Establish link B/W the table EKES  and VBUP

Hi all,
Please Let me know how can we related the table EKES(field EBTYP) and VBUP(Field COSTA) tables...?

Hi
EKES have the delivery Number VBELN
Pass this field to VBUK-VBELN (header Table)
and VBTYP = J and take that VBELN
and pass to VBUP (item table)
or JOIN VBUK and VBUP with VBELN field  (with that of EKES-VBELN)
and take the necessary fields from VBUP
Reward points for useful Answers
Regards
Anji

Similar Messages

  • What is the link between the tables DRAW and MARA

    Hi,
    Can you tell What is the link field between the tables DRAW and MARA
    Nagesh

    Hi,
    There is no direct relationship. But you can find the materials attached as object liink to the document in table DRAD.
    Hope it helps,
    Rajat

  • What are the tables PHO and LOC of OIM Schema?

    Hi,
    In the schema documentation of OIM tables you have the following description for the tables PHO and LOC:
    LOC - Holds information about locations
    PHO - Holds all communication addresses for this contact -- e.g., contact telephone numbers,fax numbers, e-mail, etc.
    When those have have some records? I haven't seen yet any form ou function where I can put some information like that.
    I don't have any problem with them and it is just for curiosity. As I understand the OIM User Model, I thought those tables were part of OIM User Model, where:
    Organization (field ACT_Key of USR table)
    Location (I guess table LOC but it is always empty in my env). There is a field USR_LOCATION but it is not shown by default.
    User Group (all groups a user is member are in the USG table)
    User Defined Fields (all fields start with USR_UDF of USR table)
    Manager (USR_MANAGER that is alwasys empty and USR_MANAGER_KEY that has the Key of User's Manager)
    Organization (ACT_KEY of USR table)
    Contact Information (I guess it is the table PHO)
    Thanks,
    Renato.

    They probably serve no purpose anymore but might have been used at some point during the life cycle of the product.
    -Kevin

  • My brother and I phone number is link together on the same iTunes and Icloud therefore I am getting all his text messages on my phone, how do I stop this? He does not even have an Iphone anymore.

    My brother and I phone number is link together on the same iTunes and Icloud therefore I am getting all his text messages on my phone, how do I stop this? He does not even have an Iphone anymore.

    Try going to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".   If that doesn't work, you'll have to tap the ID, sign out, then sign back in with a different Apple ID for iMessage.

  • Query to find out the table name and column name..

    Hi Experts,
    I have an Oracle DB in which has more than 50 tables and 100,000 records. I want to get the record which contains *"ITxtVarValue references a non existing text"* the text.
    Is there any query there to find out the table name and column name of this particular record where it reside?
    Please help. Any help will be rewarded.
    Thanks,
    G

    Using this forum's search function, I found a thread that should give you an idea: How to find out a tablename
    C.

  • I want to know the table name and field name of this description

    i want to know the table name and field names of this description
    supplieriddomain

    Hi SV,
    Try this:
    1) Go to SE15 (Repository info system)
    2) Expand ABAP Dictionary
    3) Expand Fields
    4) Click on Table Fields
    5) Enter the field name you want to search in field name or use wild cards with keywords in short decription field (like supplier ) and Execute.
    OR
    If it's a screen field, do a F1 on the field and click on Technical information on the help window popped up from Menu..this will tell you the field name along with structure or table name.
    Hope this helps you.
    Regards,
    Vivek

  • I want to know the table name and field names of this descriptions

    i want to know the table name and field names of this descriptions
    FPAApprover.UniqueName,FPAApprover.PasswordAdapter

    Hi Ramana,
    Go to the system table DD03T , use the table contents..
    In the field ' DDTEXT ' , give your keywords...
    for ex : say Unique name... as  UniqueName* in field DDTEXT
    Execute.. u will find the entries....
    May be ur problem will be solved...
    Thank u...
    Reward if useful and close the thread..
    Rajiv

  • What are the tables rfpdo and rfpdo1?

    what are the tables rfpdo and rfpdo1?
    wht are these fields?
    rfpdo-allgstid
    rfpdo1-allgfael

    Look at <a href="http://help.sap.com/saphelp_46c/helpdata/en/40/5f3275e24bd111950d0060b03c6b76/frameset.htm">Data Collection Programs for FI-GL, FI-LC, CO-OM and CO-PA</a>
    <i>Data Collection Programs for FI-GL, FI-LC, CO-OM and CO-PA
    Description
    1. Data retrieval from the FI general ledger With the report RFBILA00, data from the balance sheet and the P+L statement can be transferred to SAP-EIS. Detailed information on this is stored with the corresponding parameter of the report RFBILA00 (RFPDO-BILA_EIS).
    2. The interface to FI-LC has been revised and the sender structure enhanced. AS sender field names were changed, it is necessary to adapt transfer rules created in release 2.2. Detailed information on this interface is contained in the online help for transfer program RGCEISS1.
    3. CO-PA data can be transferred into SAP-EIS using a basic report. More information on this can be found in the Implementation Guide of SAP-EIS.
    4. Data from CO-OM can be transferred to SAP-EIS using Report Writer reports. Since reports must fulfill certain conditions for the data transfer, standard reports in the report group '1EI' are delivered for CO-CCA. From the same group, you can define reports which transfer data from CO-OPA to SAP-EIS. You will find more information on this in the implementation guide.</i>
    Regards

  • I need know how operate the tables RSBKDTP and RSBKDTPH

    hi, i need know how operate the tables RSBKDTP and RSBKDTPH. i need kwon things like:
    - the diference between this tables
    - How operate the table RSBKDTPH and RSBKDTP ? What type the DTP's are inserted in this tables? How often are inserted DTP's in this tables?.
    Thanks in advanced

    The basic difference is
    RSBKDTP  - retrieves based on Object version (DTP  and OBJVERS are keyfields)
    RSBKDTPH - retrieves based on Time stamp (DTP  and timestamp are keyfields)
    according to your requirement you can consider the tables for statical reports on DTPs

  • Problem linking A/R invoice table INV1 and Credit memo table RIN1

    Hi Experts,
    I have developed a sales report by picking data from the A/R invoice table INV1, BP partner table OCRD and Charts of accounts table OACT and the report is working fine. The only problem is I am having a challenge linking the above tables with the A/R Credit memo table RIN1. I want the linkage that is in case an A/R invoice is cancelled by raising an A/R credit memo, the same is not reflected on the sales report, kindly help.
    Patrick

    Hi Gordon,
    Sorry, I did both the report and relationships in crystal but if I do a query in a view it is something like
    SELECT     dbo.OACT.AcctCode, dbo.OACT.AcctName, dbo.INV1.ItemCode, dbo.INV1.Dscription, OCRD_1.CardCode, OCRD_1.CardName
    FROM         dbo.OCRD CROSS JOIN
                          dbo.OACT INNER JOIN
                          dbo.INV1 ON dbo.OACT.AcctCode = dbo.INV1.AcctCode INNER JOIN
                          dbo.OCRD AS OCRD_1 ON dbo.INV1.BaseCard = OCRD_1.CardCode
    the problem is incorporating the credit memo table coz if i include it I end up with wrong figures, hope this will help you guide.
    Patrick

  • Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

    Good day to all of you!
    I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
    In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
    I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
    MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
    1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
    2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
    PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
    All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
    Any help, pls?
    Good day and thank you!

    Hi Alex,
    In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
    http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
    and
    Just read the OSS note mentioned earlier.
    Symptom
    You want to integrate customer-specific fields in material master maintenance.
    Other terms
    SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001 
    Solution
    To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
          1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as  the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
          2. Enhancing online maintenance in customized material master maintenance:
          Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
          In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
          If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F): 
          Application examples for standard field selection:
          The field is mandatory and is to be flagged with a "?".
          The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
          The following data is required for each field:
                a) Field name        (T130F-FNAME)
                b) Field selection group (T130F-FGRUP)
                Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
                You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
                Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
                c) Maintenance status (T130F-PSTAT)
                List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
                d) Reference        (T130F-KZREF)
                This indicator must be set if the field from the reference material should be proposed during creation with reference.
    Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
    You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
    In addition, you must not add new standard fields to table T130F.
          3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
          Add the fields to central field table T130F (see above).
          Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
          Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
          For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
          If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
          Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
          As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
                a) Add the customer-specific fields to include CI_MMH1.
                The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
                Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in  table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
                b) Activate include CI_MMH1.
                c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
                d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
    Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
    In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
    Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
    If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
    If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
    To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
    check this link. It may helps you to solve your issue.
    Thanks
    Sravan

  • How to identify the row in the table ? and pass it ?

    I have a report region
    report is based on query "SELECT * FROM EMP".
    The output shows 14 row from emp table..
    Ename     Job Sal     Comm
    ALLEN      SALESMAN      1600      300
    WARD      SALESMAN 1250      500
    MARTIN      SALESMAN      1250      1400
    KING      PRESIDENT      5000      
    TURNER      SALESMAN 1500      0
    now what i want is when i click on a row , say King row ,
    i want a popup box with " KING      PRESIDENT      5000      "
    i want all the column to be passed as parameter based on the row i click.
    how can we do that ?

    Sure - You need to also select the empno in your report. In the report attributes, you click on the empno field, and you can make it a report link. You would basically create a 2nd page which will be your pop-up, and create an item called P2_EMPNO (assuming your 2nd page is page 2).
    Then on your pop-up page, you can use that empno to fetch the other fields. Either by using an automated-row fetch, or other means.
    If you want a quick tutorial on making pop-ups, check here. Any questions, post back.
    http://www.oracle.com/technology/products/database/application_express/howtos/how_to_create_custom_popups.html

  • Can't see Manage Link to work with tables views and links

    I have an Azure account linked to Office365, and a Pay as you go subscription;  and have been working with SQL for a few months without any problem.    I wanted to move one of my databases to my own Azure account (not tied to our O365)
    so I get a free trial, and then converted that to paid with my credit card.   I had someone help me move the database, but now when I look at it in the new account there is no "Manage" link at the bottom to open and see the tables, fields,
    views, etc.     I don't understand why that isn't there.  I can copy, delete, all sorts of things.   But I can't "manage".    any ideas would be greatly appreciated.

    I checked with a college and he pointed me to another post on the same topic:
    Clicking the ‘Manage’ button in Azure Management portal launches the SQL Azure Management (SilverLight) Portal in a new tab in the browser. At this time, we do not plan to support this SilverLight-based SQL Azure Management Portal with V12 databases and
    servers.
    We are working hard on an HTML-based T-SQL editor experience that will deeply integrate with the preview Azure Management Portal. Until then, we encourage customers to use Visual Studio Community 2013 which is a full-featured free version of Visual Studio
    2013 to connect to Azure SQL databases for tasks such as running T-SQL, designing schema and for offline and online database development.
    You can click the the ‘Open in Visual Studio’ in the database page in the Azure Management portal to launch VS2013 on your computer and easily connect to your SQL Database.
    In addition, you can also use SQL Server Management Studio 2014 with CU6 to connect to Azure SQL Database. More details are on this blog post.
    This posting is provided "AS IS" with no warranties, and confers no rights
    I hope that helps,
    Jan

  • How to get the table name and bind columns names in an INSERT statement ?

    I have an INSERT statement with input parameters (for example
    INSERT INTO my_table VALUES (:a, :a, :a)) and I want to know
    without parsing the statement which is the name of table to
    insert to and the corresponding columns.
    This is needed to generate the SELECT FOR UPDATE statement to
    refetch a BLOB before actually writing to it. The code does not
    know in advance the schema (generic code).
    Thanks in advance,
    Joseph Canedo

    Once you have prepared your statement, you can execute the
    statement with the OCI_DESCRIBE_ONLY mode before binding any
    columns. Then you can use OCIParamGet to find out about each
    column (column index is 1-based). You should get OCI_NO_DATA or
    ORA-24334 if there are no more columns in the statement. Note
    that the parameter descriptor from OCIParamGet is
    allocated/freed internally by OCI; you do not need to manage it
    explicitly. The parameter descriptor is passed to OCIAttrGet in
    order to obtain for instance the maximum size of data in the
    column OCI_ATTR_DATA_SIZE. You can also get the column name in
    this way, although I do not remember the #define off the top of
    my head. Getting the table name appears to be much more
    difficult; I have never had to do that yet. Good luck. -Ralph

  • What is the table name and field name for Street 2, street3 in Vendor mast.

    Hi,
    I have a BDC code for Vendor master. I just need to insert the fields street 2, street3, stree4 and street5 in the code. Can I insert it in the code directly without re-recording? If yes then what would be the table and field names for the fields mentioned above.
    Thanks & Regards,
    Sriram

    Hi Sriram,
       Its a Configuration Setting to bring the Check box ask your SD consultant, else directly insert this try, change your internal table filed here,
      PERFORM bdc_dynpro USING 'SAPMF02K'    '0100'.
      PERFORM: bdc_field USING 'RF02K-BUKRS' indata-bukrs,
               bdc_field USING 'RF02K-EKORG' indata-ekorg,
               bdc_field USING 'RF02K-KTOKK' indata-ktokk,
               bdc_field USING 'USE_ZAV'     'X',------------------------>this part is check box
               bdc_field USING 'BDC_OKCODE'  '/00'.
    for street just try this without re-recording,
    PERFORM bdc_field  USING 'ADDR1_DATA-NAME1'       indata-name1.
      PERFORM bdc_field  USING 'ADDR1_DATA-NAME2'       indata-name2.
      PERFORM bdc_field  USING 'ADDR1_DATA-SORT1'       indata-sortl.
      PERFORM bdc_field  USING 'ADDR1_DATA-STREET'      indata-stras.
      PERFORM bdc_field  USING 'ADDR1_DATA-POST_CODE1'  indata-pstlz.
      PERFORM bdc_field  USING 'ADDR1_DATA-CITY1'       indata-ort01.
      PERFORM bdc_field  USING 'ADDR1_DATA-COUNTRY'     indata-land1.
      PERFORM bdc_field  USING 'ADDR1_DATA-REGION'      V_regio.
      PERFORM bdc_field  USING 'ADDR1_DATA-PO_BOX'      indata-pfach.
      PERFORM bdc_field  USING 'ADDR1_DATA-STR_SUPPL2'  indata-suppl2.
      PERFORM bdc_field  USING 'ADDR1_DATA-TAXJURCODE'  indata-txjcd.

Maybe you are looking for