Essbase server installation

Have any doby ever got this error message:When creating a new application JVMXM008: Error occured while initialising System ClassException in thread "main" error: 1054003 Error 1200442 loading application: java Virtual Machine errorThanks in advance

Weblogic and ohs and opmnn are part of the additional content install, you must include this component when installing essbase so it installs the opmn components.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • Hyperion essbase server installation problem

    I had a problem while installing hyperion essbase. In the essbase server, I entered a username and while doing administrative configuration utility, I was asked to enter these details and when I entered it says that the information was incorrect. I tried several times but it was locked I guess. So, please help me how to change the user name and the pass word in the essbase server so that I can run the configuration utility with no problems?
    Thanks in advance
    Tejaswani

    You might get a better/faster response in the Hyperion forum at Hyperion EPM
    Srini

  • Essbase 11.1.2.1 New Installation- Cannot configure Essbase Server

    Hi,
    After uninstalling EPM-System 11.1.2.0 and clearing the registries as much as I could; I tried to install Essbase Server 11.1.2.1 on a Windows 2008-R2 64bit platform. The installation went smoothly and I could configure the Hyperion Foundation tools.
    However on the Epm-Configurator, "Configure Essbase Server" section appears read only. Therefore I could not configure the Essbase server. I also cannot start the Oracle Process Manager service as the file OPMN service path directs, does not exist in the directory. In fact I seem to have only "Admin" file under the Oracle\Middleware\Ohs
    Any idea why I encounter such issue although the installation seems to be succesful?
    Thanks.
    Edited by: 857072 on 14.Haz.2011 07:15
    Edited by: 857072 on 14.Haz.2011 07:20

    I have found the solution following this link : Unable to configure Essbase on new installation
    I don't know exactly what did the trick but here are the changes I made before it worked:
    - I have changed the total paging file size
    - Extracted the Additional Content again
    - To install, I chose the Run as Administrator option.
    - First I installed and configured only Foundation Services, later I installed the other components.

  • Which Essbase 11 Server installation assemblies I need?

    Hello Guys,
    on an existing test environment, Im not able to add a Server in the Administration Server. I got the following message:
    Line: -----     
    Essbase Server: xxx com.essbase.eas.essbase.defs.ServerCommands.Connect     22. Juni 2010 13:43:25 MESZ
    Error: 1042006: Network error [10061]: Unable to connect to [xxx:1423].
    The client timed out waiting to connect to Essbase Agent using TCP/IP.
    Check your network connections.
    Also make sure that server and port values are correct
    Line: -----     
    I think the problem is, that the essbase server itself isnt installed because I can't find essbase.exe on the whole system.
    In the EPM-System installer the Node "Essbase Service Server" is greyed, im not able to install it (probably cause the assemblies are missing?).
    Which assemblies Do I need to Download?
    Thanks,
    Martin

    have you downloaded:
    Oracle Essbase Release 11.1.2.0.0 Part 1 of 2
    and Oracle Essbase Release 11.1.2.0.0 Part 2 of 2 for Microsoft Windows (32-bit)
    Apart from that you need to extract the additional contents and RA frame work components coz most of the times these two extracts create problems.
    Have you tried starting essbase from (Assuming Default location)
    /Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/bin/
    Script: startEssbase.cmd

  • Not able to add essbase server ( part of Planning installation)

    Hi experts,
    We have installed and configured the Essbase. We have started the services.
    We are not able to add essbase server to EAS console. It is showing network error ..
    When we see essbase log, we got the following error.
    "Essbase global application does not exist at Shared Services"
    If anyone faced this kind of an issue, please let me know what could be the reason.
    Thanks,
    Ganesh.

    Have you registered Essbase with shared services yet? Try re-registering essbase.

  • Cannot add a New Essbase server into the EAS Console

    Hi can someone assist me...........
    I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
    I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
    I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
    I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
    So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

    Hi can someone assist me...........
    I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
    I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
    I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
    I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
    So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

  • Cannot launch Essbase Server 11.1.2.1.0 upon deployment

    I have just deployed and successfully configured Hyperion EPM Foundation services, Planning and Essbase 11.1.2.1.0 on 1 machine with Windows 2008 R2 64x. However I cannot find Hyperion Essbase service in the Windows services window.
    Why the service has not been created and how can I create an Essbase service in Windows?
    How can I launch Essbase Server manually? Which bat file should I launch for that?
    Thanks so much!

    Hi John,
    Even i have the similar issue. I have deployed EPM suite 11.1.2.2 in windows server 2003. The installation and configuration are correct. But when i try to start the EPM from foundation service it is not starting. When i checked in the Services.msc i found out that there are only 2 hyperion services present up there....1.Hyperion RMI registry. 2. Oracle hyperion configuration manager.
    I tried to start the EPM service manualy through the following but its giving the error'ORACLE_INSTANCE is not SET,.
    opmnctl startproc ias-component=EssbaseInstanceName
    opmnctl restartproc ias-component=EssbaseInstanceName
    opmnctl stopproc ias-component=EssbaseInstanceName
    Do suggest a remedy,
    Thanks,
    Jun

  • Adding of essbase server .

    The new essbase installation is done in the new server on windows.
    The installation is successful.
    so was trying to add the new essbase server in the old server ,but getting this error while adding the server "Network error {10060} Unable to connect to new server name . The client timed out waiting to conect to Essbase Agent using TCP/IP.
    I tried adding the essbase server using the ip address ,what else i can try ,
    How to solve this issue

    Have you not already asked the same question? - In the old server ,not able to add the New server Name.Under the new server name ,the applications are not coming .Gett…
    Cheers
    John
    http://john-goodwin.bogspot.com/

  • ESSBASE server - Connect Error 1042010

    Hi All,
    I am having trouble connecting to Essbase Server on a new install i have done on a windows 2003 32 bit. The Installation went successful, but when i try to start the Essbase server, I am getting below error in essbase.log.
    [Mon Apr 04 17:39:42 2011]Local/ESSBASE0///Error(1042010)
    Network Error [10048]: Unable to Bind Host Server Socket On Port [1423]
    I have checked that the 1423 port is open is in LISTENING status. My essbase.cgf doesnt have NETDELAY and NETRETRYCOUNT entries, but it does have AGENTPORT as 1423.
    Also, I am able to login MAXL client as:
    MAXL> login
    2> admin
    3> admin123;
    OK/INFO - 1051034 - Logging in user [admin@Native Directory].
    OK/INFO - 1241001 - Logged in to Essbase.
    I am new to this stuff and appreciate any help in resolving this issue.
    Sandeep.

    HI,
    I don't think your observations are conclusive about whether Essbase is configured to run on port 1423. Generally this gets changed by editing the Essbase.cfg, AGENTPORT I think maybe something else is already listening on the port.
    Try this:
    netstat -ab |find /i "1423"
    you will get something like
    TCP machine:1423MrBlue:0 LISTENING 14556
    The number at the end of the line with LISTENING is the pid (process ID) you want: 14556
    then type:
    WMIC PROCESS where "Processid='14556'" get Caption,Commandline,Processid
    You will get something like:
    Caption CommandLine ProcessId
    Essbase.exe C:\HYPERION\AS\bin\Essbase.exe 14556
    If the WMIC result is Essbase.exe, then essbase is running on that port.
    What is might be happening is another process is on the port, so Essbase can't open and listen on it - or the network is routing your request to a different port.
    Regards,
    Robb Salzmann

  • ESSBASE server - Connect Error 1042032:

    Hi All,
    I am having trouble connecting to Essbase Server on a new install i have done on a windows 2008 64 bit. The Installation went successful and I am able to start the essbase server from command prompt. From the Administration service Console, I can connect to Admin Server.
    I am able to add a new Essbase server, but when I try to connect or start it gives a following error:
    Error: 1042032: Network Error: Unable to detect ESSBASE server listening on IPv4 or IPv6 network protocols on hostname - [Essbase11G].
    I have also ensured that all Hyperion services are running on the Windows services. I did not find any helpful threads on this error and am new to this product.
    Appreciate any help in resolving this issue.
    rgds,
    sandeepp.

    I found this from Error message reference ....please check it
    *1042003 Network Error message: Unable To Locate serverName In Hosts File*
    Possible Problems
    Analytic Services cannot locate the server computer name.
    Possible Solutions
    ** Is the server name you entered correct? Are there typographical errors?*
    ** Is the hosts file correct?*
    o Windows: Check the HOSTS file for an entry for the server name. If there is no entry, add one. For example, add the following line to the HOSTS file to add a server named aspen with the IP address of 127.0.0.1:
    o 127.0.0.1 aspen UNIX: Check the .rhosts file for an entry for the server name. If there is no entry, add one. For example, add the following line to the .rhosts file to add a server named aspen with the IP address of 127.0.0.1:
    *127.0.0.1 aspen*
    Make sure the .rhosts file is included in your path.
    Increase the values for NETDELAY and NETRETRYCOUNT.
    ** * Are the server computer and the client computer running the same network protocols?*
    ** Are you using the TCP/IP or named pipes network protocol? These are the only two network protocols supported by Analytic Services.*
    ** Is the network protocol installed correctly? Consult the Analytic Services Installation Guide.*
    ** Are you using a stand-alone computer with no network interface card? Consult the Analytic Services Installation Guide.*
    Regards,
    Prabhas

  • Essbase server not listed in Shared Services

    Hello,
    Installed and configured 11.1.2.3 successfully on Windows Server 2008R2.(Essbase, Planning and WebAnalysis)
    In Shared Services it is showing Shared Services, Studio and Reporting only.
    Its not showing Essbase. I just gone through essbase log and deleted essbase.sec file and again configured but no use, still its not showing. after that restarted the system also.
    I am able to login to EAS console, i can create users in essbase but not in EAS. create and disply user options are greyed out.
    Can you please let me know how to resolve this issue?
    Thanks,
    Prathap

    Hello John,
    Its not standalone installation. Below error log for yesterday.
    [Tue Jul 16 08:30:07 2013]Local/ESSBASE0///2212/Error(1051683)
    Attempt to retrieve connection information from the registry failed. Please check reg.properties file and try again.
    [Tue Jul 16 08:30:08 2013]Local/ESSBASE0///2212/Info(1056797)
    Incremental security backup started by SYSTEM. The file created is [C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\ESSBASETS_1373988608.BAK]
    [Tue Jul 16 08:30:08 2013]Local/ESSBASE0///2212/Info(1051051)
    Essbase Server - started
    [Tue Jul 16 08:30:08 2013]Local/ESSBASE0///2212/Error(1051549)
    Can not convert Essbase to Shared Services mode when Essbase is not configured with Shared Services or the initialization process has failed
    [Tue Jul 16 08:30:08 2013]Local/ESSBASE0///2212/Warning(1056822)
    Failed to migrate Essbase to HSS security mode during startup. Check SharedServices_Security_client.log. May need to remove essbase.sec and any of the newly migrated Essbase applications from HSS, then rerun configuration tool.
    [Tue Jul 16 08:30:08 2013]Local/ESSBASE0///2212/Info(1056800)
    Validation of back up file [C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\ESSBASETS_1373988608.BAK] completed with status 0
    And today removed essbase.sec and reconfigured... and in log it is showing
    [Wed Jul 17 00:43:43 2013]Local/ESSBASE0///2236/Info(1051283)
    Retrieving License Information Please Wait...
    [Wed Jul 17 00:43:43 2013]Local/ESSBASE0///2236/Info(1051286)
    License information retrieved.
    [Wed Jul 17 00:43:43 2013]Local/ESSBASE0///2236/Info(1051227)
    No JVM location specified in essbase.cfg. Will try to load from library path
    [Wed Jul 17 00:43:44 2013]Local/ESSBASE0///2236/Info(1311019)
    Classpath during JVM initialization: [;C:\Oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbase.jar;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbaseRegistry.jar]
    [Wed Jul 17 00:43:56 2013]Local/ESSBASE0///2236/Error(1051223)
    Single Sign On function call [css_init] failed with error [CSS Error: CSS method invocation error: getInstance: Failed to get CSSSystem instance, please check SharedServices_Security_Client.log for more information]
    [Wed Jul 17 00:43:56 2013]Local/ESSBASE0///2236/Info(1051198)
    Single Sign-On Initialization Failed !
    [Wed Jul 17 00:43:56 2013]Local/ESSBASE0///2236/Info(1056815)
    Essbase 64-bit  - Release 11.1.2 (ESB11.1.2.3.000B4412)
    [Wed Jul 17 00:43:56 2013]Local/ESSBASE0///2236/Info(1051232)
    Using English_UnitedStates.Latin1@Binary as the Essbase Locale
    [Wed Jul 17 00:43:56 2013]Local/ESSBASE0///2236/Error(1051683)
    Attempt to retrieve connection information from the registry failed. Please check reg.properties file and try again.
    [Wed Jul 17 00:43:57 2013]Local/ESSBASE0///2236/Info(1056797)
    Incremental security backup started by SYSTEM. The file created is [C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\ESSBASETS_1374047037.BAK]
    [Wed Jul 17 00:43:59 2013]Local/ESSBASE0///2236/Info(1051051)
    Essbase Server - started
    [Wed Jul 17 00:43:59 2013]Local/ESSBASE0///2236/Info(1056800)
    Validation of back up file [C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\ESSBASETS_1374047037.BAK] completed with status 0
    [Wed Jul 17 00:44:21 2013]Local/ESSBASE0///3544/Info(1042059)
    Connected from [fe80::6963:3165:951c:f79d]
    Thanks,
    Prathap

  • The report server installation is not initialized. (rsReportServerNotActivated) (rsRPCError) Problem

    hi all,
    I just installed the reporting service and was configuring it.. and when i try to access it via the browser i get the following error :
    "The report server installation is not initialized. (rsReportServerNotActivated) (rsRPCError)"
    When i go to the configuration tool i see the initialized tab greyed out with an X. How can i fix this problem ?
    Please help, i am open to ideas.

    I cant get into it..
    when i click on the initialize tab it goes no where.. since its greyed out.
    This is what my rsreportserver:
    <Configuration>
        <Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAPMlqBjowR0Wc2PsZTt8ubgQAAAAiAAAAUgBlAHAAbwBy
    AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAAANmAACoAAAAEAAAAKuZ9/RkgkVVFff8TowDacEAAAAA
    BIAAAKAAAAAQAAAAYydq6zu5Vw/UKFYwQOsI8RgBAAC+zTe1u8S4v+Jr08+s9SEZiAUHrwpnpGMf
    04ooFOQisqo7rVO5s7CRu2y81LGigD/AJY/gYJ7oGVui8NlMRYcPwqWp7152Foz4nmNVxbvI3Drd
    hAN4k3Loi2NHXR8sP7wmBeOTDHenMR+5A0KcqXzf2q9w30wFpiC6qC7TR4ogCcDWGwCKw9UT6sMU
    7WzPEtver6oMgGJYN6Otm0qf1hEEEZ8BGKzFRC3CWmm7lMi60EGIng53k/3QSu5UJ2P7J4S3dTor
    eITJIfLTt+k/sRJn1gkrMP6PUGfuaAsl79AjOiDSaeluxWo/jqVwNJcKjHEpIQlaSBBOV/vD3Q1A
    scKlYsUXh2lARG/AGvlS/+tWuDfF7H16eX5VFAAAAPX9eFGdbE4J/YNa1wqJn7XRfaC+
    </Dsn>
        <ConnectionType>Default</ConnectionType>
        <LogonUser></LogonUser>
        <LogonDomain></LogonDomain>
        <LogonCred></LogonCred>
        <InstanceId>MSSQL.3</InstanceId>
        <InstallationID>{5dab2548-1d82-4cdf-85d8-febe60944ed7}</InstallationID>
        <Add Key="SecureConnectionLevel" Value="0"/>
        <Add Key="ProcessRecycleOptions" Value="0"/>
        <Add Key="CleanupCycleMinutes" Value="10"/>
        <Add Key="SQLCommandTimeoutSeconds" Value="60"/>
        <Add Key="MaxActiveReqForOneUser" Value="20"/>
        <Add Key="DatabaseQueryTimeout" Value="120"/>
        <Add Key="RunningRequestsScavengerCycle" Value="60"/>
        <Add Key="RunningRequestsDbCycle" Value="60"/>
        <Add Key="RunningRequestsAge" Value="30"/>
        <Add Key="MaxScheduleWait" Value="5"/>
        <Add Key="DisplayErrorLink" Value="true"/>
        <Add Key="WebServiceUseFileShareStorage" Value="false"/>
        <!--  <Add Key="WatsonFlags" Value="0x0430" /> full dump-->
        <!--  <Add Key="WatsonFlags" Value="0x0428" /> minidump -->
        <!--  <Add Key="WatsonFlags" Value="0x0002" /> no dump-->
        <Add Key="WatsonFlags" Value="0x0428"/>
        <Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException"/>
        <Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException"/>
        <Service>
            <IsSchedulingService>True</IsSchedulingService>
            <IsNotificationService>True</IsNotificationService>
            <IsEventService>True</IsEventService>
            <PollingInterval>10</PollingInterval>
            <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
            <MemoryLimit>60</MemoryLimit>
            <RecycleTime>720</RecycleTime>
            <MaximumMemoryLimit>80</MaximumMemoryLimit>
            <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
            <MaxQueueThreads>0</MaxQueueThreads>
            <UrlRoot>http://oneilreports/reportserver</UrlRoot>
            <UnattendedExecutionAccount>
                <UserName></UserName>
                <Password></Password>
                <Domain></Domain>
            </UnattendedExecutionAccount>
            <PolicyLevel>rssrvpolicy.config</PolicyLevel>
            <WebServiceAccount>NT AUTHORITY\SYSTEM</WebServiceAccount>
            <IsWebServiceEnabled>True</IsWebServiceEnabled>
            <FileShareStorageLocation>
                <Path></Path>
            </FileShareStorageLocation>
        </Service>
        <Extensions>
            <Delivery>
                <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
                    <MaxRetries>3</MaxRetries>
                    <SecondsBeforeRetry>900</SecondsBeforeRetry>
                    <Configuration>
                        <FileShareConfiguration>
                            <ExcludedRenderFormats>
                                <RenderingExtension>HTMLOWC</RenderingExtension>
                                <RenderingExtension>NULL</RenderingExtension>
                                <RenderingExtension>RGDI</RenderingExtension>
                            </ExcludedRenderFormats>
                        </FileShareConfiguration>
                    </Configuration>
                </Extension>
                <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
                    <MaxRetries>3</MaxRetries>
                    <SecondsBeforeRetry>900</SecondsBeforeRetry>
                    <Configuration>
                        <RSEmailDPConfiguration>
                            <SMTPServer></SMTPServer>
                            <SMTPServerPort></SMTPServerPort>
                            <SMTPAccountName></SMTPAccountName>
                            <SMTPConnectionTimeout></SMTPConnectionTimeout>
                            <SMTPServerPickupDirectory></SMTPServerPickupDirectory>
                            <SMTPUseSSL></SMTPUseSSL>
                            <SendUsing>2</SendUsing>
                            <SMTPAuthenticate></SMTPAuthenticate>
                            <From></From>
                            <EmbeddedRenderFormats>
                                <RenderingExtension>MHTML</RenderingExtension>
                            </EmbeddedRenderFormats>
                            <PrivilegedUserRenderFormats></PrivilegedUserRenderFormats>
                            <ExcludedRenderFormats>
                                <RenderingExtension>HTMLOWC</RenderingExtension>
                                <RenderingExtension>NULL</RenderingExtension>
                                <RenderingExtension>RGDI</RenderingExtension>
                            </ExcludedRenderFormats>
                            <SendEmailToUserAlias>True</SendEmailToUserAlias>
                            <DefaultHostName></DefaultHostName>
                            <PermittedHosts></PermittedHosts>
                        </RSEmailDPConfiguration>
                    </Configuration>
                </Extension>
                <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
                <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
                    <MaxRetries>3</MaxRetries>
                    <SecondsBeforeRetry>900</SecondsBeforeRetry>
                    <Configuration>
                        <DocumentLibraryConfiguration>
                            <ExcludedRenderFormats>
                                <RenderingExtension>HTMLOWC</RenderingExtension>
                                <RenderingExtension>NULL</RenderingExtension>
                                <RenderingExtension>RGDI</RenderingExtension>
                            </ExcludedRenderFormats>
                        </DocumentLibraryConfiguration>
                    </Configuration>
                </Extension>
            </Delivery>
            <Render>
                <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.XmlDataRenderer.XmlDataReport,Microsoft.ReportingServices.XmlRendering"/>
                <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
                <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering"/>
                <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageReport,Microsoft.ReportingServices.ImageRendering"/>
                <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PdfReport,Microsoft.ReportingServices.ImageRendering"/>
                <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RemoteGdiReport,Microsoft.ReportingServices.ImageRendering" Visible="false" LogAllExecutionRequests="false"/>
                <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false" LogAllExecutionRequests="false"/>
                <Extension Name="HTML3.2" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html32RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
                <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
                <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
            </Render>
            <Data>
                <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
                <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
                <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
                <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
                <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
                <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
                <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
                <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
                <!-- <Extension Name="SSIS" Type="Microsoft.SqlServer.Dts.DtsClient.DtsConnection,Microsoft.SqlServer.Dts.DtsClient, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"/> -->
                <!-- <Extension Name="SAP" Type="Microsoft.Adapter.SAP.SAPConnection,Microsoft.Adapter.SAP.SAPProvider, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> -->
            </Data>
            <SemanticQuery>
                <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
                    <Configuration>
                        <EnableMathOpCasting>False</EnableMathOpCasting>
                    </Configuration>
                </Extension>
                <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
                    <Configuration>
                        <EnableMathOpCasting>True</EnableMathOpCasting>
                        <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
                        <EnableUnistr>False</EnableUnistr>
                        <DisableTSTruncation>False</DisableTSTruncation>
                    </Configuration>
                </Extension>
                <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
            </SemanticQuery>
            <ModelGeneration>
                <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
                <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
                <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
            </ModelGeneration>
            <Security>
                <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
            </Security>
            <Authentication>
                <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
            </Authentication>
            <EventProcessing>
                <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
                    <Event>
                        <Type>ReportHistorySnapshotCreated</Type>
                    </Event>
                </Extension>
                <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
                    <Event>
                        <Type>TimedSubscription</Type>
                    </Event>
                </Extension>
                <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
                    <Event>
                        <Type>SnapshotUpdated</Type>
                    </Event>
                </Extension>
            </EventProcessing>
        </Extensions>
    </Configuration>
    any ideas.

  • To reinstall Essbase server

    We would like to reinstall Essbase server to fix a server performance issue.Can we keep all App and Db to do this or is it necessary to delete all app before?Nota: Essbase 6.5.1 on windows NT 5 environmentThanks in advance

    You can reinstall and keep your applications assuming that you are installing to the same location. Follow the following steps:1) Rename bin directory (under /hyperion/essbase) to binold2) Check that there is an Essbase.sec for in this directory3) Run installation. Install to the same location as before.4) After the installation has completed copy the essbase.sec file from binold to the new /hyperion/essbase/binThe key thing here is that you keep your essbase.sec file. This contains security info, license key info and info re. your current applications.Hope this helps.Paul Armitagewww.analitica.co.uk

  • [Disaster recovery] Moving the Essbase server to another physical server

    Hi All,
    I have 3 Solaris servers part of the EPM 11.1.2.1 environment:
    Server1.company.com:
    Foundation services, APS, EAS
    Server2.company.com:
    Essbase Server, Essbase Studio Server.
    Installation done on a SAN disk using user ID hypadmin
    Server3.company.com:
    *Nothing installed here*.
    Its the standby server in case Server2 goes down.
    Note: I couldn't find any documentation for my below approach... So please understand the risk involved before attempting the same.
    Pre-disaster recovery:
    I copy the home directory of hypadmin from Server2 to Server3.
    During disaster recovery:
    I update the Essbase server host name from Server2.company.com to Server3.company.com and similarly update the opmn.xml file.
    Finally mount the SAN onto Server2 and start up the services.
    Has anyone done the same..? Have you faced any issues? Is there a better way of doing this?
    Thanks
    Regards,
    Kent

    Hi,
    I believe the usual way of doing this is to have a DR environment, rather than just one server (so for you you would have 2 DR servers). The DR environment has hosts file entries to map Production host names to DR IP addresses.
    In DR you are connected to a separate SQL instance and you install and configure the products exactly as you would for Production (exactly the same hostnames).
    Then when you are finished you shut down the DR environment and turn on SQL log shipping between the Production and DR databases.
    If your Production environment goes down you stop the SQL log shipping, then you can bring up DR and change the DNS names (as required) to give your users access.
    For Essbase storage you can either backup Production cubes to DR or mount the Production SAN in DR. The only problem with the latter is that if Production goes down and the SAN is lost you can't bring up DR fully either.
    Let me know if you still have questions.
    -Dan

  • Shared Services doesnt show my Essbase server

    Hi, im wondering if anyone out there can help.
    I have been working on a new System9 Installation.
    I have installed all of the Foundation software (Shared Services), Web analysis on a windows 2003 32 bit server and installed the Essbase application on a windows 64bit. I have gone through the configuration process and registered all of the products with shared services, however when i connect to shared services through http://SERVER:port/interop/ and sign in i cant see the essbase server? im really lost with this and not sure what to try.
    I have set up my SQL databases and shared severices is talking to them i guess as SS works. (HSS, BIPLUS)
    On all the setups i left the standard defualt credentials as the same. so on the essbase install the user name is admin and password, password for instence. Does this make a difference?
    Any help will be greatly appreciated as i am very lost with this.

    Hi,
    You won't see the essbase server in shared services until you convert essbase to shared services security mode.
    If you log into EAS and connect to your essbase server, expand the server and right click security, choose "Externalize Users", then follow the options to convert to shared services security, more detailed information available at :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_eashelp/sec_mode.htm
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for