Essbase Maxcell script error

Hi,
I am trying to run a batch script to extract the data using report script.
my report script is working fine.
with the mxl script i am getting the following error.
All variables are set and report script is working. However I am not able to run successfully my batch script.
essSvr=hypdev-1, essUser=chyp-dev, essPswd=dddduuaa, essDBDir=\\brm-hypde
v-1\C$\Hyperion\AnalyticServices\app\appa1\appa1\, essDataPath=\\hypdev-
4\c$\Hyperion\Automations\DataFile\, essMxl=C:/Hyperion/Automations/Scripts/tbc.Mxl
Press any key to continue . . .
Press any key to continue . . .
InvChng to MCDB sunset Oracle data Extract Started! Mon 10/11/2010 11:52:38.57
C:\Hyperion\Automations\Scripts>essmsh C:\Hyperion\Automations\Scripts\tbc.
mxl
Essbase MaxL Shell - Release 9.3.1 (ESB9.3.1.0.0B181)
Copyright (c) 2000, 2007, Oracle and/or its affiliates.
All rights reserved.
ÿÿÿÿ> _
2> ÿÿÿÿ/ÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿ
ÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿ
ÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿ
ÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿ
ÿÿÿÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ/ÿ
3> ÿÿÿÿ/ÿ*ÿÿÿÿ ÿÿÿÿPÿÿÿÿrÿÿÿÿoÿÿÿÿcÿÿÿÿeÿÿÿÿdÿÿÿÿuÿÿÿÿrÿÿÿÿeÿÿÿÿ ÿÿÿÿtÿÿÿÿoÿÿ
ÿÿ ÿÿÿÿEÿÿÿÿxÿÿÿÿtÿÿÿÿrÿÿÿÿaÿÿÿÿcÿÿÿÿtÿÿÿÿ ÿÿÿÿtÿÿÿÿhÿÿÿÿeÿÿÿÿ ÿÿÿÿDÿÿÿÿaÿÿÿÿtÿÿ
ÿÿaÿÿÿÿ ÿÿÿÿfÿÿÿÿrÿÿÿÿoÿÿÿÿmÿÿÿÿ ÿÿÿÿIÿÿÿÿnÿÿÿÿvÿÿÿÿCÿÿÿÿhÿÿÿÿnÿÿÿÿgÿÿÿÿ.ÿÿÿÿIÿÿ
ÿÿÿÿÿÿÿvÿÿÿÿCÿÿÿÿhÿÿÿÿnÿÿÿÿgÿÿÿÿ ÿÿÿÿ*ÿÿÿÿ/ÿ
4> ÿÿÿÿ/ÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿ
ÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿ
ÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿ
ÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿ
ÿÿÿÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ*ÿÿÿÿ/ÿ
ÿÿÿÿ> ÿÿÿÿ
6> ÿÿÿÿ/ÿ*ÿÿÿÿ ÿÿÿÿCÿÿÿÿoÿÿÿÿnÿÿÿÿnÿÿÿÿeÿÿÿÿcÿÿÿÿtÿÿÿÿ ÿÿÿÿ-ÿÿÿÿ ÿÿÿÿnÿÿÿÿoÿÿ
ÿÿtÿÿÿÿeÿÿÿÿ ÿÿÿÿnÿÿÿÿoÿÿÿÿ ÿÿÿÿeÿÿÿÿrÿÿÿÿrÿÿÿÿoÿÿÿÿrÿÿÿÿ ÿÿÿÿcÿÿÿÿhÿÿÿÿeÿÿÿÿcÿÿ
ÿÿkÿÿÿÿiÿÿÿÿnÿÿÿÿgÿÿÿÿ ÿÿÿÿiÿÿÿÿsÿÿÿÿ ÿÿÿÿpÿÿÿÿoÿÿÿÿsÿÿÿÿsÿÿÿÿiÿÿÿÿbÿÿÿÿlÿÿÿÿeÿÿ
ÿÿ ÿÿÿÿoÿÿÿÿnÿÿÿÿ ÿÿÿÿtÿÿÿÿhÿÿÿÿeÿÿÿÿ ÿÿÿÿsÿÿÿÿhÿÿÿÿeÿÿÿÿlÿÿÿÿlÿÿÿÿ ÿÿÿÿcÿÿÿÿoÿÿ
ÿÿmÿÿÿÿmÿÿÿÿaÿÿÿÿnÿÿÿÿdÿÿÿÿsÿÿÿÿ,ÿÿÿÿ ÿÿÿÿsÿÿÿÿpÿÿÿÿoÿÿÿÿoÿÿÿÿlÿÿÿÿ ÿÿÿÿaÿÿÿÿfÿÿ
ÿÿtÿÿÿÿeÿÿÿÿrÿÿÿÿ ÿÿÿÿcÿÿÿÿoÿÿÿÿnÿÿÿÿnÿÿÿÿeÿÿÿÿcÿÿÿÿtÿÿÿÿ ÿÿÿÿtÿÿÿÿoÿÿÿÿ ÿÿÿÿhÿÿ
ÿÿÿÿÿÿÿdÿÿÿÿeÿÿÿÿ ÿÿÿÿpÿÿÿÿsÿÿÿÿwÿÿÿÿdÿÿÿÿ ÿÿÿÿ*ÿÿÿÿ/ÿ
7> ÿÿÿÿlÿÿÿÿoÿÿÿÿgÿÿÿÿiÿÿÿÿnÿÿÿÿ ÿÿÿÿ"ÿÿÿÿ$ÿÿÿÿeÿÿÿÿsÿÿÿÿsÿÿÿÿUÿÿÿÿsÿÿÿÿeÿÿÿÿ
rÿÿÿÿ"ÿÿÿÿ ÿÿÿÿ"ÿÿÿÿ$ÿÿÿÿeÿÿÿÿsÿÿÿÿsÿÿÿÿPÿÿÿÿsÿÿÿÿwÿÿÿÿdÿÿÿÿ"ÿÿÿÿ ÿÿÿÿoÿÿÿÿnÿÿÿÿ
ÿÿÿÿ"ÿÿÿÿ$ÿÿÿÿeÿÿÿÿsÿÿÿÿsÿÿÿÿSÿÿÿÿvÿÿÿÿrÿÿÿÿ"ÿÿÿÿ;
essmsh error: Variable doesn't exist - $ÿÿÿÿeÿÿÿÿsÿÿÿÿsÿÿÿÿUÿÿÿÿsÿÿÿÿeÿÿÿÿ
rÿÿÿÿ
essmsh error: Variable doesn't exist - $ÿÿÿÿeÿÿÿÿsÿÿÿÿsÿÿÿÿPÿÿÿÿsÿÿÿÿwÿÿÿÿ
dÿÿÿÿ
essmsh error: Variable doesn't exist - $ÿÿÿÿeÿÿÿÿsÿÿÿÿsÿÿÿÿSÿÿÿÿvÿÿÿÿrÿÿÿÿ
ÿÿÿÿ> ÿÿÿÿ
2> ÿÿÿÿsÿÿÿÿpÿÿÿÿoÿÿÿÿoÿÿÿÿlÿÿÿÿ ÿÿÿÿoÿÿÿÿnÿÿÿÿ ÿÿÿÿtÿÿÿÿoÿÿÿÿ ÿÿÿÿ"ÿÿÿÿ$ÿÿÿÿ
(ÿÿÿÿaÿÿÿÿLÿÿÿÿoÿÿÿÿgÿÿÿÿDÿÿÿÿiÿÿÿÿrÿÿÿÿ)ÿÿÿÿIÿÿÿÿnÿÿÿÿvÿÿÿÿCÿÿÿÿhÿÿÿÿnÿÿÿÿgÿÿÿÿ
2ÿÿÿÿMÿÿÿÿcÿÿÿÿdÿÿÿÿbÿÿÿÿsÿÿÿÿnÿÿÿÿsÿÿÿÿtÿÿÿÿ.ÿÿÿÿlÿÿÿÿoÿÿÿÿgÿÿÿÿ"ÿÿÿÿ;
essmsh error: Variable doesn't exist - $ÿÿÿÿ
A¿A¿A¿A¿ÿÿ
A¿A¿A¿A¿A¿A¿A¿
A¿A¿A¿A¿A¿A¿A¿
4> A¿A¿A¿A¿sA¿A¿A¿A¿eA¿A¿A¿A¿tA¿A¿A¿A¿ A¿A¿A¿A¿AA¿A¿A¿A¿pA¿A¿A¿A¿pA¿A¿A¿A¿NA¿
A¿A¿A¿aA¿A¿A¿A¿mA¿A¿A¿A¿eA¿A¿A¿A¿ A¿A¿A¿A¿=A¿A¿A¿A¿ A¿A¿A¿A¿'A¿A¿A¿A¿IA¿A¿A¿A¿nA
¿A¿A¿A¿vA¿A¿A¿A¿CA¿A¿A¿A¿hA¿A¿A¿A¿nA¿A¿A¿A¿gA¿A¿A¿A¿'A¿A¿A¿A¿;
A¿A¿A¿A¿smsh error: Parse error near
A¿A¿A¿A¿ÿÿ
2> A¿A¿A¿A¿sA¿A¿A¿A¿eA¿A¿A¿A¿tA¿A¿A¿A¿ A¿A¿A¿A¿CA¿A¿A¿A¿uA¿A¿A¿A¿bA¿A¿A¿A¿eA¿
A¿A¿A¿NA¿A¿A¿A¿aA¿A¿A¿A¿mA¿A¿A¿A¿eA¿A¿A¿A¿ A¿A¿A¿A¿=A¿A¿A¿A¿ A¿A¿A¿A¿'A¿A¿A¿A¿IA
¿A¿A¿A¿nA¿A¿A¿A¿vA¿A¿A¿A¿CA¿A¿A¿A¿hA¿A¿A¿A¿nA¿A¿A¿A¿gA¿A¿A¿A¿'A¿A¿A¿A¿;
A¿A¿A¿A¿smsh error: Parse error near
ÿÿÿÿ> ÿÿÿÿ
2> ÿÿÿÿEÿÿÿÿcÿÿÿÿhÿÿÿÿoÿÿÿÿ ÿÿÿÿ$ÿÿÿÿCÿÿÿÿuÿÿÿÿbÿÿÿÿeÿÿÿÿNÿÿÿÿaÿÿÿÿmÿÿÿÿeÿÿÿÿ
essmsh error: Variable doesn't exist - $ÿÿÿÿCÿÿÿÿuÿÿÿÿbÿÿÿÿeÿÿÿÿNÿÿÿÿaÿÿÿÿ
mÿÿÿÿeÿÿÿÿ
ÿÿÿÿ> ÿÿÿÿ
ÿÿÿÿ> ÿÿÿÿ
3> ÿÿÿÿ/ÿ*ÿÿÿÿEÿÿÿÿxÿÿÿÿpÿÿÿÿoÿÿÿÿrÿÿÿÿtÿÿÿÿ ÿÿÿÿOÿÿÿÿEÿÿÿÿMÿÿÿÿ ÿÿÿÿIÿÿÿÿnÿÿ
ÿÿvÿÿÿÿeÿÿÿÿnÿÿÿÿtÿÿÿÿoÿÿÿÿrÿÿÿÿyÿÿÿÿ ÿÿÿÿcÿÿÿÿhÿÿÿÿaÿÿÿÿnÿÿÿÿgÿÿÿÿeÿÿÿÿ ÿÿÿÿdÿÿ
ÿÿÿÿÿÿÿtÿÿÿÿaÿÿÿÿ ÿÿÿÿ*ÿÿÿÿ/ÿ
ÿÿÿÿ> ÿÿÿÿ
5> ÿÿÿÿeÿÿÿÿcÿÿÿÿhÿÿÿÿoÿÿÿÿ ÿÿÿÿ'ÿÿÿÿEÿÿÿÿxÿÿÿÿpÿÿÿÿoÿÿÿÿrÿÿÿÿtÿÿÿÿIÿÿÿÿnÿÿÿÿ
gÿÿÿÿ:ÿÿÿÿ ÿÿÿÿOÿÿÿÿEÿÿÿÿMÿÿÿÿ ÿÿÿÿiÿÿÿÿnÿÿÿÿvÿÿÿÿeÿÿÿÿnÿÿÿÿtÿÿÿÿoÿÿÿÿrÿÿÿÿyÿÿÿÿ
ÿÿÿÿcÿÿÿÿhÿÿÿÿaÿÿÿÿnÿÿÿÿgÿÿÿÿeÿÿÿÿ ÿÿÿÿfÿÿÿÿrÿÿÿÿoÿÿÿÿmÿÿÿÿ'ÿÿÿÿ ÿÿÿÿ$ÿÿÿÿCÿÿÿÿ
uÿÿÿÿbÿÿÿÿeÿÿÿÿNÿÿÿÿaÿÿÿÿmÿÿÿÿeÿÿÿÿ;
essmsh error: Variable doesn't exist - $ÿÿÿÿCÿÿÿÿuÿÿÿÿbÿÿÿÿeÿÿÿÿNÿÿÿÿaÿÿÿÿ
mÿÿÿÿeÿÿÿÿ
ÿÿÿÿ> ÿÿÿÿ
ÿÿÿÿ> ÿÿÿÿ
ÿÿÿÿ> ÿÿÿÿ
4> ÿÿÿÿeÿÿÿÿxÿÿÿÿpÿÿÿÿoÿÿÿÿrÿÿÿÿtÿÿÿÿ ÿÿÿÿdÿÿÿÿaÿÿÿÿtÿÿÿÿaÿÿÿÿbÿÿÿÿaÿÿÿÿsÿÿÿÿ
eÿÿÿÿ ÿÿÿÿ$ÿÿÿÿAÿÿÿÿpÿÿÿÿpÿÿÿÿNÿÿÿÿaÿÿÿÿmÿÿÿÿeÿÿÿÿ.ÿÿÿÿ$ÿÿÿÿCÿÿÿÿuÿÿÿÿbÿÿÿÿeÿÿÿÿ
Nÿÿÿÿaÿÿÿÿmÿÿÿÿeÿÿÿÿ ÿÿÿÿuÿÿÿÿsÿÿÿÿiÿÿÿÿnÿÿÿÿgÿÿÿÿ ÿÿÿÿrÿÿÿÿeÿÿÿÿpÿÿÿÿoÿÿÿÿrÿÿÿÿ
tÿÿÿÿ_ÿÿÿÿfÿÿÿÿiÿÿÿÿlÿÿÿÿeÿÿÿÿ ÿÿÿÿ"ÿÿÿÿ'ÿÿÿÿ$ÿÿÿÿ(ÿÿÿÿeÿÿÿÿsÿÿÿÿsÿÿÿÿDÿÿÿÿBÿÿÿÿ
Dÿÿÿÿiÿÿÿÿrÿÿÿÿ)ÿÿÿÿMÿÿÿÿcÿÿÿÿdÿÿÿÿbÿÿÿÿsÿÿÿÿnÿÿÿÿxÿÿÿÿtÿÿÿÿ.ÿÿÿÿrÿÿÿÿeÿÿÿÿpÿÿÿÿ
'ÿÿÿÿ"ÿÿÿÿ ÿÿÿÿtÿÿÿÿoÿÿÿÿ ÿÿÿÿdÿÿÿÿaÿÿÿÿtÿÿÿÿaÿÿÿÿ_ÿÿÿÿfÿÿÿÿiÿÿÿÿlÿÿÿÿeÿÿÿÿ ÿÿÿÿ
"ÿÿÿÿ'ÿÿÿÿ$ÿÿÿÿ(ÿÿÿÿeÿÿÿÿsÿÿÿÿsÿÿÿÿDÿÿÿÿaÿÿÿÿtÿÿÿÿaÿÿÿÿPÿÿÿÿaÿÿÿÿtÿÿÿÿhÿÿÿÿ)ÿÿÿÿ
IÿÿÿÿNÿÿÿÿVÿÿÿÿ_ÿÿÿÿSÿÿÿÿUÿÿÿÿNÿÿÿÿSÿÿÿÿEÿÿÿÿTÿÿÿÿ.ÿÿÿÿtÿÿÿÿxÿÿÿÿtÿÿÿÿ'ÿÿÿÿ"ÿÿÿÿ
essmsh error: Variable doesn't exist - $ÿÿÿÿAÿÿÿÿpÿÿÿÿpÿÿÿÿNÿÿÿÿaÿÿÿÿmÿÿÿÿ
eÿÿÿÿ
essmsh error: Variable doesn't exist - $ÿÿÿÿCÿÿÿÿuÿÿÿÿbÿÿÿÿeÿÿÿÿNÿÿÿÿaÿÿÿÿ
mÿÿÿÿeÿÿÿÿ
essmsh error: Variable doesn't exist - $ÿÿÿÿ
essmsh error: Variable doesn't exist - $ÿÿÿÿ
ÿÿÿÿ> ÿÿÿÿ
ÿÿÿÿ> ÿÿÿÿ
ÿÿÿÿ> ÿÿÿÿ
ÿÿÿÿ> ÿÿÿÿ
5> ÿÿÿÿeÿÿÿÿcÿÿÿÿhÿÿÿÿoÿÿÿÿ ÿÿÿÿ'ÿÿÿÿEÿÿÿÿnÿÿÿÿdÿÿÿÿ ÿÿÿÿoÿÿÿÿfÿÿÿÿ ÿÿÿÿEÿÿÿÿ
xÿÿÿÿpÿÿÿÿoÿÿÿÿrÿÿÿÿtÿÿÿÿ:ÿÿÿÿ ÿÿÿÿOÿÿÿÿEÿÿÿÿMÿÿÿÿ ÿÿÿÿiÿÿÿÿnÿÿÿÿvÿÿÿÿeÿÿÿÿnÿÿÿÿ
tÿÿÿÿoÿÿÿÿrÿÿÿÿyÿÿÿÿ ÿÿÿÿcÿÿÿÿhÿÿÿÿaÿÿÿÿnÿÿÿÿgÿÿÿÿeÿÿÿÿ ÿÿÿÿfÿÿÿÿrÿÿÿÿoÿÿÿÿmÿÿÿÿ
'ÿÿÿÿ ÿÿÿÿ$ÿÿÿÿCÿÿÿÿuÿÿÿÿbÿÿÿÿeÿÿÿÿNÿÿÿÿaÿÿÿÿmÿÿÿÿeÿÿÿÿ;
essmsh error: Variable doesn't exist - $ÿÿÿÿCÿÿÿÿuÿÿÿÿbÿÿÿÿeÿÿÿÿNÿÿÿÿaÿÿÿÿ
mÿÿÿÿeÿÿÿÿ
A¿A¿A¿A¿ÿÿ
A¿A¿A¿A¿A¿A¿A¿
A¿A¿A¿A¿A¿A¿A¿
4> A¿A¿A¿A¿lA¿A¿A¿A¿oA¿A¿A¿A¿gA¿A¿A¿A¿oA¿A¿A¿A¿uA¿A¿A¿A¿tA¿A¿A¿A¿;
A¿A¿A¿A¿smsh error: Parse error near
A¿A¿A¿A¿ÿÿ
A¿A¿A¿A¿A¿A¿A¿
3> A¿A¿A¿A¿eA¿A¿A¿A¿xA¿A¿A¿A¿iA¿A¿A¿A¿tA¿A¿A¿A¿;
A¿A¿A¿A¿smsh error: Parse error near
ÿÿÿÿ> ÿÿÿÿ
2> ÿÿÿÿ
essmsh error: End of File breaks the statement
MaxL Shell completed
Press any key to continue . . .

Hi,
I think it would be easier if you segregate the MaxL commands from the UNIX parameters, I mean if you push all the maxl executable lines into .msh file and execute that .msh file at the end if the Unix Shell then you might not get this error.
Also you can try the same command into the Essbase client's Maxl editor that way you can check your syntax and variables. Once it is working fine there then you can embed this maxl into the shell.
--XAT

Similar Messages

Error executing essbase report script using maxl

Hi,
V 11.1.2.1 (64 bit) on windows
An essbase report script errors when it is run from maxl. When I run it directly in maxl the error is
Error - 1030205 - Client directory does not exisit: ...EssbaserServer\<instance>\client
When I run it within EAS the error is
Client directory does not exisit: EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0client
Unexpected essbase error 1030205
The client is installed but the folder locations do not exist. There is a calc script which does a data export which works fine. The essbase report can be manually executed without a problem. This worked fine in 9.3.1.
Here is the script (without actual names)
export database 'app'.'database' using report_file 'AReport' to data_file 'c:\\Output.txt';
I would appreciate any help. I have looked at the knowledge base and can't find anything relevant.
Thanks in advance,
Nathan
I would appreciate

Hi,
The issue is now resolved.
The client folder must be created where the EAS service is, not Essbase. Once this was done the report script could not be found. In discussion over the phone with Oracle we did some testing, as they use a non distributed environment. If you use 'using report file' you need to specify the path to the report file i.e.
D:\Oracle\Middleware\user_projects\epmsystem\EssbaseServer\<instance>\app\<app name>\<database>\report.rep'
The .rep must also be included.
If you use 'using server report file' you only need to specify the report name, without the extension, and the data file path. You specify the path as normal i.e. D:\nathan.txt but you can get away with simply a file name such as 'nathan.txt'. In a distributed environment this exports to the server where the EAS service is to
<drive>:\Oracle\Middleware\user_projects\domains\EPMSystem
When Oracle support did this it went to the Essbase bin folder as it was a non distributable environment.
The subtle differences between 9.3.1 and 11.1.2.1......
Thanks to all those who contributed.
Nathan

Essbase Internal logic error

Hi,
In one our job, after loading the data files we are running a calc on the database. But we got the following error. We are Essbase 6.5.1. This is a daily job where we load the data files & calc the database & in the past didn't run into any issues.
Can someone help me understanding what went wrong here?
[Sun Mar 01 22:17:59 2009]Local/Objectiv///Info(1008108)
Essbase Internal Logic Error [7421]
[Sun Mar 01 22:17:59 2009]Local/Objectiv///Info(1008106)
Exception error log [D:\ESSBASE\app\Objectiv\log00003.xcp] is being created...
[Sun Mar 01 22:18:00 2009]Local/Objectiv///Info(1008107)
Exception error log completed -- please contact technical support and provide them with this file
[Sun Mar 01 22:18:00 2009]Local/Objectiv///Info(1002089)
RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING
Appreciate your help
Vamsi

The exception file means that Essbase had a problem and basically the application crashed. Have you tried to see if the application will restart? If so, you might want to try to rerun your process, sometimes it's an intermittent thing. If not, look at the log in more detail and see what it was doing when it failed. Data load, calc script, etc to see it you can narrow down what it was doing.

IE Script error when double clicking on a view in Abap Webdynpro component

Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
Bhupendra

Hi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy

When I try to use the print/save as pdf option, I get a scripting error and Firefox usually freezes.

On my MacBook Pro running OS 10.5.8 and Firefox 3.6.13, I am trying to save documents as pdfs under the print window, I get a scripting error and Firefox usually freezes/becomes nonresponsive. This happens every time I tried to perform this task.

This is a fresh install of Windows 7. It is installed on virtual environment on my mac mini using the parallels virtualization application.
I purchased the windows version of dream weaver CS 6 through an online website which I tried to install to my new windows instance. This is the academic version of the Dreamweaver application with a perpetual license that I am trying to install.
I verified my eligibility through adobe which gave me a link to download the CreateiveCloud Set-up program. I downloaded the install program in my windows environment and program and the gave the above error message. Below is a copy of my computers specs.

Firefox is slow to open and close. I get a "script error" that says it may be caused by a recently opened tab. What do I do to correct this problem. It is wreaking havoc when trying to open/close or move around the internet.

I am getting a "script error" when I close out the internet, specifically Firefox. My backup internet explorer does not do this. This is slowing down the process of opening/closing Firefox. When I open Mozilla, I get "restore session" even though I have closed everything down. I have "removed program" and re-downloaded Mozilla 3 times and still this problem persists. What is causing it and how do I fix it?

-> Update All your Firefox Plugins
* https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
* Restart Firefox
Check and tell if its working.

Running reports in SCCM: ActiveX Script Error

When I try to run some reports, I authenticate then it throws a Script Error. Error: ActiveX component can't create object: 'Microsoft.XMLDOM'.
This only happens on some reports and it only happens remotely. If I try to run the same reports on the local server, there aren't any issues.

Have enabled remote errors?
http://be.enhansoft.com/post/2013/01/16/Enabling-Remote-Errors-in-SQL.aspx
What exactly is the error that your are getting!
http://www.enhansoft.com/

Firefox 4.0 is my default browser, and I am receiving a script error message when I try to view online images in Family Tree Maker 2011, a genealogy program. Have not had problems until Firefox 4.0. Can't seem to find a setting in Firefox to fix this.

Error is as follows: Line: 63 Char: 4344 Error: Unable to get value of the property 'offsetHeight': object is null or undefined Code: 0 URL: http://yui.yahooapis.com/combo?2.8.0/build/yuiloader-dom- event/yuiloader-dom-event.js&2.8.0/build/dragdrop/dragdrop- min.js&2.8.0/build/stylesheet/stylesheet- Do you want to continue running scripts on this page? Y/N buttons."

I see. Well, I just tried to make IE my default browser, but it did not solve the problem. I receive the same script error when I view the image. (I may not have explained this thoroughly enough at first - I do get to view the image after answering the error message, but the print button embedded in the window doesn't work. Before, I never had a problem with viewing or printing.)
I imagine that at this point I will either need to communicate this to the IE people, or possibly revert to an older version of IE.

I can't get Firefox to open on my computer. I've been using it for a year and a half with no problems until now. I keep getting the following "Unresponsive script" error message: Script: resource:///components/nsHandlerService.js:432 How do I fix this?

Unresponsive script error message keeps popping up, Firefox will not open.

Try to delete the mimeTypes.rdf file in the Firefox Profile Folder.
* http://kb.mozillazine.org/mimeTypes.rdf
* http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

Still having a problem with Firefox going to "restart a session" even after re-installing Firefox. Keeps giving me "script error" when closing down. How do I fix this?

As stated previously...I have removed and re-installed Firefox, but am still getting "script error" when shutting it down and going to "restore session" when opening. Please advise what to do about this problem. Thank you.

Firefox 21 and Firefox 22 running on Windows 7 have been reported to take a long time to "wake up" from sleep. I realize hibernation is different than sleep, but... this is the closest match for your description.
Some users have reported that this problem is resolved in Firefox 23 (currently in beta). Others have had inconsistent luck with minimizing Firefox before letting Windows sleep and other measures.
Please check out this (very long) thread for more information: [https://support.mozilla.org/questions/961898 browser freezes after resuming from sleep]
Or jump to the part about Firefox 23: https://support.mozilla.org/questions/961898?page=3#answer-457321
The fact that this just started recently suggests perhaps it is related to another program or update, but I don't think anyone has confirmed the exact interaction that causes the problem.

When I click on firefox I get a java script error that says "TypeError: Components.classes[TvtPwmComponent_CID] is undefined", what does that mean?

Whenever I click on firefox, or when a pop-up occurs, I get a java script error that says, "TypeError: Components.classes[TvtPwmComponent_CID] is undefined". I don't know why. It first occurred while I was on ESPN while trying to watch college games live.

This issue can be caused by an extension that isn't working properly.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Script Error when I try to Preview a report

Dear Experts, I have this issue when I try do a open a report by clicking Preview in CMC, I get a parameter screen where I have to plug the values. When I try to click on the calendar icon to pick up the dates I get this error message:
Internet Explorer Script Error
Line: 251
Char: 1
Error: Object expected
URL: .... prompting1.html
I imported the same report in the test server and I can select the calendar dates on the parameter screen just fine.
I'm on BOXI R2, Windows Server 2003.
I followed the instruction of un-checking the and checking the "Disable Script Debugging" in Internet Options Advanced tab. That did not help. I also made sure that the preferences in CMC has "ActiveX" under Crystal Report Viewer.
Kindly help me fix this issue.
Edited by: SAPman on Nov 9, 2009 12:36 PM

>
Sebastian Wiefett wrote:
> Hi,
>
> this looks for me as an error from the IE.
>
> Try to delete your Cache please. Is the URL of your BO Server in your Trusted Sites list ?
>
> Regards
> -Seb.
I too feel it is something with IE itself. I can open the calendar on the parameter screen after I migrated the report in the test environment with IE7.0. My dev system has IE6.0 and I was unable open the calendar. So I thought maybe it is the version. But when I open the dev CMC on my workstation (with IE7.0), I still was unable to open the calendar in the parameter screen. So that rules out IE version.
URL is also listed under Trusted sites. Moreover, if I type the dates manually, then report works fine too. But if I click on the calendar icon to select the dates, then I get this error.
Any help is appreciated.

Very Slow and Script Errors

Contribute 6.5 is very slow to publish new content to our site www.mrii.ie, even bringing up a page for editing is slow. So far I have:
Tested the the FTP settings using passive and active connections.
Using an external FTP program, downloading from the site is very quick 2. I checked all the file permissions on the server and they are correct. In fact Contribute will publish the changes eventually, just very slowly prior to the actual upload which seems pretty quick.
I also used a plain page with a small amount of text and again the pre-processing seems slow.
I removed the temporary sites and configuration folders and still no change.
I created a new connection.
As an aside, how do I disable script errors in the Contribute browser window?

OK, found it. This fixed my performance issue.
https://discussions.apple.com/thread/2536941
This fixed my Genius issue:
Turned Genius off
Closed iTunes
Launch Safari
Preferences/Security/Cookies
delete the apple.com entries

How to set up internet explorer notification script error on Imac

Trying to set up script error notification on my Imac when using internet explorer pages - where / how do I set this up for my Imac?

IE has not been supported by Microsoft on a Mac for years.... I have no clue what you are trying to do.
Barry

Script error: wdp_edit_on is Null, URL: ieframe.dll/dnserrordiagoff_webOC

Hello,
I like to train myself in ABAP webdynpro, so I have installed NW 7.02 SP6 EhP2 on a virtual machine (VMware) with Win2008R2.
I have applied with SICF all services as mentioned in OSS note 1088717 describing a list of /default_host/sap/bc/webdynpro/... etc.. as well as some services specificly around view designer.
Furthermore, the file "hosts" is set as follows:
192.168.8.128    dummy.com
192.168.8.128    PALATINVIRT1         PALATINVIRT1.dummy.com
10.10.0.10       PALATINVIRT1         PALATINVIRT1.dummy.com
whereas PALATINVIRT1 is the name of my host installed with Win2008R2 and NW 7.02..
Finally, ping tests are successfully for:
palatinvirt1
palatinvirt1.dummy.com
dummy.com
All of them are replying with 192.168.8.128.
Instance parameter icm/host_name_full is set to "palatinvirt1.dummy.com" (checked via transaction RZ10).
If I launch SE80, select "Web dynpro components" in order to check my view , I can open the view and click on tab "Layout" but I'm not able to see the generated HTML page as well as I don't see any UI element toolbar if I'm switching in edit mode. Instead, I will get a script error "The value of property " wdp_edit_on" is Null" and then "URL: res://iframe.dll/dnserrordiagoff_web_OC.htm".
If I check some activated services, especially the tutorial webdynpro applications (I have activated them in SICF), I will get a typical error "Web page cannot be displayed". So, it looks like a generic error I have.
Does anyone know which setting I have to check?

Hello to All,
I have found the reason for the error: resolution of my URL was not possible.
If you get such errors, this does not have anything to do with service pack updates or so or ICF services.
If you are driving a scenario virtual machine VMware with NW02 installed as well as SAPGUI installed on your physical PC (host PC) and you have no DNS server running on your host, then you have to define a mapping of your VM IP address to the FQDN.
I also have installed the Microsoft Loopback adapter, assigned to IP address 10.10.0.10 on my VM.
In my case, palatinvirt1.dummy.com is the FQDN.
Therefore, on VM the file HOSTS in directory c:\windows\system32\drivers\etc should contain:
192.168.8.128      dummy.com
192.168.8.128      palatinvirt1      palatinvirt1.dummy.com
10.10.0.10         dummy.com
This will enable each kind of requests via WAS.
On your host PC, it is also required to define a correct mapping for the palatinvirt1.dummy.com address, otherwise your host does not know where to look at.
So, modify on your host PC the file HOSTS in directory c:\windows\system32\drivers\etc:
192.168.8.128      palatinvirt1.dummy.com
This solved my problem.
I also recommend to fix the IP address on your VM and not to use DHCP service on top, otherwise you are risking of getting different IP addresses next time you are starting new your VM.
Yours
Stephan

Essbase Maxcell script error

Similar Messages

Maybe you are looking for