Essbase wouldn't start after change domain

hi,
i'm during migrating Hyperion Planning 11.1.2.1 servers to new domain. And i thought this process would be easy.
But it isn't.
So firstly Essbase server didn't start. I recieved message "error initializing network:" and "Unable bind ...". How to fix it ?
secondly i tried run EPM System Configurator but app closed by some error. So my question is where is log file this application ??
i am looking forward your advice.
tb

thx,
i found logs. i think that error is consequence of changing domain, but how to correct this.
i've 3 server: A - Essbase (error), B - foundation, shared services and other and C - planning, odi
so where i have change configuration with new settings ??? Am i using EMP System Configurator or how check setting of current system ?
would you like to help me ?
TB

Similar Messages

  • MacBook Pro won't start after changing RAM cards; just beeps.

    MacBook Pro will not start after changing RAM cards.  It just beeps; then I force it to quit.

    The three things that come to mind immediately are that the RAM card isn't seated properly (you should hear or feel a click when it is seated), the RAM is bad or marginal for that Mac model, or you didn't get the correct RAM type.

  • Service for listener can start after change ip of machine

    Hi,
    I have installed Oracle 10g, which installation was done from the other person which is not part of the team, my experience with Oracle is little.
    We executing our automation tests on Vshere machine and our sysadmin had to change to a new hardware and after this move to change IP of the machine.
    On a machine it has installed microsoft loopback adaptor, also in host files are added iP 10.10.10.10 host of the machine with domain and only host name.
    in tnsnames.ora are used host names no IP addresses. After change of IP i loads first page and when i have tried to login in Enterprize manager can't open next page.
    I checked windows services and i found that oracle listener was stopped when i have tried to started it shows this error: "The nameof listner service on Local computer started and stopped. Some services stop automaticly if they are not use by other services or programs", Oracle Fulfillment Server failed with the same error when i have tried to start this service. Also OracleConcMgr raise error whrn i have tried to run service with this error 1067: The process terminated unexpetedly
    I ewxecuted command lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.1.0.5.0 - Production on 25-JUN-2012 14:53
    :45
    Copyright (c) 1991, 2004, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.1.0.5.0 - Produ
    ction
    Start Date 25-JUN-2012 14:01:09
    Uptime 0 days 0 hr. 52 min. 38 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\PROD\inst\apps\PROD_\ora\10.1.
    2\network\admin\listener.ora
    Listener Log File C:\oracle\PROD\apps\tech_st\10.1.2\network\log\listene
    r.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=
    1521)))
    The listener supports no services
    The command completed successfully
    Thanks in advance if you can help me. if you need more info write me

    Solution:
    I secured Enterprise Mangager (HTTPS, emctl secure...).
    First, I must unsecure EM-Console, run "chgiphost.sh -mid" and then re-secure EM-Console.
    Look at: Metalink - Note 280034.1 How to Secure and Unsecure the AS Control 10g Console
    regards
    Harald.

  • VG224 - some ports show "unregistered" after changing domain name

    hi,
    recently i have changed the domain name of a VG224, before the change, all ports shows "registered" from the CUCM.
    after I changed the domain name from VG224 and CUCM, the VG224 can be registered to CUCM, and some ports can register too...only serveral ports showing "unregistered" in the CUCM. But from the VG224, everything is normal. and call/ fax can be made successfully from those "unregistered" ports.
    anyone has idea what's going on?
    thanks.

    Melany,
    Sorry for the delay,
    I have had a look at bugs etc.
    The only one I can find that may be related is:-
    Change MGCP gateway Domain Name only reset endpoints not whole gateway
    CSCsg39923
    Description
    Symptom:
    Incoming and outgoing calls over an MGCP gateway fails randomly after changing gateway's domain name in CallManager. Sometimes caller receives dead air.
    Conditions:
    The administrator changes the gateway domain name in CCM without stopping Gateway's mgcp service.
    Workaround:
    Reset or reload the gateway.
    Further Problem Description:
    The proper way of changing a gateway's domain name is:
    - Stop Gateway's mgcp service (gateway command: no mgcp)
    - Chnage the domain name in the gateway and in CCM.
    - Start Gateway's mgcp service (gateway command: mgcp)
    Customer Visible
      Save Bug
    ">
    Save Bug
      Open Support Case
    ">
    Open Support Case
    View Bug in CDETS
    ">View Bug in CDETS
    Was the description about this Bug Helpful?
    (0)
    Details
    Last Modified:
    Nov 2,2012
    Status:
    Fixed
    Severity:
    3 Moderate
    Product:
    Cisco Unified Communications Manager (CallManager)
    Support Cases:
    2
    Known Affected Releases:
    (1)
    4.2
    Known Fixed Releases:
    (4)
    6.0(0.9901.37)
    6.0(1.1000.37)
    7.0(0.99999.65)
    1.0(0.98000.42)
    Download software for  Cisco Unified Communications Manager (CallManager)
    Support Cases:
    (2)
    Support case links are not customer visible
    Related Bugs
    Bug(s)
    Community Discussion on CSCsg39923 - Cisco Support Community
    Regards,
    Alex.
    Please rate useful posts.

  • My Mac Book Pro wouldn't start after memory update

    I updated my 27" Imac memory up to 16 GB, so I was encouraged to do the same with my Mac Book Pro after watching the video and instructions. However My Mac Book Pro wouldn't start afterwards. It is driving me crazy. Please if someone can help me on this. Thanks

    I was trying to install Corsair 8GB (2x 4GB) 1333mhz PC3-10666 204-pin DDR3 SODIMM Laptop Memory Kit CMSO8GX3M2A1333C9; and now I realized that I made a mistake because this Mid 2010 Mac Book Pro uses 1066mhz PC3 8500 instead, so should that be the problem of compatibility? I should guess so, although in my HP Elite I have 800Mhz ddr2 where the bus works at 640 mhz ddr2.
    The rest is the same being 204 pin memory cards, etc.
    I made this mistake because ordered at the same time this memory along with memory cards for my new 27" iMac, which works at 1333Mhz.
    Thankyou again, I will check on if cards are sitting well and if they are PC3 8500 1066 Mhz....

  • IPod Touch (4th gen) wouldn't start after overheating from an after market wall charger

    My son used an after market iPod charger and after a few minutes after he unplugged the cord the iPod wouldn't start. More than that: it was getting hot even without beeing hooked to the charger. After 30 min was back to normal temperature but it wouldn't start.
    Any hope to get it running again? The On/Off + Home reset didn't worked.

    - Synced media like apps and music are no included in the backup that iTunes makes. If that media is not in the iTunes library it will not be on the iPod after restoring from backup or updating.
    - Redownload your purchased by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Then try restoring from backup. If you have a backup made when the iPod was update then you should get your apps data back. Go to iTunes>Preferences>Devices and see if by the date of the backup it would included the data.

  • Modeler problem after changing domain name

    Hello GURUS,
    I had my BI7 on RHEL5 and MaxDB configured and working with hostname xxxbwd.yyy.pl. Today I had to change domain/host name to xxxbwd.zzzz.yyy.pl. I've changed it in /etc/hosts, changed profile parameter icm/host_name_full to new value and almost everything works.
    I have problem with starting modeler form t-code RSPLAN - it throws IE error "Page not found" and I can see that "old" domain name is called. Where do I have to type in new domain name to make RSPLAN work?
    Regs,
    FS

    Found it myself.
    Report RSPLS_LAUNCH_ADMIN allows to set such things.
    Regs,
    =FS=

  • Intel imac wont start after changing permission

    intel imac wont start after i changed my hard drive permission to let me read and write, then i clicked apply to all enclosed files.i turned it off no problem. then it never started up again in os x. the grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. i can start up in windows xp, but i dont know how to do anything in windows xp that will affect os x. i can use the hard drive in target mode, but i cant figure out how that can help me. i use a macbook to view target disk. ive spent hours looking through help and support. finally i do not have the os install disks. PLEASE HELP!

    My apologies for the inept instructions.
    Restart normally. Open Terminal in the Utilities folder. Paste the commands in the Terminal application to avoid typos:
    sudo su
    Press RETURN. Enter your admin password when prompted.  It will not be echoed to the screen. Press RETURN again. Now paste each of the following at the prompt and press RETURN after each.
    chown root:admin /Applications
    chmod 0775 /Applications
    chown root:admin /Library
    chmod 1775 /Library
    chown root:admin /System
    chmod 0775 /System
    chown root:admin /Users
    chmod 0775 /Users
    chmod -R -N /Applications
    chown -R :admin /Applications/*
    Again, my apologies.

  • Pb connecting from client to database after changing domain name

    Hi,
    I've got 3 databases wthis 3 listeners. all worked well since we change domain name. database server is in DMZ and is reconize witn 2 IP adresses.
    I can ping with tnsping but when I run sqlplus user/passwd@ORACLE_SID I've got this message : ERROR:
    ORA-12535: TNS : le dÚlai imparti Ó l'opÚration est ÚcoulÚ
    on local host this command run well and connect to database.
    is there somebody that knows this problem and its solution?
    Thank you for your help.
    PS: I'm on oracle 9.2.0 and windows200 server and client

    I've got this message in listener.log
    Démarré avec pid=3028
    Ecoute sur : (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
    Ecoute sur : (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=bam_sgbd.imelios.com)(PORT=1522)))
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    19-MAR-2004 14:21:33 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2032)) * establish * ADRPRODR * 0
    19-MAR-2004 14:34:36 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BAM_SGBD))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=2394)) * establish * ADRPRODR * 0
    19-MAR-2004 14:40:53 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2195)) * establish * ADRPRODR * 0
    19-MAR-2004 14:44:18 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BerPre))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=2809)) * establish * ADRPRODR * 0
    19-MAR-2004 14:57:52 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BAM_SGBD))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=3413)) * establish * ADRPRODR * 0
    19-MAR-2004 15:11:47 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2433)) * establish * ADRPRODR * 0
    19-MAR-2004 15:55:59 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=IP_ADRESSE)(PORT=2561)) * establish * ADRPRODR * 0
    19-MAR-2004 15:56:26 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=IP_ADRESSE)(PORT=2568)) * establish * ADRPRODR * 0
    this seems to work pas on client connection doesn't arrive

  • OEM is not getting started after changing the Server name

    Hello DBAs
    Recently I installed Oracle database 10g on my a windows machine. It was working fine. Integrated OEM was also working fine.
    But now I have changed the machine name. Now Oracle Database has come up after updating the listener.ora & tnsnames.ora files with new server name. But OEM page is not getting open now. I tried after updating the emd.properties and other related file on ORACLE_HOME\sysman folder with the new server name. But no luck.
    In windows services one service named *"OracleDBConsoleDbname"* is not getting started, which could be the issue.
    Can someone please guide me what can be done to fix this problem.
    Thanks
    -Naveen

    Hi Naveen,
    What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
    What action needs to be taken if the hostname or SID of the database server is changed?
    If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
    Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
    And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
    Eric

  • ISE node registering after change domain-name

    At Customer Site I changed the domain name of our 4 ISE server before they were registered to any deployment. I regenerated a self signed certificate and started to register the other nodes to the deployment. This went well for the 2 PSN nodes which have a ip address in a different subnet. I tried to register the presumed secondarry PAN/MnT node and got the following error message "
    Node beiing registerd has FQDN 'ISE-PAN-AP02.office.intern' which cannot be resolved. Please check your DNS configuration."
    My DNS config is in order.
    Can anyone please tell me want possible can be the cause of this?

    Please check these Prerequisites:
    The fully qualified domain name (FQDN) of the standalone node that you are going to register, for example, ise1.cisco.com must be DNS-resolvable from the primary Administration ISE node.  Otherwise, node registration will fail. You must enter the IP addresses  and FQDNs of the ISE nodes that are part of your distributed deployment  in the DNS server.
    •The  primary Administration ISE node and the standalone node that you are  about to register as a secondary node should be running the same version  of Cisco ISE.
    •Node  registration fails if you provide the default credentials (username:  admin, password: cisco) while registering a secondary node. Before you  register a standalone node, you must log into its administrative user  interface and change the default password (cisco).
    •You  can alternatively create an administrator account on the node that is  to be registered and use those credentials for registering that node.  Every ISE administrator account is assigned one or more administrative  roles. To register and configure a secondary node, you must have one of  the following roles assigned: Super Admin, System Admin, or RBAC Admin.  See Cisco ISE Admin Group Roles and Responsibilities for more information on the various administrative roles and the privileges associated with each of them.
    •If  you plan to register a secondary Administration ISE node for high  availability, we recommend that you register the secondary  Administration ISE node with the primary first before you register other  Cisco ISE nodes. If Cisco ISE nodes are registered in this sequence,  you do not have to restart the secondary ISE nodes after you promote the  secondary Administration ISE node as your primary.
    •If  you plan to register multiple Policy Service ISE nodes running Session  services and you require mutual failover among those nodes, you must  place the Policy Service ISE nodes in a node group. You must create the  node group first before you register the nodes because you need to  select the node group to be used on the registration page. See "Creating, Editing, and Deleting Node Groups" section for more information.
    •Ensure  that the Certificate Trust List (CTL) of the primary node is populated  with the appropriate Certificate Authority (CA) certificates that can be  used to validate the HTTPS certificate of the standalone node (that you  are going to register as the secondary node). See the "Creating Certificate Trust Lists in the Primary Cisco ISE Node" section on page 12-24 for more information.
    •After  registering your secondary node to the primary node, if you change the  HTTPS certificate on the registered secondary node, you must obtain  appropriate CA certificates that can be used to validate the secondary  node's HTTPS certificate and import it to the CTL of the primary node.  See "Creating Certificate Trust Lists in the Primary Cisco ISE Node" section on page 12-24 for more information.

  • OAS 10.1.2 / chgiphost / EM-Console doesn't start after change of hostname

    Hello!
    I changed on my OAS 10.1.2 ip-address and hostname with script /$ORACLE_HOME/chgip/chgiphost.sh -mid.
    But I can't start em-console and get the following error in em-application.log:
    Portal Configuration Interface failed to initialise:
    oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: newHostname.domain:cn=oldHostname.domain...
    It seem's that chgiphost.sh script doesn't change em-console configuration.
    Any ideas?
    regards
    Harald.

    Solution:
    I secured Enterprise Mangager (HTTPS, emctl secure...).
    First, I must unsecure EM-Console, run "chgiphost.sh -mid" and then re-secure EM-Console.
    Look at: Metalink - Note 280034.1 How to Secure and Unsecure the AS Control 10g Console
    regards
    Harald.

  • Will vmware horizon work after change domain name and ip adress and vcenter ?

    Hi
    i have a question
    i have to migrate all of my vmware horizon but for example my domain name is now a.com but i have to migare it to new domain b.comit means my domain name and ip adress will be change also connectios server ip adress vcenter ip adress  now i want to know if my domain name and ip adress change and also all of my vm and vcenter and ... change  will vmware horizon work after these changes ?
    best regards
    Babak

    Horizon View is depended on AD and this task is not trivial.
    What needs to be done depends on your setup and configuration and you will need assist from VMware Support and you should first replicate the setup in a test-environment.
    // Linjo

  • Cannot start after change sata mode

    Hi
    I have a probook 4510s i try to install win Xp instead of opensuse. Before  installing  XP, i change a SATA mode from AHCI to IDE. XP was installed ok but when i try to switch back from IDE to AHCI, my laptoop freeze and got black screen. Now when i start a laptop, nothing happens only a HDD led indicator blink. Can enybody help me?? thanks
    Sorry for bad english

    Hi:
    You have to install the SATA ACHI drivers for the notebook which is why that happened. Switch it back to IDE mode for now and then follow the procedures below to get it to work in ACHI mode:
    Download and install the chipset driver first:
    http://h20000.www2.hp.com/bizsupport/TechSupport/S​oftwareDescription.jsp?lang=en&cc=us&prodTypeId=32​...
    Download the Matrix Storage Manager:
    http://h20000.www2.hp.com/bizsupport/TechSupport/S​oftwareDescription.jsp?lang=en&cc=us&prodTypeId=32​...
    I could only find two of the files the manual said to copy to a flash drive.  So, you can download this utility from Intel which will automatically create a floppy disk with the required files and follow the instructions on Page 12-19 of the below link:
    http://downloadcenter.intel.com/Detail_Desc.aspx?a​gr=Y&ProdId=2800&DwnldID=18860&lang=eng
    Read this manual and follow the procedures on pages 12 - 19
    http://bizsupport2.austin.hp.com/bc/docs/support/S​upportManual/c01600726/c01600726.pdf
    After you do this you should be able to change your BIOS setting back to ACHI.
    Paul

  • Concurrent Managers won't start after changing Apps password

    11.5.10.2 E-Business suite on Windows Server 2003 SP2
    Concurrent Managers were working fine after install.
    I have changed the Apps password using FNDCPASS and have run AutoConfig successfully on both the database and applications tiers.
    Copncurrent Managers won't start. ICM starts but not the others.
    I tried setting the profile GSM Enabled to No but to no avail.
    Any help greatly appreciated.
    Thanks,
    Bartoosh

    hi
    may be you can try this,this might be not the same case as yours ,but it worked for me,so may be you can give a try.
    Concurrent manger-standard manager inactive

Maybe you are looking for