Establishing a connection with Firewire 800

My computers: Macbook Pro 17, and PowerMac G5
Because my PowerMac G5 will not connect to my new 24-inch Apple Display, I would like to access files from my G5 via a Firewire 800 connection. How can I do this? When I connect the two computers with the Firewire cable, nothing happens.
Other: The G5's wireless antennae is missing, and I'm too far from the Time Capsule to establish an ethernet hookup. I have a bluetooth antenna, but for some reason it is not responding.

Other: The G5's wireless antennae is missing
Get that fixed - try to find a replacement on eBay as an example. Bluetooth isn't' going to be an option for your needs. Also look into ethernet over power lines...not a bad solution.

Similar Messages

Time Machine backup problems with firewire 800 since Mavericks

Since I installed Mavericks about a week ago, I have had problems with TM not working with my LaCie external drive. At best, it would not back up when the mac was awakened from sleep mode and in use. When I would open time machine preferences, I would see the "preparing for back up" prompt that would last forever. Not only was it doing that, I have found that it would freeze my mac. I figured this out when I was not able to get my mac to respond from the login screen. It was basically frozen and couldn't log on. I noticed the back up drive light flickering but nothing would happen even with waiting a long time. I finally figured out that shutting off the TM EHD would unfreeze the mac and it would start functioning normal again. This was happening with my external HD daisy chained to another external drive that contains my iPhoto, iMovie and Itunes files. That drive was also connected to the mac using firewire 800. I tried many different configurations, switched the order the drives were daisy chained, tried different cables and even directly connected the TM drive with firewire 800 to the mac, but the problems still persisted. The strange thing is that when I connect the TM drive through USB, it works flawlesly and no hanging up of the computer. Thats what Ive been forced to do. I have my other EHD connected directly through firewire 800 and it works fine. I only have one firewire 800 port, and since it works fine with my other LaCie drive, it makes me think its not the port or macs hardware? I can only guess this is a Time Machine issue or something wrong with my TM drive? I have been in contact with LaCie and given them all these details but I have not heard back yet on what they feel the problem is. I thought I would post this to see if anyone else had some experience with this problem.

Forgot to mention I did that. Completely erased and reformatted HD and then reconnected to TM. Didn't help. I did have the mac hang up while installing Mavericks and had to eventually shut off the external drive. It did that to me the firs time I tried to install Mavericks and I lost all my data because it did a clean install after that. I had another back up on CCC so I just restored from there. This time the update to Mavericks transferred my data. I have had TM hang up my mac in the past on occasion, but I was always able to shut down the drive and then the mac would return to normal. Perhaps I should try to erase and reformat again?

HD with FireWire 800 Recommendation/Suggestion

I'm looking for an external hard drive with FireWire 800 connectivity (ideally a Quad) to use for my Time Machine backup with MacBook Pro. Any thoughts or suggestions would be greatly appreciated.
Btw, here are a few that I've have seen recently:
1. $199.00 -- WESTERN DIGITAL MY BOOK STUDIO EDITION 500GB EXTERNAL QUAD. link: http://www.bhphotovideo.com/c/product/522057-REG/WesternDigital_WDH1Q5000N_500_GB_MyBook.html
2. $189.99 -- Iomega Professional 500GB 3.5" External Hard Drive - 7200, 8MB, FireWire 800, FireWire 400, USB 2.0. link: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=32893 33&CatId=2427
3. $229.95 -- From FireWire Direct: 500GB/7200rpm 3.5" Ultra IVs 'QUAD' FireWire800, USBv2.0 & eSATA Professional External Hard Drive Subsystem. link: http://www.firewiredirect.com/product/581/

I recommend the Rocstor 500GB or 750GB model 800AV...
http://www.rocstor.com/Products/rocpro-800av.html
I love it because it has an internal power suppy (so it accepts a standard universal power cable). That's great if you ever forget your power cable at home! Easy to scrounge up a spare!
Also it comes with a great travel case. Plus it has FW 800, 400, and USB 2 ports.
This is good because if you have it hooked up on FW 800, on your MacBook Pro, you will need to connect other FW perhiperals into the drive's FW 400 port insteat of the MBP's 400 port since you can't use the 400 and 800 ports at the same time due to the bus maximum being 800 MBS.

SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme

Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type:        Error
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              17806
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type:        Failure Audit
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              18452
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

Lion very slow starting apps with Firewire 800 drive mounted. Any ideas?

Lion very slow starting apps with Firewire 800 drive mounted.
When my Firewire 800 drive is in sleep mode, when I start up an app like MS Excel or Addressbook. I get a spining wheel and a delay before the app launches. Any ideas? Never happened in 10.6.

Long shot: What format is the drive?
Regards
TD

Mixing FireWire 400 with FireWire 800

How do I connect FireWire 400 Peripherals and FireWire 800 Peripherals to the single FireWire 800 port and preserve the FireWire 800 speed to the computer for the Firewire 800 Peripherals? (Obviously, the 400 speed peripherals cona only send and receive at 400 speed.)
My guess is that connecting the FireWire 800 peripherals to the computer and adding the 400 peripherals at the end of the 800 daisy chain may work. However, recalling the mixing things in other contexts (USB 1.x vs. 2.x and WiFi 802.11g vs. 802.11n) drags every device down to the slowest speed. Will that happen on a FireWire 800 and 400 daisy chain?
Anyone know of a FireWire 800 hub?

jnsail wrote:
How do I connect FireWire 400 Peripherals and FireWire 800 Peripherals to the single FireWire 800 port and preserve the FireWire 800 speed to the computer for the Firewire 800 Peripherals?
You cannot. If devices of different speeds are daisy-chained, the speed of the entire chain will drop to the speed of the slowest device, in this case FW400. A hub won't help.
The workaround is to get an ExpressCard FireWire adapter, and connect one set of devices to that, and the other set to the MBP's FW800 port.

Why does itune keep telling me it could not establish a connection with the software update server

i have an iphone 3g running on 3.1.3 firmware and every time i plug into my pc running windows 7 it says that it is contacting the software update sever then after about ten seconds it says that update failed could not establish a connection with the server i have tried to disable my firewalls completely and it seems that nothing works nothing is wrong with the iphone it sync's properly and works fine someone plz help me so i can update

Everybody is tryng to connect to apple,s servers. Try tomorrow, it will be quieter

The network adapter could not establish the connection with Oracle

I installed Oracle in my laptop (windows 2008), and install Hyperion 11.1.2, when I configure Hyperion, it pops up with "the network adapter could not establish the connection with Oracle"?

Hi,
This usually means that the connection details you have put in for Oracle are incorrect or Oracle can not be contacted.
Double check your configuration connection details and make sure you can access Oracle using them details.
Cheers
John
http://john-goodwin.blogspot.com/

Could not establish secure connection with server

Hi ,
We are not able to access our web service URL from Ipad Application on some of the network. We are receiving “could not establish secure connection with the server” message. We are able to access the same URL from other networks. Can you please suggest what can be possible Root cause and their suggested solution? We would appreciate your quick response..

hi Alfonso,
Editing the hosts file is easy. just need to use the CAS/CAM CLI and the vi test editor. You can google for instructions on how to use Vi.
To start assume we have a CAM and CAS with the hostname cam1 and cas1 respectively. the domain is mycompany.com and the ip addresses for the CAM and CAS is 192.168.10.1 and 192.168.15.2 respectively.
start with the CAM and view the hosts table
cat /etc/hosts
To check what domain u used to setup the CAM
cat /etc/resolver.conf
edit the hosts file so appears like so
192.168.10.1 cam1.mycompany.com cam1
192.168.15.2 cas1.mycompany.com cas1
Verify with 'cat /etc/hosts'
Make sure you can ping 'cas1' and 'cas1.mycompany.com' from cam1
Next edit the hosts file for cas1 so that it appears like so
192.168.15.2 cas1.mycompany.com cas1
192.168.10.1 cam1.mycompany.com cam1
Make sure you can ping 'cam1' and 'cam1.mycompany.com' from cas1
HTH
George

3rd gen iPod won't connect with firewire...how can I restore it?

As many others have had this problem, my iPod only charges when connected with firewire. When I connect with USB, it says "Use the iPod Software Updater application to restore the iPod to factory settings"
When I try the iPod Software Updater, it says I need to connect via Firewire.
Question 1: Any ideas on how to restore the iPod?
Question 2: Any ideas on how to get the firewire functional again?
Many thanks in advance

Answer to Question 1: - I connected the iPod with the USB, went to Disk Utility and erased the iPod. Now the iPod works with USB.
Question 2 is still unanswered. Ideas?

I cannot open my Yahoo Mail but everything else is OK. When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page. Safari can not establish secure connection with Yahoo Mail.

I cannot open my Yahoo Mail but everything else is OK. When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page. Safari can not establish secure connection with Yahoo Mail.

It sounds as though a script on the site, or an advertisement, is not working quite right...
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies using either of these. Save any pending work first.
While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

Reason 421: Failed to establish a connection with your ISP

I have an excelent connection to the internet, and i try with diferent version of cisco vpn client, I have windows vista, but the cisco vpn client sen me this message: Reason 421: Failed to establish a connection with your ISP, when i try to make a vpn connection.

Hi men thanks for your help i found the problem it was configure for a dial up connection and Im using ADSL connection.

Can not establish a connection with SQL

hey all,
i was trying to start with JDBC ,but i spent two days trying to establish a connection with SQL.
can anybody help me please, the problem is about the url string and driver name.
am completely lost with these stuff :(
thnx in advance,

stillAbeginner wrote:
am using Microsoft SQL server 2005, but i don`t know how to get or setup driver correctly.
please explain how.
Are you specifically using "localhost" as the server name and thus the database is on your client box? If not then SQL Server must be configured to accept such traffic before it will work.
Other than that the most common problems are
1. The port is wrong. It is either 1433 or 1434.
2. The server name(or IP) is not visible from client computer. Nothing you do in java nor MS SQL Server will fix this.
Printing the stack trace and posting it here provides more information for us to help.

Firefox says it can't establish a connection with any website I try I uninstalled and reinstalled it and get the same message

firefox says it can't establish a connection with any website I try. I uninstalled and reinstalled it and get the same message .tryed running it with the addons diabled that didn't work. so I uninstalled it again this time uninstalling all the settings and addons too. reinstalled it and got the same message.

See:
* http://kb.mozillazine.org/Error_loading_websites

Error - unable to establish JCO connection with SSO

Hello,
I have implemented XSS on WebDP and this is working fine. So my JCO connections SAP_R3_HumanResources must be configured correctly. However I have just done the 'GetFlight' BAPI tutorial and upon execution I get the error:
'com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCException: Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.sap.tut.wd.flightlist.model.FlightModel. Please assure that you have configured the RFC connections and/or logical system name properly for this model!'
CAUSED BY
'User not authenticated (is anonymous) - unable to establish JCO connection with SSO'
Can anyone help here?
Thanks
Mr.T

HI
GOOD
GO THROUGH THIS LINK WHICH CONTAINS THE A SINGLE SIGN-ON IN A COMPLEX SYSTEM LANDSCAPE.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/80fbc690-0201-0010-1aba-93d5c8232b4a
http://www.sap-press.de/download/dateien/1020/sappress_sap_security_authorizations.pdf
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff65b5a2-0a01-0010-5b97-e747192a1d49
THANKS
MRUTYUN

Establishing a connection with Firewire 800

Similar Messages

Maybe you are looking for