Establish the link between equipment and its standby equipmnent

Dear experts
How to establish the link between equipment and its standby equipmnent in SAP?
For example, I have one pump in a plant and also i have a standby pump installed next to it...now i would like to establish a relation between these two inorder to track them.
I tried linking them as subequipments, but logically that is not sub equipment.
what is the best way to do it?
Regards

Praveen,
Equipment & Standby equipments are  installed on same Function location.
There are below workarounds for solutions.
1. Use Position Number
2. Use A,B,C indicator with Running & Standby status
2. Use link if it is applicable.
3. Use classification system & provide characteristic as Running / Standby
Further u can assign the System condom which is equivalent to equipment running  or stop condition during transactional data creation like order..
If it is running it indicates it is working.
If it is in stop condition then at that time it is in standby mode.
Thanks,
Ramesh

Similar Messages

  • Table Link between Equipment and Sub-equipment

    Hi all
    My requirement is this
    I have one mobile set with a serial number. for that mobile set i have one battery with a serial number, now i want to link both the serial numbers, one as main and another as sub item
    I tried by maintaining the battery serial number as sub-equipment in the main mobile set equipment number master,
    Let me know the table link between equipment and sub-equipment
    I want a report based on the input mobile set equipment number what are all the sub-equipment associated with the main equipment
    Also suggest is there any other approach,
    Regards
    Amuthan M

    Hi
    EQUZ is the table,if u give the sub equipment in equipment field and execute.you can find the main equipment in superior equipment field

  • What is the link between PO and Requisition in database side

    hello friends,
    please can any one tell me that what is the link between PO and Requisition in database side. means after creating the requisition we will go for create the PO based on that requisition.
    want to know that what is the link between both in database side.
    Thanks in advance
    krish.

    Hi,
    The link is at distribution level, between:
    PO_DISTRIBUTIONS_ALL.REQ_DISTRIBUTION_ID
    and
    PO_REQ_DISTRIBUTIONS_ALL.DISTRIBUTION_ID
    Hope it helps.

  • How to establish the connection between crm and r/3

    Hi,
    Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
    Could any one tell me where to find adapters and plugins for this.
    Thanks in advance.
    Ajey

    Hello Ajey,
    in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
    B01: CRM Generation
    C71: CRM Connectivity
    B09: CRM Replication
    from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
    Regards
    Gregor

  • How to break the link between photoshop and lightroom when saving a photo?

    I've had an ongoing issue with saving copies of photos I import from LR to PS and back into LR. Any multiple copies I make get erased when they move back to LR. My solution has been to save a copy in an extra folder apart from Lightroom and import them in later. It's rough, but it works. But now I have a new demon.
    I tweaked a photo in LR, made a copy to keep it safe, then sent the copy over to PH where I did some magic. I Saved As in that special other folder, closed the tab, got the usual box asking if I wanted to save the changes (of course I did), I went back to LR to see both the original and copy changed over to the PS version. I went back to PS, opened the .psd, unclicked the mask, clicked the checkbox, when back to LR and both the original and copy in LR had the mask removed.
    I'm missing something here.
    There m u s t be a way to break the link between PS and LR so that when I save a copy of a photo I made in LR the original and copy remain two separate photos. Does anyone know how?
    Thanks,

    I think I am a little confused. What you are describing seems more like a Project Server "Profile" issue, than a SharePoint to MS Project Sync.
    If my guess is correct, then you just need to set the default profile to be something other than your computer.
    If I am wrong, a screenshot of the error would be really helpful.
    Cheers,
    Prasanna Adavi, Project MVP
    Blog:
      Podcast:
       Twitter:   
    LinkedIn:
      

  • Deactivate the link between qualification and appraisal

    Hi expert,
    i have a question for the qualification(infotype 0024) and appraisal (infotype 0025) in PA here.
    After I maintained qualification for infotype 0024, i found that, when i go into appraisal(0025), the screen automaticlly switched to qualification(0024).
    As i known, i have already done the configurations for the appraisal, but all the appraisal criterira didn't show in info type 0025.
    Anyone knows how to deactivate the link between qualification and appraisal?
    please advice.
    Thanks,
    Liang

    Hi Liang,
    Goto SM31 -> T77S0.
    PLOGI APPRA - make it 0.
    PLOGI QUALI - make it space or 0 A032 Q.
    Try it.
    Regards,
    Dilek

  • How to find the link between strcture and query technical name

    Hi Guru's
    How to find the link between Strcture in the query and query technical name. In other way where used list of the structure  used in queries?
    I know we have table called RSZELTDIR which have the values of strcuture name. from here i do not find any link to query technical name.
    Please can anyone help me?
    Regards,
    Sirisha

    Hi ,
    For structure and query relationship, the structure has to be a reusable structure( a global one). Then you can right click in on the structure name (in BEX query designer) and select the where used list. You will find all the query names where it is being used.
    U can also check out tables RSRREPDIR and RSZCOMPDIR for other query properties.
    Thanks,
    Amit

  • How to customize the link between archivelink and Alfresco

    hi,
    We are using Alfresco as content manager and we want to scan the invoices according to the "Late Storage with Bar Codes in FI" scenario [http://help.sap.com/saphelp_470/helpdata/en/46/c4317ffc4b11d195650000e82deb58/frameset.htm].
    Each scanned invoice will be stored in Alfresco as a pdf file and we want to be able to display it from the sap 'display FI document' transaction (thru 'environment' menu / Additional assignments/object links).
    my question is how to make the bridge between sap archivelink and Alfresco for this display ?
    how to customize link between archivelink and Alfresco ? Is it possible with customizing only or is it necessary to buy third party software ?
    we are working in 4.7.

    Hi,
    Apparently you need an interface between SAP and Alfresco that implements SAP archivelink.
    Once that is in place you can configure a repository in OAC0.
    At the link below you find a link to a PDF
    http://forums.alfresco.com/en/viewtopic.php?f=14&t=13502
    Our company had an own content repository software. It used KGS SAPALINK to make the connection with SAP.
    Furthermore CTAC seems to have done development to connect SAP and Alfresco.
    Currently we are looking for a new repository system as well. A couple of weeks ago management decided that within some departments Alfresco will be the standard DMS. It would be great if we could use it as content server as well.
    Kind Regards
    Edmond

  • Table link between IBASE and its associated products

    Hi,
    If we go to the transaction IB53 and enter an IBase number, all the products asssociated with the IBase will be listed out.
    Similarly, if we have the IBASE number how can we track the associated products via tables.(i.e) the table link between IBIBIBASE and COMM_PRODUCTProduct_id
    Thanks in advance.
    -Aaru

    In two steps..
    1. Convert Product GUID using FM 'GUID_CONVERT'
      CALL FUNCTION 'GUID_CONVERT'
        EXPORTING
          iv_guid_x16 = product_guid
        IMPORTING
          ev_guid_c22 = sysuuid-c22.
    2. Get the IBASE from view v_ibinr where objnr = sysuuid-c22

  • [SOLVED] What's the link between AUR and ABS?

    Hi!
    I'm still a bit new to Arch and recently I added google-talkplugin using AUR (https://aur.archlinux.org/packages/google-talkplugin/).
    But apparently there is a link between AUR and ABS that I don't get already...
    Most of all, will google-talkplugin be updated automatically when I do a "pacman -Syu" or I'll have to check for new version frequently and recompile everything each time?
    I think maybe ABS is the solution to this problem...?
    Thanks!
    Last edited by Creak (2013-10-27 12:56:00)

    Creak wrote:About the AUR helpers, there is quite a long list of search/build helpers.. Is there better ones? I've just seen yaourt in a screenshot once...
    This is highly subjective and depends on what you need and what your current experience level is.  You will often see yaourt discouraged for new users - it just automates too much, so when something goes wrong, users who haven't used less-hand-holding tools have no idea how to proceed.  I use cower, which has a simple command to check which AUR packages you have installed are outdated - but then it is up to you do update them yourself.  I'd suggest something like the latter approach.

  • What is the link between tablesPA_PROJECTS_ALL and PA_PROJECT_ACCUM_ACTUALS

    we hav requirement where we need to join these tables.
    can anybody tell ,What is the link between tables PA_PROJECTS_ALL and PA_PROJECT_ACCUM_ACTUALS

    This looks like an Oracle Financials question.
    I don't think anyone here can answer that.
    You need to look for a Financials or E-business forum.
    Sybrand Bakker
    Senior Oracle DBA

  • What is the link between "sood" and "ebelen" ( in me22n ) ?

    in me22n there is an option to attach doc  ,
    what is the link between the order and the doc  ?
    i done st05 and found "sood" sofd"
    also by answer here fm : SO_USER_READ_API1
    but didnt find the link between the order "eblen" and the attach doc .
    thanks

    y u are finding out link b/w EBLEN and Doc ? these tables are related to SAP office.
    SOOD = SAPoffice: Object definition
    SOFD = SAPoffice: Object Definition
    Regards
    Prabhu

  • Link between equipment and items in stock

    Hi Expert
    I work on maintenance, and I would like to create a link between the equipment and items in stock PDR
    what is possible without going through the nomenclature article
    Thanks

    yahya el hammami,
    Investigate maintenance [Bills of Materials|http://help.sap.com/erp2005_ehp_04/helpdata/EN/c4/e51386a2f211d19dae0000e8323350/frameset.htm] (BOMs)
    PeteA

  • Can't establish Fiber link between 7609 and 4006

    Our Service Provider runs a 7609 and has Q in Q tunneling to provide us L2 vlan services over a MM Fiber link.
    We have a 4006 on 12.2.25 (EWA9) with a 6 port Gig blade WS-X4306-GB and are trying to establish connectivity on the link, but the conenction remains in down/down state, regardless of the configuration changes we have tried (speed nonegoiate, flowcontrol send/receive on/off, switchport mode trunk/desirable/auto).
    Oddly, the same Gbic and fiber feed, connected into a Cisco 3550 switch comes up with no problem.
    Below are the configurations of the Service Providers 7609, as well as the configuration of the 3550 (which worked), and the configuration we tried on the 4006.
    Please review and advise of any problem you see in the configurations.
    Thanks,
    -Scott
    Customer Cisco 3550 Gi0/2 (Worked to 7609):
    interface GigabitEthernet0/2
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 750,760
    switchport mode trunk
    speed nonegotiate
    Customer Cisco 4506 Gi3/2 (didn't work to 7609):
    interface GigabitEthernet3/2
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 750,760
    switchport mode trunk
    speed nonegotiate
    Service Providers Cisco 7609:
    interface GigabitEthernet3/3
    mtu 1546
    no ip address
    speed nonegotiate
    wrr-queue bandwidth 70 30
    switchport
    switchport access vlan 499
    switchport mode dot1q-tunnel
    switchport nonegotiate
    l2protocol-tunnel shutdown-threshold cdp 200
    l2protocol-tunnel shutdown-threshold stp 200
    l2protocol-tunnel shutdown-threshold vtp 200
    l2protocol-tunnel cdp
    l2protocol-tunnel stp
    l2protocol-tunnel vtp
    no cdp enable
    spanning-tree bpdufilter enable
    service-policy input 500mb

    We finally found the problem. Because the LEC put a MUX in the fiber path, we had to add the interface command "pos scramble-atm" to both our router and the ISP's end.
    Once both ends made this change, the circuit came up.

  • Cannot establish a link between MacPro and Windows 2003 Server

    I just had an issue where we had a server crash. This server supports several PCs, as well as two Macs. The server has been brought back online and can communicate with all of the PCs. However, neither one of the Macs can now communicate with the server.
    When I try to connect through the sidebar in the finder window, it will bring up the authentication window. But after I type in my password and hit enter, it gives me the message, "The alias "" could not be opened because the original item could not be found."
    When I try to connect through Go>Connect to Server, it gives me the message, "The Finder cannot complete the operation because some data in "" could not be read or written (Error code -36).
    My IT guy says that everything is alright with the server and that the problem has to be in the Mac settings. He does not know anything about Macs, however.
    Can somebody help me out with this issue?

    The only thing that comes to mind is a few settings in the Security Options of the Local Policy. Here's a link:
    http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x
    Not sure if that's it, but I hope it helps.

Maybe you are looking for

  • Can I replace the curent hard drive with a larger one in my early 08 Book

    OK - we have had this machine for alittle over a year. I bought it as a refurb from Mac (my personal favorite way to buy anything Mac) and we are running out of space. I have all of our pics on an external HD but still have the music on the main HD o

  • The struggle of creating a Custom ClassLoader for Native libraries

    Hello Everyone, I'm having a really hard time writing and using my own ClassLoader in a Java Applet. Context : As the this link shows - http://codethesis.com/tutorial.php?id=1 - loading and especially unloading native libraries through Java requires

  • Restore Ipod - not working?

    When I plug my ipod into my pc it's saying that the ipod is in recovery mode and i order to use it I have to restore it. No problem with that so follow the icons to restore it and complete that. The status bar on the ipod fills and the ipod restarts.

  • Create, but no changes in Infotype 0008

    Hi all, We have the following issue in HR authorization There's one role with some transactions of HR, some of them is PA30 and PA40. One of the rules at the company is, in transaction PA40, the person who made the admission of an employee, can regis

  • Why do the Icons on the desktop change positions intermittently

    When we open the screen on our mac book the icons will be out of the normal placed position at times. Is that a problem or just an announce? Thanks for your help!