Essbase excel plugin error - "essbase uniquyfyforuser failed to get.."

Hello Everyone,
I have Hyperion and Essbase Fusion Edition installed in the same machine. Whenever I open a new instance of excel, I get the Hyperion (Smart View) addin, but I do not get the Essbase Plugin. Instead I get the following error message:
"essbase uniquyfyforuser failed to get unique name size, code 1355"
Any suggestion would be of great help.
Thanks
Sayantan

Hi,
Try this KBase 1357924 (See below), it would help and eliminate one of the possible causes.
Symptom
SAP Netweaver BEx variables don't show up in BusinessObjects Xcelsius application during refresh
It is not possible to dynamically answer the query prompt differently
error: Failed to get the document information
Cause
A WebIntelligence query on an SAP data source - passing prompt values through a LiveOffice connection in Xcelsius 2008 - does not return any output.
The ability to query an SAP datasource from Xcelsius is currently not fully functionally supported.
Resolution
Additional support for BI variables will be delivered with Enhancement Request # ADAPT01178138:
Direct access from BOBJ Xcelsius Designer to SAP BW BEx queries, via a new SAP Menu and connectivity to BI Consumer Services
The new access type does not go via BusinessObjects Enterprise (so no QaaWS or LiveOffice involved), instead the SAP Embedded Analytics connector creates .SWF visualizations which are published back into NetWeaver to handle authentication & data fetch run.
Prerequisite system requirements:
SAP NW BW 7.0.1 SP5 (Sept 2009)
Xcelsius Designer 2008 SP2 (end July 2009)
BEx Front-end GUI Patch 9.01 (available)
Regards,
Ken

Similar Messages

Server 2012 errors for timeout -- LDAP error number: 55 -- LDAP error string: Timeout Failed to get server error string from LDAP connection

Hello, currently getting below error msg's utilizing software thru which LDAP is queried for discovering AD objects/path and resource enumeration and tracking.
Have ensured firewalls and port (389 ) relational to LDAP are not closed, thus causing hanging.
I see there was a write up on Svr 2003 ( https://support.microsoft.com/en-us/kb/315071 ) not sure if this is applicable, of if the "Ntdsutil.exe" arcitecture has changed much from Svr 03. Please advise.
-----------error msg ----------------
-- LDAP error number: 55
-- LDAP error string: Timeout Failed to get server error string from LDAP connection

The link you shared is still applicable. You can adjust your LDAP policy depending on your software requirements.
I would also recommend that you in touch with your software vendor to get more details about the software requirements.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Essbase Excel Plugin Errors/Warnings

Our company is in the process of packaging software and we recently received the package for the Essbase Excel Plugin today and ran into errors while testing it out. My thought process is that the file permissions on the Hyperion Solutions folder are incorrect and the user does not have/read access to this folder. Would file permissions cause the following errors (seen below)?
Error #1
Opening a wallet (C:\Hyperion Solutions\Middleware\EPMSysttem11R1\products\ExcelAddin;\products\ExcelAddin\bin\wallet) failed (28759).
Error #2
SSL Initialization failed with error code [1040132].
Thank you in advance for your help!

Hi Layi,
ERROR: Warning(1040156) - SSL initialization failed with error code [1040132]. (Doc ID 1340766.1)
Hope the above document is helpful!
The content is:
Applies to:
Hyperion Essbase - Version 11.1.2.1.000 and later
Generic Windows
Symptoms
Receives the Warning message when tried running MaxL statement:
Warning(1040132) - Opening a wallet(D:\Oracle\Middleware\user_projects\eem2\EssbaseServer\essbaseserver\bin\wallet) failed(28759)
Warning(1040156) - SSL initialization failed with error code [1040132].
Cause
One Of the following Environment Variables is not set:
ARBORPATH
ESSBASEPATH
ORACLE_INSTANCE
ORACLE_HOME
Solution
Make sure the following Paths are set in the Environment Variables:
Example:
ORACLE_HOME=C:\Oracle\Middleware\ohs
ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1
ARBORPATH=C:\Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1
ESSBASEPATH=C:\Oracle/Middleware/EPMSystem11R1/products/Essbase/EssbaseServer
Where "C" Is your installation Path.
In order to remove the warning message:
Copy from $ORACLE_INSTANCE\config\Opmn\opmn\wallet directory along with the cwallet.sso to the ARBORPATH\bin directory.

The HTTP Request is unauthorized with client authentication scheme negotiate - MDS Excel Plugin error

Hi,
Some users in my company are experiencing a strange issue when connecting to our MDS server using the MDS Excel plugin. They receive the error message:
"The HTTP Request is unauthorized with client authentication scheme negotiate. The authentication header received from the server was "NTLM,BASIC real="DOMAIN NAME IWA"
They are receiving this error when first trying to connect. For some reason they only receive this error when connected to the work network via the VPN. They don't receive this error from within our network.
Does anyone know what might be causing this issue and how to resolve?
Many Thanks,
Phil

Try the following links and see if it helps:
https://support.microsoft.com/en-us/kb/896861/
https://social.technet.microsoft.com/Forums/projectserver/en-US/912c7179-8858-4c48-a71d-d9a21ff10a1b/the-http-request-is-unauthorized-with-client-authentication-scheme-ntlm-the-authentication?forum=project2010custprog
-Nithesh Shetty Software Engineer, C & E -> IMML -> MDS, Microsoft.

Error pushing client "Failed to get DP locations as the expected version from MP...."

I am new at SCCM. installed 2012 R2 and SQL 2012 R2 on a single server. I created a boundary and a boundary group and ran discover on my AD. I am trying to push the client to a couple of discovered PCs. I resolved an issue with a
permissions error accessing the \admin$ share, but now I'm getting "Failed to get DP locations as the expected version from MP servername..."
I'm seeing this in the client ccmsetup.log
I've tried everything I can think of and still can't fix it. I have checked my DP and it was set to HTTP. Can anyone help offer some suggestions?
Thanks

The error means the expected version of Client Package cannot be got from DP. Please update Client Package from Package Node in SCCM Console, then observe the distmgr.log to make sure the updated pkg has been distributed to DP, then try again.
Juke Chou
TechNet Community Support

Failed to get procs for sound track -2126

What is the meaning of the error message of "Failed to get procs for sound track -2126"? I am attempting to convert a Quicktime movie file that uses Sorenson Video & QDesign Music 2 codecs.

Certainly someone must know the meaning for this error message. Is there a list of error messages for compressor and QT??

Failed to get pprocs for sound track -2126

What is the meaning of the error message of "Failed to get procs for sound track -2126"? I am attempting to convert a Quicktime movie file that uses Sorenson Video & QDesign Music 2 codecs.

You've got to give us a little bit more to go on.
What, exactly, are you doing? Converting your Sorenson Video 3-codec QT file in Compressor? What version of Compressor? What happens if you try this same thing in QT Pro?

REP-52284: Failed to get create resource URL from OiD.

Any one using SSO and Reports ever get this error message? I cannot find any relavant information on this error in the documentation ...
Any assistance appreciated

I'm getting the same error:
REP-52284: Failed to get create resource URL from OiD.
running the URL:
http://host:7778/reports/rwservlet?server=rep_new&report=test.rdf&destype=cache&desformat=html&ssoconn=rep
using several different oracle accounts. It seems like it just started happening. Like you, I haven't found any details on OTN or Metalink.
Doug

Client fails to install (push) Failed to get DP locations as the expected version from MP

On the client (ccmsetup.log) I am getting the error:
<![LOG[Failed to get DP locations as the expected version from MP ‘server.domain’. Error 0x87d00215]LOG]!><time="15:05:24.261+300" date="02-13-2013"
component="ccmsetup" context="" type="2" thread="3168" file="ccmsetup.cpp:10926">
<![LOG[MP ‘server.domain’ didn't return DP locations for client package with the expected version. Retrying in 30 minutes.]LOG]!><time="15:05:24.261+300"
date="02-13-2013" component="ccmsetup" context="" type="2" thread="3168" file="ccmsetup.cpp:10752">
On the server I noticed (MP_ Framework):
<![LOG[Policy request file doesn't exist.]LOG]!><time="15:21:51.468+300" date="02-13-2013" component="MpFramework" context=""
type="1" thread="4660" file="mpstartuptask.cpp:122">
I have a feeling the two errors are related but I’m not sure where to begin to troubleshoot.

Thanks for your reply, and yes I believe it is all set up as it needs to be, but obviously I'm missing something.
I will add this: the client will eventually install. I am still testing of course and each of the 2 clients I have pushed it out too has gotten this error but
I come back the next day and it has installed.

Worflow failed to get user profile for user

I have a workflow that sends an email to a user. In the workflow email, one line has the lookup [%User Profiles:Name%], with Return field "As String" of the list item Field "Account Name" with Value "Current Item:Created By".
This workflow works for everyone, except it Errors when one user creats an item in this list. The error is "Workflow failed to get user profile for user... System Account - An error has occurred in Workflow Name"
and more detailed error found in logs: "AutoStart Workflow: Microsoft.SharePoint.SPException: Recursive workflows are not permitted.     at Microsoft.SharePoint.Workflow.SPWorkflowAutostartEventReceiver.<>c__DisplayClass1.<AutoStartWorkflow>b__0(SPSite
superUserSite, SPWeb superUserWeb)
System.InvalidOperationException: Workflow failed to get user profile for user:domainName\username.     at Microsoft.Office.Workflow.Actions.UserProfileHelper.GetProfile(String propertyName, String user)     at Microsoft.Office.Workflow.Actions.ProfileHelperBase.GetProfileString(String
propertyName, String userOrOrganization)     at Microsoft.Office.Workflow.Actions.GetUserProfileActivity.Execute(ActivityExecutionContext context)     at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity,
ActivityExecutionContext executionContext)     at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)     at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime
workflowCoreRuntime)     at System.Workflow.Runtime.Scheduler.Run() "
When I run "get-addomain -identity [FQDN]", I noticed that our DNSRoot has a totally different name than our NetBIOSName, so I followed this article and made sure to set netbiosdomainnamesenabled to TRUE:
http://meandmysharepoint.blogspot.ca/2012/09/netbiosdomainnamesenabled-and.html
To give you an idea of our setup, our DNSRoot is "abc.domain.com" and our NetBIOSName is "TESTING"; 2 totally different names. When I run "get-addomain -identity [FQDN]", the Name field is: "abc" (just the first
part of the DNSRoot); therefore, when I look up this user's profile in Sharepoint Manage User Profiles, his account shows as "abc\username" when it should be "TESTING\username".
I did an IISReset, and I ran a Full Profile Sync. But the workflow still Errors for this user.
Any ideas how to fix this? Should I delete MySites and User Profile Service application and recreate them?
Any tips would be appreciated.
thanks!

Hi,
According to your description, my understanding is that the error occurred when sending an email to the user in workflow.
Did you delete the existing Connections before setting NetBiosDomainNamesEnabled?
If not, I recommend to delete and recreate your AD connections, then set NetBiosDomainNamesEnabled to true.
Or you can delete the original User Profile Service Application and create a new one, then set the NetBiosDomainNamesEnabled to true and start the User Profile Service Application
synchronization.
More reference:
http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Failed to get dispatch from IBrwsr2! PHTML is null!

Anyone figure out why this is happening? So frustrating: - (

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758

On starting Essbase, system throws error "CSS Initialization Fails"

Hi
I have been using the hyperion essbase in the past.
Today the someone removed the network cable connecting to the servers. I put them back but since then i am facing issue where i cannot connect to Essbase server.
I tried restarting the essbase server. On starting the server it first gives the warning:
log4j:WARN No appenders could be found for logger (com.hyperion.css.common.CSSLo
gger).
log4j:WARN Please initialize the log4j system properly.
But it continues and then prompts error
[Fri Mar 18 17:06:02 2011]Local/ESSBASE0///Error(1051429)
Essbase Product Existence Check Fails against the Shared Services Server with Er
ror [Unable to connect to Shared Services, make sure the Shared Services server
is running and try again.]
Fatal Error: CSS Initialization Fails
I checked the Shared Services service, and it is running fine. My environment is a distributed environment where shared services(foundation) are installed on different machine than Essbase server
Did anyone also face the problem... please help

Hi John
Thanks for the reply. I am able to login and navigate through HSS using the following URL: http://punitp165594d:28080/interop/
Following are the log entries in SharedServices_Security_Client.log when i tried to start the Essbase server:
*2011-03-21 13:20:48,803 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)*
*2011-03-21 13:20:48,819 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)*
*2011-03-21 13:20:48,819 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)*
*2011-03-21 13:20:48,819 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)*
*2011-03-21 13:20:48,865 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)*
*2011-03-21 13:20:52,176 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)*
*2011-03-21 13:20:53,535 INFO [main] Got hub location from Registry:http://<servername>:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)*
*2011-03-21 13:20:54,238 INFO [main] Got native directory location from Registry:<servername>:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)*
*2011-03-21 13:20:54,253 INFO [main] URL constructed out of values in Registry database:ldap://<servername>:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)*

Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials

Hello All,
I am getting following error, when trying to expand essbase from calculation manager, "Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials",
I am using EPM 11.1.2.1
Thanks
Yash

If you have moved the server to a new data center and an issue has started occurring then it could point to the change.
Are you able to log into essbase directly with Maxl using the same account?
If you run a registry report do you see any of the configuration with IPs instead of DNS/hostname
Cheers
John
http://john-goodwin.blogspot.com/

Does Essbase Excel Plugin 11 work fine with Microsoft Office 2013

Hi,
My Company is planning to Upgrade to Microsoft Office 2013. Does Essbase Excel Plugin 11 work fine with Microsoft Office 2013?
Thanks,
Shashi

Hi Shashi,
Below content is taken from oracle certification matrix.Microsoft office 2010,2008 supports the lastest version of 11.1.2.3.More info check with the oracle certification matrix.
Version Supported
Vendor
Certification Type
Version
Exceptions and Additional Information
11.1.2.3
Microsoft
Office Productivity Suite
Office 2007 (all SP levels included)
Office 2010 (all SP levels included)
1. MICROSOFT OFFICE IS REQUIRED FOR: Smart View and Offline Planning when used with Reporting and Analysis, Financial Management, and Planning. Microsoft Office is also required for Disclosure Management, FDM, Financial Reporting Client, Performance Management Architect File Generator, and Strategic Finance.
2. Offline Planning and Excel must be installed on the same machine.
3. Microsoft Office 2010 (32-bit Office on 32 or 64-bit operating systems, 64-bit Office on 64-bit operating systems)
4. EXCEPTION: Disclosure Management has installation prerequisites. For Office 2007. See http://support.microsoft.com/kb/970942.
5. EXCEPTION: FDM server only supports the 32 bit version of Office.

Essbase Connection Failed

Hi All,
While Creating Datasource in Planning 9.3 i m getting the message 'Essbase Connection Failed'. I checked the services of Essbase and Planning working fine. What could be the reasons for this error messages.
Please advice.

Hi,
Can you actually log into essbase using the account details you are putting into the config utility.
Have a look in the config logs to see if there is any further information.
Cheers
John
http://john-goodwin.blogspot.com/

Essbase excel plugin error - "essbase uniquyfyforuser failed to get.."

Similar Messages

Maybe you are looking for