Essbase Smart View report
When using the Essbase Excel Add-in, you can highlight part of the Essbase report and refresh only that part. By doing this, you can have multiple Essbase reports on one Excel tab.
I tried and can't do this in SV (we are using 931). Is there a way to have more than 1 smart view report in one tab?
SmartView is definitely not the Essbase Add-in.
I have found that even the "Highlighted Selection Refresh" doesn't behave as I would expect.
One solution I can see for this situation is to have a sheet that links to 2 tabs. Each tab has 1 SV report.
There is feature Refresh All Sheets. I find this to be very useful and it works great.
Hope this helps,
Brian Chow
Similar Messages
-
Embed dynamic smart view report into power point
Hello All.
can amyone help with How to Embed dynamic smart view report into power point
Thanks.Have you tried dragging and dropping onto a ppt slide? I just did and showed up sheet one of the workbook. If you have many sheets in the workbook and want to show a particular sheet/data, you may want to save workbook with that sheet visible when you reopen. One thing I have not checked is dynamic content of the worksheet.
Venu -
Hello,
I have created New Essbase Cubes/Applications in EAS , and I also restarted the APS Services.
Yet I cant see the new Essbase Applications when I open the Smart View connection.
Is there anything which should be needed to be done in order to get the new Applications shown in Smart View.
Thanks !!Are you sure that smartview user have access on that application??
Which version you are on??
Are you able to see the application under Application group in Shared Services ??
Cheers!
Sh!va -
Essbase Smart View & Office 2007 Add-In
Hi
I am currently using Hyperion Essbase version 9.3.1. How do I install Smart View as I believe it comes with this version and also lso how do I install the Hyperion Add-in for Excel 2007 in the ribbon.
Regards
TomHi,
Go to http://edelivery.oracle.com/
Log in
Hyperion Performance Management and BI
Hyperion Performance Management and BI (9.3.1) Media Pack for Microsoft Windows (32-bit) Download
Hyperion Smart View for Office Release 9.3.1.2 Microsoft Windows x86 Installer
Hyperion Essbase - System 9 Release 9.3.1.3 Client Windows Installer
They are standard executable installation files that you just double click and follow the instructions.
If you want later 9.3.1 patch versions of the client, then log into MyOracle support
Cheers
John
http://john-goodwin.blogspot.com/ -
Essbase Smart view installation error
Getting error while installing the smart view on windows operating system
The error is "Please exist all microsoft office applications to proceed with the installation "
I have not opened any excel ,so donot understand whats this errir for and how to solve it.
Please help Essbase gurus .You probably have one of the other Office applications running - remember, Office is not just Excel and Smart View works with those other applications too - and / or it's open invisibly. If you open task manager and look at Processes you may see an instance of EXCEL.EXE (for example) even though Excel isn't visible as an application on your desktop.
-
Essbase smart view not working
while working with essbase, on connection to Smartview. we are using optimize.xls for practise.
when we submit data the HsSetValue function does not work. due to which the data is not retrieved and returns a #NAME error. Due to this we are not able to furthur work on the XLS as the input data sheet doesnt work.
the dimensions are as follows
Scenario
Month
accounts #######
accounts #######
accounts #######Are you sure you (gasp) want to use the classic add-in?
There are a lot of limitations:
http://docs.oracle.com/cd/E17236_01/epm.1112/est_user/apas09s01.html
This one in particular would be fatal for me:
>
In Spreadsheet Add-in, cubes built by Essbase Studio do not display the visual clues that denote drill-through cells. Because there is no way to know for certain which particular cells are drill-through cells, any data cell in the spreadsheet is a potential drill-through cell.
>
That link tells you how to test to see if a cell can be drilled on, but why would you want to do that?
Regards,
Cameron Lackpour -
Can't access "Range Retrieval" & "Butterfly report" features in smart view
Hi Experts,
I need your help regarding enabling new features of smart view.
I am not able to use the following feature of smart view:
- Range Retrieval
- Butterfly report
Do I have to configure any settings to enable this feature??
Currently I am using the following:
smart view client: 11.1.2.2.00
smart view provider: 11.1.2.1.00
Essbase: not sure (will try to get the info if needed)
Thanks in advance expertsHi Glenn,
Thank you for your response.
That must be the cause.
I saw a documentation that the smart view 11.1.2.2 is compatible with service provider 11.1.2.X,
but did not mention any loss in functionality for earlier versions like 11.1.2.1.00.
maybe I missed it.
Thanks again for your help -
Smart View for Essbase Not Available in Planning Rapid Deployment
I have successfully deployed EPM 11.1.2.3 by following the steps in the Planning Rapid Deployment guide (http://docs.oracle.com/cd/E40248_01/epm.1112/epm_planning_rapid_deploy/epm_planning_rapid_deploy.html). However, when I bring up Smart View using a Shared Connections URL of http://<servername>:9000/workspace/SmartViewProviders, I only get connections for Planning and for the Reporting and Analysis Framework. How can a I get a connection for Essbase?
As it turns out, the 11.1.2.3 Planning Rapid Deployment wizard doesn't install Essbase Provider Services, just Planning Provider Services and Reporting and Analysis Provider Services. Until I installed Essbase Provider Services, I wasn't even able to create a private connection to Essbase. I had to run InstallTool.cmd and select "Provider Services Web Application" from the Essbase section of the selection screen. I also had to run the configuration utility and select "Deploy to Application Server" under "Provider Services" in the Essbase section of the selection screen.
After that, I was able to create a private connection to Essbase with this URL: http://<server name>:9000/aps/APS
Although the private connection was now working, the Essbase connection was still not showing up as a shared connection in Excel, when I set the Excel Smart View option for Shared Connections URL to http://<server name>:9000/workspace/SmartViewProviders. I was able to get this working by running the configuration utility again and selecting "Configure Web Server" in the "Hyperion Foundation" section of the selection screen.
I was also able to create an XML file as Celvin suggested, using http://<server name>:9000/aps/APS for the Essbase connection. Thanks for the suggestion!
-Tom -
Help On Essbase And Smart View
Hi all,
launching a calc script via smart view occours the following error:
"the request timed out. Contact your administrator to increase netRetryCount an netRetryInterval".
Here the application log output:
[Mon Oct 31 12:19:32 2011]Local/Ap_com/Db_com/user_01/Info(1013163)
Received Command [Calculate] from user [user_01] using [Bg12_Cal.csc]
[Mon Oct 31 12:19:32 2011]Local/Ap_com/Db_com/user_01/Info(1200481)
Formula for member [ELABORATOBDG] will be executed in [TOPDOWN] mode
[Mon Oct 31 12:19:32 2011]Local/Ap_com/Db_com/user_01/Info(1200481)
Formula for member [ELABORATOBDG] will be executed in [TOPDOWN and CELL] mode
[Mon Oct 31 12:19:32 2011]Local/Ap_com/Db_com/user_01/Info(1200481)
Formula for member [ELABORATOBDG] will be executed in [TOPDOWN and CELL] mode
[Mon Oct 31 12:19:32 2011]Local/Ap_com/Db_com/user_01/Info(1200481)
Formula for member [ELABORATOBDG] will be executed in [TOPDOWN and CELL] mode
[Mon Oct 31 12:19:32 2011]Local/Ap_com/Db_com/user_01/Info(1200481)
Formula for member [ELABORATOBDG] will be executed in [TOPDOWN] mode
[Mon Oct 31 13:25:01 2011]Local/Ap_com///Error(1013080)
Already Connected to Server -- The previous connected request still running, try again
[Mon Oct 31 13:32:01 2011]Local/Ap_com///Info(1013205)
Received Command [Get Database Info]
[Mon Oct 31 13:32:01 2011]Local/Ap_com///Info(1013205)
Received Command [Get Database State]
[Mon Oct 31 13:34:07 2011]Local/Ap_com///Info(1013205)
Received Command [Get Database Info]
[Mon Oct 31 13:34:07 2011]Local/Ap_com///Info(1013205)
Received Command [Get Database State]
[Mon Oct 31 13:38:28 2011]Local/Ap_com///Error(1013080)
Already Connected to Server -- The previous connected request still running, try again
[Mon Oct 31 13:39:34 2011]Local/Ap_com///Info(1013210)
User [user_01] set active on database [Db_com]
[Mon Oct 31 13:39:34 2011]Local/Ap_com/Db_com/user_01/Info(1013091)
Received Command [SetAlias] from user [user_01]
[Mon Oct 31 13:39:34 2011]Local/Ap_com/Db_com/user_01/Info(1013091)
Received Command [SetSpanRPM] from user [user_01]
[Mon Oct 31 13:39:34 2011]Local/Ap_com/Db_com/user_01/Error(1013254)
Hybrid Analysis spanning cannot be enabled on database [Db_com] in application [Ap_com]. Check if the database has Hybrid Analysis and if span into relational source is enabled.
[Mon Oct 31 13:39:34 2011]Local/Ap_com/Db_com/user_01/Warning(1080014)
Transaction [ 0xc0005( 0x4eae9706.0x7c060 ) ] aborted due to status [1013254].
Moreover the configuration file[essbase.properties] is:
#APS Properties File
#Tue Apr 21 15:43:14 CEST 2009
smartview.webservice.autoadd.EssbaseLocalhost.server=false
system.log.file.buffer.size=0
nativeSecurity.css.config.file.name=http\://myhubserver\:58080/interop/framework/getCSSConfigFile
system.dataDir=E\:\\Hyperion\\AnalyticProviderServices/data
ESSLANG=Italian_Italy.Latin1@Default
hubServer=myhubserver
hubLogLevel=warn
olap.server.netConnectRetry=30
system.faultTolerance.retryTime=200000
service.olap.dataQuery.grid.maxColumns=255
olap.server.netSocketTimeOut=200000
smartview.webservice.autodeploy.force=false
hubPort=58080
system.log.level=warn
system.session.timeout=60
system.log.file.name=E\:/Hyperion/AnalyticProviderServices/bin/apsserver.log
smartview.webservice.client.installer.location=
applicationRegistrationFile=E\:/Hyperion/AnalyticProviderServices/data/APS.instance
system.log.console.enable=false
smartview.system.checkforspecialchars=true
service.olap.dataQuery.grid.maxRows=5000
nativeSecurity.casEnabled=true
productRegistrationFile=E\:/Hyperion/AnalyticProviderServices/data/APS.product
smartview.webservice.gzip.compression.disable=true
system.log.trace.enable=false
system.cluster.monitorInterval=200000
olap.server.netRetryCount=600000
nativeSecurity.enabledProviders=css
domain.store.file.name=E\:\\Hyperion\\AnalyticProviderServices/data/domain.db
smartview.webservice.sso.httpheader.property.username=
localID=53426
smartview.webservice.autodeploy.warn=false
system.log.file.enable=true
olap.server.netDelay=200000
system.log.file.option=0
Thanks in advance for any help
Edited by: BlackWolf on 2-nov-2011 7.59
Edited by: BlackWolf on 2-nov-2011 8.01Hi,
Yes, essbase could help make your reports faster, but it depends also on the cube design. Essbase allows you to calculate all the upper levels and store it. This is (2+2=4), essbase stores 2 and 2 and 4 so then you can go and read the total with the report without having to calculate it wihle the user is retreiving the data. This is a good advantage of essbase.
About #2, no one can tell you if you should or should not use Informatica as that depends on each company. You can use OBIEE with Essbase and you will need a place to store the data that Essbase will then pull up. It could be any DB you want...
Hope this helps. -
Essbase Error (1042017): Network Error in Smart View
I try to do Ad hoc ahalysis in Smart View via Essbase provider and get Essbase Error (1042017): Network Error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the olap.server.netConnectRetry and/or olap.server.netDelay values in the essbase.properties.
I've tried to increase this values in essbase.properties file in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\bin directory and in Essbase Administration Services console but it has no effect. This behaviour occur only for one application. Early I has no problem with this.
How this can be fixed?Please follow the steps below:
1) Add the following parameters to the mod_wl_ohs.conf for APS within the aps location match section:
WLIOTimeoutSecs 1800
Idempotent OFF
For Example:
<LocationMatch ^/aps/>
SetHandler weblogic-handler
WeblogicCluster vm0asazon1112:13080
WLIOTimeoutSecs 1800
Idempotent OFF
</LocationMatch>
Note: mod_wl_ohs.conf file is located in <drive>:\<Oracle_EPM_Home>\Middleware\user_projects\epmsystem1\httpConfig\ohs\config\OHS\ohs_component directory.
Make a back up copy of the mod_wl_ohs.conf file before editing.
2) Save the mod_wl_ohs.conf
3) Restart Reporting and Analysis Framework - Web Application
4) Restart Oracle Process Manager (ohsInstancexxxxxxxxxx)
For more details on the Weblogic Plug-ins parameters, please refer to this link: http://download.oracle.com/docs/cd/E13222_01/wls/docs92/pdf/plugins.pdf
Hope this helps.
HTH-
Jasmine. -
Smart View Shared Connections - Oracle Essbase - How is list derived?
Testing out the new build of Smart view 11.1.2.2.310 on Office Excel 2010. In Shared connections I show three Essbase servers
EssbaseCluster-1
EssbaseCluster-2
EssbaseCluster-3
Via EAS there is only EssbaseCluster-3. What file or lookup is Shared Connections pointing to for 1 and 2? If I try to open them they give a 'cannot connect to Essbase server' error.
How can I remove these? Right-click delete option not available...
JTSIt is usually being picked up from the Shared Services Registry, if you run a registry report do you have 3 clusters?
Cheers
John
http://john-goodwin.blogspot.com/ -
Not able to export web analysis report to excel smart view from workspace
Not able to export web analysis report to excel smart view from workspace.
Error :Web launch operation has been cancelled.
Can anyone help me to resolve this issuesI realized that I can put a block in WebI and then I can pull that in excel alongside of static header, after putting the question.
My interest to know whether it is by design in XI 3.0 or it is an issue. But by the replies it seems to me like it is by design.
@Anis: I can't go for header as part of Body. Because this report is viewed in Web by many other users. I can't have separate report for Live office, it is a restriction for me. If I use the header in body, it wont look good I guess. -
Not able to get Essbase Server list in Office with Smart View 11.1.2.1
Anybody tried Shared Connection in Smart View 11.1.2.1? I am able to connect to but it does not show any servers in the non editable drop-down box. I tried this with Office 2003 sp3, Office 2007 and office 2010 but none of them is working. Also i tried to find out the datasourse.xml file in LWS-aps in shared services console but its not there. i tried the solution given on this link also but the datasourse.xml file is not in place.
http://timtows-hyperion-blog.blogspot.com/2011/04/smart-view-private-connection-issue.html
my Environment.
Win 2003 SP2 32 bit
SQL 2005 on separate windows box
EPM 11.1.2.1
Shared Services
Essbase Server
Essbse Client
Essbase Integration
Provider services
Essbase Studio
Configured all of the above components successfully.
i'm connecting to Essbase through this URL http://<server>:19000/workspace/SmartViewProviders . it shows the login window and allow me to get in. but the drop down box is empty. no server listed.
Please let me know what I'm missing.I am also getting same problem as gaurav,
I checked,"http://<servername>:13080/aps/SmartView" Analytic Provider Services also running.
instead of Server name i tried localhost, ip address, and computer name.
but still not getting anything in drop down, even "Add New Server" Option also.
I thought this may be because Analytic Provider Services was configured after Shared Services. But for that i followed the steps:
1. Stop the Analytic Provider Server and Foundation Services.
2. Open the EPM System Configurator through Start -> All Programs -> Oracle EPM System -> Foundation Services -> EPM System Configurator.
3. Expand Hyperion Foundation and only tick the option 'Deploy to Application Server'
4. Click Next through the Configurator until complete.
5. Restart the Foundation and Analytic Provider Server Services.
6. Open Excel, connect to the Shared Connections.
But problem Continuous. -
Essbase connection error via smart view
Hi All
I'm currently experiencing difficulties connection to essbse via smart view. The application has two databases. All users can connect to one of the databases but not the other one. The essbase server password has not been changed. The version we are currently using is 11.1.1.3
this is the error from the smart view log file.
SVC][ERROR:1][SVC4][SVC][ecid: fa3c226a-c687-44cc-afa2-f107f7564a40,0]Cannot get olap user. Essbase Error(1030008): NULL argument (2) passed to ESSAPI function EssGetUserEx
SVC][ERROR:1][SVC4][SVC][ecid: 6d92db79-2caf-4d8d-a576-86aafa47e21d,0]OLAP_error (1023040): msg from remote site [[Thu Apr 25 09:15:48 2013]Local////Error(1051293) Login fails due to invalid login credentials]
Any assistence will be verymuch appreciated.Hi,
I got this error while connecting to the Essbase server through EAS Console. To resolve this issue I just removed the Essbase server from the Enterprise view and added the server again. After that I was able to access the Essbase applications.
But I am not sure about smart view. Also make sure that you are using the correct login credentials to login into the server.
Thanks,
Aravindh K -
Smart view compatible old essbase excel add-in
hello,
There is someone that knows if the old excel file created with old essbase excel add-in are compatible with smart view.
because I receive the error "the row cannot contain multiple dimensione" when I refresh an old excel with smart view
Thanks
maxxI have a problem with old excel-addin, excel crash when retrieve data or drill down.
smart view works fine, but is not compatible with old version of file excel created with old essbase add-in. Exist a work around to use old file excel with smart view.
Maybe you are looking for
-
Multi-month, year, and date-range views
My apologies for wasting everyone's time if I've missed something really obvious here, but am I correct in concluding that there is no way to generate anything beyond a static one-month view in iCal? No multi-month view? No year view? No "view date r
-
FaceTime can't sign in.
FaceTime can't sign in with good Apple ID.
-
Really strange: plugging in DVI cable turns off powerbook
So I just bought a new KVM: an Avocent Switchview DVI. 4-port DVI/USB switchbox, very nice. Problem is, if I plug the (known good) ADC 23" Cinema Display (with ADC->DVI converter) into it, and then plug it into my Powerbook, and then turn on the Powe
-
Different CSS link effects on the same page?
I have a CSS menu that looks good and works using the a:hover and a:link rules. I want to have the links on the rest of the page act differently. Can someone help me understand how to create different CSS rollover effects for different links on the s
-
Can we implement SAP with SD, MM, PP WITHOUT FI?
Hi All, Can we implement SAP MM, SD & PP without SAP FI? If so, how? Please help me Thanks Edited by: sk mukka on Feb 9, 2011 1:54 PM Edited by: sk mukka on Feb 9, 2011 2:19 PM