Establishing ELSTER/DATEV for ERP2005 systems

Hi!
I have 2 systems (ERP 2005) landscape and have to set up the ELSTER/DATEV approach for these systems.
The system landscape is:
DEV-system (Clients: 100 and 200)
PRD-system (Clients: 100)
We do not have SAP XI, so we need to use SAP Business Connector
Questions:
What is the difference between ELSTER and DATEV, should I set up both of them?
Do I need to set up the whole approach on each system (DEV, PRD) and each client (100, 200)?
What are the steps are necessary therefor?
Thank you ver much indeed!
regards
Thom

My German colleague tells me ELSTER is the electronic tax filing/ tax declaration interface and DATEV is the interface to export tax information / financial data. Both are specific to the German market.
I don't believe this is the correct forum to address this question. Maybe you could check with some of the middleware or interface teams for more inputs on how to set these up.
Sorry mate, can't help.
Cheers.

Similar Messages

Establishing of ELSTER/DATEV for ERP2005 systems

Hi!
I have 2 systems (ERP 2005) landscape and have to set up the ELSTER/DATEV approach for these systems.
The system landscape is:
DEV-system (Clients: 100 and 200)
PRD-system (Clients: 100)
We do not have SAP XI, so we need to use SAP Business Connector
Questions:
What is the difference between ELSTER and DATEV, should I set up both of them?
What are the steps are necessary therefor? (SAPCryptolib, SAP Business Connector, etc.)
Do I need to set up the whole approach on each system (DEV, PRD) and each client (100, 200)?
Thank you ver much indeed!
regards
Thom

My German colleague tells me ELSTER is the electronic tax filing/ tax declaration interface and DATEV is the interface to export tax information / financial data. Both are specific to the German market.
I don't believe this is the correct forum to address this question. Maybe you could check with some of the middleware or interface teams for more inputs on how to set these up.
Sorry mate, can't help.
Cheers.

Establishing ELSTER for ERP2005 systems

Hello!
I have 2 systems landscape (SAP ERP2005) and would like to establish ELSTER.
I do not have XI.
My questions are:
- which technical settings should be done for the establishment ELSTER?
- should Business Connector be installed, do I need installation key for this. Who can request them?
- should the whole settings be executed on the productive system and productive client?
- which settings can be done by SAP Basis and which by FI?
Thank you very much!
regards

My German colleague tells me ELSTER is the electronic tax filing/ tax declaration interface and DATEV is the interface to export tax information / financial data. Both are specific to the German market.
I don't believe this is the correct forum to address this question. Maybe you could check with some of the middleware or interface teams for more inputs on how to set these up.
Sorry mate, can't help.
Cheers.

WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

Hello,
We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML. It seems to me that some certificate
might be invalidated. Can anyone please point me in the right direction?
Thanks,
Mitul
TF215097: An error occurred while initializing a build for build definition :
Exception Message: One or more errors occurred. (type AggregateException)
Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
Inner Exception Details:
Exception Message: An error occurred while sending the request. (type HttpRequestException)
Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
Inner Exception Details:
Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
Inner Exception Details:
Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

Hi Mitul,
Thanks for your reply.
It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
Please share your TFS Server detailed environment information here. And share your
Build Service Properties dialog screenshot here.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Reporting services with R2 on DPM2012 - Could not establish trust relationship for the SSL/TLS secure channel

Hi everyone,
A somewhat similar question has been asked before by others but none of the answers given has helped me.I am attempting a DPM 2012 installation, which is failing at the "deploying reports" stage.My analysis of logs seems to point me in the direction of an SSL
error, which does not make sense since the configuration files say SSL is disabled (or at least, should be).
Here are the symptoms:
1.I am able to browse http://FQDN/Reports_MSDPM2012 folder from internet explorer
2.I am also able to browse http://FQDN/ReportServer_MSDPM2012 from internet explorer
3.The information given in the logs and relevant config files is shown below:
<<RSREPORTSERVER.CONFIG>>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSDPM2012</InstanceId>
<InstallationID>{d9b1c335-5842-4a81-9148-79184c38bf09}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>





<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions"
4.The DPM log file still appears to be using SSL even though i used reporting services configuration to remove SSL bindings:
running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException:
exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: The underlying connection was closed: Could
not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest,
Exception exception)
5:I do have an SCCM site on the default web site used by SMS clients but on different ports
I am stumped.Somebody please give some advice
Thank you

Hi
This is an old post but did you come right?

Project Management Question - timelines for Production system deployment

Hi
I need an expert advice on setting up timelines for establishing an Oracle Apps Production environment. We are implementing Oracle HR & Payroll at an organization.
Our system architecture is a 2-node application tier and 2-node DB tier (RAC). RAC is configured by another party and we only have to prepare the application tier (2 nodes)
We would be installing Oracle Apps R11i (11.5.10) with jserv load balancing on the 2-nodes
Can anyone suggest how much time this should take to install/configure & patching of the application tier (on 2 nodes)?
Regards
Saira

Duplicate post (check your other thread):
Project Management Question - timelines for Production system deployment
Re: Project Management Question - timelines for Production system deployment

Establishing ELSTER encryption in ECC 6.0

Hello!
I would like to set up the ELSTER encryption functionality in ECC 6.0.
Has some one experience, helpful information, technical steps (Tcodes), SAP notes for the following operations:
- establish ELSTER encryption
- establish Business Connector
- establish RFC-Verbindung
- establish electronic agency comunication
- to store settings for electronic agency comunication
- authorization
Thank you very much indeed!
Regards
Thom

Hi Thom,
Regarding establish RFC-Verbindung
http://help.sap.com/printdocu/core/Print46c/de/data/pdf/BCMIDAPIINTRO/CABFAAPIINTRO.pdf
establish Business Connector
http://www.thespot4sap.com/articles/SAP_XML_BC_Integration_Benefits.asp
For Tcodes
http://www.saptransactioncodes.com/l.html
Regards,
Kumar.

Set-IRMConfiguration failed with error "Cou ld not establish trust relationship for the SSL/TLS secure channel."

Hi, experts
I'm trying to configure a lab environment according tutorial http://www.msexchange.org/articles-tutorials/exchange-server-2010/compliance-policies-archiving/rights-management-server-exchange-2010-part3.html
After completing configuration, I execute cmdlet Set-IRMConfiguration -InternalLicensingEnabled $true, but get error
The remote certificate is invalid according to the validation procedure. ---> The underlying connection was closed: Cou
ld not establish trust relationship for the SSL/TLS secure channel. ---> Failed to get Server Info from https://exhv-65
94/_wmcs/certification/server.asmx.
+ CategoryInfo : InvalidOperation: (:) [Set-IRMConfiguration], Exception
+ FullyQualifiedErrorId : C810E449,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
Then I run cmdlet Test-IRMConfiguration -Sender [email protected] and get error
Results : Checking Exchange Server ...
- PASS: Exchange Server is running in Enterprise.
Loading IRM configuration ...
- PASS: IRM configuration loaded successfully.
Retrieving RMS Certification Uri ...
- PASS: RMS Certification Uri: https://server1/_wmcs/certification.
Verifying RMS version for https://server1/_wmcs/certification ...
- WARNING: Failed to verify RMS version. IRM features require AD RMS on Windows Server 2008 SP2 with the
hotfixes specified in Knowledge Base article 973247 (http://go.microsoft.com/fwlink/?linkid=3052&kbid=973247)
or AD RMS on Windows Server 2008 R2.
Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
//server1/_wmcs/certification/server.asmx. ---> System.Net.WebException: The underlying connection was clos
ed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authenticatio
n.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest async
Request, Exception exception)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequ
est asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Obje
ct state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
uests)
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
--- End of inner exception stack trace ---
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
rviceType serviceType)
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc()
OVERALL RESULT: PASS with warnings on disabled features
From the error message, this issue seem to related with SSL/TLS connection. So I go back to check configuration and find out a difference to tutorial. Current SCP url is https://server1/_wmcs/certification, but in tutorial it is https://server1:433/_wmcs/certification.
On my opinion, I don't think it is the real reason.
So, how can I resolve this error? Could you give me some suggestion? Thanks in advance.
System Info:
Windows Server 2008 R2 + Exchange Server 2010 SP3 RTM

Hi
Please have a try with the solution on this KB article
“Error message when you try to test access from the Microsoft Dynamics CRM E-mail Router: "Incoming Status: Failure - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel"”
http://support.microsoft.com/kb/954584/en-us
Cheers
Zi Feng
TechNet Community Support

"Could not establish trust relationship for the SSL/TLS secure channel"

During the configuration of DUET_E , when calling the DUET Application from SharePoint, the following error is shown :
"Could not establish trust relationship for the SSL/TLS secure channel with authority 'MYSAPNW702SERVER:8001'"
I have already seen the Post :
Error in DUET Configuration at SSL
This mentions the error, but does not provide any answers on resolution.
The DUET_E troublshooting guide suggests that the SAP Standard SSL Certificate is added to SharePoint Central Admin > Security > Manage Trusts
This has also been done.
We are using the Standard SAP SSL Self signed certificate - not one signed by an external CA.
Can anyone provide any guidance ?
Thanks in advance.

Hi Min,
reading through your first post the problem might be the CN of the certificate. If you used the Wizard or the default way to create a self signed certicate, it is probably created with the CN server.domain (the fully qualified name of the server).
However, when you created the BDC models the URLs pointing to the WSDL is probably only the servername (at least that is what I would assume after seeing your error message).
Because of that SharePoint calls the SAP Duet server with the severname, but the certificate presented by the SAP system is not the servername, but the fully qualified servername. Because of that -- although SharePoint trusts the certificate -- the URL and certificate do not match and you get the error "Could not establish trust relationship for the SSL/TLS secure channel with authority 'MYSAPNW702SERVER:8001"
If that is the case you have two options:
1) you go to STRUST and create a new SSL certificate that has a CN of only the servername. Then you export this certificate and trust it in SharePoint
2) or -- and this is the way I would recommend -- you try to adjust the URL used in the BDC model. Usually you get only the servername (and not the fully qualified DNS name) when you have not specified the profile parameter icm/host_name_full. Which URL is currently used when you start transaction SAML2 or SOAMANAGER? If you have not yet set icm/host_name_full, then give this a try.
Regards,
Holger.

Could not establish trust relationship for the SSL/TLS secure channel with authority

Hello everyone, I need to establish a connection between my HTTPS WCF hosted in Windows Azure Web Role and my Windows Store App Client. The service is actually exposed for testing purposes using a self-signed certificate.
I have installed the certificate in Personal and Trusted Root Certification Authorities in Current User and Local Manchine.
In the Windows Store App, I create the service reference pointing to the cloud https service, then edit the manifest and create a new declaration to Add a New Certificate, I checked Exclusive Trust and Auto select, pointing to Root storage name and
my self-signed certificate.cer.
The result is the following exception in the IntelliTrace stack:
Exception:Caught: "The remote certificate is invalid according to the validation procedure." (System.Security.Authentication.AuthenticationException)
A System.Security.Authentication.AuthenticationException was caught: "The remote certificate is invalid according to the validation procedure."
Time: 19/01/2015 04:42:33 p. m.
Thread:Worker Thread[17080]
Exception:Thrown: "Could not establish trust relationship for the SSL/TLS secure channel with authority 'appchallengewhi.cloudapp.net'." (System.ServiceModel.Security.SecurityNegotiationException)
A System.ServiceModel.Security.SecurityNegotiationException was thrown: "Could not establish trust relationship for the SSL/TLS secure channel with authority 'appchallengewhi.cloudapp.net'."
Time: 19/01/2015 04:42:34 p. m.
Thread:Worker Thread[17080]
Appreciate any help, to solve this with the approach of WCF Service Reference in Windows Store App.
Note:
If I call the HTTPS service using a Console App it works very good using the following the code:
ChannelFactory<IAgentService> factory = new ChannelFactory<IAgentService>("basicHttpBinding_IAgentService");
ServicePointManager.ServerCertificateValidationCallback = (sender, cert, chain, error) => true;
IAgentService wcfProxy = factory.CreateChannel();
Thanks in advance,
RC

Maybe not implemented.
https://social.msdn.microsoft.com/Forums/windowsapps/en-US/2dab2818-8f4c-4474-a7a1-db2cbfb40d40/accepting-client-certificate-for-https-connections?forum=winappswithcsharp

Could not establish trust relationship for the SSL/TLS secure channel with authority SharePoint ssis connectors

Hi All,
I am using SharePoint List Connectors to load the data from Sharepoint list to Sql server.
I have created an ssis package and attached to the SQL agent job in works fine
SharePoint Source dev url : http://company.dev.com (working fine)(http)
DB server:(server\instance)
I thought all i good and can test with the uat sharepoint url.
I have changed the configuration url yo point to uat.(https)
SharePoint Source dev url : https://companyuat.dev.com (working fine)
DB server:(server\instance)
Suddently it fails when with the following error:
In both the cases i am running the agent job from the same db server
DB server:(server\instance)
Error Message:
Could not establish trust relationship for the SSL/TLS secure channel with authority 'companyuat.dev.com'. ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Source: Data Flow Task SharePoint List Source [1] Description: System.ServiceModel.Security.SecurityNegotiationException: Could not establish trust relationship for the SSL/TLS secure channel with authority 'companyuat.dev.com'. ---> System.Net.WebException:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Is there is workaround to reslove this?Any inputs highly appreciated as it is time to move to production :(.
Thanks
Ravi
Ravi

This is the important error: The remote certificate is invalid according to the validation procedure.
Your SharePoint server certificate is invalid. You have to either correct your certificate or make your SSIS client machine explicitly trust the server certificate.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

Could Not Establish trust relationship for the SSL/TLS secure channel Sharepoint Web services

I am trying to updateList items into a sharepoint list from the xml document stored in my shared drive in remote server. To make that work i wrote down a Powershell Script that utilizes Sharepoint Webservices Api Updatelistitems function to perform the acitivity.
I ran the script over in Dev environment it works, Then i went into QA that Works too. At last i am now in PROD and agains ran the script i am now receicing following error:
New-WebServiceProxy : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel
All of my servers dev, QA and PROD web apps are encrypted by Https 443 using Cerified root certificate. Powershell script i am running are mirror copy. System accoutn i am using has owner privileages to sharepoint site and its list.
Am i missing something here, what is blocking this traffic i have no clue.
Thank You

are u using self singed certificate?
also check this http://www.poshpete.com/powershell/new-webserviceproxy-and-ssl
http://www.brainlitter.com/2012/03/13/sharepoint-2010-and-cert-trust-could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system

Hi,
I am getting error while enabling the WCF-Custom receive location:
MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system
I found solution over internet for regarding the above issue which was suggested that NETWORK SERVICE is not having required permission. Used subinacl with the following command (on Command prompt with elevated mode)
subinacl /service msdtc /grant="Network Service"=QSETIL
But the same resulted in error: Last Failed: msdtc - OpenService Error : 5 Access is denied.
Getting nowhere regarding this now. Please help

Hi Harkirat,
Have you tried
these steps to Enable Network Access Securely for MS DTC?
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Establish ELSTER in SAP ECC

Hello!
I would like to establish ELSTER encryption in my SAP ECC.
What are the technical steps/procedure/relevant Tcodes to do this?
Thank you very much!
regards!
Thom

Hi Jacob,
For AS400 environment as well 20% limit exists.
Refer SAP help for more details
http://help.sap.com/saphelp_40b/helpdata/EN/02/962824538111d1891b0000e8322f96/content.htm
Number of active work processes: 10
(AS/400 jobs in status RUN)
Number of page faults per active work process: 20 per second
Allows: 200 page faults per second
Paging overhead per work process: 200 ms per second
(accepted average response time of hard disk is 10 ms)
That corresponds to a paging overhead of 20%. The 20% limit should not be exceeded.
Hope this helps.
Regards,
Deepak Kori

Establishing ELSTER/DATEV for ERP2005 systems

Similar Messages

Maybe you are looking for