Essbase, shared services, projects, users

I have installed shared services and cnfigured it
now installed essbase
EAS
Provider services
and configured in the above mentioned manner
(DID not start essbase and EAS till now)
when I log into shared services....i see only bussines rules under projects
no analytical services under unassigned applications.....
how can i see essbase server in shared services user management console.......
it might be a basic funda....i am not getting
help me in solving this....
Thanks in advance

Hi,
Have you converted essbase from native security mode to shared services security.
In EAS, right click security and choose "Externalize users"
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • Essbase - Shared Services - Maxl - User creation

    Hi,
    I have an issue looking similar to [Automating User/Group creation & Assigning filters in Shared Services|http://forums.oracle.com/forums/thread.jspa?threadID=1009127]
    When trying to add internal groups to an external MSAD user, I get following messages:
    h3. when adding a group to an external user:
    h6. alter user 'x29027' add 'GR_GROUP';
    Maxl returns:
    h6. Statement executed with warnings.
    h6. User x29027 does not exist
    => the system does not recognize the user
    h3. when trying to create this user first as an internal user
    (based the settings from on another external user)
    h6. create or replace user 'x29027' identified by 'password' as 'i09740';
    Maxl returns:
    h6. Statement executed with warnings.
    h6. A user/group with the same name (x29027) exist at Shared Services
    => the system does recognize the user in MSAD!
    ===> both statements seem to be contradictory!!!
    h3. Other remarks/thoughts:
    - we have two MSAD links (to two different domains), does this matter?
    - no difference when addressing users as x29027@MSAD_FIB (a syntax similar to the HSS security report output)
    - any possibilities in creating a user internally first (using the 'as' option; to copy settings from another user) and then moving to external? (like alter user 'Test_EDR4' set type external;)
    Thanks in advance
    Erik
    Environment: Essbase 9.3.1.3. with Shared Services

    Hi Erik,
    When you create an user in Essbase, the user will be created both in Essbase as well as Shared Service,
    where as when you create an user in Shared service, the user will not be created in essbase untill you perform refresh.
    In your case you can create the external user in Essasbe by using "Create user 'x29027' type external;'.
    By this you will be creating the user in Essbase and the particular user is recognised in Essbase.
    Now you can add him to any group.
    - Krish

  • Essbase - Shared services security , User provison

    Hi,
    I am new to 11.1.1.2 Hyperion version.(worked on 9.3.1) I have some doubts on the user security in 11 version.
    We have Distribution environment setup like Essbase on linux and remainng applications on windows 2003 server. Essbase is also registerd with shared services. Here are my questions.
    1. If I change the Shared services Admin password (default password) will it effects any other applications?
    *2. How to change essbase admin password (default password)?(from foreground we can change first time only)*
    3. I am trying to login into EAS as well as essbase admin user but under essbase I am not able to create New User. The Create users option on security is disabled seems like already externalised. I am not able to get those users who are created in shared services evnthought using Refresh from Shared servcies+ option in essbase.
    4. If I want to a user with only essbase applicatons provisioned what is the procedure.
    Here i followed the procedure. Created xyz user in shared services and provisioned Only Demo applications. trying to loing EAS with xyz credentials login successfull and prompted for essbase credentials with server name , username (Extername authentication) getting failed. If i provide admin password at essbase server leverl i am able to connect and see all applications.
    Please help me on this...
    Regards
    PrakashV

    Hi,
    Is it the base install of 9.3.1 or is it a later version like 9.3.1.3
    I know there have been a number of security issues being addressed since the base version.
    e.g.
    Security. Users are not de-provisioned properly, causing Essbase applications to remain accessible to
    them. [7197541]
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Automagic User Provisioning Essbase + Shared Services

    Hello All,
    I have recently been able to figure out how to use the Shared Services API for 11.1.2 in a previous post:
    Shared Service API Working 11.1.2
    However, all of the user management and provisioning examples work with native users. Has anyone used this API with active directory or LDAP users? Is there some other way (export/import utility)?
    My problem is that I need to be able to script the user management with shared services and have not been able to find much help. In the past, we ran Essbase in standalone mode and were able to handle this via MaxL generating essbase native user accounts. This will no longer work since we want to use shared services when upgrading to Essbase 11.

    After your comments I looked a bit more closely at the DDL for create user. It looks like i need "type external";
    MAXL> create user 'someuser' type external;
    OK/INFO - 1056060 - User [jdp5209] created.
    This is what i want!
    MAXL> create user 'someuser' identified by 'somepass';
    OK/INFO - 1056060 - User [someuser] created.
    This is not what i want, creates Shared Services native user.
    It seems obvious now, but before, shared services (CSS module to essbase) was "external" so the old external is the new native.
    Sorry, new to shared services! This works. Thanks all

  • Deploy of Essbase Cube from EPMA to Shared Services Project is not possible

    We cannot deploy Essbase Cubes to shared services projects. The projects are not selectable in the box in the deploy dialog. Help is urgently needed. Our version is 11.1.1.3.
    Many thanks
    Michael

    Hi,
    It looks like a known issue
    When deploying an Essbase application, the Shared Services project drop-down is not populated as expected. (8239445)
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Shared Services Project - What does that mean?

    When I create a Planning application from Workspace, there is a drop-down list for "Shared Services Project" in "Select" tab in "Create Application" wizard. What option should I select? Available options are:
    1) Unassigned Project
    2) APS 9.3.1 Servers
    3) Business Rules
    4) Hyperion System 9 BI+
    5) Analytic Servers
    6) the server where it hosts all Hyperion software
    I've installed Hyperion Analytics Services, Analytic Provider Serivces, BI+ (reporting module), Analytic Administration Services. I've also externalized users in Analytic Services.
    Does anyone know the differences between different options?
    Thanks.

    Hi,
    You can go into Shared services and create a new project called "Planning" then when you register the planning app in shared services you can put it against the "Planning" project.
    Cheers

  • Shared services projects in oracle?

    Hi All,
    What products comprise of Shared services projects in oracle?
    Could someone please cite few examples for clarifications..
    Thanks for your time!
    Regards,

    Hi user;
    What products comprise of Shared services projects in oracle?If your question related wiht oracle shared service please check [this site|http://www.oracle.com/global/uk/sharedservices/ss_10.html] and see its helpfull
    Regard
    Helios

  • LCM Migration - Instance name?  Shared services project Name ? Data source?

    Situation
    * We have hyperion 11.1.1.3.24
    * Objective - trying to perform a LCM file-migration from our DEV environment to UAT
    * DEV has only one PMA enabled Planning Application (“budget”), few FR reports & other related artifacts.
    So far
    * Successfully Exported these 4 (EPMA, Shared-services, Planning & FR) from our DEV
    * When trying to import EPMA into our UAT, noticed the status shows Failed. (Noticed Similar claims have been reported in other posts as well.)
    Another dilemma that I have it what should I enter on these Instance Name, Shared services Project name & Data source.
    * Instance Name ===> ? Not sure. how to find this?
    * Shared services project ===> Haven't created one at all. So, which one should I use OR how to find this out ?
    * Data Source ===> I guess, this would be the EPMA repository database name ?
    Although I can Migrate all the Artifacts into our UAT (as identical to our DEV), Migration status has shown as "Failed". Is this because of the fact I skipped the Destination options with blank values (for Instance, shared-services & data-source). Has anyone ever had success on this Migration step.
    OR Should I disregard this migration status, just because we can see all identical artifacts in our UAT.
    Any help would be greatly appreciated.

    If you log into EPMA and pick an application and select deploy (don't worry you don't have to deploy you can cancel it before you do so),
    it will display a popup which will have the
    Instance Name (usually default), Shared Services Project (drop down will display different application groups available), Data Source (this is the name you gave when you created the datasource for the application)
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Installation of Essbase, Shared services and Planning

    Hi,
    I am using Essbase (64 Bit), Shared server and Planning +mandatory component of hyperion:
    Can i install 32 bit applications Planning, Shared services, Analytic Provider on 64 bit OS (windows 2003 EE)
    Regards
    Kumar

    Cross post :- Installation of Essbase, Shared services and Planning
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Porting the Essbase/Shared Services to other landscape.

    Hi ,
    I need to port/refresh the Essbase/Shared Services (11.1.1.1 on Windows) from Development Environment to Test Environments. Both Environments are under different domains and I dont think I can usre LCM. I have already setup the Foudataion/Shared Services and Essbase on Destination Host. Can someone guide me how I can move the Essbase/Shared Services accross these Environment manually. Any document refrence or step by step instruction will be great help.
    Thanks in advance.
    -Samar-

    John,
    I never worked with CSSImportExport. I will be moving Planning Applicatoin, HFM and FMD along with Shared Services and Essbase. Can I use CSSImportExport for HFM/FDM etc. If you can point out to any good working example or doc on CSSImportExport that would be really very helpful to me. In the mean time , I willl be googling arround the internet about it.
    Regards
    -Samar-

  • Essbase Shared Services

    Hi,
    Can any one tell me what are the significant improvements in Essbase Shared Services with the new Essbase 11.1.1 version over the Essbase System 9?
    If anybody know this, Please let me know. It will be a great help to me.
    Thank you very much

    For all those people that like to read about the latest version of Oracle Essbase.
    http://download.oracle.com/docs/cd/E12825_01/index.htm
    Brian Chow

  • Sync Shared Services External users & Provisioning for Essbase Applications

    Hi Experts !!
    i have externalised user authentication in Shared services . I provisioned all users for Essbase and refresh the security from Essbase ,So all users are working fine
    and can login in Essbase and "Excel add-in" as well..
    but there is one user who is still not working for "Excel Add in"..
    Error is "Login failed due to invalid login credentials"
    Please suugest me the solutions
    Thank you.

    Hi John !
    Yes, User can login in EAS .
    Also User is available under Users in EAS ,But no applications are displaying in Analytic Server , While I have given Administration Privileges for Essbase app.
    But still error while login in Excel add in ..
    Error : Login failed due to invalid login Credentials.
    Also ,After Provisioning , How Can we Sync all all Externalized users from Shared Services itself for All hyperion Projects ???
    Thank you

  • Shared Services Console - User is not authorized for the action

    Hi,
    I have installed Essbase 11.11.3 and configured on Linux. I started EPM and then the Shared Services Console. I created a new group Poweruser and assigned a new user to it. I provisioned the group withall the rights of the admin. This all works.
    When I log on with the new user on the Shared Service Console and go to Essbase Studio Server and click on the Essbase Studio Server application it gives me the message:
    User is not authorized for the action
    This is the same message as I get under the user admin. Can anyone tell me what I can possibly do to make it work.
    The service for EAS is started properly. The one thing that is not configured is HBR.
    Patrick

    Hi,
    What are you trying to achieve, provision a user for essbase studio ?
    EAS is a separate product from Studio.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Neet to locate the shared services native users in SQL server tables

    Hi All,
    We are using Hyperion Shared services to provision users to essbase, planning and HFM(all version 9.3.1). And we are using SQL server 2000 as the database. We created few native users in shared services and provisioned them to HFM, Essbase and Planning. Now we need to find those native users' information in the underlying SQL tables. I followed the documentation and sync-ed the native to relational tables using shared services, but I cannot see the user info for all the users I have created. I would appreciate if you can suggest me how to find the shared services users' and roles information in SQL tables (in the back end).
    Legards,
    Leo

    Hi,
    There are a number of free Ldap browsers that you can download, e.g.
    http://www.mcs.anl.gov/~gawor/ldap/demo.html
    http://www.ldapbrowser.com/download.htm
    Once you have installed then ldap browser you just need to point it to your Openldap
    Host :- machine with OpenLdap running
    Port :- 58089
    Base :- dc=css,dc=hyperion,dc=com
    User DN :- CN=root,dc=css,dc=hyperion,dc=com
    And just the root password which you can change in HSS in 9.3
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Integrate active directory with Planning/ Essbase shared services security

    Hi All,
    we try to set up MSAD integration for Planning and Essbase 9.3.1.
    Everyting works fine but the accounts that pop up are first and last name in the user field instead of the userid used in windows to login. so in windows i login with mroest but now in Hyperion i have to use Marc Roest.
    DC=NL, DC=xxxx, DC=Corp
    ID Attribute = ObjectGUID
    User DN: CN=Adm Hyperion, OU=xxxx, OU=Utr
    Can anyone please help how to use the samID as defined in MSAD instead of the full name as is now?
    Thanks very much in advance,
    Marc

    Hi John.
    Do you know why OpenLDAP database would not migrate to the unique identity attribute say if I use sAMAccountName for the ID Attribute field on the MSAD User Configuration screen in Shared Service? It will not update the identity in OpenLDAP when I browse it, even after all the services have been restarted, including OpenLDAP and Shared Services...
    Any help would be appreciated.
    Thanks
    .-a furstrated programmer...

Maybe you are looking for

  • IPod Classic updating ratings and not play counts in iTunes

    I am currently using an iPod classic purchased in 2010 with iTunes 10.5.3.3.  however I encountered the same issue on 10.6.1 which made me think that if I downgraded that it would solve my problem but it hasn't. Here is my problem. Over the past two

  • Why won't copy/paste images appear in PDF (from Word 2007)?

    I find all places in a Word 2007 document where content copied from Power Point 2007 and then pasted into a Word 2007 document does not appear in the subsequent PDF file I generate. White space of the same size as the pasted content appears in its pl

  • "Print Settings" are not stored in the print preset

    Hi everybody, It seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be sel

  • How to change a reminder mode in Nokia E7?

    Hello! I am sorry for the English. I use the translator. I need to appoint business which should proceed in a current of several days in calendar E7. I want to receive reminders each three hours while business will not come to the end. If I press the

  • Setter method not getitng called in the custom tag

    Hi, I have written a custom tag and I have declared an attribute in the tld file and have specified the setter method for the same in the java tag file but that setter method is not getting called...for rest of the attributes, the methods are getting