Essbase System 9 install issue

Hello,
I downloaded the Essbase System 9.3.1 from the Oracle site. All the installation went fine. I started Essbase and the Administration Services fine. But when I go to the Configuration Utility to configure Administration Services, I get the following error message "Registration Parameters cannot be validated successfully". I am using the ID admin and the Password as password, but I get the same error message.
Can anyone please help?
Thanks in advance.
George

George ,
There are 3 steps
1. configure database
2. register with shared services
3. deply to app server
admi , password should work in the next window
next , you select the database of DB2 , SQL server or oracle
I think, you pay more attention in providing correct database configuration details .
Check the port number ,re check the database name and the user name ,and whether this user has required prevelages
Then also check whether the TCP/IP protocol is enabled
Hope this helps.
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

Similar Messages

Multiple system install issues

I recently felt sorry for my back, and purchased a small lightweight laptop to use when traveling. I installed CC for Teams, but when I went to use Acrobat, I got a message that I already had active too many systems. I normally use a heavy laptop at work (personal), and a desktop at home. I can only use one system at a time, obviously. I thought I could use this wherever I needed to.
Is the issue just one of signing out and signing in again?
Stephen

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
Remove license on a computer http://forums.adobe.com/thread/1442423?tstart=0 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

PowerBook G4 Install Issue - Still waiting for root device

Hello Everyone and thank you for reading this post.
I have a last generation PowerBook G4 which I wanted to give to a family member since I've upgraded to a newer MacBook Pro.
I started by wiping the hard drive on the PB (in Target Disk Mode) using the Disk Utility application on the MBP using a FireWire 400 <-> FireWire 800 cable.
I verified and repaired the PB HD, no issues found... but that's when things started going bad. I'm unable to boot from the Tiger Install DVD when I restart the PB (holding down C). I get as far as selecting the language, at which point the mouse/trackpad work for a second before freezing up. I'm not able to select a language and that's as far as it goes.
I've also reset the ram and pram (ald+cmd+r+p) with no luck
My latest attempt has been to use the MBP's Disk Utility to partition the HD on the PB (over FireWire) and I also created a Image of the Tiger Install DVD on my MBP. I used the Disk Utility option "scan image for restore" and it checked out ok.
After successfully creating 2 partitions on the PB HD and using Disk Utility to Restore the Tiger Install DVD image to the smaller partition (10GB), I booted the PB holding the Alt key. As expected it found the Tiger Install DVD image on the HD, I clicked the arrow to continue.
At that point the grey screen with the apple logo appears and after a while it changes to a "forbidden" sign. Not getting much information from that I rebooted in Verbose mode (Cmd+V) to see what was going on. The attached image is what I see, unfortunately I don't know much about what it is telling me.
Lastly, I thought the RAM might have gone bad and so I removed one of the 2 ram sticks with no luck. I haven't tried the other RAM stick on it's own yet.
I know this community is full of smart people that might have some suggestion as to what is going on. Here is hoping someone has an idea to help me along.
Cheers

Hello Dalstott;
Thanks for your suggestion and apologies for my late reply. You're right, I hadn't been paying attention to the partition scheme.
I repartitoned the hard drive (this time watching out for the partition scheme) and tried again, however I'm not out of the woods yet.
With both partitions properly formatted, I restored to the Tiger install DVD image on the smaller one and booted from it.
I booted in Cmd+V mode to see what was going on and it seemed to be doing ok, then the screen switched from the verbose output over to the language selection (beginning of the operating system install). However it will get stuck there within a few seconds. The mouse is initially responsive, but after 3-5 seconds the cursor (and keyboard inputs) freeze.
I've tried now a couple of times to click through as many menus as possible before the keyboard/mouse inputs freeze. Sometimes, I get as far as selecting the hardrive to install the operating system on before the clock runs out.
Any idea whould could be going on? Could this be a RAM issue?
Thanks for your advice.

Mac OSX: Flash CS3 Font Install Issues

Hi,
I have a Mac Powerbook G4 with OS X installed and Adobe CS3.
I've installed a font. The font works in Photoshop and Illustrator
but not in Flash CS3. Why? I've put the font in the Library/Fonts
folder and the User/Fonts folder and it still doesn't show up in
Flash. Apparently this is a problem for a number of people see
another forum here:
MAC
OSX: Flash CS3 Font Install Issues Forum
Please let me know what to do to fix this. I need to be able
to work with the font in all three applications Flash, Photoshop
and Illustrator.

Hi davidd61713525,
Sorry for not getting back to you sooner.
Unfortunately, it looks like something is wrong with the file system and the installer can't see the root drive to install to. A Google search returns numerous results affecting various products and the recurring theme is that something is wrong with the disk. There are many recommendations from various sources, but nothing definitive.
Here's a similar thread over on the Apple forums:
Broken Installer Permissions | Apple Support Communities
And a similar older one:
http://forums.macrumors.com/showthread.php?t=1203509
I would try the following options:
Try using the PKG installer. This is used Mac SysAdmins to install Flash Player within their organization and uses a slightly different installer path, which may or may not work.
Some people have had success with disk and permissions repair some have not. You can try running a disk and permissions repair. After the disk and permissions repair is complete, reboot the system and try to install again using either the online installer (get.adobe.com/flashplayer) or the offline installer, posted at the bottom of the Installation problems | Flash Player | Mac page in the ‘Still having problems’ section.
If these options do not work, I'd reach out to Apple support to see if they have a suggestion. If you do find a resolution to this, please let me know. I'll be happy to share it with people that encounter the problem in the future.
Maria

ES11X-G4-H essbase export adapter issue

Hello,
i have this problem with essbase export adapter for FDM:
When i perform export step everything seems to be fine but /APPS/myFdmApp/myFile.dat doesn't contain records that i can find with both on web interface and with a query on oracle fdm's system views "VDATAFACT" or "VDATA" (on repository database).
No errors or reject records infos are shown nor in fdm neither in essbase (system and app) log.
This happens with very large input file (300mb). Anyone has some ideas on what's happening?
Thank you in advance,
Daniele
FDM: v11.1.2.1
EsbAdapter: ES11X-G4-H
S.O.: Win2008 SE R2 (x64)
RDBMS: Oracle 11.2.0.1.0 (on linux)

I've opened a service request. Here it is the last message i got from them. Please note that this SR had lasted over 2 month.
What they say basically is: it doesen't work but FDM is not designed for big amount of data, so we are not going to fix it.
Which is the max filesize handled by FDM is unknown....
Daniele
Hi Daniele,
Good Morning!
I tried to Reach you on the Number Mentioned in the SR.We Discussed This Issue With the Product Specialist and They have Suggested Not to Use 200Mb File, because it is too Big for FDM to Handle it, Please Try to Split the File and Load it, FDM is not a ETL tool to Handle Such big File.Please let me know if you want anything Else on This.
With Regards,
xxxxx.
Hello xxxxx,
could you please provide me the max file size handled by fdm? I'd like to have some docs on that also.
regards,
Daniele
Hi Daniele,
There is No Limitation as such FDM is not designed to load Millions of records. It's a End user fiinancial tool, not designed to be used as an ETL tool, so there is not a restriction per say, but it's not designed to be used in that manner.
With Regards,
xxxxx

Re-Installing Issue

Hi,
I have a G5 I had to re install and erase my HD cause I had issues, now that i am rebuilding the system it won't let me install FCS, I get to the DVDP disc and it says Installation failed.... I tried it a few time and I get the same error. Can anyone shed some light on this please?
thanks
P

Welcome to the forum!
Made sure the disks are clean? I'd call Apple on an install issue if it's new or if you suspect a damaged disk and you're the registered user.
Which OS are your running? QuickTime Version?
Jerry

System Install Problems

Hi
I am reinstalling my mac mini with the system install disks (10.4.5). The first disk works fine. I am then asked to insert disk 2 though my mini refuses to recognize the disk as the correct disk. One of my friends has an identical model - bought at the same time - I tried using his disks and encountered the same problem. I'm unable to do anything as the mini will not let me out of this screen.
Any suggestions of what to do?
Mac Mini Mac OS X (10.4.5) Can't remember the exact specs of my machine - it was the very first intel model, core duo.

Hi, I'm having the exact same problem reinstalling tiger on my mac mini, stops at the 2nd disk. Did you resolve the issue or find a solution?

Essbase System 9 or above will be supported running on Windows 2008

Essbase System 9 or above will be supported running on Windows 2008, I am planning to upgrade our system from 7.5 to System 9, Please let me knwo system requirements for Essbase System 9
Thank You

You can read abour System Requirements in the Install Guide Chapter 3 :
http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_1.htm

RV220W System Time Issue in Combination with WiFi Active Time

Hi
Have system time issues with rv220w!
Setup:
Note that the real time is 17.32 (bottom right) but the system time is 16.20, result 1h offset (sad that the possibility to configure summertime start/end is missing)
Setting up the WiFi active time from 5.30PM until 6PM (testing only):
Note that the real time is 17.44, the WiFi is "Disabled". The RV220W system time is 16.44 with setting "CET +1h".
BUT:
Even when i change the RV220W system time to a Time/Date offset GMT +2h EET has this no issue to the WiFi time profile i set up. The WiFi stay down.
Note:
The WiFi Active Time Settings only working correct when the Clock Source is setting up with "Set Date and Time Manually" (in "Administration" "Time Settings"), but that is not the way.... i don't like to configure time settings manually (no system administrator will do that tinking)
Conclusion:
I think that the WiFi Time setting does not work fine, mean that the WiFi does not include the configured offset as usually system does....
Further:
RV220W firmware is up to date....
Hope Cisco will fix that and add the summer time feature (like in other systems and other manufacturer) in the next FW.....

GJinAmsterdam wrote:
I have a MacBook upgraded from Tiger 10.4 to *Snow Leopard OS X 10.6.1.* I'm now using *Time Machine* to make back-ups on a *MiniMax external drive* through an USB connection. However, I wish to make wireless back-ups by connecting the external drive to my *Airport Extreme*. I learned that this wasn't possible until the recent release by Apple of the software update "*About Time Machine and AirPort Updates v1.0*".
this has been possible for a long time, since about February 2008 when those updates came out.
The minimum system requirement for this software update is OS X 10.5.2. I should think this requirement is met because I have upgraded to 10.6.1. But when I try to install the software I get the message that the system requirement is at least 10.5.2. and as a result *I can't continue installing*. Apparently my OS update is not recognized by the software. Is there a solution for this problem? Many thanks.
you don't need to install those updates. they are for leopard, not snow leopard. you should be fine as is. do keep in mind that TM backups to air disks are not "officially" supported but they have worked for a long time. also, keep in midn that you'll need to start a new backup sequence once you move the drive to AEBS as remote backups are stored differently from directly attached ones.

Combine fresh system install and Time Machine Backup

Hi all !
There´s a question that´s more generally Leopard and Snow Leopard related:
In trying to find causes of a system slowdown I decided to go for a complete fresh system install. BUT I also want to use my data saved in the time machine backup without spoiling the freshly created system folder.
I also want to update the system to the current OS version before restoring from BU.
Is there a way to keep the fresh system folder deriving from a fresh installation and just replace the rest of the data (that´s not present yet) with the time machine backup ?
I think the handy command "Restore System from Backup" from the OSX system installer wouldnt be a good idea. It would copy ALL the files from the backup, and would overwrite my fresh system folder, so that I´ll end up with the same old, probably faulty system.
Could the migration tool do the job ?
Thanks for your knowledge !

habschi2 wrote:
In trying to find causes of a system slowdown I decided to go for a complete fresh system install. BUT I also want to use my data saved in the time machine >backup without spoiling the freshly created system folder.
You should be able to migrate, for example, just your data using TM. But, TM is a bit unpredictable. Why not make a bootable clone of your internal on an external. It would serve fail-safe purposes, migrations purposes, and data-backup purposes. At the end of your install, you could, as groups only, migrate your data, users, settings, and apps--using your discretion. I would migrate only my data and my settings.
Is there a way to keep the fresh system folder deriving from a fresh installation and just replace the rest of the data (that´s not present yet) with >the time machine backup ?
See above.
I think the handy command "Restore System from Backup" from the OSX system installer wouldnt be a good idea. It would copy ALL the files from the backup, and would overwrite my fresh system folder, so that I´ll end up with the same >old, probably faulty system.
Absolutely correct.
Could the migration tool do the job ?
You can use Migration Assistant with TM, but I have never done so. So, I can't advise. The clone I mentioned takes care of all you issues in a very straight forward manner without dealing with the confusion of TM and MA that can arise.
(8878)

Can' t read disk label, install issues

can' t read disk label, install issues
i am trying to install solaris 8 on a sparc5 (256mb, 4.2gb,110mhz). i initially installed using the installation disk and it seemed successful as i was able to load the rest of the cds. something went wrong though b/c the system is stuck in a rebooting loop after it finished the last cd. so i went searching and found that i could only have a root partition of no bigger than 1gb. since i used the installation disk, i was not given an option to specify slice sizes. so now, i am trying to redo the install starting from the first disk (1 of 2) and skipping the installation disk. when i do a "boot cdrom" with the 1 of 2 disk, i get the cant read disk label or something about short entry and it will not boot. i am using actual Solaris 8 cds and not downloads. what can i do to get it to boot up from the first disk, or fix the partitioning on the disk?

I am using the offical Solaris 8 Installation 2/02 for SPARC Platform Edition for Sun Computer Systems February 2002, Revision A
Output from the probe-ide command follows:
device 0 (Primary Master)
ATA Model: ST3160023A
device 1 (Primary Slave)
Removable ATAPI Model: LTN4865
device 2 (Secondary Master)
ATA Model: ST340016A
device 3 (Secondary Slave)
not present
device 0 is the new hard disk that I just installed
device 1 is the CDR drive
device 2 is the original hard disk. I can boot this but now get some magic disk errors or something like that
device 3 is not present
I have all devices set to cable select according to the manual.
Thanks for your help...
Tom

Macbook circa 2010 w 2 Systems installed - 1 incomplete

Hello,
Looks like I squeezed the gist of the problem into the subject line. This is my wifes computer so information is limited on 'what happened'. I do not know how the second system got on the HDD, but it is incomplete and is somehow booted to occassionally. When it's the boot drive there are numerous issues due to the incomplete nature of it. Holding the 'R' key on start up or using system preferences > start up disc both work for booting to the correct disc.
It just occurred to me that perhaps the HD is partioned - hmmm - would Disk Utility tell me / show me whether or not the HD was partioned? Guessing it must be in order to have two systems installed. I suppose in this case the HD would require a full erase to rid it of the partial system?
I feel like I'm answering my own question, but having the pro's opinion is always a good idea.
The question is how can I remove the offending disc (system)?

Guess I'll have to take a closer look at 'just deleting' a partition - didn't know you could do it. Assuming if the one is deleted then it's space is absorbed into the remaining partition?
I'm using CCC to transfer to a network volume - used to be my Time Machine backup but Apple and Buffalo technologies diverged and things are no longer compatible for TM - now I just afp to it and use CCC for occassional stuff like this.
I've always been 'quirky' about erasing when things don't resolve with permission repair or Applejack or even Disk Warrior. The thinking is that erasing will get the bug where ever it is.
P.S. Managed to delete the one partition (150GB) but the remaining (100GB) can't be enlarged or so it seems.

G510 - System Slowness Issue

I'm having G510 laptop. I'm facing system slowness issue. Frequently facing this issue for all apps, taking too much time to load/open as compared to the normal speed. Restarting the machine also taking 10 mins to bootup again. And getting blank screen too. Please someone help me on this.

Hmmm.... Download and run Process Explorer from Microsoft Technet. Look at running processes and what they are attached to. Google anything that you are not familiar with, look for associated programs and remove any that are not Lenovo Tools, Microsoft Authored or programs that you have personally installed.
Look at running programs (system tray) and see what is running in background. Google Update, Java Update and similar can tie up resources and slow down the computer.
Lastly - Download and run Malwarebytes, do a deep scan for root kits and other nastiness that may be lurking around in your file system.
Good luck.

My iMac computer was recently worked on and in the process it was completely stripped down and new operating system installed.

My iMac computer was recently worked on and in the process it was completely stripped down and new operating system installed.
OS X Yosemite version 10.10.1.
After this trip to be serviced, when I try to open Photoshop, I get a message "Licensing for this product has stopped working".
At the bottom of the error window, Error: 150:30
If you continue to see this message after restarting your computer, please contact Adobe technical support for help.
Any help resolving this issue would be greatly appreciated!
Thank You,
joe

Error "Licensing has stopped working" | Mac OS

In my Macbook Pro, on a few occassions, the apple menu bar blacks out. its displayed as a negative image. The desktop wallpaper get greyed out and i get a blank screen as wallpaper. No idea why this happens. I reset the system and issue gets resolved.

In my Macbook Pro, on a few occassions, the apple menu bar blacks out. its displayed as a negative image. The desktop wallpaper get greyed out and i get a blank screen as wallpaper. No idea why this happens. I reset the system and issue gets resolved.

AshwinVC wrote:
I reset the system and issue gets resolved.
How?

Essbase System 9 install issue

Similar Messages

Maybe you are looking for