Essbase reports from the .sec file

Hi,I have an essbase app/database which has multiple filters. The security on the users are based on the filter setup on the user for this app/db. I want to be able to create a report which shows the app/database name, user id, filter setup on the userid, date when this was setup, date updated. Is there any possible way to get this? Currently I am on version 6.5.4? Does the 7.1 have any features that will allow this?ThanksAnde

I've used MAXL extensively to assist in managing security. There are a number of commands that are applicable; most notably display filter, display group, and display privilege.MAXL runs on 6.5.4 and is a lot more functional than Esscmd in system administration. You might want to play around with it a bit. If you have 6.5.4 AppMgr on your box, you have MAXL; extesnsive on-line help is available.

Similar Messages

Report "General Ledger from the Document File" - Cumulative balance

Hi!
When I start the report "General Ledger from the Document File" (transaction S_ALR_87100205), I get a list of documents with no obvious default sort order criteria (I can see at glance that document numbers and posting dates are not sort criteria). This makes the cumulative balance column completely useles.
Since the cumulative balance is carried from one row to another, standard sorting functionality for the already produced list makes no sense.
There should be a way to affect the sort order in program <b>before</b> cumulative balance calculation, or at least to find it out.
Is there a way to acomplish this?
Thanks!
Regards,
Igor

In the output control section there is a button called configure. Select a variant. Select configure. Save the sort order and report definition the way you want it. Name a new variant. Now go back and run the report with your variant.
pls assign points if helpful as a way to say thanks.

Any way to generate trace report from the TKPROF formatted trace file?

As titled.
Is there any automatically way to make a report on SQL tuning report from the TKPROF formatted trace file(or from the dynamic performance views)
Paul

Dave,
That's what report queries are for, take a look at shared components. Walk through the create report query wizard, and on the final page, you'll get a URL that you can use to integrate this with your page. You'll find the same URL when editing your report query afterwards.
Alternatively, suppose you already have you report page, but don't want to always go there, you can just copy that report region print link (reference my answer to your previous question), and make that the target of a branch or from another page.
Regards,
Marc

Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-John

I think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed".

Executing the report from the form

I am getting the following error while executing a report from the form, and the destination format is excel
RWRBE60.exe - Application Error
The exception unknown software exception (0xc00000fd) occurred in the application at location 0x64aa591a.
Click on OK to terminate the program
Click on CANCEL to debug the program
OK Cancel

im having same problem when i use long report file names. like when i use report name my_very_long_long_report_name.rep this problem occurs..
i reduced this to my_short_report_name.rep it never occurs, it happend in lot of reports.
Regards

How to print out multilingual reports from the main report using Xliff temp

Hi all,
How to print out multilingual reports from the main report using Xliff temp?
When I want main report call subtemplate and finish xliff tranlation
<?for-each@section:INVOICE?><?end for-each?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if trx_number = 142 call Finnish translation and if trx_number =144,
call English translation.
<?for-each@section:INVOICE?><?end for-each?>
<?if:TRX_NUMBER=’142’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
<?if: TRX_NUMBER=’144’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Does anybody know what could be wrong?
BR
Kari

Thanks Amit,
I have two layout, main-layout and sub-layout
Main layout call subtemplate
I have registered layout and xliff-file
Main template
Localized Templates
File Name           Language Territory
XXNS_INVOICE_MAIN.rtf      English
SUB template
Localized Templates
File Name           Language Territory
XXNS_INVOICE_SUB.rtf      English
Translatable Template
File Name           Language      Territory
XXNS_INVOICE_SUB.rtf      English      United States
Available Translations
Language Territory Progress
English Finland Complete
If main report call subtemplate and finish xliff tranlation
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
.....end if;
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
.....end if;
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Do you it's set up problem or program problem
BR
Kari

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

Error message by periodic weekly: No output from the 1 file processed

Hi there,
since four weeks, I got a problem with the maintenance script periodic weekly. Up to December 22nd, the script did, what it should do: rebuilding the database of locate and whatis, rotating log-files. Since one week later, I got the error message: No output from the 1 file processed.
Normally, I use Anacron to do the job. When I noticed the problem, I tried to start the script with Tinker Tool System getting the same result. Another try using the Terminal (sudo periodic weekly) also failed. The commands locate and whatis are working, locate.updatedb and makewhatis also. I'm running 10.4.8; in the past, I did not have such problems. Anyone with an idea or solution?
Thanks
Klaus
MacBook Pro Mac OS X (10.4.8)

Hi Gary,
here is the output you were asking for:
Last login: Thu Jan 25 20:03:55 on console
Welcome to Darwin!
DeepThought:~ dirk$ sudo /private/etc/periodic/weekly/500.weekly; echo $?
Password:
Sorry, try again.
Password:
Rebuilding locate database:
Rebuilding whatis database:
find: /usr/local/man: No such file or directory
makewhatis: /usr/share/man/man1/fetchmailconf.1.gz: No such file or directory
Rotating log files: ftp.log lpr.log mail.log netinfo.log ipfw.log ppp.log secure.log
access_log error_log
Running weekly.local:
Rotating psync log files:/etc/weekly.local: line 17: syntax error near unexpected token `)'
/etc/weekly.local: line 17: `if [ -f /var/run/syslog.pid ]; then kill -HUP 0 80 79 81 0cat /var/run/syslog.pid | head -1); fi'
2
DeepThought:~ dirk$ ls -loe /private/etc/periodic/weekly/500.weekly
-r-xr-xr-x 1 root wheel - 2532 Jan 13 2006 /private/etc/periodic/weekly/500.weekly
DeepThought:~ dirk$
It seems, Rogers idea, PsynX respectively the deficient uninstalling by me is responsible for my problems, is correct. Should I remove the whole file weekly.local or should I only remove the content? I prefer removing the whole file, because it was created while installing PsyncX. The date of creation is the same as the date of installing the app (December 25).
Klaus
By the way: it seems to me, the solution of my problem is in sight. So I want to thank you all for the amazing aid I got from you!

Schedule a Webi report from the CMC

Hi, ALL
Is there a way to schedule a Webi report from the CMC without using an email account in the
'from' box? There are other placeholders that can be used but I don't know how
to use them please advise.
Thanks.

Hermant,
You need to make sure you configure the proper email server. Go to the CMC - Server > AdaptiveJobServer>Destination>Email. You may need to enable Email as one of the Destinations.
You must configure all the HIGHLIGHTED options.
Regards,
Ajay

How to run a BI-Publisher report from the Appworx enterprise batch sheduler

We have a BI-Publisher report that needs to be executed staight after a batch job. Does anyone know how to execute a report from the Appworx enterprise batch scheduler?
Thanks.

I'm not familiar with AppWorx, but we use Autosys. We created a PL/SQL wrapper that calls FND_REQUEST.ADD_LAYOUT and FND_REQUEST.SUBMIT_REQUEST to submit XDOREPPB. For any report that needs to be scheduled via Autosys, the wrapper program is executed with the appropriate parameters.
Hope this helps.

I want to fill the rows of the report from the loop

I want to fill the rows of the report from the loop
For example, in forms
cursor bdl is select code,decode(:global.user_lang,1,name,2,latin_name) name
from GL_ANALYSISHDR
begin
     go_block('bdls');
     clear_block;
     first_record;
     for rec in bdl loop
     :bdls.code:=rec.code;
     :bdls.name:=rec.name;
     next_record;
     end loop;
     go_block('bdls');
     first_record;
end;
I tried to use the REF CURSOR
But it return the values in one time and does not allow me to conduct and control of

Why do you need to do it by a curesor loop? Can't you put the query in the datamodel of the report and simply pass the parameter to restrict the query?

Problem while calling a report from the report

Hi
i want call a report from the report, i have written URL in the Hyperlink and its working
but
1) i want open it in the diffrent window.
2) suppose if u have a report called emp it should call antoher 2 report at a time.
( how to put 2 URL in the hyperlink?).
i,e if i press a hyperlink it should open emp1 and emp2
Please help me.
thanks and regards

Thanx,
I have solved this problem.
Regards,
Hafeez

Is there any way to move loads of mails from the "sent" file to trash, or does it have to be one by one ?

Mail .
I want to delete multiple mails ( not simply a thread of mails , but a larger selection) from the "Sent " file , but it looks like you can only do it one at a time .....is that correct , or am I missing something ?
Message was edited by: alanfromroggwil

I Have had the same problem I have not figured out how to check multiples at once, I know once they are in the trash you can delete them all at once, that's the only thing that drives me crazy about the ipad, I use my surface 2 or laptop to delete a lot of mail at once, at one point my inbox went up to over 10000 emails Before I got my laptop.

How can we run reports from the front enf of iProcurement...

Hi Guys,
I need to create a link to run reports from the front end in iProcurement webpage instead of using apps SRS to run the report...
help needed...
thanks
aman

Hi Tapashray,
That was a great help. Thank you so much. A few more clarifications needed sir..
I refered to a previous link and came to know about a prcedure he followed for a report. So is it the same way that is to be done... I pasted a descr what he said in the thread. In ur solution, you said, have a link bean. what do u mean by that. After i go thru all the steps what this guy told.
It would be of gr8 help if you kindly look in to this for one more minute sir..
thanks
Creating a new report in 11.5.9
Re: Creating a new report in 11.5.9
Posted: Mar 11, 2005 7:12 PM in response to: dhergert Reply
Ok, I was able to figure out the functions that were confusing me. For my own record and for those that do not know, I will list how to create the objects necessary to add a new report to a menu.
1-Write JSP (should be written just how Oracle writes theirs)
2-Creat function for the new JSP page as System Administrator responsibility
3-Use Sys Admin to add the function to a menu somewhere
4-Using AK Developer responsibility, create an attribute with the label of the attribute being the name of your function you created. Oracle's convention is the name of the attribute has FS in it.
5-Using AK Developer, lookup the ASF_FUNC_SEC_REG region
6-Drill down into that regions attributes
7-Add a your newly created attribute to this region

Essbase reports from the .sec file

Similar Messages

Maybe you are looking for