Essbase terminating session "MDX report" request

I have an essbase "terminating " status session with MDX report request ( ASO ).
I tried to force " Logout" and "Kill" still does not work.
Please help

You'll have to kill that using task manager (if on windows) on Essbase server. On task manager, go to View->Select Columns select command line. This will show you which application is EssSvr.exe is associated with. kill that process.
if on *nix use ps and see what the pid is and kill the process.
Regards
Celvin Kattookaran

Similar Messages

Formatting MDX report,Error=One or more axes in MDX query have been skipped

Hi All
Need to show the measures on row-ways instead of Column-ways in MDX report. Able to generate report with measures Column-ways.
Getting error when tried the following:
#) when used "{} On Rows" instead of "{} On COlumns".
ERROR - 1200545 - One or more axes in MDX query have been skipped.
ERROR - 1241101 - Unexpected Essbase error 1200545.
If anyone faced something like this before, please share some work-around.
Thanks & Regards
sharma

Hi,
Take a look at this SAP Note: 1580524 - Xcelsius Dashboard does not display variable popup
Also go through the below discussion, it may help you.
Bex Variable PopUp does not come up launching Xcelsius dashboard
One or more mandatory variables of query XXX no... | SCN
Bex Variable PopUp does not come up launching Xcelsius dashboard
BICS - Passing Mandatory Filter Variable value to a BEx Query
Passing parameters between XCelsius dashboards using BI direct connection
Hope this helps brother.
Regards,
Suman T

Essbase Studio Drill-Through Report

Is it possible to run an Essbase Studio drill-through report in a SmartView spreadsheet that is connected to a cube that was not deployed by Essbase Studio? If so, how do you associate the drill-through report with the cube?

You have to trick Studio into thinking the cube was built from Studio. In my session on Advanced Studio Tips and Tricks at the KScope conference at the end of June I detail a couple of ways to do this. It is too detailed to put into a post here

Hanging Report Requests

Report Requests Hang on page no. 482 when reports is more than 480 pages
Reports with 410 pages is generated ok.
When I terminate the job I got the following
Terminated with error REP: 56048: Engine rwEng-0 crashed
I have tried all what exist on the net about this problem without success
Thanks in advance (TIA)

Hi,
I missed this
jvmOptions="-Xms512m -Xmx512m -Xss2m"
That solved the problem

Terminal sessions dropped

A customer has the following conf.
Two sites connected with a VPN through internet .
On site A there's a Win2k Server with terminal services. Users on Site B connect via RDP but after 10minutes ( even working ) the session is disconnected.
Between the two sites a tunnel has also been defined to manage a ISDN dialup backup line .
Anyone has any idea ?
thanks

try scaling down the mtu size on the client
use the VPN client > Set MTU option
or do it in the registry
if you can still browse web pages on the internal network even after the TermServer has kicked you off, then the mtu may be the culprit. try setting it to a lower value. Also try setting the RDP Properties for the connection down to 56K (play with these settings first, they may make the difference). Terminal Sessions use bigger packets than HTTP Request and Response traffic.

Auditing report requests

Dear all
Is there a way of automatically recording basic report request information whenever a report is run (through RUN_PRODUCT), e.g. username, report name, time of logon, etc.
My first thought was to use V$SESSION in an AFTER LOGON trigger, but my first problem is that columns PROGRAM and MODULE are NOT POPULATED for sessions run from the client.
DBMS: Oracle 8.1.7
Reports 6.0.8.13.1 (run client-server)
Any advice gratefully received.
Regards
Andrew Hunter

Hi Andrew
Report server maintain a queue for past jobs which can be also store in a databse table. This information would have the report name, time it started, finish time etc. You need to enable database repository in report server config file. Please refer the 6i publishing report manual at otn to find out details of this feature.
Thanks
Rohit

How to track the flow of Sharepoint SSRS report requests to troubleshoot slowness

How to track the flow of requests of Integrated SSRS report links in Sharepoint.
We are using SSRS with Sharepoint for reporting purpose. The issue is some of the reports get generated fast and some other reports generation is very slow. When the sql query of these reports RDL file is executed, the records are shown fast.
Also even on clicking the "Add Subscription" link of "Manage Subscriptions" of a report is very slow for some reports, while it is fast for other reports.
I tried enabling SQL profiler to track the requests. I have checked profiler log for the SQL statements with exec sp_executesql. But they are not helpful.
Pls advice on how to track the request of flow of SSRS report request in sharepoint and how to troubleshoot the slowness in "Add Subscription" link, response of some reports.

Hi Pradeesh,
According to your description, my understanding is that you want to track SharePoint SSRS report requests to troubleshoot the performance.
Developer dashboard is very help full while troubleshooting the issues related to performance in SharePoint 2013. You can have a try.
About Developer dashboard, you can refer to the links:
http://www.sharepoint-journey.com/developer-dashboard-in-sharepoint-2013.html
http://msdn.microsoft.com/en-us/library/office/ff512745(v=office.14).aspx
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Job terminated in source system -- Request set to red,SAPSQL_SQLS_INVALID_

Hi All,
can any one help on this issue.
I run the BI statistics in production and found out the error while triggering the delta's
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Error msg : Job terminated in source system --> Request set to red
Message no. RSM078
Job started
Step 001 started (program SBIE0001, variant &0000000000756, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0TCT_DSA1
RLOGSYS = BCLNT300
REQUNR = REQU_D4GZHNLA3PSQ7XRNGL0EMV6AP
UPDMODE = D
LANGUAGES = *
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 0 *
abap/heap_area_total.......... 2147483648 *
abap/heaplimit................ 40894464 *
zcsa/installed_languages...... ED *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 3000320 *
ztta/roll_extension........... 2000683008 *
ABAP/4 processor: SAPSQL_SQLS_INVALID_CURSOR
Job cancelled
But delta laoding for same is working in DEV...but not in prod...
Please suggest
Regards
Shweta

Swetha
finally found out the notes.
Please look into them and ask you basis to implemnt,
1161940
1106569
1145041
1146851
Please have a look and ask for implemtation in your system which are suitable for you
We also faced the same issue job termination in source system for BI Statistics
Regards#
Srini

Windows terminal sessions not logging off

Hi All,
I am new to SDG and hoping someone could shed some light on a issue i'm having with applications running on a windows terminal server.
When i launch a windows application through SGD, it opens and works fine. When I close this application and session, it seems that the terminal session is still being held. Why does it not log off? Is there a SDG setting?
Any help would be appreciated.
Jason

It looks like a process/application running in the background is keeping the session open.
Please take a look at the following section from the administration guide:
http://docs.sun.com/source/820-4907/chapter4.html#Z40000061308259
Greetz,
Remold

Essbase studio drill thru report Test error

Hi All,
Essbase studio drill thru report is producing the below error: Unable to retrieve drill thru result.
Error in the select statement. Line = 2466.
Error in query execution. Please review the query and try again.
Cannot execute a SQL query
ORA-01791: not a SELECTed expression
Any idea... i am able to test for some of the dimensions but this error is coming for a few dimensiosns .... i verified all the joins between dimensions and facts.. everything is fine.
Thanks,
Praveen

Hi Glenn,
This is a test report executed with in Studio console. Yes, i did verify the generated sql by studio server and was able to drill down to the detail. I dont find any information in the logs when testing this. Probably, i would need to increase logging level. Will do that and update here if i dont find much help there.
Thanks,
Praveen

Essbase Studio drill thru report error

Hi All,
Essbase studio drill thru report is producing the below error: Unable to retrieve drill thru result.
Error in the select statement. Line = 2466.
Error in query execution. Please review the query and try again.
Cannot execute a SQL query
ORA-01791: not a SELECTed expression
Any idea... i am able to test for some of the dimensions but this error is coming for a few dimensiosns .... i verified all the joins between dimensions and facts.. everything is fine.
Thanks,
Praveen

Hi Glenn,
This is a test report executed with in Studio console. Yes, i did verify the generated sql by studio server and was able to drill down to the detail. I dont find any information in the logs when testing this. Probably, i would need to increase logging level. Will do that and update here if i dont find much help there.
Thanks,
Praveen

Published report requesting DB Login for Dynamic Parameters - V2008

I have a report that is setup as a main report with many sub-reports. The Main report request a set of parameters all are dynamic and 4 are cascading. The sub-reports access one of 2 database connections and the dynamic paramters come from only one of those.
It works fine in design mode and asks for the DB Credentials only once, but when I published it (Crystal Reports Server 2008) and I set the default DB Configurations (I make sure the Use same database logon as when report is run is checked) , it still prompts for the DB Login in InfoView when you go to View the report, but only the connection for the dynamic parameters.
Have I just totally confused Crystal or is there a setting I am missing.
Thanks,

Bumping this to the top since I have not received any replies.

Submiting Report Request via DB Proc.

Hello,
Is there a way to submit a report request to the report server via a database procedure?
I have a situation where depending on the report name, userid, email addr, report-parameters, frequency etc. stored in a table, the database procedure SHOULD send the report request to the report server.
Any help is appreciated.
Thanks
Manish

If you are running 7.3.4 or later of the Database, you can do this.
First, set up reports for web reporting - i.e. you are able to run a report by submitting a URL (see the Reports Server configuration whitepaper on OTN and the doc. if you don't know how to do this).
Then, check out the Oracle7/Oracle8 Application Server guide - there is a db package called UTL_HTTP which will allow you to call a URL from a stored procedure - which is all that is needed to run a report from a stored procedure! Simply build the URL up and submit it. If you have Reports 6.0 patch 1 or later, you also have access to the Reports Server queue in the database, so you can programatically check the status of the job just submitted (use the JOB= parameter to uniquely identify your job).
Regards
The Oracle Reports Team http://technet.oracle.com

Using Planning vs Essbase connection in financial reports

What are the pros/cons of using an essbase connection for financial reporting vs using a planning connection? we are on 9.2.1. using the Financial reporting studio client. These are basic financial reports-cost center expense reports, income statement, revenue analysis, etc.
I notice that when I use a planning connection, I cannot select any attribute dimensions in my financial report.
Also, are there any differences in the security used with a planning connection vs an essbase connection
Thanks
Jeff

-- "I notice that when I use a planning connection, I cannot select any attribute dimensions in my financial report."
you can select any attribute (see WorkSpace->File->Properties->Financial Reporting...)
-- "Also, are there any differences in the security used with a planning connection vs an essbase connection"
there are not big differences.
We use planning for most of our reports. If report is very big (many rows or lines) we use financial report.
Edited by: brdmike on 04.12.2008 7:48

How to use Session Key-based Request Targeting Mechanism in OCCAS ??

I read Session Key-Based Request Targeting(chapter 5) in Developing SIP Applications.
But, I don't work my application using this mechanism.
I add sesssionKey function with @SipApplicationKey annotation.
I deploy this application. And then, other machine send INVITE request.
My application received INVITE request. But sessionKey function is not called before doInvite function is called.
I used @SipApplicationKey(applicationName="...") annotation.
It didn't work.
sample code is following.
Could someone help me?
import javax.servlet.ServletConfig;
import javax.servlet.ServletContext;
import javax.servlet.ServletException;
import javax.servlet.sip.SipFactory;
import javax.servlet.sip.SipServlet;
import javax.servlet.sip.SipServletMessage;
import javax.servlet.sip.SipServletRequest;
import javax.servlet.sip.SipServletResponse;
import javax.servlet.sip.SipURI;
import javax.servlet.sip.URI;
import javax.servlet.sip.annotation.SipApplicationKey;
public class app2SipServlet extends SipServlet {
private static final long serialVersionUID = 1L;
public static SipFactory sipFactory;
public static ServletContext sc;
public void init(ServletConfig cfg) throws ServletException {
super.init(cfg);
sipFactory = getSipFactory();
sc = getServletContext();
trace("+++ app2SipServlet Initialization");
@SipApplicationKey
public static String sessionKey(SipServletRequest req) {
String appid = req.getHeader("ApplicationID");
System.out.println("application id : " + appid);
return appid;
@Override
public void doRequest(SipServletRequest req) throws ServletException, IOException {
trace(req, "doRequest()");
super.doRequest(req);
@Override
protected void doInvite(SipServletRequest req) throws ServletException, IOException {
URI from = req.getFrom().getURI();
String user = ((SipURI)from).getUser();
trace(user + " : " + req.getSession().getApplicationSession().getId());
trace(user + " : " + req.getSession().getApplicationSession().getApplicationName());
SipServletResponse resp = req.createResponse(200);
resp.send();
trace(resp);
}

How many servlets you have defined in your sip.xml .If there are multiple you may want to check if
-- You have defined main-servlet ?
-- or Is deployment descriptor version 1.0 or 1.1

Essbase terminating session "MDX report" request

Similar Messages

Maybe you are looking for