Establish a wireless network between Photosmart C4385 and a Mac

I have a Photosmart C4385 All-in-One that I'm trying to use wirelessly. I have a MacBook Pro running OS X 10.7.2. I have a ubee wireless router.
I keep finding information saying that I need to run the "wireless network setup wizard" but I can't find it. I tried to use the different diagnostic utilites that HP suggested but they were only for PC, but the printer came with a Mac that I bought a couple of years ago. I have a new computer now and I'm just trying to get it setup to print wirelessly.

Hello,
Thanks for the post. On this one, I would recommend the following steps pasted in the links below. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02911238&cc=us&dlc=en&lang=en&lc=en&product=365...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Similar Messages

Help! Making a Wireless Network between a PC and Mac and more.

I am trying to make a network between my powerbook and my fiance's pc, so we can share printers. I have an Airport Express and I bought her a Netgear Wireless PCI card. The PCI card is installed and has located the Aiport network. How do I get it to see the printer attached? Is Bonjour necessary? I'm downloading it via the Mac and then transferring the file by Zip because for some reason it wasn't downloading properly on the PC.
Also of note, we use dial-up to connect to the net so this network is again just to share the printers we have, and maybe files.
Printer sharing: I have my HP deskjet connected via a 4-port hub to my Airport. My computer recognizes the HP but when I connected the Lexmark 2250 it couldn't see it at all. Why is that? What can I do to fix it? I have the latest Lexmark Drivers.
How do I get my Mac to see the PC for file transferring, etc? I've been searching through apple's site for information and nothing is really helping me. I am gonna explode.
Any help would be greatly appreciated.
Thank you in advance.
Seth

Ok I got the PC to see my HP 940c wirelessly using Bonjour. However, I still can't get the Lexmark 2250 to show up on either the mac or pc wirelessly when connected to the hub? Is using a 4-port hub connected to the Airport express just not going to cut it for making a multiple printer hub?
I'd really like to do this plus make an network between the two computers.

Unable to set up wireless network between macbook pro and Pixma MX860 printer/scanner

I am about ready to throw everything out the window. I have followed the advice given in an archived discussion on this forum, but I always get hung up just a few steps from the end when I don't get the window I'm supposed to get.
Supposedly, I'm to link the computer and printer initially with the USB cable, configure it, and then it's supposed to work WITHOUT the USB cable.
I've configured the printer in my MacBook Pro, but I'm supposed to "highlight the access point" (presumably my router) in the IJ printer window, and it isn't there.
I've tried running a LAN cable from my printer to my router. That doesn't work, either.
I'm running Snow Leopard (still a bit afraid of Lion).

I'm not familiar with your printer but from what you have said, can I ask the following questions:
Have you actually been able to print using a cable from from Mac Book Pro to your printer, or is this a new setup?
From my own experience with routers/computers/printers you normally have to pair the router to your printer/computer if connecting wirelessly, this involves pressing one or more buttons on the back of the router, then type in the very long security (WEP) keys printed on the bottom of the router.
Apologies if you're not presented with the same problems as I did, but at least it's a start!
Pairing of laptop computers and printers using wifi using the router is sometimes overlooked - look for the WEP keys/access codes and buttons on the back or underside of the router, write down the numbers and letters, and check out whether any buttons on the router need to be pressed!!!

Establish Wireless network between Cisco857W and Linksys AP

Hi
I would like to know if it is possible to establish a wireless network between Cisco 857W and others AP vendors.
The goal is to extend the Wireless network provided by the Cisco 857W to others vendors APs.
Thanks in advance for your cooperation,
MP

Hello,
Thanks for the post. On this one, I would recommend the following steps pasted in the links below. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02911238&cc=us&dlc=en&lang=en&lc=en&product=365...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

How do i set a peer to peer network between my iMac and windows machines?

I want to set up a peer to peer network between my iMac and Windows based computers in my house. I also want it to a wireless set up. Mostly being done to share videos, pictures, and music. Any insight would be appreciated.

I'm trying to connect my MacBook Pro to Wifi using internet sharing
Why?
Just connect the MacBook to the same internet as your iMac.
MacBook > Wi-Fi router > Internet.
You are connected to the internet with your iMac.
iMac > Wi-Fi router > Internet
Why do you want to go MacBook (via Wi-Fi) > iMac > Wi-Fi router > Internet?

Problem connecting MBP to established Linksys wireless network

just got MBP 2.16 (my first mac!). Having trouble connecting to my established linksys wireless network. I have the BEFW11S4 (V.2) etherfast wireless access point + cable router with 4 port switch. Currently have 128 encryption enabled. The linksys router is broadcasting its ID (I can see "linksys" on my mac) but it seems to not accept the password. I tried entering the 26 WEP key, the passphrase, the WEP key in quotes, the WEP after a $ sign... all to no avail. please APPLE community, help out a mac noobie before i have to turn back to Bill Gates....
Dell Dimension 8200, MBP 2.16 Mac OS X (10.4.6) 2 GB SDRAM

To find the IP address or the status, go to system Preferences then network. It will show you the status of any internet connections. You should see one for Airport, it will either show a green light and say 'Airport is connected to the internet' (or something like that) or a red light and say 'Airport is is active but not connected' (something like that). If you double click on Airport or click 'Configure' you will see tabs, click on TCP/IP and it will show all of your details including your IP address.
As for the other, it always refers to wireless networks as 'Airport' and that response is the standard response from a Mac.
the password should be typed in the hex section, not sure about the $ sign. I've never had to do that before. But if you can't connect even with no encription then I would think it is another problem. I would turn off the encription until you can at least get connected and then you can worry about the security afterwards.

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

You need to turn on Printer Sharing on both the PC and OS X. I can't help you on Vista but in OS X it's System Preferences - Sharing - check the Printer Sharing box.

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro. The TC is almost full. What is the best way/device to increase storage capacity?

I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro. The TC is almost full. What is the best way/device to increase storage capacity?

Replace the Time Capsule with one that has a larger hard drive. Or erase the one you have and start a new set of backups or backup one of the computers to a different backup drive.

How can I extend my wireless network using Airport Express and an Airport Extreme on BT Infinity?

I have BT Infinity and I am using the Time Capsule with Airport Extreme as my router. Working well (even on wireless). I want to extend the wireless network with an Airport Express, but I cannot work out the settings necessary in Airport Utility. I am using Mountain Lion 10.8.2 on a Mac Pro. Please help!

BT,
I've read several of your posts, thanks for taking the time to share your wealth of knowledge.
I'm in a situation similar to the one described by 'scoutusmaximus'. Seeking the flexibility of a standalone router, I finally upgraded my 4-yr old ATT DSL gateway (modem+router) to a Comcast standalone modem + the ASUS RT-AC66U: http://www.asus.com/Networks/Wireless_Routers/RTAC66U/
Typically, I stick with all things Apple but the ASUS router seemed fairly superior to the current-gen base station (on paper, anyway; time will tell when it comes to performance) so, for once, I jumped ship. My plan was to extend the ASUS wired/wireless network using my TimeCapsule and 2 Airport Expresses in bridge mode, however, a google search turned up several unhappy customers that claim those devices don't play well with non-Apple routers, especially when it comes to 'extending' a network.
Questions:
1. Can I successfully extend the wired/wireless network created by the ASUS router using the 3 airport devices listed above w/out negatively impacting performance? I'd rather have 1 wireless network as opposed to creating a new wireless network with the TC and then extending it with the AP Expresses... though I'd consider that option down the line if it came to that.
2. Will the LAN ports on the TimeCapsule remain functional?
Btw, my house is wired so, I can reach all 3 devices via ethernet cable coming off of a central, managed switch. Supposedly, you only lose the LAN ports on the TC if you extend wirelessly.
Any advice would be appreciated.

My apple extreme wireless network is working fine with the macs but ios devices (iPhone & iPad) will not connect. I can see the network though. Everything was working until the ISP went down. Any suggestions?

My apple extreme wireless network is working fine with two Macs but ios devices (iPhone & iPad) will not connect. I can see the network and it's telling me I'm connected but Safari says I'm not connected to the internet. Everything was working until the ISP went down. Any suggestions?

Thank you, I've tried the support tips (resetting the network, checking security settings, etc.) and rebooting the network devices several times to no avail. I've actually been working on this for several days (when I can afford to have the network down).
What I have to determine is what has changed in the setup...from when it WAS working just fine with all devices.

How can i keep the music pushed to all of families devices but the calendar and notes just between my phone and my mac using icloud?

Ok, so my whole family has the same apple ID so that we can all get the same music, and we want to be able to use icloud so that when one person buys a song it will push to all of our devices. But the problem is when I want my calendar on my mac to also be pushed to my phone it pushes to all of my familys devices. How can i keep the music pushed to everyones but the calendar and notes just between my phone and my mac using icloud?

Oops my bad...I see that during my troubleshooting I inadvertently left Ringtones unchecked in iTunes.

I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

Hi guillermospain,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
OS X Mountain Lion: Set up a printer
http://support.apple.com/kb/PH11145
OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/PH11143
Cheers,
- Judy

Does anyone know of a simple to do list app that syncs between an iPhone and a Mac?

Does anyone know of a simple to do list app that syncs between an iPhone and a Mac?

Not sure exactly what you are going for...
You're aware you need to use iTunes to sync apps between your iPhone and Mac unless you are running V10.7.2 and have iCloud setup.
BTW... apps that are optimized for an iPhone will not run on the Mac OS X and vice versai, two different operating systems.
It really helps to tell us which Mac OS X you have installed when you post for help. Thanks!

Establish a wireless network between Photosmart C4385 and a Mac

Similar Messages

Maybe you are looking for