Essbase Issue temp file location.

Is there a way to change the location where Essbase writes a temp file when data load(text file) is being done. It usually writes to Windows Temp location.
Also will Essbase writies similar temp file when data is loaded from sql too?
If anyone are familiar with this setting, please respond.
Appreciate any response.

Similar Messages

The 2 year old fix for changing temp files is no longer valid, I need to change the temp file location in the latest firefox.

In 3.6.3 I'm unable to find the parent cache to change where the temp files are located. I have an SSD drive, and I need to get the temp file off, and onto my platter drive. I have read the previous fix of about:config and changing the parent cache location, but it no longer seems to be there. I'm unable to locate anything relating to my SSD drive location in about:config.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4

Unfortunately, it appears that what I wrote about not being able to find the location IN about:config of the cache to change it from my C: drive to a different location, was mildly misunderstood that I didn't know how to get into about:config.
The location of browser.cache.disk.parent_directory does not currently exist in 3.6.3. I'm assuming it's under a different location. Also using the simple string of "cache" lists several options, but none of them appear to be where firefox is currently dumping the temp files onto my C:
I merely need to know how to switch the temp file location from 1 drive, to another. Not downloads, the temp file.

I have LR 4 and now I cannot open the software because I get this warning: light room cannot start because it cannot create files in the temp file location.. C:/windows/temp. How do I fix this? I have removed and downloaded LR and even used by disc and st

I have LR 4 and now I cannot open the software because I get this warning: "light room cannot start because it cannot create files in the temp file location. C:\windows\temp\". I think I need to have LR open in a different place but I have no idea how to do that. Any help is most appreciated.
Alex

Jim
Thank you for your prompt reply. Unfortunately I am not that tech oriented and
cannot easily find that folder. I did notice when I was booting up the LR software
that I could accept the site where LR usually is set up or choose a place. I am
thinking that the standard location for LR software is corrupted and that if I
chose a different place it would work. I say this because whether I use my
original disc or download from adobe I get the same warning. I have 100GB of
memory on the hard drive and I have cleaned the computer with Mcaffee and free
software. What should I do next? I can't use this software and I doubt LR 5
would open up with my current problem.
Alex

I Lost Power to my PC while in Acrobat Reader and lost data, where is temp file located?

I lost power to my pc while typing a new acrobat reader file but never saved it, where is the default temp file located, if this exists? Thanks.

The answer to your question depends upon your version of Reader and your OS. Especially since the last version of Acrobat Reader was version 5 which is four majors versions ago. The last four versions have been called Adobe Reader, not Acrobat Reader. This the forum for the Acrobat commericial product, not the free reader product.
PDF files cannot be edited in Reader and fields filled in with Reader cannot be saved (unless especially enabled) canot be re-opened from the temp files. To make a long story short. You will need to re-type the information.
Sorry to be the bearer of the sad news.

Reader XI temp file location

We are having an issue with our Term server users. Since moving to a server 2012 windows 8 environment we are unable to use the comment function in reader XI, as you can see it is completely greyed out. Have tested the same pdf file off of the server and on older term servers and comment section works fine. We believe this is a permissions issue with the location of the temp file opened when you open a pdf. We are unable to find said location and have spent hours on the forums today with no luck. Help please.

We are having an issue with our Term server users. Since moving to a server 2012 windows 8 environment we are unable to use the comment function in reader XI, as you can see it is completely greyed out. Have tested the same pdf file off of the server and on older term servers and comment section works fine. We believe this is a permissions issue with the location of the temp file opened when you open a pdf. We are unable to find said location and have spent hours on the forums today with no luck. Help please.

Project Manager Trimmed Temp File Location

Hello,
I recently tried to trim down a 100GB project. I had 8GB left on my harddrive, and the project manager said the final project would be 7GB, so I took the chance and started trimming.
Unfortunately, I ran out of diskspace during the trim, and the Project Manager aborted the action. Fair enough. However, when I checked my diskspace in finder, I only had 100MB free space. That means the temp file, that the project manager created while trimming the project, is still stored somewhere. But I have no idea where it is stored or what it is named.
I'm on a Mac 10.6.4, CS5.
Do you know where (or how) to look?
Thanks,

Where are your Scratch Disks located?
What was the Destination Folder, that you directed PrPro to archive your Project?
Note that performance of a HDD begins to decline at ~ 70% of capacity, and falls off sharply, as one fills the drive. It can also contribute to premature failure of the HDD. Sounds like it's time to get larger, or more HDD's.
Good luck,
Hunt

Groff / grops temp file location

I was bit by the sudo grace period bug. Because sudo has a brief grace period,
during which anyone can execute it without being prompted for a password, anyone
who makes it past the firewall can execute anything he wants if he knows when sudo
was last executed. One clever chap changed my root password on me.
I share this verbose background because I want others to be aware of this security hole.
Add these three lines to /etc/sudoers, which removes grace period and prints su activity
in a secure file (so no one knows when su or sudo is executed).
Defaults:ALL timestamp_timeout=0
Defaults:ALL !syslog
Defaults:ALL logfile=/var/log/secure.log
Now on to the question. Because I followed this inconvenience with a reset of all
permissions, I suddenly found that grops (the troff2ps postprocessor underlying
groff) no longer had permission to create temp files, rendering it defunct. I can
only run it successfully as root(!).
Because I cannot find the src for grops, I do not know where the temp files are
created. The man page's specification of /tmp/gropsXXXXX is incorrect. I need
to find that directory and liberalize the permissions.
Thank you.

Thank you for your interest in my other security issues. I was able to resecure root and the machine right away...
Great! Sorry I wasted your time with my post then. I must confess that I know pretty much nothing about groff/grops. But I didn't realize that you had simplified your post and weren't having further root problems.
That said, I hope the following isn't equally useless:
1. According to the groff man page:
<pre style="line-height: 50%; background: #eee">
GROFF_TMPDIR
The directory in which temporary files will be created. If this
is not set but the environment variable TMPDIR instead, tempo-
rary files will be created in the directory $TMPDIR. On MS-DOS
and Windows 32 platforms, the environment variables TMP and TEMP
(in that order) are searched also, after GROFF_TMPDIR and
TMPDIR. Otherwise, temporary files will be created in /tmp.
The refer(1), groffer(1), grohtml(1), and grops(1) commands use
temporary files.
</pre>
To my surprise, $TMPDIR is set to something seemingly obscure: /var/folders/XX/XXYYYYYYYYYYYYY/-Tmp-/ where XX is a random pair of characters and YYYYYYYYYYYYY is another random sequence of characters. This folder is owned by the currently logged-in user, and has permissions 0700! YMMV, but this, and the parent directories, may be worth investigating.
2. You may already know this, but just in case (or for anyone else who reads this), 0777 is the wrong permissions for tmp-like directories. The correct permissions is 01777, or drwxrwxrwt. The difference (the '1' in the 512-place) is the "sticky bit" and partially overrides the write-permissions to prevent users from deleting files that they don't own. This is a useful security measure: otherwise, say, an attacker could potentially attempt to exploit a race condition, and replace the temporary file which grops creates with a different file, before grops gets around to reading the temporary file which it created. (On the other hand, with the sticky bit set, a different security issue is created, namely, if the 'XXXXXX' part of the gropsXXXXXX filename is predictable--e.g. the PID of the grops process--then an attacker could try to create the gropsXXXXXX before grops gets a chance to, thereby effecting a DOS attack.) I would be surprised if the incorrect permissions would be an issue for you--why would groff/grops check the sticky bit on the temporary directory?--but it is still worth fixing, if necessary.

Default configuration issue - scratch file location (win7 64)

I have installed the public beta successfully, but the first attempt to run has failed: I got an error message stating that Photoshop does not have access rights for the scratch file or the scratch file is used by another application.
Not sure if this is common practice, but my installation requires administrator account to create files in the root directory of the system drive (Windows 7 ultimate 64 bit, SP1). I have managed to start CS6 by selecting "Run as Administrator" and then reconfigured it to create scratch file on a different drive. From then on all is good so far.
Suggested ways of handling this issue:
- make the location of the scratch file an installation parameter and test whether the file can be created
- provide the location of the file in the error message: as is, it requires a bit of guesswork which may be too much for the new users
Cheers,
Peter

i am unable to connect to DB2 Server....
Test Connection
Error: The database returned a value containing an error
Please find the logs as below.
sm21:
Database error -1337 at PRE access to table ZPRAMOD
> SQL1337N The service "db2c_db2inst1" was not found
wp:
Supported features:
..retrieving configuration parameters
..done
DB2 library successfully loaded DB2 library '/usr/sap/TOI/SYS/global/db6/SUNOS_64/db6_clidriver/lib/libdb2.so' successfully loade
Running with UTF-8 Unicode
Running with CLI driver.
ERROR in DB6Connect[dbdb6.c, 1786] CON = 1 (BEGIN)
&+     DbSlConnectDB6( SQLDriverConnect ): [IBM][CLI Driver] SQL1337N The service "db2c_db2inst1" was not found
&+
&+
&+     ABAP location info 'Y_TESTCON', 66
&+     SAP user 'XXXX', transaction code 'SE38'
&+
ERROR in DB6Connect[dbdb6.c, 1786] (END)
ERROR => DbSlConnect to 'axsser01' as 'db2inst1' failed
bdb6.c      1791]
***LOG BY4=> sql error -1337 performing PRE on table ZPRAMOD    [dbtran#5 @ 7598] [dbtran 7598 ]
***LOG BY0=> SQL1337N The service "db2c_db2inst1" was not found [dbtran#5 @ 7598] [dbtran 7598 ]
dbtran ERROR LOG (hdl_dbsl_error): DbSl 'PRE'
RSLT: {dbsl=99, tran=1}
FHDR: {tab='ZPRAMOD', fcode=53, mode=2, bpb=0, dbcnt=0, crsr=1,
        hold=0, keep=0, xfer=0, pkg=0, upto=1, init:b=0,
        init:p=(nil), init:#=26, wa:p=0xfffffffe7d0bffbc, wa:#=26}
ri Mar 18 19:53:43 2011
Deactivate ASTAT hyper index locking

3.1 Upgrade Issues - Referenced File Locations Broken

I have been through the 3.0.3 to 3.1 upgrade routine now four or five times without success. Each time, the process stalls after the upgrade, during the opening library routine. Eventually, I get an error, quit, and rebuild the library.
That effort gets the program to open, but now all of my referenced files (about 72,000 of them) have lost their connection. Each image has a badge with a red line through it, and when I right-click on it to 'show in finder' I get an error message that says it cannot locate the file, as the previous location is 'null'.
When I go through the locate and reconnect function, it will only work on one file at a time.
I've noticed on the reconnect dialogue, that it shows the correct location except for the .NEF at the end of the path.
Also, I have noticed that the adjustments are not grayed out as they would be for an offline file, and are operational. However, they do not work.
There does not appear to be any processing going on in the background, although there is slight activity showing in my OS Activity monitor.
My db is about 70gb in size. I tried the upgrade on another db, and it worked fine. That db is much smaller, so I am not sure that the problem is related to the size, or that my db may be damaged somehow prior to the upgrade.
Any help would be appreciated. This is getting pretty frustrating.

OK.....thanks for the advice. But, confirm for me, please....
1. Set aside 3.1 app (does that simply mean rename it temporarily)
2. Restore 3.0.3 app from Time Machine.
3. Restore 3.0.3 db from Time Machine.
4. Run Rebuild on db.
5. Run resulting db from 3.1 app and perform upgrade conversion.
That should take care of the rest of today....:-)

Importing mp3 library issue. File location still on DVD (E) Drive.

I am trying to import a rather large library from a mp3 DVD to iTunes. Yet when everything is done (I choose File/Add Folder to Library), the location of the file still points back to my DVD (E) drive. There is just too much music of this DVD for me to select File/Library/Import Playlist, as I only have the option of selecting an individual song rather than a complete folder.
What would be the most efficient way to import this mp3 library onto my hard drive so I don't have to have the mp3 in my E drive every time I want to play a song?
Thanks.

Chris, thank you also for your quick reply!
I did that on mistake, When I had hit reply, I didn't see your post, and thought I was giving Niel the star.
Message was edited by: kmhoffman

Can't set temp files folder or set cache size

I have a workstation that will not download files, or pick up the auto-proxy settings. Other workstations on the same network work fine, so it is not the user profile or proxy server/config. It happens to all users on this workstation, including the local
admin account.
I have reset IE settings, doesn;t fix. Downloaded and run 4 or five fix-it tools (I used Chrome or another PC to download). I have removed IE from the windows features and settings, rebooted, and added back. Windows update works, updated it to all latest
security patches. If I go to open the downloads folder, it does nothing (Tools-View Downloads), just drops back to the normal browse window. If I try and check/set the temp files, Tools->Options->Browse and click Settings, I see there is no current temp
file location (not even for the loacl admin). I try and set it (by moving) to C:\Users\admininstrator (%username%)\appdata\local\microsoft\windows\Temporary Internet Files\ it accepts, then asks me to log off. Log back on and it's not set. I try and set the
Disk space to use for cache as it is set to zero, and it will ONLY accept 8MB then when I click save (close or whatever), I go back and it is still 0MB.
I have run sfc /scannow, I have reset all user permissions on the Admin user folder.
Sooo00, I use Google Chrome and it works fine - picks up the autoproxy, downloads, opens the download folder. I've disabled all the add-ons. If I set the proxy to autodiscovery, IE hangs and does not disply anything. If I set the proxy script, it does not
work. If I manually set the proxy server and port, browsing is fine except it won't download files when you click on them to save, won't open pdf's.
This all used to work until sometime over Christmas.

Hi,
So we are using IE 11 here? And are we in a domain environment?
In addition, have we checked if this issue exists in
saft mode with networking.?
When doing the uninstallation, please first take a check to see if the previous version of IE could work with the settings mentioned above, after that, take a try to install IE 11 by manually download it from the below link:
Download Internet Explorer 11
Best regards
Michael Shao
TechNet Community Support

Reporting temp file

When I try to run a report, on some of them I receive an error stating that
the server don't have enough disk space disk space to create the report.
Is it normal that a temp file take over 8 Gb ?
Is it possible to redirect that temp file location ?
Thanks.

Normand,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Restore Elements 7 catalog into Elements 13 that was just installed on a new PC. The hard drive structures are different. I am trying to restore this to an empty drive and when the organizer opens it is having issues finding the location of all the photos

New PC. New solid sate OS and the new photo 1tb drive. the restore and convert seemed to go smoothly. all the photos loaded. the albums although are having issues finding file locations.@ !

You keep asking variants on this same question. You've had replies in all your other threads. If you can't find them, go here and click where it says Activity:
Thomas Cannon Jr.

Offline File Sync - Temp File Issues

I just set up Offline File Sync and I've noticed that temp files (created when saving a file) are in still showing in my local folder. When I try to open one of these files, it says that it doesn't exist on the network location.
It looks like the file is being created and then removed on the network but the local cache doesn't remove the copy properly. I've tried deleting the files as well as deleting temporary files via the Sync Center but neither work.
I'd like to solve this so that the file list doesn't become crazy full with many saves from Excel files.
Can someone please help?

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.  <o:p></o:p>
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
can also choose to unmark the answer as you wish.  <o:p></o:p>
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
problems.  <o:p></o:p>
Thanks!<o:p></o:p>
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

Essbase Issue temp file location.

Similar Messages

Maybe you are looking for