Establish mail flow from Exchange 2007 to Exchange 2013

I am currently using Exchange 2007 into three sites in three cities and two of the sites are connected to Internet sending and receiving emails via Edge transport servers.
Now I am planning to upgrade to exchange 2013 CU1. I don't find any documentation on how to establish mail flow between Exchange 2007 and Exchange 2013. Will it be automatic or do i need to create specific connectors between them?

Was this question answered.  We're in the same situation now as we're upgrading to Exchange 2013 from 2007. The latest CU certainly helped.   Initially the test mailboxes on Exchange 2013 couldn't email each other - This was resolved with CU7 and
using "Custom Settings" - manually entered IPs for DNS in the Exchange  Admin Center "DNS Lookups".
Issue at the moment Test mailboxes on Exchange 2013 cannot email mailboxes on 2007 or visa-versa and mail from external sources queues on the 2007 box.  
Any assistance will be greatly appreciated.  

Similar Messages

  • Mail flow in exchange 2013 and lotus domino coexistence

    scenario: Exchange 2013 CU3 running Windows 2012. coexsisting with lotus domino 8.5.1
    there two cas server and two mailbox server. users migrated using quest tool. distribution groups are still lotus notes.
    in one of distrbution group which containing around 5 users, 4 users are migrated to exchange 2013 cu3 one user still in lotus notes. the above mentioned distribution group members complaining they are not reciving mail which address to distribution group.
    I used exchange shell for message tracking and I found below entries.
    in source field the entry is mailboxrule i have verified there is no mail box rule in the user front
    in eventid field the entry is receive
    in the sourcehostname its show exchange 2013 server.
    recipientstatus {unknown}
    Since the distribution group is in lotus notes I want find event which sates that the message or exchange 2013 forwarding or checking the members of DL .
    which field will give the required details currently i am finding anything.
    please suggest

    Thanks.
    In current scenario we cant create any dl in the exchange 2013 front. I want to know what this mean
    recipientstatus {unknown}.
    secondly I have followed the link below
    http://social.technet.microsoft.com/Forums/exchange/en-US/194c0bd8-9c77-4750-9f47-944451f2dd40/message-tracking-in-large-distribution-list-challenges-please-help?forum=exchangesvrgenerallegacy
    I ran the below command:
    Get-MessageTrackingLog -MessageSubject
    "messageTrack" |select eventId, sender,@{l="recipeints";e={[string]($_.recipients)}}|ft
    -Aut
    oSize -Wrap
    I am getting enventid, sender field details but recipeints field is empty.
    Please suggest.

  • Cannot send mail from Exchange 2013 to Exchange 2007

    I have an
    Exchange 2007server with all roles in the same server (Version:
    08.03.0327.001 ) on a Windows 2008 R2 server. I have now installed two Exchange 2013 servers both with CAS and MBX roles on Windows 2012 servers
    (full patched). There is also a DAG between the new servers. All mail goes through a BorderWare besides the internal mail.
    I can send mail from both environments to the Internet. I can also send internal mail from Exchange 2007 to Exchange 2013.But the problem is that I am unable to send from Exchange 2013 to Exchange 2007. I've debugged, but not solved the problem and there are
    few articles on the Internet.
    Any suggestions?

    These two sentences are in conflict : "I can also send
    internal mail
    from Exchange
    2007 to
    Exchange 2013. But
    the problem is
    that I am unable
    to send from Exchange
    2007 to
    Exchange 2013. "
    Can you describe what is your real problem? Flow from E2007->E2013? Or vice versa?
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

  • Moving mailbox from exchange 2013 back to exchange 2007 ..

    Hi Guys,
    I recently configured configured co-existence between exchange 2007 and exchange 2013. I moved a pilot user from exchange 2007 to exchange 2013 and now the user has issues receiving mails.
    I am trying to move the user back to 2007 pending the resolution of the issue. The move status says completed but the mailbox remains in the exchange 2013 environment.
    I need to return the user to an exchange 2007 mailbox database ..any ideas on what I am missing.
     Thanx guys ..
    ~Richard
    ..forever is just a minute away*

    Hi Richard,
    Please move your mailbox from Exchange 2013 to 2007 from the Exchange 2013 admin center (EAC) and the Exchange Management Shell instead of EMC in Exchange 2007.
    Then check whether the issue persists. If possible, please provide more error logs for further analysis.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Force downloading mysite HD photos from Exchange 2013

    Hi Sharepoint Admins,
    I want to force download all HD photos from Exchange 2013 into users mysite profiles. I already provisioned all user mysites by powershell. HD photos are also available, but every user has to open his own mysite by himself to trigger the picture download.
    The goal is to download photos without having every user to logon on their site.
    Is there any way to force this?
    "SharePoint Server 2013 requests photos from Exchange 2013 automatically when a user performs an operation that causes a request for their own photo (for example, browsing to their own user profile page). That means that the user needs to have requested
    his/her own photo, before other users will be able to see it."
    Best Regards
    Markus Kühn

    Hi Markus,
    I understand you would like to manually sync HD photo from Exchange 2013 to SharePoint 2013 mysite.
    Since "SharePoint Server 2013 requests photos from Exchange 2013 automatically when a user performs an operation that causes a request for their own photo (for example, browsing to their own user profile page)", you need to browse all
    sites in Mysite web application.
    To do this, you may refer SharePoint warmup script and make the script to work for you MySite web application. Just run the warmup script, all mysites can be browsed once.
    https://gallery.technet.microsoft.com/office/SharePoint-2007-2010-or-d1884b4b
    https://spbestwarmup.codeplex.com/
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Migrating a mailbox cross forest from exchange 2013 Sp1 to exchange 2010 SP2 Update rollup 8

    I can migrate a mailbox fine from exchange 2010 sp2 update rollup 8 to exchange 2013 sp1 or Cu2.
    I was testing today migrating cross forest from 2010 sp2 udpate rollup 8 back to exchange 2010 sp2 but I get the below error.  Is this even possible?  I cannot find any documentation on this scenario yet.
    VERBOSE: [21:52:47.622 GMT] New-MoveRequest : The remote server doesn't support client 'casservername.domain.com'
    version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
    VERBOSE: [21:52:47.637 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
    The remote server doesn't support client 'casservername.domain.com' version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
        + CategoryInfo          : NotSpecified: (0:Int32) [New-MoveRequest], RemotePermanentException
        + FullyQualifiedErrorId : 782D22F0,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest

    Hi Steve,
    I'm a little confused what you are saying. Here is my understanding:
    When you migrate mailboxes from Exchange 2013 back to Exchange 2007, the above error occurs.
    If I have misunderstood your concern, please let me know.
    For migrating mailboxes back to Exchange 2007, there is a simple and straightforward method. Please use the New-MailboxExportRequest cmdlet to convert all mailboxes into pst files. And then use the Import-Mailbox cmdlet to import all pst files into Exchange
    2007.
    Hope it helps.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server

    Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server. The command works if you issue directly from the server exchange shell.
    I open the remote power shell to the exchange server 2013.
    Issue the following commands and getting the following error.
    $mailbox = Get-Mailbox -Identity testuser$mailbox.EmailAddresses -= "eum:50004;phone-context=telExt5digits.lync5.com"Then getting the following error:Method invocation failed because [System.Collections.ArrayList] doesn't contain a method named 'op_Subtraction'.
    At line:1 char:27
    + $mailbox.EmailAddresses -= <<<<  "eum:50004;phone-context=telExt5digits.lync5.com"
        + CategoryInfo          : InvalidOperation: (op_Subtraction:String) [], RuntimeException
        + FullyQualifiedErrorId : MethodNotFoundHelp!

    Now for an answer - your remote session doesn't have the same object you have on the server itself.  Notice it says this is an array list, not a ProxyAddressCollection.  If you need to work around this, you'll need to massage the addresses another
    way that the system will accept.  I'd try the following:
    $NewAddresses = $mailboxEmailAddresses | ? { $_ -notlike "eum:50004;phone-context=telExt5digits.lync5.com" }
    See what you get in the $NewAddresses variable when you do this.

  • Upgrading from Exchange 2013 CU1 to CU2

    1 : Upgrading from Exchange 2013 CU1 to CU2
    ================================================================
    "Unable to remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1.
    Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Service 'Tracing Service for Search in Exchange ' (SearchExchangeTracing) could not be stopped. 
    Verify that you have the correct permissions to stop system services.'."
    ================================================================

    Hi,
    According to the error message, it is highly likely caused by insufficient permission.
    Please verify that your user account is member of Exchange administrators group and not limit by RBAC, than try again to see if this works.
    If the issue continues, run the command below to uninstall the product:
    msiexec.exe /X {code 4934d1ea-be46-48b1-8847-f1af20e892c1}
    Msiexec (command-line options):
    http://technet.microsoft.com/en-us/library/cc759262(v=ws.10).aspx
    If you have any question, please feel free to let me know.
    Thanks,
    Angela
    Angela Shi
    TechNet Community Support

  • Loading MySites profile photos from Exchange 2013 to Sharepoint 2013

    Hi
    I've configured SharePoint 2013 to get it's profile photos from Exchange 2013 using the method in the link below BUT Is there way to force the initial sync other than requiring the user to load their profile in a browser? 
    http://blogs.technet.com/b/jenstr/archive/2012/08/17/using-exchange-2013-preview-high-resolution-photos-from-sharepoint-server-2013-preview.aspx
    Thanks

    As a workaround I have applied a client-side powershell load of the SharePoint thumbnail image.  This triggers the sync just like loading in a browser does. I run it hidden on the user PC.  I run it once a day for a while as for some reason
    a load of the profile does not always trigger the sync and if it does not subsequent immediate sync's don't help - presumably due to the UserPhotoExpiration or
    UserPhotoErrorExpiration settings.
    Here's the code - enjoy....
    # script to trigger Sharepoint to download the high res photo from Exchange
    # sadly this must be done client side.
    # have PC management software copy the files to the local PC then run......
    # powershell.exe -ExecutionPolicy Unrestricted -noninteractive -File "%temp%\PhotoSync.ps1" >>"PhotoSync.log" 2>&1
    # All output will end up in the log file
    # the following syntax triggers the download (just find yours from your Sharepoint User profile photos)
    #https://people.myco.com/User%20Photos/Profile%20Pictures/USERNAME_LThumb.jpg
    $username = [Environment]::UserName
    $userphoto = "https://people.myco.com/User%20Photos/Profile%20Pictures/" + $username + "_LThumb.jpg"
    write-host "$username : $userphoto"
    $web = New-Object system.Net.WebClient
    $web.UseDefaultCredentials=$true
    Try{
    $result = $web.Downloadstring($userphoto)
    Catch {
    Write-Warning "$($error[0])"

  • Migrate mailboxes from Exchange 2013 to Exchange 2010

    Hello,
    We have a merger and would like to know if it is possible to migrate mailboxes from Exchange 2013 to Exchange 2010 in a cross-forest scenario.
    Or should we first upgrade destination Exchange 2010 to 2013?
    Peteris

    Hi Peteris,
    Based on my tests, we can move mailboxes from Exchange Server 2013 to Exchange server 2010. You can use the Prepare-MoveRequest.ps1 script in the EMS to prepare mailboxes for cross forest moves.
    For more information about it, here is a helpful article for your reference.
    Prepare mailboxes for cross-forest moves using the Prepare-MoveRequest.ps1 script in the Shell
    http://technet.microsoft.com/en-us/library/ee861103(v=exchg.150).aspx
    Hope my clarification can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • Exchange 2013 SMTP Mail Flow from external domains

    I have query related to mail flow for incoming mails from external domains from Internet facing site. There are two sites - Site A & Site B. Both have Exchange 2013 CAS servers in NLB and Exchange 2013 Mailbox in individual DAG - say DAG1 in Site
    A and DAG2 in Site B. Site A is Internet facing site and site B is not Internet facing.
    An incoming Internet mail meant for recipient in Site B will land in Exchange 2013 CAS server in Site A. This CAS Server in Site A will look for the recipient in local Domain Controller and get to know the mailbox database of this recipient is in DAG2 (
    in site B ) Will the FET service in EX2013 CAS in Site A make a SMTP connection with FET service of EX2013 CAS in site B which will then make SMTP connection to EX2013 Mailbox server in Site B which is holding the recipient mailbox Active copy for delivery.
    OR
    EX2013 CAS will send this mail to Ex2013 Mailbox server in site A and the Hub Transport service running in in site A will then make SMTP connection with EX2013 Mailbox server in Site B which is holding the recipient mailbox Active copy
    Need clarification on above
    Thanks
    Parveen

    Hello,
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Cara Chen
    TechNet Community Support

  • Mail Delay from Exchange to Smart Host

    I have this POC setup.  I have 2 smart host appliances sending and receiving.  Exchange 2010 sp3.
    Mail flow in/out working fine.  I have one send connector with both the hosts in it with IPs.
    I notice when ever I send an email from Outlook it take about 15-40 seconds of delay between exchange and Hosts.  The delay seems to be on exchange side sending to the host.
    Any thoughts?  I will do some more tests ...
    Tnx

    If I put one host in the connector then there is NO delay at all. 
    It appears that when there are 2 hosts in the One connector exchange takes its time to figure out that to which host should it send hence causung they delay ranging from 20 to 45 secs.
    !deaz?

  • Mails From Exchange 2013 are received as SPAM

    Hello,
    We have Exchange 2013 configured to send and receive mails internally and externally. Everything is going great except the fact that the mails sent FROM our Exchange 2013 are received as SPAM. For example, I send an email from exchange to my gmail account
    (generally to any EXTERNAL receipt). I receive the mail in the SPAM folder.
    Any ideas Please !!

    Hi,
    Firstly, I’d like to recommend you find out exactly what the problem is and resolve it before bothering to delisting from the blacklist.
    And based on my knowledge, there are the following reasons:
    1. Exchange Server is pumping out SPAM emails because a mailbox password was compromised:
    Please figure out which mailbox user is the culprit by looking over event viewer logs and change the password. Then clear email queue and see if any new spam emails are generated, if the change of password stops the flow of SPAM email, we can remove the domain
    name from the blacklist.
    2. One of our computers are infected with a mass mailing worm virus:
    We can check our firewall log
    For information about removing from blacklist, you can refer to the following similar thread:
    http://social.technet.microsoft.com/Forums/en-US/b3b818a6-641a-4264-87ca-fa4183ffc50c/how-to-remove-my-ip-address-fro-blacklist?forum=exchangesvrsecuremessaginglegacy
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Outlook 2011 for Mac users must click send/receive to get new mail from exchange 2013 server

    I recently switched our primary CAS servers over from a single exchange 2010 cas/mailbox/hub server to a couple new exchange 2013 CAS/Mailbox servers.  Exchange 2013 has cu3, and is hosted on windows server 2012.  Anyone who has their mailbox hosted
    on one of these exchange 2013 servers has an issue where they must click the send/receive button to get new messages downloaded to their client. This is only the case for outlook 2011 for mac client.  Activesync clients, mac mail, OWA, and Outlook 2010/13
    all behave normally.
    Where can I look or what can I check to troubleshoot this issue?

    Hi,
    Any good news from the Mac Forum?
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Mails from Exchange 2013 to Exchange Online blocked using Blocklist 1

    Hello,
    1 week ago I've implemented a new Exchange 2013 at a company which used SBS 2011 before.
    But now its impossible to send a mail to a recipient on Exchange Online.
    Everytime we get a NDR with the following text:
    Service unavailable; Client host [xx.xx.xxx.xxx] blocked using Blocklist 1; To request removal from this list please forward this
    message to [email protected]
    If I run a SPAM-Blacklist Check on mxtoolbox.com I can see that the IP is on none blacklist.
    How can i determine why this IP is on the Exchange Online Blacklist? I'm sure that no spam was sent over this IP, the new infrastructure is 1 week old...
    Could there be an other reason ?

    Hello,
    According to the NDR information, this issue is caused by FOPE last update. So I recommend you contact FOPE support to delist.
    Please open the link:https://support.live.com/eform.aspx?productKey=mocpexforefront&ct=eformts&scrx=1&brand=mocp&brandtry=1 ,choose
    "Delisting Request" under "What type of problem you have".
    Cara Chen
    TechNet Community Support

Maybe you are looking for