Essbase studio drill thru report Test error

Hi All,
Essbase studio drill thru report is producing the below error: Unable to retrieve drill thru result.
Error in the select statement. Line = 2466.
Error in query execution. Please review the query and try again.
Cannot execute a SQL query
ORA-01791: not a SELECTed expression
Any idea... i am able to test for some of the dimensions but this error is coming for a few dimensiosns .... i verified all the joins between dimensions and facts.. everything is fine.
Thanks,
Praveen

Hi Glenn,
This is a test report executed with in Studio console. Yes, i did verify the generated sql by studio server and was able to drill down to the detail. I dont find any information in the logs when testing this. Probably, i would need to increase logging level. Will do that and update here if i dont find much help there.
Thanks,
Praveen

Similar Messages

Essbase Studio drill thru report error

Hi All,
Essbase studio drill thru report is producing the below error: Unable to retrieve drill thru result.
Error in the select statement. Line = 2466.
Error in query execution. Please review the query and try again.
Cannot execute a SQL query
ORA-01791: not a SELECTed expression
Any idea... i am able to test for some of the dimensions but this error is coming for a few dimensiosns .... i verified all the joins between dimensions and facts.. everything is fine.
Thanks,
Praveen

Hi Glenn,
This is a test report executed with in Studio console. Yes, i did verify the generated sql by studio server and was able to drill down to the detail. I dont find any information in the logs when testing this. Probably, i would need to increase logging level. Will do that and update here if i dont find much help there.
Thanks,
Praveen

Essbase Studio Drill-Through Report

Is it possible to run an Essbase Studio drill-through report in a SmartView spreadsheet that is connected to a cube that was not deployed by Essbase Studio? If so, how do you associate the drill-through report with the cube?

You have to trick Studio into thinking the cube was built from Studio. In my session on Advanced Studio Tips and Tricks at the KScope conference at the end of June I detail a couple of ways to do this. It is too detailed to put into a post here

Essbase Studio Drill-thru security

I applied a filter in Essbase so a user had filtered access. In Smartview I retrieve data and properly gett the NoAccess message, so far so good. If I do a drill-thru. It drills to the data in my report. I would think IT should prevent drill-thru from occuring. Am I doing something wrong? I don't think it should work this way.

Hi Glenn,
This is a test report executed with in Studio console. Yes, i did verify the generated sql by studio server and was able to drill down to the detail. I dont find any information in the logs when testing this. Probably, i would need to increase logging level. Will do that and update here if i dont find much help there.
Thanks,
Praveen

Excel is not showing multiple Drill thru report selection option

We have created 3 drill thru reports in EIS, excel is not showing Select Drill-Through Report Dialog Box when tying to acess drill thru reports. It defaultly executes the first drill thru report, we want it to list the available reports so that we can select accordingly after view/launch is selected.
essbase 7.1.6 version SQl server 2000

Hi,
This Prompt message would have been set in WAD(XHTML Coding section) in your old project. Now , you cross check your Web template for the same. Your issue will be resolved.
Regards,
Suman

Filters for Drill thru reports

Can we make the filter available for all users in a drill thru report?
Thanks
Kannan.

Maaguiar,We have Analyzer 6.1.1 installed within WebSphere Unix running AIX 4.3.3 We have been told by Hyperion support that this is a bug. No confirmation has been made yet as to whether this will be fixed in version 6.2 which has a RMF date of late October

Essbase Studio Drill-through for Recursive Hierarchy - Generation 1

I'm using Essbase Studio 11.1.2.3 to build an ASO cube. All my hierarchies are recursive (parent-child). I would like to define a drill-through report and I understand that I have to use the Advanced Settings option to specify my intersections. Now one of my dimensions is optional for the users - they don't have to specify a member (they can leave it at the highest level - dimension name on the spreadsheet). Under 'Advanced Settings' for DT report in Studio I have to specify a Generation value of 2 or greater than 2. How do I enable drill through in cells where one of the dimension is at Gen1 ? Specifying the level number didn't work. I think if you specify Level in 'Advanced Settings', drill through is allowed only if that specified level of the dimension is chosen, if Gen 2 is specified, then drill through is allowed as long as the dimension-members specified are at or above Gen2. But what about Gen1?

Yep, this is a limitation. I suggest you create two reports one that takes your "optional" dimension out and a second one that has it in. if they don't need the dimension, select the first report and if they need the filter then the second. I m always a little leery with recursive hierarchies and Gen 2 or 3 sine they create a list of level 0 members under the selection in the query and there are limits to the number of members in an in clause and at high levels in the hierarchy it is easy to surpass it (In Oracle it is 1000 members)

Essbase Studio & Drill-through

Hello All,
Can I still create a drill-through report in Essbase Studio & update a previously built [by EPMA] Essbase cube? Please consider this urgent...
Thanks,
Cheryl

Cheryl,
One of the draw backs right now of using EPMA to load Essbase cubes is that any changes that are made to your Essbase cube in EAS, etc. post a EPMA Essbase Cube deployment will be overwritten and vice-versa. EPMA is best for working with HFM and Planning right now and is not best suited for Essbase deployment right now even though it can handle simple Essbase cube deployment. If you cannot do what you need with EPMA alone then you will need to deploy using Essbase Studio, EIS, or EAS.
However, other options would be to utilize partitioning or something similar to get the drill-through capability from another "Reporting" cube. That would be the immediate solution I believe.
http://www.artofbi.com
Edited by: Christian Screen on Nov 17, 2009 9:10 AM
Edited by: Christian Screen on Nov 25, 2009 12:30 PM

EPMA Essbase Studio Drill-through

If I deploy a Planning application via EPMA is it possible to configure drill-through from Planning via Essbase Studio?
Thanks,
Jz

The drill-through path from Planning is from a web-form to FDM.
Can this hack drill through from a Planning web-form or would I need to created reports in Planning to drill-through?
The Studio documentation only talks about Reports...
Thanks,
Jz

Essbase Studio Cube Deployment SQL Connection Error

Hello,
Has anyone seen this error in studio.
Failed to deploy Essbase cube
Caused By: Failed to build Essbase cube dimension: (Accounts)
Caused By: Cannot incremental build. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
I connected to the SQL database without issue creating the data source and I can view the sample data on the dimension element. The only time I have a connection issue is during cube deployment. The log is no help.
Thanks

Hi Celvin
Thanks for your reply.
I can connect from the same Essbase Server from the data source connection used in the Essbase Studio console.
I am not using any encrypted passwords.
I can log into MaxL with no issues, but running trying to execute the following command is where I get the error.
deploy all from model 'GL_Analysis' in cube schema '\ANALYSIS\Schema\Schema' with option delete_members login $1 identified by $2 on host 'server1' to application 'test1' database 'test1' overwrite values using connection 'essbaseserver' keep 200 errors on error ignore dataload write to default;
It allows me to connect and deploy sucessfully using the Maxl installed from the Essbase client version 11.1.2.2. However running the MaxL installed from the Essbase client MaxL version 11.1.2.3 seems to provide me with the connection issue. I am trying to determine if it is a bug or something that was missed during upgrade process.
Currently we need to deploy via the Studio.
Thanks.

Essbase Studio - SmartView - Drill Through Error

Hello!
I'm creating a drill through report using Essbase Studio 11.1.1.2. Built the Context, the Report Content and Associations. Perform an ad-hoc analysis via SmartView. Perform a Hyperion | Drill Through Reports and the follow error occurs:
Unable to list Essbase Studio Drill Through Reports : Error in the statement interpret. Line = 1109
Anyone know what causes this and how to resolve it?
Thanks,
Bob

The issue was due to using transformations to prefix characters to ids. The drill through couldn't resolve the cube member name to the data in the tables.
For example, if your source data for your accounts table has an member id of 1, 2, 3 etc. But you use a prefix of A in transformation to build the member in Essbase (A1, A2, A3, etc.), drill through can't resolve it. Drill through is going back to the table and searching for A1, A2 or A3. The table has 1, 2, or 3. A string is not a number, that's the error that basically occurs.
Solution - I updated my tables to have the prefixes (and data types) and removed the transformations. That way when drilling, the Essbase member matches up with the table id.
Thanks,
Bob

Essbase Studio and Drill Through

I have created a ASO application in essbase studio through text data source and succesfuly deployed it to essbase server but in smartview and spreadsheet add in drill through reports are not reflecting.
Standard SQL is also not generating while creating drill through reports.
Error:
Error in the statement interpret. Line = 1657.
Error in the make select statement. Line = 1.
Unable to join filter to the rest of the query. Terminating operation...
This is EPM 11.1.2.0.00 on windows 2008 64 bit
Any help?

Hii
Philip thanks ..
you are right in saying that drill-through is not available for txt data at least in Studio and Integration ..
Essbase provides URL-based drill-through access from Essbase client reporting interfaces (such as Smart View or Oracle Hyperion Financial Reporting, Fusion Edition) to information located on Oracle Enterprise Resource Planning (ERP) applications and Enterprise Performance Management (EPM) applications.
In Integration Services and Essbase Studio documentation, drill-through refers to linking a multidimensional database cell to further data; for example, to transaction-level data that is stored in a relational source.
Regards
Abhishek

"XML Load error: An invalid character was found in text content" Drill Thru

Hi,
I am using Smart View, 2007 ms office.
We are using EIS to have Drill Through reports.
When I select the particular intersection and click on Hyperion --> Adhoc Analysis--> Drill Through Reports,
Drill Through selection window is opening but when click on Launch/Execute.
It throwing below Error
"XML Load error: An invalid character was found in text content"
This error is showing only some intersections...some other intersections are working fine.
The same intersection if retrieve from ESSBASE --> Addins--> linked objects, Drill thru reports are showing fine.
From Excel Addins everythg working fine.
I tried in 2003 MS office from my colleague system. the same error.
"XML Load error: An invalid character was found in text content"
Please someone help me....!
Regards,
Rajendra Prasad Gella.
Edited by: Rajendra Prasad Gella on Jun 10, 2010 4:26 AM

This type of Issue does not happen using Excel Add-in but Smart View. We encountered it as well. I have a feeling the root cause is the ESSLANG which used to be selected during installation. If the Essbase has for instance "English Latin1" or "English US Ascii Binary" and the client does not have it, then this would occur.
We had old SR on it because we were testin the APS 7.1.6. SR 2-603906: Excel Essbase Add-in splitting special characters such as the " ü " in. Whe we reinstalled and selected same ESSLANG as Essbase server the isue stopped.
We did not have to chnage our code to scrub out ant special characters. !
Jullin

Essbase Studio Error(1021001): Failed to Establish Connection With SQL Data

Hi.
I have trying to deploy a cube with Essbase Studio but I get the error: "*Error(1021001): Failed to Establish Connection With SQL Database Server*"
My environment is Linux 5, Oracle 11g and EPM 11.1.1.2. Oracle database and Essbase was installed with diferent users. In the .bash_profile of hypadmin user (that install Essbase) I have set the following variables
ORACLE_BASE=/u01/app/oracledb/product/11.1.0
ORACLE_HOME=$ORACLE_BASE/db_1
LD_LIBRARY_PATH=/usr/X11R6/lib:$ORACLE_HOME/lib:$LD_LIBRARY_PATH
ORACLE_HOSTNAME=devbi.sigfe2
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/jdk/bin:$ORACLE_HOME/bin:/sbin:$ORACLE_HOME/opmn/bin:$PATH
ORACLE_SID=orcl
JAVA_HOME=/u01/app/installfiles/jdk1.5.0_19
In my pc (windows xp) I can open Essbase Studio console, do the connection to Oracle database, get tables and create minischema, mesures and hierarchies (I can see the preview of hierarchies). Also I can create cubes with EAS and can connect with MAXSHELL to essbase.
When I try to deploy the cube from Essbaes Studio y get the error "Error(1021001): Failed to Establish Connection With SQL Database Server".
The Essbase Studio Log File say:
+12:40:16 07/24/09 (admin-1) INFO Start creating outline in database "5.4.0.41:1423.POC_ESS.POC_ESS1"...+
+12:40:16 07/24/09 (admin-1) FINA Sign on Essbase by CSS token "5.4.0.41:1423" successfully...+
+12:40:16 07/24/09 (admin-1) INFO Start building dimension "DM_CIUDADES" ...+
+12:40:16 07/24/09 (admin-1) MÁS FINA Start creating rule file ...+
+12:40:16 07/24/09 (admin-1) INFO SQL statement has been created and put into rule file "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+
+12:40:16 07/24/09 (admin-1) INFO The query is "SELECT (CONCAT('reg_',CAST(cp_105."ID_REGIONPADRE" AS VARCHAR2(1000)))) as "REGION_PADRE", (CONCAT('reg_',CAST(cp_105."ID_REGION" AS VARCHAR2(1000)))) as "REGION_HIJO", cp_105."DE_REGION" as "REGION_HIJO.Default" FROM "POC"."DM_REGIONES_ESS3" cp_105 ORDER BY cp_105."DE_NIVEL" ASC, cp_105."ID_REGIONPADRE" ASC, cp_105."ID_REGION" ASC"+
+12:40:16 07/24/09 (admin-1) INFO Rule file has been created and saved as "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+
+12:40:16 07/24/09 (admin-1) FINA Essbase starts to add members to DM_CIUDADES dimensioin based on the rules file.+
+12:40:16 07/24/09 (admin-1) ADVERTENCIA (1021001): Error al establecer conexión con el servidor de bases de datos SQL. Consulte el registro para obtener más información.+
+12:40:16 07/24/09 (admin-1) ADVERTENCIA essbaseDriver.FailedToBuildDimensionException+
+12:40:16 07/24/09 (admin-1) GRAVE Unexpected exception in EssbaseExport prevented cube from being deployed+
-------------- Exception --------------
com.hyperion.cp.datasources.export.essbase.EssbaseDriverException: Failed to deploy Essbase cube
Thanks in advance to all that have any idea to help me to solve this issue.
A.S.

Hi,
If you type database SID in lowercase, try to reenter iot in uppercase. Strange, but I and my colleagues encounter this behaviour many times.

Network Communication Error in Essbase Studio

Hi All,
I added one property in server.properties file in Essbase studio with the below line
server.essbase.streamingCubeBuilding=true
After that I restarted the Essbase Studio services to get that property into effect which was available in the below mentioned path
//MIDDLEWARE_HOME/user_projects/epmsystem1/BPMS/bpms1/bin/
However after restarting the services,I am not able to conenct Essbase Studio and facing some below error;
error connecting to essbase studio server
Reson : Network Error
Network communication with the server failed.Check your network connection and try again.
Connection refused : connect
Can someone help me out to resolve this issue
Thanks,
RV

Issue is resolved.
We need to restart the Essbase Studio services with Administration priveleges.
Thanks,
RV

Essbase studio drill thru report Test error

Similar Messages

Maybe you are looking for