Essbase Maxl - Log out users

Hello All,
we have the following Maxl Script that is supposed to log out all users and prepare for the new load
alter system logout session all;
however the commande does seem to be working. If the user is already logded in it fails to log them out and terminate thier session.
Any idea why is this happening? any suggestion on how to kill all session and logout all users

Correction i meant
: however the command does NOT seem to be working
Hello All,
we have the following Maxl Script that is supposed to log out all users and prepare for the new load
alter system logout session all;
however the command does NOT seem to be working. If the user is already logded in it fails to log them out and terminate thier session.
Any idea why is this happening? any suggestion on how to kill all sessions and logout all users

Similar Messages

  • Urjent:Partition error:Logging out user [Admin], active for 0 minutes

    Hi all,
    Iam using 11
    Wen iam creating Transaparent partition its validating successfully , but wen iam saving it its giving error , partition creation failed
    Error: 1051037: Logging out user [Admin], active for 0 minutes
    and it s giving error reading ddb file
    i tried with maxl also but it continiously running for 30 mints , its horrible , actually it takes 2 mints
    how can i resolve this issue, any help would be appriciated
    thanks
    Edited by: user8815661 on 26 avr. 2010 05:18
    Edited by: user8815661 on 27 avr. 2010 04:00
    Edited by: user8815661 on 3 mai 2010 04:18

    Sounds like there is some sort of ddb file corruption. There are many causes, but the quickest fix I have found is usually a file-based deletion of the ddb file on both the source and target side of this partition. The attempt to create a partition on this database will cause a new ddb file to be created. Of course, this is dangerous. You can't have any other partitions on either the source or target side...or they will be deleted by this step. But the only purpose of the ddb file is for partition definitions, and it exists on both source and target.
    I've found this happens if one side of a partition (one of the ddbs from source or target) gets the file deleted, or communication is down between the source database server and target database server.

  • Adobe Flash Player 15.0.0.16 on Win 8.1 64bit ES logs out user at the end of Youtube film

    Dear Players.
    My Adobe Flash Player 15.0.0.167 on Win 8.1 64bit ES (Spanish) in IE11 logs out user at the end of Youtube film. In Event viewer there is apparently no error information. I use Fujitsu Siemens Lifebook S6410, where on Windows Vista 32 bit and IE9 with current Flash there was no problem on Youtube films.
    I have a feeling that initially after installing Windows 8 and 8.1 the films of Youtube finished correctly showing a mosaic of proposed next films. Now when the film ends, and the mosaic of the proposals should appear, the user is logged out.
    I did all the Adobe recommendations, and it does not help. Yet the problem is only with Youtube for the moment. All other Flash content on other pages shows ok.
    Any suggested solution?
    Kind regards
    Marcin Balcerzyk, Seville, Spain.

    Hello,
    Microsoft has been changing how they identify IE in the UserAgent string in IE11 (and in more recent versions of IE10). This has been occurring over various releases and it's not new to the latest updates.  As you see, sometimes they identify as Netscape/Mozilla instead of IE.  You can Google 'Microsoft User-agent string' the search will return various MSDN articles on this topic.  Long story short, most websites use OS/browser version in the user-agent string to display content for that particular combination, however, Microsoft wants content developers to use feature detection, not browser detection.  Compatibility view will work because Microsoft will change the user-agent string properties to something prior to the changes they've made.  By doing this, Microsoft leaves it up to the content developer to update their site.  Some have, some have not.
    Maria

  • Logging out Users authenticated thru a Directory service froma web app

    I would like to know how to log out users authenticated thru a Glassfish web server to a Directory service can be logged out and their associated session ended on the web app. My application logs in users successfully but it been problematic logging them out. each time i use the Session.Invalidate method and i navigate backward with the browser button, a new session is created and the getPrincipalUser is still available to the page. I would appreciate contributions. thxs.

    it says address already in use.
    another process is using port 7101: java.net.BindException: Address already in use: JVM_Bind.> go to taks manager.. kill any java.exe process and try again.. it should work..

  • Log out users

    Hi,
    Il would like to log out users by Abap program.
    I find an function TH_DELETE_USER. But sometimes, it takes a long time to really log out, or more it does not work .....
    do you have another function to do this ?
    Thanks
    Vince

    Even if you want to do this in a BW you should post this in the ABAP section. But I did not find any other services that could help you on this topic. Maybe one of the ABAP/administration people in the ABAP forum can help you here.
    Best regards
       Dirk

  • Log out user after an inactive period

    I am using DW CS3 and a MySQL database.
    Is there any way I can automatically log out a user if they have been inactive for a period of time?
    The reason I am asking, is that I have been testing my latest site and even if I close all windows in a browser (not quitting the browser) and then go to history, I can still get to protected pages. This could maybe a potential problem if users never quit their browser, they could still be logged in after days of inactivity.
    This is about my 5th site I have created using ADDT. The more I use the more I find it capable of. But this has me stumped.
    Any help would be appreciated.
    PM

    Hi Paul,
    checking a user´s inactivity could mean checking if his/her session still runs of if it´s expired by now -- whenever you apply a "Restrict access to Page" behaviour to whatever page, this behaviour will not just check things like user levels etc, but also if the session is still running.
    As this behaviour also cares for a redirection to your login page, I think you should apply this to every page which needs this kind of protection.
    Cheers,
    Günter Schenk
    Adobe Community Expert, Dreamweaver

  • Logging out users

    We have set up individual users on our iMac, since I have installed Snow Leopard I find it does not go to the login screen when a user logs out, infact I have to manual shut down my Mac and restart it to get back in. It seems to hang up. any suggestions??

    We have also set up individual accounts on our iMac, with parental controls on some. Logging out takes over 1 minute, with transition to screensaver followed by a new login screen more than 1 minute later. Did not happen before upgrading to SL. Any suggestions other than reloading the OS?

  • Airtunes Stops, Mac Logs Out User

    When using Airtunes (over Airport Extreme to Airport Express then through stereo system), everything works great for 45 minutes or an hour, and then suddenly stops. When I go to the Mac to see what's happening, I've been logged out automatically.
    I would normally think that it's because the computer is set to go to sleep after X minutes of inactivity, except that (1) it's not really inactive as long as music is playing, and (2) any other time the computer goes to sleep due to inactivity, the user is not logged out.
    Is this in fact due to the sleep setting, or is something else going on? Thanks.

    When using Airtunes (over Airport Extreme to Airport Express then through stereo system), everything works great for 45 minutes or an hour, and then suddenly stops. When I go to the Mac to see what's happening, I've been logged out automatically.
    I would normally think that it's because the computer is set to go to sleep after X minutes of inactivity, except that (1) it's not really inactive as long as music is playing, and (2) any other time the computer goes to sleep due to inactivity, the user is not logged out.
    Is this in fact due to the sleep setting, or is something else going on? Thanks.

  • Terminal Command to Log Out User

    I have Fast User Switching enabled. I would like to log users out that forgot to log out. What are the Terminal commands to log out someone named Alice who is a Standard user in OS X.3.9? I'm getting tired of having to restart to shut down the users account. Will the commands be the same for an Administrators account?
    Thanks for your help,
    G4 Quicksilver Dual 1 GHz, 1.5 GB RAM, Sonnet ATA133 card, Maxtor ATA133 drives   Mac OS X (10.3.9)   B+W G3 450 MHz, OS 9.2.2, 1 GB RAM

    If you're the Admin, then you should be able to use Terminal as root to log someone out like this:
    sudo killall -u [username]
    This should kill all processes in that user account, and it may log them out also (I can't test this on a single user machine). If it doesn't, you can use:
    sudo shutdown now
    which will log out everyone and shutdown the system to single-user mode for the root/Admin user.
    Hope this helps,
    Mulder
    If my answer helped solve your problem, please consider awarding some points. Why Reward Points?
    iMac G4 700Mhz   Mac OS X (10.3.9)  

  • Gracefully logging out user from the session

    Hi,
              I have seen this issue coming up in my current project and last project. If there is a certain window in which the server is scheduled to be bounced as part of regular maintance, what is the best way of gracefully shutting down the existing users and not letting new user come in.
              My thinking is more on the lines of defining a filter. This filter once knows that it is time to bring the server down, will not let new user come in and will turn on a flag that every jsps check to see whether to display the message(that server is going to come down in a litte while) or not
              Any ideas, feedback??

    Hi NIgel,
    Thanks for your response. I've made those changes and I think it has made an improvement, but I'm still experiencing the same issue.
    Something I have noticed is that each time I log back into the room, there's an extra line of
    #FMSConnector# Mon Jun 14 19:42:16 GMT+0100 2010 mainNetStatusHandler: NetStream.Connect.Success
    is added to the debug trace in the dev environment. So on the second time I enter, it prints the line 3 times, and on the third entry, its printed 4 times etc....
    I assume this is not supposed to happen, and usually by the 5th login, one of the clients has crashed. I seems logical to me that all the NetStreams are not being closed.
    Does this point to something I'm doing wrong? Is there anyway to get more description from the LCCS SDK code?
    Thanks again,
    Mark

  • Log Out Behavior - Users appear to stay logged in

    I cannot get a user to logout using the Log Out User
    behavior. I created a restricted page which displays the user's
    name once logged in, however when the user logs out and a different
    user id is used, the restricted page returns the first user's id. I
    cannot get the first user cleared. Thought it might be cookies but
    not sure. I'm using DW CS4's built in behaviors (no hand coding),
    MySQL 5.1.11, and PHP 5.2.9-1. Any ideas

    David I'll try to clarify.
    I've built 1 test MySql database, and 3 test pages
    (login.php, login_failure.php, and authorized.php).
    database: 6 fields (recordID, userFirstName, userLastName,
    userID, userPW, userAccess). userAccess values were 1 and 0, now
    are admin and user. admin is the allowed value in this case.
    Records in MySql InnoDB:
    recordID: 1 (Primary Key)
    userFirstName: User1
    userLastName: User1 Last
    userID: user1 (Indexed)
    userPW: user
    userAccess: admin
    recordID: 2 (Primary Key)
    userFirstName: User2
    userLastName: User2 Last
    userID: user2 (Indexed)
    userPW: user
    userAccess: admin
    login.php: Has one behavior, Log In User with Restrict access
    based on User, password and access level which is derived from
    userAccess field in database. If successful, user goes to
    authorized.php, if not, user goes to login_failure.php.
    login_failure.php: No SB, simply presents user with message
    that they are not authorized for access and a link to return to
    login.php.
    authorized.php: 4 SBs. Restrict Access to Page(), Recordset
    (Recordset1), Dynamic Text (Recordset1.userFirstName), and Log Out
    User. This page allows userAccess value "admin" from database and
    presents user with text Welcome (Recordset1.userFirstName). There
    is also the Log Out User link to log out.
    Steps to recreate:
    Set both userIDs userAccess to "admin" to allow access to
    authorized.php
    Login to login.php using userID "user1" and password "user"
    Take me to authorized.php, with "Welcome User1" displayed
    Click Logout
    Login to login.php using userID "user2" and password "user"
    Take me to authorized.php, with "Welcome User1" displayed
    (note: supposed to be Welcome User2)
    Click Logout
    Change userAccess for userID "user1" to something other than
    "admin"
    Login to login.php using userID "user1" and password "user"
    Takes me to login_failure.php as expected
    Return to login.php via link
    Login to login.php using userID "user2" and password "user"
    (which is now the only auth user)
    Take me to authorized.php, with "Welcome User1" displayed
    (note: supposed to be Welcome User2)
    Click Logout
    The security part works as seen above. I just don't
    understand why the authorization.php page always shows the first
    record in the DB. That's why I was assuming that the Log Out User
    function was not working.
    Steve

  • Logging out portal user programitically? (JSP)

    I am trying to log out users using a JSP. Here is a snippet of
    code calling the wwsec_app_priv package. I am not having any
    luck with this. Any suggestions?
    Thanks,
    Tom Henricksen
    CallableStatement logout = null;
    logout = con.prepareCall ("begin if wwctx_api.is_logged_on
    then wwsec_app_priv.logout(p_done_url=>?); end if; end;");
    logout.setString(1,logout_url);
    logout.execute();
    logout.close();

    The syntax you have works within our current web page (PSP
    page), but we have never tried it directly with PL/SQL.
    One thing you might want to look at is that "normally" (from a
    web page) the URL is called via the portal30 DAD:
    /pls/portal30/PORTAL30.wwsec_app_priv.logout?p_done_url=
    http%3A%2F%wherever.com
    Could it be that this works if PORTAL30 is running the package,
    and not the actual user? Just a wag. --Kate                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Logging out all users

    To perform a back-up I want to log out all users. Currently I use the 'unloadapp' ESSCMD, but this does not seem to log out users who are currently retrieving data. As a result my back-up fails.Does the 'logoutallusers' command log of all users (active, inactive)?Regards,JG

    Howdy!We do this via script for each application using the following essmsh syntax:"alter application appname disable connects;"This works great. We then re-establish any connections that we killed with the following statement:"alter application appname enable connects;"Hope this helps!JR

  • All animation freezes after Log Out used

    I've searched and searched and cannot locate another issue similar to this...wondering if someone could offer advice. After I took the iTunes 7, Front Row, and QuickTime updates recently, my dock animation, menu animations, etc freezes after using Log Out feature and switching to a different account. When I log into another account (or log back out and into my main account), all animation is gone with the Dock, menus, etc. I have to re-boot in order to get animation back. What is weird, is that it appears to just be animation. Functionally, I can still click on items in the dock or menu bar and have them do what they should. Just no animation. Not even the blue highlight as I move down over menu items. I have repaired permissions with nothing out of the ordinary. Any other ideas for me? Thanks in advance.
    PS: I do not have fast user switching turned on. I always use log out user when needed.

    Just one bump here for the weekend. Anyone else encountered this or can offer suggestions? Thanks.

  • Can't Log Out, Shut Down, or Restart after 10.5.2 update

    Since updating I've been unable to log out any user, though I can switch between users via fast user switching. Selecting Restart, Shut Down, or Log Out [User] makes any active windows become inactive, but does nothing else. (The same happens selecting restart from the system prefs or an updater/installer.) After the 10.5.2 update I had a major kernel panic that locked-up the whole machine and had to hard shut down. I've had several mini-panics since then, but the machine operates normally otherwise. I did a thorough Apple Hardware test and everything passed. None of the utilities I ran could find any issues. I am able to Restart and Shut Down via the Login Window (under the fast user switching menu). I have to enter an Admin account override, so I'm not sure if this is causing any system damage. I'm very frustrated with my very new computer. Any help or insights would be greatly appreciated.

    This is then not a permissions issue with your existing accounts since it is system wide.
    Your hope is that if you run Disk Utility Repair Disk Permissions would fix and Apple Installer installed files (the main system) permissions. Also do a Verify Disk to check for any underlying directory corruption. The safe boot means the issue is not extensions or fonts. There could still be a plugin somewhere screwing things up but it is unlikely.
    If repairing the system file permissions and downloading and re-applying the 10.5.2 combo update does not resolve the issue you have corrupt files in the system and need to reinstall the system.
    There is one more potential source and that is what are known as page faults. These originate with cache files which can't be loaded back as expected. This is a conflict issue and could be the source of the problem.
    You can manually dump the root and system cache but a better alternative is probably to download a program like Yasu. It is configurable, has a simple interface and will repair permissions and clean the cache.

Maybe you are looking for