Essbase Error(1200370) while executing business rule
Hi,
I am getting the error - Cannot calculate. Essbase Error(1200370): Error executing formula for [Average] (line 15): attempt to cross a null member in function [@X]
on executing the following script-
FIX(@RELATIVE("AltHierarchyProducts",0))
FIX("FY13","Draft1","Budget")
"Average"= @MEMBER(@CONCATENATE("P", @NAME (@PARENT(@CURRMBR ("Products")))))->"Variable" * (("Sales"->"Month1+ "Sales"->"Month2" +"Sales"->"Month3")/3);
ENDFIX
ENDFIX
"Variable" is an account dimension member. When I remove the '->"Variable"' part, the script executes, but obviously gives no result since the account member is missing.
I have read a lot of posts on this error but could not resolve this issue.
A basic view of the hierarchy is as under -
Products -
AltHierarchy
--Cat1
---Prod1
---Prod2
--Cat2
---Prod3
---Prod4
PCat1->"Variable" and Pcat2->"Variable" are the placeholders where the variable values are stored.
Please help.
Thanks.
Note: I am using Essbase 11.1.2.1
Is it possible that your @MEMBER function never actually returns anything. You have assumed that it works but perhaps it never works and it is only when you add the cross-dimensional operator that the issue becomes apparent.
e.g. If it is not working:
Without cross dim: "Average"= @MEMBER()* (("Sales"->"Month1+ "Sales"->"Month2" +"Sales"->"Month3")/3);
I'm not sure but perhaps the above will return something like #missing* (("Sales"->"Month1+ "Sales"->"Month2" +"Sales"->"Month3")/3)
With cross dim:
"Average"= @MEMBER()->"Variable" * (("Sales"->"Month1+ "Sales"->"Month2" +"Sales"->"Month3")/3);
Which I would assume would fail.
Do you see what I'm getting at? You could test that theory fairly easy.
Similar Messages
-
Error while executing business rule "Please increase CalcLockBlock setting"
Hello,
An error is occouring when I execute a particular business rule. The following message appears when I view the error from Job Console:
"Dynamic calc processor cannot allocate more than [100] blocks from the heap. Please increase CalcLockBlock setting and then retry"
No such error is occouring when I execute any other business rule.
Can anyone please tell me how to resolve it?
Regards,
Sa'adHi Sa'ad,
in the business rule your getting the error message is a calculation, where the result needs more than 100 blocks to access to.
The error comes from three possible causes:
1. Lockblock setting is low (essbase.cfg)
2. Your data cache setting is to small
3. Block size is to large
I think you have to increase data cache settings (by default 8192 KB) to.
Cheers
Uli
Edited by: Uli Drexelius on 13.07.2011 14:23 -
Error while executing the rule session
Hi, I am using Oracle Business Rules Engine 10.1.3.3.0.I am developing rules using XML Facts.I am using a complex type array schema and binding it to define XML facts.Earlier the depth of the schema is 1 and it worked fine,now our schema's depth is 2 and while binding this schema is also working fine.The sample structure of the present schema I am binding is
<xsd:schema>
<xsd:element name = 'ruleRepository' type = 'RuleRepositoryType'/>
<xsd:complexType name='RuleRepositoryType'>
<xsd:sequence>
<xsd:element ='ruleFacts' type='RuleFactsType' minOccurs='0' maxOccurs='unbounded'/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name='RuleFactsType'>
<xsd:sequence>
<xsd:element name='fact1' type='xsd:string'/>
<xsd:element name='fact2' type='xsd:string'/>
<xsd:element name='fact3' type='xsd:string'/>
<xsd:element name='fact4' type='Fact4' minOccurs='0' maxOccurs='unbounded'/>
<xsd:sequence/>
</xsd:complexType>
<xsd:complexType name='Fact4'>
<xsd:sequence>
<xsd:element name='element1' type='xsd:string'/>
<xsd:element name='element2' type='xsd:string'/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Earlier I have binded the similar schema as above but without 'fact4'.It went well and the rules were executing fine.
However when I am trying to bind a similar schema like the above one, its binding fine but when executing from the BPEL Process,its giving errors like,
"Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12",
Please note that I am using fact1 and fact2 only for defining the rules , I am niether using fact3 which is a simple type nor fact4 which is a complex type.
I have asserted Package.RuleRepositoryType in the definitions of the rule author.I have tried with different combinations of assertions but no one worked.
The above error(
"Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12") is coming for the first run of the decision service only,in the next runs its giving another error,which is like
<2008-04-10 07:52:30,772> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-36333
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Error while executing the rule session.
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> The rule session {0} failed to execute.
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:251)
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
<2008-04-10 07:52:30,801> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at java.lang.Thread.run(Thread.java:595)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> Caused by: java.lang.NullPointerException
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> ... 26 more
<2008-04-10 07:52:30,803> <ERROR> <oracle.bpel.services> <::>
java.lang.NullPointerException
at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
08/04/10 07:52:30 pFaultMessage is org.collaxa.thirdparty.apache.wsif.base.WSIFDefaultMessage@6e0e5f name:operationErroredFault
08/04/10 07:52:30 QName string is operationErroredFault
where 'BookOrderDecision' is the name of the decision service I am using in BPEL.
I dont understand why I am getting two errors for the same BPEL Process.
Kindly help me in this problem.I am stuck with this for about a week but could not get to the solution.
Thanks in advance.
Regards,
Venkat.Hi Venkat,
Whenever you do schema changes, you need to go through the cycle of
re-importing the XML schema in the rule repository, re-create the decision
service partnerlink, re-deploy the decision service.
I suspect you have maybe imported the entire XML fact type model (with fact3 and
fact4) instead of just fact1 and fact2 (might want to check in rule author).
So even if you don't use fact3 and fact4 in decision service, they are part of the rules
datamodel.
Regards,
Ralf -
Error while running Business Rules and Calc scripts
We are trying to run calc script in a report and we received the error saying that " An error occured while running the specified cacl script.Check the log for details", we received the similar error when working with Business rules.
This started when we tried to point JVMMODULELOCATION in essbase.cfg to null from its existing link to a java path.
This error persists even after we changed the config file to its original one.
Hyperion 9.3.1
Oracle 10g
Weblogic 9
Solaris 10 64 bit
john , please help. i will provide ytou with the exact error messages.. please tell me what this means ---> This started when we tried to point JVMMODULELOCATION in essbase.cfg to null from its existing link to a java path
what is that JVMMODULELOCATION for??
thankyou,
RcikyHi,
Here is details on what the JVMMODULELOCATION is :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/techref.htm
Cheers
John
http://john-goodwin.blogspot.com/ -
Error while migrating business rules
While trying to use the export/import option in EAS to migrate business rules, we have run into an error.
The export itself is fine. When trying to import, it says this:(even though it lets me select the proper xml file for importing)
Error while migrating business rules.
Detail: The import file specified is not a valid business rules xml file. Import will be terminated.
Detail:Exception occured. Please check your log file for details.
I am pretty sure I used the inherent format specified for exporting the business rules.
Both the old and new systems are version 11.1.2.
The LCM method also failed for the business rules migration.
Any suggetions?
Thanks,
SujaniWhen you export them make sure you don't have "For Calc Mgr" checked, if you do then the import with fail.
Cheers
John
http://john-goodwin.blogspot.com/ -
Rule Execution : Error while executing a rule session unit of work
Error while executing a rule session unit of work.
The rule session CreditRule:130002 failed to execute a unit of work.
Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
I have created a simple rule and using a decision service and a decide process activity I have tried to run the orchestration.
After compiling and saving and re-opening the orchestration flow looks correct.
When I execute the process I get the above error.
Is this something wrong with the Rule ?
Can anyone offer any advice
Thanks
CliffHi.
Any further advice on this issue?
Getting the same problem and cannot figure out a solution.
How do I check the "underlying exception" btw? -
Error while validating Business Rule (Error Cause: nativeGetNewTLA Rule)
Hi, I am receiving an error while validating business rules
An error occurred in: Rule:HypLive.Plan1.Product Interest
A validation error was received from the Planning server 'http://abc:8300/HyperionPlanning/servlet/HspAppManagerServlet?appname=HypLive'.
'Error:
Error Cause: nativeGetNewTLA Rule HypLive.Plan1.Product Interest'.Are you able to validate the rule in EAS (or Calc Manager)?
Normally nativeGetNewTLA Rule is followed by out of memory errors like java.lang.OutOfMemoryError,
Increase the heap size to 1024, re start Planning and try validating it again.
Cheers..!! -
Admin rights to validate/execute business rules
Hello everyone,
we set access priviliges and administration rights in shared services by assigning users to particular groups. We assigned two users to the administration group 'hypadmins' who now have access to all applications. In Essbase they can access applications, affect changes in the outline, validate the outline etc. However, they cannot validate or execute business rules (Error: Cannot connect to server). The problem does not persist when connecting to the server using a different (existing) admin user. The access priviliges for all rules are set to the admin group 'hypadmins' (and no other). Can anyone help with respect to identifying the source of the problem?
p.s. Can anyone explain what the Essbase Native Security Mode is?
Thanks in advance
Florian943380, I'm not picking on you, and I am glad you found an answer to your issue. My ire is saved for whoever thought that a blog equals copying knowledgebase articles from Oracle Support and sticking it on his blog. Why oh why oh why do I even bother paying support? And I suppose why oh why oh why do I kill myself writing blog content when I could just "borrow" it word for word from Oracle?
Regards,
Cameron Lackpour -
XL reporter error occurred while executing report! Rows: 25203 Columns: 30
An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.Hello pls
follow below procedure
start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
regards
Jenny -
Error:
Configure Portal Setup
An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
Errors in the Log:
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
Any ideas?
David BaurI finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
David Baur -
An unknown error occurred while executing the PowerShell script:
Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name: Microsoft-Windows-PowerShell/Operational
Source: Microsoft-Windows-PowerShell
Date: 4/9/2015 3:27:04 PM
Event ID: 4100
Task Category: Executing Pipeline
Level: Warning
Keywords: None
User: mmmmmm\paufra
Computer: tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
<EventID>4100</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>106</Task>
<Opcode>19</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
<EventRecordID>285</EventRecordID>
<Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
<Execution ProcessID="2344" ThreadID="4076" />
<Channel>Microsoft-Windows-PowerShell/Operational</Channel>
<Computer>tools-francis.mmmmmm.com</Computer>
<Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
<Data Name="ContextInfo"> Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
</Data>
<Data Name="UserData">
</Data>
<Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Receiving the error message while executing the Real Time DTP
Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
RamHi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all... -
[0098]SQL*Plus encountered oracle error 100 while executing SQL Statement
Hi,
i'm trying to delete duplicate records from a table and running following script. this script is triggered from a unix script. it successfully deletes the records but in the last throws following error message,
:[0098]SQL*Plus encountered oracle error 100 while executing SQL Statement:2:Investigation required:
can anybody please help? below is the script.
DECLARE
--CURSOR FOR DUPLICATE ROWS
CURSOR CUR_DUPLICATE_ROWS IS
Select RMS_NOTE_ID, RMS_SUMMARY_NOTE_ID, count(*) cnt from PARTY_NOTE
group by RMS_NOTE_ID,RMS_SUMMARY_NOTE_ID having count(*) > 1;
var_date PARTY_NOTE.PARTY_NOTE_CREATED_DATE%TYPE;
BEGIN
FOR DUPLICATE_ROWS_REC IN CUR_DUPLICATE_ROWS
LOOP
delete from party_note
where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID
and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID
and rowid not in (select max(rowid) from party_note
where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID);
commit;
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(SQLERRM);
ROLLBACK;
END;Try this:
delete party_note
where rowid not in (select max(rowid)
from party_note
group by rms_note_id, rms_summary_note_id
commit;No need for cursors and loops.
And when that's completed, consider ALTERing the table to add a unique index (or even a primary key) so you'll never need to do this again. -
I'm installing the SCSM2012 Management Server
component on a SQL dev box. During the installation, the very last step (Import Management Packs) fails with this error:
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
I've already verified that the account I'm logged in with has SA access to the SQL database. Windows 2008 R2 firewall is turned off.....
Has anybody else run into this problem?I don't see anything indicative in the setup log. The setup seems to get all the way to the part where it installs the management packs. Then right after that is when the installation fails and it rolls back.
From the setup log, towards the end:
Property(S): ACTIONSUSER = NETWORK SERVICE
Property(S): ACTIONSDOMAIN = NT AUTHORITY
Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
Property(S): ProductToBeRegistered = 1
MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
1603.
MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
=== Logging stopped: 11/7/2011 17:33:22 ===
MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/7/2011 17:33:23 === -
An error occurred while executing a custom action:_PopulateUserRoles
I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this rollAfter this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
These are the steps (I had to create the DWORD 32 bit):
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
On the Edit menu, point to
New, and then click DWORD Value.
Type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type 60000, and then click
OK.
This value represents the time in milliseconds before a service times out.
Restart the computer.
Hope this helps!
BR,
Robert
Robert
Maybe you are looking for
-
My wife and I both have Iphones and Ipads but seperate Icloud accounts. I would like to utilize the photostream capabilites of the icloud desktop client to view pictures on our home pc and back them up. Is there anyway to do this? will this be adde
-
Personal File Sharing with Fast User Switiching
I have 2 users set up on the iBook. I want file sharing turned on for only one of the users and off for the other. Both are logged in. Any way to do this? It appears that personal file sharing is either on or off for all users.
-
Logic Pro Midi Keyboard Randomly Stops
Hi, I am fairly new to Logic Pro 9 and music composition software in general. I have a Yamaha P85 keyboard that I am using with Logic. I use an E-MU midi 2x2 to hook it up to my computer (imac 2011). The keyboard has a midi in/out slots where I ha
-
One GRC connected to multiple R3
Hi Needed you expert opinion I am implementing GRC for a customer with 10 R3 systems We have to implement one instance of GRC connected to 10 R3 systems Each of these R3 belongs to a Business Unit ( 10 different business units in all) Each of this b
-
Hi! Gurus, We would like to add a new screen field to our shipment document. My ABAPper says there's no screen exit to do the same. He talks something about breaking the code and stuff like that which I dont understand much. Please let me know a way