starting Application....
However, HyS9EPMServer-syserr / sysout are less than clean...
I have a recurrent error =>
java.lang.NullPointerException
   at com.brio.one.client.ClientFactory.getDefaultGSM (Unknown Source)
   at com.brio.one.client.ClientFactory.connect (Unknown Source)
   at com.brio.one.services.mgmt.logging.ServiceHandler.getBusinessService (Unknown Source)
And - when I run validate Essbase is 'clean', but when I try to connect via MaxL I get the same socket error as when I try via EAS.
Any thoughts on what these mean John?
thanks again,
Robert.

Similar Messages

Cannot add users to Calendar Server

Cannot add users to Calendar Server

You may get the following error when you try to add users to a new
installation of Calendar Server 3.0:

Could not bind as [nsCalXItemId=10000:00001, o=Ace Industry,c=US]. 
Create ObjectClass for user [cn=John Doe, o=Ace Industry, c=US]... failed.

This is an inconsistent problem that we are trying to duplicate on a
regular basis. There are a few solutions:

1) Create another node. This seems to work every time. 
2) Deinstall the Calendar Server completely and reinstall. Be VERY
careful of the Directory Server URL definition.

What printer model is it? I ask, because often manufacturers provide USB-only drivers for USB-only printers - for Macs, that is. In other words, if you know about CUPS from using Macs and linux, the manufacturers actually provide drivers with the comm protocol built-in, rather than make use of the USB "backend" available from CUPS. These are called "monolithic" drivers - they don't follow the unix/linux/CUPS concept of making use of already-provided modules.

Cannot add a New Essbase server into the EAS Console

Hi can someone assist me...........
I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

Hi can someone assist me...........
I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

Cannot add attendees to iCal Server on SL Server

Hi,
I try to narrow this problem down as much as I can. First off... the normal calendar function works fine, but adding attendees to events doesn't work anymore. The server isn't live yet, so nobody noticed the error until now and I have no idea what went wrong and when.
When I access the Wiki calendar the error happens as soon as I want to add attendees. It says something like "You don't have permission to view this calendar" in a popup.
Webserver log:
*<IP-address> - - [12/Dec/2009:13:38:26 +0100] "POST /calendars/_uids_/28DEB<...>D7C/outbox/ HTTP/1.1" 403 131*
iCal server access log:
*127.0.0.1 - <user> [12/Dec/2009:13:38:26 +0200] "POST /calendars/_uids_/28DE<...>D7C/outbox/ HTTP/1.1" 403 131 "https://<fqdn>/ical/" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X 1062; de-de) AppleWebKit/531.21.8 (KHTML, like Gecko) Version/4.0.4 Safari/531.21.10" i=8009 t=223.5 or=1 recipients=1*
In iCal I can add the other users, but they do not receive the invitations...
Funnily enough I created a new temporary user, who is able to send out invitations, but the other users aren't able to accept them (with similar errors).
I'm really at a loss, what I've messed up here... especially because it's only parts of the functionality that doesn't work.
Thanks,
Stefan

Well, the error manifests differently, but no, it doesn't work in iCal.app either.
Like I said, adding, changing, deleting events works fine, just adding attendees to the events gives me 403 errors.
That is true for the Calendar-Wiki as well as iCal app.

Cannot "Add" or "See" movies in my Library

Hi
Hope someone can help, I am trying to add movies to my Library, I can see it "Processing Files" when I drag them in, but not showing up at all.
Someone suggested I check under "Home Movies" but don't see an option for this or know how to find it? All I can see is the below, can anyone help please.
Only happened when updated to 12.0.1
Thanks

I have the entire original Star Trek series on the computer, all tested, watched and working fine. They are all MPEG-4 video files, and I can watch them on multiple computers and TVs when pulling directly from my network. They are labeled "Star Trek Episode 15 Shore Leave" and so on. Before I went out of town I loaded episodes 1-12 onto my iPad to watch while traveling. Again, they played fine. When I returned I had only watched the first three, so when I resynced my iPad I removed those three (episodes 1-3) and put on some other movies. Tonight when I went to watch them on the Apple TV I find that those three specific episodes are missing from the Apple TV list, so the ST episodes start with #4. Just kind of weird. These episodes are all the same version, done at the same time, the same way, no differences between them, even in size. Must can't figure out what is keeping them off of the list but it seems to be more than just coincidence that the three I notice missing are ones that I just removed from my iPad.
Also as to the iOS version you are correct, my typo, should be 10.7.5.
Thanks for the help and just to clarify I checked with one of my purchased movies as well as the manual ones and two do not show up, both again removed with the last sync. But they are still in the library! Can't figure it.
Andy

Cannot add printer to Linux server

I have a printer connected to a Linux box by USB. I can configure and print to it from Windows 8 (using \\IP-address\queue-name). I can't add it as an IP printer in Mavericks. I've tried IPP and LPD. In any case, I get the pop-up
Unable to verify the printer on your network.
Unable to connect to "192.168.0.4" due to an error.
When I proceed to create the printer anyway, printing hangs in the queue.
I've tried to find a solution by searching the Net. The only thing I can think that's different in my situation is that my MacBook is on a different subnet that the Linux box. Of course, I can access the Linux box over my home network using ssh. The network topology is such that my MacBook is on wireless going to a range extender which goes to the wireless router then to an ethernet switch that the Linux box is connected two. The two sides of the wireless router are on different subnets.
What can I check to get this going using the IP type? Or, can I configure it as a Windows printer (the Add printer dialog doesn't find the printer and I can't see how to manually add it using the address and name directly).
Thanks for your help.

What printer model is it? I ask, because often manufacturers provide USB-only drivers for USB-only printers - for Macs, that is. In other words, if you know about CUPS from using Macs and linux, the manufacturers actually provide drivers with the comm protocol built-in, rather than make use of the USB "backend" available from CUPS. These are called "monolithic" drivers - they don't follow the unix/linux/CUPS concept of making use of already-provided modules.

Cannot Add Essbase Server From Admin Services Consol

Hi
I am trying to add a new essbase server to my Admin Services list. I get the following error message:
Error: 1042006: Network error [145]: Unable to connect to [SERVERNAME:1423].
The client timed out waiting to connect to Analytic Services Agent using TCP/IP.
Check your network connections.
Also make sure that server and port values are correct
The essbase services are running on the other machine.. And I can communicate with the other box using FTP etc. So I think I need to get some ports opened between the source and target servers.
Can anyone please tell me what ports should I try to get opened. I read the documentation from help menu and it talks about some server.xml file and also says that you need to specift the port names unless they are something other than defaults. But I am not very clear about this.
Can anyone please help me to figure out what exactly is going wrong ?
Thanks
Mandar Joshi

Review the essbase.cfg on the server machine and look at the SERVERPORTBEGIN and SERVERPORTEND entries. You would want those entries as well as 1423 opened.
For default configurations ensure any firewall has the below ports opened from the client to the server:
TCP/1423
TCP/32768 through TCP/33768
Regards,
John

Cannot see essbase application in shared serivce after upgradation

hi i am trying to upgrade hyperion 11.1.2.1 to 11.1.2.3 with maintenance release . after the configuration with previous database and starting all the serives, when i loging to shared service i cannot see my application in essbase cluster 1 . i tried to register option in the essbase but it say registration is not allowed.

Is it just one application you cannot, can you see other ones from the previous release.
What happens if you create a new application
Check the essbase logs and the SharedServices_Security_Client log - Installation and Configuration Troubleshooting Guide
Cheers
John

Essbase 11.1.1.1.3 on Server 2003 SP2

Hi,
According to Oracle documentation they only support Hyperion Essbase, EAS, Shared Svcs etc... on Windows Server 2003 SP1. Does anyone know if there are issues with SP2 or if it works etc.. Or if the documentation I'm looking at is old and in fact SP2 is now supported?
Thanks.....

Hi There,
My PC has Essbase 11.1.1.3 installed on Windows Server 2003 SP2 platform. I didn't see any problems.
I think having higher SPs isn't a problem whereas having lower one would likely create issues, may be, right when you're installing the product!
- Natesh

Com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Error in connecting to Essbase server

Hi Experts,
I am trying to load metadata From Oracle to Essbase.In the Essbase data server, all credentails are correct. In the model, I am using OracleDIAgent(not local agent), Context Global, RKM Hyperion Essbase.
In the execution, Start the Reverse is failing and getting the below error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 58, in <module>
at com.hyperion.odi.essbase.ODIEssbaseConnection.connect(Unknown Source)
at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Error in connecting to Essbase server. Error message is : Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 58, in <module>
at com.hyperion.odi.essbase.ODIEssbaseConnection.connect(Unknown Source)
at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Thanks,
mady

Hi John,
Thanks for the reply.
Actually i have written big reply to u with explaining about the issue. But at the writing reply only, i got an idea to resolve this.
Now i am able to run the Model successfully.
Yes, you are correct. Due to invalid credentials only i am getting this error.
I want to ask you one thing. Actually, at the time configuration i gave password as a password, then my manager wants to change that password to Gxxx@123!
I have changed that password, it is working fine to connect workspace, easconsole and all.
But the issue i seen in creating DataSource(In planning), i am getting error with new password in the Essbase server datails. If i give old password(as password), it is working fine.
So, How can get that new password to work here??
In ODI also, it is the issue. When i am using New password it is not working. With Old password it is working fine.
Thanks,
mady

Com.essbase.eas.essbase.defs.ServerCommands.Connect - Session timeout

Hello,
I set essabse as a cluster on 2 win 2008 64 bit server (active, passive), EAS console runs on both servers as actvie active, we set a loadblanace infront of those 2 server to have EAS loadbalanced
if I do accsess EAS directly to the server http://<hostA>:10080/easconsole/console.html or http://<hostB>:10080/easconsole/console.html all works fine
As soon I am using domain name and go though loadbalance http://<domainname>:10080/easconsole/console.html I am getting the errror below:
com.essbase.eas.essbase.defs.ServerCommands.Connect February 12, 2013 2:56:51 PM EST Session timeout Failed : -1 Your session is not currently authenticated. Please log in.
EAS version: 11.1.2.2.1

Is it the web console, I take it you are using a http server such as OHS in front of the EAS WebLogic cluster, if so does it work through the http server or is still the same, how are sessions handled on the load balancer are they set up as sticky.
Cheers
John
http://john-goodwin.blogspot.com/

Unregister Essbase/EAS from Shared services

Hi Is it possible to unregister essbase, EAS from shared services? if so can some one please guide me unregister. we are on EPM 11.1.1.3
Thanks

Hi,
I've a similar issue with my customer.
In fact we have an an application with several databases and end users have read access on one, write acces on another and finally calculation accesses (but only on few calc scripts) on the last database.
SO, in shared security mode we can't reach all these requirements, beacause access are granted at the Essbase application level.
Therefore, the only solution I've found to put Essbase in stand-alone mode is to drop the essbase.sec file and recreate the essbase applications thanks to EAS or maxl commands.
For EAS I've found a topic on this forum, and the solution is to edit the olapadmin.properties file on the installation path of EAS server and to swith the value HUBProvisionEnabled=true at false.
You have to stop and start the services to do that but it works. And when started, you can use the EAS default login.
Edited by: Eric_M on May 2, 2011 6:02 AM

I have no more calendar synchronization with iCloud. when accessing to icloud account I cannot add an event on icloud calendar the message is :"server error"; any help?

I have no more calendar synchronization with iCloud. when accessing to icloud account I cannot add an event on icloud calendar the message is :"server error"; any help?

Tap the little claendar icon at the top left (next to the search icon) and see what calendars are set up in WeekCal. If none are enabled, then enable the one(s) you want to use.

I suddenly cannot add/edit users or groups!!! (Lion Server)

I suddenly cannot add/edit users or groups!!! (Lion Server)
On the latest Mac Mini Server Lion 10.7.2
Everything was working fine at first, I'm pretty sure either since i've upgraded to 10.7.2 or since we try to connect Windows8 to the server, Lion Server is not working to good anymore, from that time I cannot add/edit users or groups & assign any users to any goups, the + sign looks desable, and everything seems pretty glichy. The other thing I have notice is that a huge amount of Users & Groups has been added without my consent.
Do I have to ReInstall Lion Server??
Why do I have all these random Users & Groups listed? (see screenshot)

I had the same issue. I opened the Workgroup Manager application and noticed the message "not authenticated as diradmin to directory: /LDAPv3/127.0.0.1" was under the icon bar at the top of the popup screen. When I clicked on that bar I entered the diradmin username and my password. After I exited the authentication dialogue box the message now read "Authenticated as diradmin to directory: /LDAPv3/127.0.0.1."
At that point I had full privalages in both the Workgroup Manager and Server App to create users and groups.
Not sure if this why the problem occurred in the first place but at least I resolved it without any major problems.

I cannot connect to Oracle Essbase from SmartView

Hello.
When we open SmartView from Excel 2010 and connect to the Shared Connections with "admin" account, we cannot see "Oracle Essbase" option to select. This occurs in the developer environment. In production environment, we can select "Oracle Essbase" from the dropdown.
SIM env:
PROD env:
The installation was identically apparently.
How can we solve this problem?
Thanks a lot.

Hi ,
Could you check if Provider services is enabled in workspace settings.
Scroll down to last,
And try re-logging into workspace and then open an excel and see if you are able to see Essbase connection.
Make sure the user has admin access or make the changes through admin id.
Thanks
Amith

Essbase EAS Cannot Add or See Essbase Server

Similar Messages

Maybe you are looking for