Establishing Lync Server 2013 on a Child Domain

Hi,
We want to establish Lync Server 2013 Enterprise Edition on a child-domain. I finished the installation. Now, if i add to users to child domain and enable from Lync Server Control Panel for test, users can be signed in. However, we use child domain for only
domain computers. We want to keep users on parent domain, not child domain.
I can enable users which are on parent domain, but users can not sign in. When i look Lync troobleshooting program, i got this error: "user is not sip enabled"
How can i solve this problem not adding users to child domain?

Check whether the SIP address is enabled for the user
Get-CSUser -Identity <Alias>
SipAddress : sip:[email protected]
Enable-CsUser –Identity "Raji" –RegistrarPool Pool01.Lync.com –SipAddress "sip:[email protected]" –SipDomain Lync.com
Verify the output
Get-CsAdUser | Select-Object DisplayName, SipAddress, UserPrincipalName
Or
Construct a SIP address using the user’s SamAccountName and domain name
The SamAccountName is the user’s logon name: it’s the kenmyer portion of litwareinc\kenmyer. To use the SamAccountName as the SIP address use the –SipAddressType parameter followed by the parameter value SamAccountName:
Enable-CsUser –Identity "Ken Myer" –RegistrarPool atl-cs-001.litwareinc.com –SipAddressType SamAccountName –SipDomain litwareinc.com
Note that you also need to include the –SipDomain parameter followed by the appropriate SIP domain. With both FirstLastName and SamAccountName you must explicitly indicate the SIP domain; Enable-CsUser won’t try to make a “best guess” at determining the domain
name for you.
Use the user’s email address as his or her SIP address
This is kind of a nice option: it simply grabs the user’s email address and uses that same value for his SIP address. (That way, users have just one address to remember.) To use this option, simply include the –SipAddressType parameter followed by the parameter
value EmailAddress:
Enable-CsUser –Identity "Ken Myer" –RegistrarPool atl-cs-001.litwareinc.com –SipAddressType EmailAddress
Reference: https://blogs.technet.com/b/csps/archive/2010/06/06/howtoenableusers.aspx
Exchange Queries

Similar Messages

Enable new Child Domain in Lync Server 2013

Hello All,
We are running Lync server 2013 in the Root Domain test.local. There are number of child domain enabled for Lync service . Eg: abc.test.local , xyz.test.local etc. Now i have a requirement to create new child domain and enable it for lync service.
So i created a new child domain (site1.test.local), then from lync shell i run below command to enable it.
Enable-CsAdDomain
–Domain site1.test.local –report c:\users\lyncadmin\Report1.html
Then i add the new SIP domain in topology builder in SIP doamin and
Simple URLs and publish the topology.
On AD all users are created in OU so i run below command to give privileges on OU:
Grant-CsOUPermission -Domain site1.test.local -ObjectType "User" -OU "OU=SITEUsers,DC=Site1,DC=TEST,DC=LOCAL"
After all the step , when i try to login the new users, Users are not logging , in Lync client logs it is giving below error:
4005;reason="Destination URI either not enabled for SIP or does not exist";source="LYNCFE13-02.TEST.LOCAL"
Please help to solve this issue .

I can see my child domain accounts in Lync control panel (enable user section) and all accounts are enabled. If i run below command then it show result = failure. But my others account are working.
PS C:\Users\administrator> Test-CSRegistration -UserSipAddress [email protected] -TargetFQDN xxxx.xxxx.localTarget Fqdn : xxx.xxx.local Result: Failure Latency : 00:00:00Error Message : 504, Server time-out Diagnosis: ErrorCode=1045,Source=LYNCFE-00.xxxx.xxxx,Reason=Local edge server pool is out of service,port=5061,pool-size=2,pool=xxx-Edges.xxxx.local Microsoft.Rtc.Signaling.DiagnosticHeader
Other accounts are giving SUCCESS msg and running without any issue.

Configuring Lync Server 2013 to be a partner Application for Exchange 2013

Hello Guys,
I just want to share my experience while configuring Lync server 2013 to be a partner Application for exchange 2013 sever.
As mentioned on technet you need to run Configure-EnterprisePartnerApplication.ps1 script that ships with Exchange 2013.
But when I tried to run the script as described on the technet article, I found it always fails with " the accepted domain is not valid"
I have checked my accepted domains many times and i found that there's no issues with my configured accepted domain.
So I started to review the script to find the issue and I found that the script was configured as below
$acceptedDomains = Get-AcceptedDomain ;
if ($acceptedDomains -eq $null)
WriteError ("There is no accepted domain so user can not be created.")
$acceptedDomain = $acceptedDomains[0].Name;
if($UseDomainController -eq $true)
$user = New-MailUser -Name $username -DomainController $DomainController -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true -DomainController $DomainController
else
$user = New-MailUser -Name $username -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true;
which is totally wrong as below:
firstly it makes $AcceptedDomain variable to equal the Name of the accepted domain.
Not all customers configure the name of the Accepted Domain to be the Domain Name.
Secondly it makes $AcceptedDomain variable to equal the name of the first Accepted Domain.
The first domain may be not the default Accepted Domain.
So I have configured the script as below
$acceptedDomains = Get-AcceptedDomain | ? {$_.Default -eq "True"} ;
if ($acceptedDomains -eq $null)
WriteError ("There is no accepted domain so user can not be created.")
$acceptedDomain = $acceptedDomains.DomainName;
if($UseDomainController -eq $true)
$user = New-MailUser -Name $username -DomainController $DomainController -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true -DomainController $DomainController
else
$user = New-MailUser -Name $username -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true;
I hope This help.
Thanks
Ahmed Fouad

Hi,
This is helpful, thanks for sharing.
Best regards,
Belinda Ma
TechNet Community Support

Please help me resolve the Lync server 2013 deployment error: "An error occurred while applying SQL script for the feature BackendStore."

I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
"An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
Administrators
CSAdministrator
Domain Admins
Domain Users
Enterprise Admins
Group Policy Creator Owners
RTCComponentUniversalServices
RTCHSUniversalServices
RTCUniversalConfigReplicator
RTCUniversalServerAdmins
Schema Admins
I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Found Parameter: Role Value master.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcxds validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcxds validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is detached.
Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
Attaching database failed because one of the files not found. The database will be created.
State of database rtcxds is DbState_DoesNotExist.
Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
Clean installing database rtcxds.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcshared validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcshared validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcshared.
Reading database version for database rtcshared.
Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
Thanks and Regards,
Thanh Le

Thanks Lạc
Phạm 2
I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue.
If any one using KVM here is detail article
We just give this option cache=‘writeback
using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks

How do I enforce "Show My Picture" instead of "Hide My Picture" in Lync Server 2013?

I was scouring TechNet and the web for a script that could perform the same task as one that I previously used for Lync 2010.
In Lync 2010, we had already used Lync policy to enforce that only the Active Directory photo could be used. One thing that we couldn't set via policy however was the ability to complete remove the "Hide My Picture" option in Lync 2010 client.
This left users with the ability to freely switch between showing the Corporate photo or no photo. I did eventually find and make use of script that constantly checked for this setting switch, then switched all users back to the desired "Show My Picture"
setting. I don't recall who wrote it, but it's easy to find on technet. As we started to move more and more users to our Lync 2013 enterprise pool, I noted that even though the script was running, the setting seemed to be changeable. A closer look revealed
that the script didn't function correctly against SQL for our 2013 pool.
I took the concept and applied it to Lync Server 2013 after studying the differences in Userdata. In Lync 2013, because UserData is in .zip, you need to convert it to 2010 format XML to use logic intended for Lync 2010. My script will extract 2013 data,
convert it to 2010, query for users who are set to "Hide My Picture" and then export any guilty users to an edited2010 XML. The script then converts this to 2013 Format .zip, and uploads the data for these users only. I chose to use Update-CSUserData
insted of Import-CSUserData as this avoids having to restart my Front End. I then use a scheduled task on my Front End server which runs this script every hour.
Please note: You can use this script, but I guarantee nothing about it's functionality, and I am not responsible for how you positively/negatively use it. You should always test things in a Lab Environment. Furthermore, this script was run on a relatively
smaller Enterprise system in which we are by default set to "Show My Picture" and already assigned as part of our user policy the ForceADPhoto attribute. This means that running the script is less intensive on my FE than say on a FE with 10,000 users
where none of the users were set to "Show My Picture". Please keep this in mind when planning to execute against your FE. You may want to edit my script and insert the -UserFilter or -WhatIf in the Export-CsUserData UpDate-CsUserData.
Anyways, I hope this solves the similar issue for many of you Lync 2013 administrators. Please feel free to share my work with others if it does, and also give this post some good feedback and/or mark my post as the answer to your problem.
Alas, here's the script (save it as a .ps1 , i.e. ForceShowMyPicture.ps1)
#Lync 2013 ForceShowMyPicture - Compiled by Octavio A. Serpa (Octavio-Admin on TechNet)
# Import Lync Module
Import-Module “C:\Program Files\Common Files\Microsoft Lync Server 2013\Modules\Lync\Lync.psd1"
###Variables To Set
#This variable is a folder where files will be temporarily written
$folderPath = “C:\Lync2013Scripts\Export”
#This is the FQDN of the pool in which the users you want to target reside
$poolFQDN = “<lyncpool.domain.local>”
###Done
#Message Out
Write-Host -ForegroundColor YELLOW “CHECKING THAT TEMP EXPORT FOLDER PATH EXISTS"
If (-not (Test-Path "$folderPath" -pathType container))
"ERROR: Your Export Directory doesn't exist!"
Exit
Write-Host -ForegroundColor Green “TEMP EXPORT FOLDER DOES EXIST"
Write-Host -ForegroundColor YELLOW “PRE-CLEANING OLD EXPORT/IMPORT FILES"
If (Test-Path "$folderPath\Lync2013UserData.zip") { Remove-Item "$folderPath\Lync2013UserData.zip" }
If (Test-Path "$folderPath\Lync2010UserData.xml") { Remove-Item "$folderPath\Lync2010UserData.xml" }
If (Test-Path "$folderPath\Lync2010EditedUserData.xml") { Remove-Item "$folderPath\Lync2010EditedUserData.xml" }
If (Test-Path "$folderPath\Lync2013EditedUserData.zip") { Remove-Item "$folderPath\Lync2013EditedUserData.zip" }
Write-Host -ForegroundColor Green “PRE-CLEANING COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “EXPORTING LYNC 2013 POOL USER DATA”
Export-CsUserData -PoolFqdn $poolFQDN -FileName $folderPath\Lync2013UserData.zip
Write-Host -ForegroundColor Green “EXPORT COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “CONVERTING LYNC 2013 USER DATA TO 2010 FORMAT”
Convert-CsUserData -InputFile "$folderPath\Lync2013UserData.Zip" -OutputFile "$folderPath\Lync2010UserData.xml" -TargetVersion Lync2010
Write-Host -ForegroundColor Green “CONVERSION COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “CHECKING THAT FORMAT CONVERSION WAS SUCCESSFUL AND .XML EXISTS”
If (-not (Test-Path "$folderPath\Lync2010UserData.xml" -pathType leaf))
"ERROR: Verify that $folderPath is writable!"
Exit
Write-Host -ForegroundColor Green “CONVERSION COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “LOADING XML”
$d = [xml] (Get-Content "$folderPath\Lync2010UserData.xml")
Write-Host -ForegroundColor Green “XML LOADING COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “CORRECTING AD PHOTO SETTING”
$changes = 0
$lastProcessedUser = $null
foreach ($hr in $d.HomedResources.HomedResource)
$found = 0
foreach ($c in $hr.Containers.Container)
  foreach ($p in $c.Publication)
   If ($p.CategoryName -eq 'contactCard' -and $p.InstanceNum -eq 6 -and $p.Data.contactCard.displayADPhoto -eq 'false')
    If ($hr.UserAtHost -ne $lastProcessedUser)
     "$($hr.UserAtHost) reset"
     $lastProcessedUser = $hr.UserAtHost
    $p.Data.contactCard.displayADPhoto = 'true'
    $p.Version = (([int] $p.Version) + 1).ToString()
    $p.PrevPubTime = $p.LastPubTime
    $p.LastPubTime = (Get-Date -Format s).ToString()
    $found = 1
    $changes++
If ($found -eq 0) { [Void]$d.HomedResources.RemoveChild($hr) }
Write-Host -ForegroundColor Green “AD PHOTO SETTING CORRECTIONS COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “Changes: $changes"
If ($changes -ne 0)
#Message Out
Write-Host -ForegroundColor YELLOW “RE-SAVING XML”
$d.Save("$folderPath\Lync2010EditedUserData.xml")
#Message Out
Write-Host -ForegroundColor YELLOW “CONVERTING LYNC 2010 .XML BACK TO 2013 .ZIP FORMAT"
Convert-CsUserData -InputFile "$folderPath\Lync2010EditedUserData.xml" -OutputFile "$folderPath\Lync2013EditedUserData.zip" -TargetVersion Current
#Message Out
Write-Host -ForegroundColor Green “CONVERSION BACK TO 2013 .ZIP FORMAT SUCCESSFUL"
#Message Out
Write-Host -ForegroundColor YELLOW “IMPORTING LYNC 2013 POOL DATA FOR CORRECTED USERS”
Update-CsUserData -FileName $folderPath\Lync2013EditedUserData.zip -Confirm:$false -Verbose
Write-Host -ForegroundColor Green “IMPORT COMPLETED SUCCESSFULLY"
Write-Host -ForegroundColor YELLOW “STARTING POST-IMPORT-CLEANUP OF EXPORT/IMPORT FILES"
If (Test-Path "$folderPath\Lync2013UserData.zip") { Remove-Item "$folderPath\Lync2013UserData.zip" }
If (Test-Path "$folderPath\Lync2010UserData.xml") { Remove-Item "$folderPath\Lync2010UserData.xml" }
If (Test-Path "$folderPath\Lync2010EditedUserData.xml") { Remove-Item "$folderPath\Lync2010EditedUserData.xml" }
If (Test-Path "$folderPath\Lync2013EditedUserData.zip") { Remove-Item "$folderPath\Lync2013EditedUserData.zip" }
Write-Host -ForegroundColor Green “POST-IMPORT-CLEANUP COMPLETED"
#Message Out
Write-Host -ForegroundColor Green “AD PHOTO SETTING SUCCESSFULLY UPDATED"

When I try to run this I get the follow error. Any thoughts?
Update-CsUserData : Unable to cast COM object of type 'System.__ComObject' to interface type
'Microsoft.Rtc.Interop.User.ICsUserManagement'. This operation failed because the QueryInterface call on
the COM component for the interface with IID '{D5ADD966-BDC3-4A8F-BFE8-6A59A9F74CB2}' failed due to the
following error: Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
At C:\Lync2013Scripts\ForceDisplayPhoto.ps1:113 char:1
+ Update-CsUserData -FileName $folderPath\Lync2013EditedUserData.zip -Confirm:$fal ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: ([email protected]:String) [Update-CsUserData], Invalid
   CastException
    + FullyQualifiedErrorId : Microsoft.Rtc.Management.AD.Cmdlets.ImportOcsUserDataCmdlet

Lync HP 4120 Sign in problems with Lync Server 2013

Hi, this is my second request for help, this with more information...
I`ll ready install the follow infrastructure: (I change the name of my organization for contoso)
Lync Server 2013 Installation with Enterprise mode with 1 front end : Pool: lync.contoso.com Front End: lyncfe01.contoso.com Back End: lyncsql01.contoso.com
I`ll ready install a PKI infrastructure with two tiers, the root offline and the subordnate ac.contoso.com
This with the defailt algorithm configuration RSA SHA1
My phones are HP 4120
In the Front End Server i configured the SCHANNEL registers:
EnableSessionTicket in 2
Send..etc in 0
Ok, the installation is ok, services are OK, Client login trough PC its OK, PSTN Configuration... (I can make a phonecall with the lync client of Office 365)
Commnd Checks:
When i run the command Test-CsPhoneBootstrap -PhoneOrExt 12345 -PIN 123456 -TargetFqdn lync.contoso.com
The result is:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:09.0559615
Error Message :
Diagnosis :
When i run the command Test-CsPhoneBootstrap -PhoneOrExt 12345 -PIN 123456 for
check the DHCP the result is:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:09.0559615
Error Message :
Diagnosis :
When i run the follow command
PS C:\Users\Administrator> $cred = Get-Credential
cmdlet Get-Credential at command pipeline position 1
Supply values for the following parameters:
Credential
PS C:\Users\Administrator> Test-CsClientAuth -TargetFqdn lync.contoso.com -UserSipAddress "sip:[email protected]" -UserCredential $cred
I got this:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:00.3431783
Error Message :
Diagnosis :
But.. when i use the same command but i remove the -targetFqdn for check the Dhcp i got this:
VERBOSE: Workflow Instance Id 'bca95636-af7b-4b0a-b43d-dba259294b2d', started.
VERBOSE: Command line executed is 'Test-CsClientAuth -UserSipAddress "sip:[email protected]" -UserCredential $cred
-Verbose'.
Target Fqdn :
Target Uri :
Result : Failure
Latency : 00:00:00
Error Message : 10060, A connection attempt failed because the connected party did not properly respond after a period
of time, or established connection failed because connected host has failed to respond 194.90.8.20:5061
Inner Exception:A connection attempt failed because the connected party did not properly respond after
a period of time, or established connection failed because connected host has failed to respond
194.90.8.20:5061
Diagnosis :
VERBOSE: Workflow 'Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow' started.
Workflow 'Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow' completed in '5.62E-05' seconds.
Target web service Url not provided. Will have to extract it from authentication challenge.
An exception 'Unable to establish a connection.' occurred during Workflow
Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow execution.
Exception Call Stack: at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
at Microsoft.Rtc.SyntheticTransactions.Activities.GetSTSUriActivity.InternalExecute(ActivityExecutionContext
executionContext)
at Microsoft.Rtc.SyntheticTransactions.Activities.SyntheticTransactionsActivity.Execute(ActivityExecutionContext
executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Sip.TcpTransport.OnConnected(Object arg)
'GetSTSUri' activity started.
Starting STS Uri Discovery...
ERROR getting STS Uri.
'UnRegister' activity started.
'UnRegister' activity completed in '3.12E-05' seconds.
VERBOSE: Workflow Instance ID 'bca95636-af7b-4b0a-b43d-dba259294b2d' completed.
VERBOSE: Workflow run-time (sec): 126.0548512.
The Real Problem is that my Lync HP 4120 Phone can't make a sign in, not from USB cable loging, nor with PIN authentification
When I try to make a login with the USB cable, I set the user and password and the phone says "Connecting to Lync".. "Downloading a certificate" ... "Installing certificate"... "Downloading Certificate"...
"Installing Certificate".. forever
When I try to make a login with PIN Authentification, the phone first displays the following:
Account used is not authorized, Please Contact your support team and then shows this:
An Account matching this phone number cannot be found. Please contact your support team.
The Pin authentification is enable
In the Lync Server Enable Kerberos Authentification, Enable Integrated Windows Authentification and Enable Certificate Authentification are enable
This is the configuration from DHCP
Starting Discovery ...
Sending Packet (Size: 284, Network Adapter: xx.xx.xx.xx, Attempt Type: Broadcast only)
--Begin Packet--
DHCP: INFORM (xid=130EA7FA)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 319727610
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = Xx.xx.xx.xx
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = FC15B4###--End Packet--
Received Packet
Sender:xx.xx.xx.xx:67, Size:363
--Begin Packet--
DHCP: ACK (xid=130EA7FA)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 319727610
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = xx.xx.xx.xx
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = FC15B4100289
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) XX.XX.XX.XX
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 17) enc:0 lync.contoso.com (00046C796E6306756E69736F6E026D7800)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 86) MS-UC-Clienthttpslync.contoso.com443%/CertProv/CertProvisioningService.svcÜNAP (010C4D532D55432D436C69656E7402056874747073030E6C796E632E756E69736F6E2E6D78040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536572766963652E737663DC034E4150)
DHCP: End of this option field
--End Packet--
Result: Success
DHCP Server : xx.xx.x.xx.
SIP Server FQDN : lync.contoso.com
Certificate Provisioning Service URL : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
thanks for all, hope somebody can help me with this problem.. i am going crazy...

Hi, i connected the Lync Phone to another switch and i update the firmware to the newest firmware and i got the same problem..
The lync phone download the certificate but cant install it and the still the same error with the SIP login
An Account matching this phone number cannot be found. Please contact your support team.

Lync Server 2013 Installation Error

Hello,
I am using my AD in Windows Azure VMs. I created new VM of A3 (4 cores, 7 GB Memory) Windows Server 2012 R2, Port 1433 MSSQL added, made it a member of Domain and planned to install first Lync Server 2013 on it.
In "Setup or Remove Lync Server Components" of "Install or Update Lync Server System", got an Red Coloured text "An error
occurred while applying SQL script for the feature BackendStore."
I have not enabled monitoring and archiving server in topology builder. I added "Network Service" and assign "Full Control" in Security Permissions of "C:\CsData" and "C:\LyncShare".
I executed the SQL Setup Wizard and upgraded any instance to 2012.
Please guide.
Thanks, Divyaprakash Koli

Is the Lync deployment in Azure as well? If so please check this
blog by Guy Bachar. Look for "Houston, we have a problem"
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Lync Sorted blog

Lync Server 2013 Standard Deployment: Cannot Open Service Control Manager...

Hi
thanks for any advice.I've just install Lync 2013 Standard as the steps in Technet,When I publish the topology,meet the error as listed.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.XdsDatabase'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync2012ek.ek2012.net\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Publisheracct Value EK2012\RTCUniversalServerAdmins.
Found Parameter: Replicatoracct Value EK2012\RTCUniversalConfigReplicator.
Found Parameter: Consumeracct EK2012\RTCUniversalReadOnlyAdmins.
Found Parameter: Role Value master.
Trying to connect to Sql Server lync2012ek.ek2012.net\rtc. using windows authentication...
Exception Stack:
Type: System.InvalidOperationException, Message: Cannot open Service Control Manager on computer 'lync2012ek.ek2012.net'. This operation might require other privileges.
Type: System.ComponentModel.Win32Exception, Message: Access is denied.
best regards,
George
George Guo

please verify your computer name while you creating FQDN pool FQDN of Server name
example
computer name
is server1
domain name is abc.ae
so,
your FQDN pool name will be server1.abc.ae
problem solved :)

Microsoft Lync Server 2013 Control Panel "Navigation to the webpage was canceled"

i'm facing this issue on the last 2 days.My Lync server 2013 was seted up a month ago and everything went fine on the installation.
Lync server 2013 on Windows 2008R2 SP1.
I could login to the Control Panel (using domain administrator credentials), create users (including myself) manage clients etc.
i didn't login to Lync server for at least a week, beacause i didin't have any other user to add. When time came to add a new user to Lync, i got this error whenever i try to open Control Panel.
i didn't change anything during this time, so i'm really confused by this.
i've checked everything from the start and all seem to be in place.
i also can't open the admin page from the local host as i get an error
HTTP error 403.4 - Fobidden.
i tried also to create new certificates for Lync server, but issue remains.
Also, any solutions i've read for this problem doesn't work as everything is placed correct as other users suggest.
Can anyone please help me further?
Cheers,
Elias

Ok I had the same problem, I missconfigured the admin simple url in topology builder (TB) which I fixed. Also the default certificate in the FE server did not have a SAN entry for the "admin" simple url (which was an error).
So I corrected the admin address in TB republised it, redid step two on the FE, reissued adn replaced the old cert. The new cert had the corrected admin simple url. Checked IIS on the server and made sure that the internal web server had the
right certificate, restarted IIS.
The default Lync control pannel still did not come up, I rebooted the server, the closest I got was being prompt for my credential which it did not accept.
Finally control pannel came up with https://localhost/cscp but I got prompted becuase of a certificate missmatch:
but it still worked!!! Very very wierd. I have not changed CA servers. I am interested about why this happened....
[email protected] BK
Bob Krangle

Lync Server 2010迁移升级Lync Server 2013时Lync Server控制面板无法打开Lync Server 2013

Lync Server 控制面板打开Lync Server 2010正常，打开Lync Server 2013报错未授权：授权失败。前端服务器日志显示如下：
日志名称:          Lync Server
来源:            LS Remote PowerShell
日期:            2014/4/1 10:40:41
事件 ID:         35005
任务类别:          (3500)
级别:
错误
关键字:
经典
用户:
暂缺
计算机:           lync13fe01.byd.com
描述:
远程 PowerShell
无法从存储中读取 RBAC 角色信息。
远程 PowerShell
在尝试读取用户的 RBAC 角色信息时遇到问题。Retry failed。异常: SqlConnectionException。失败原因:
用户 'DL\LYNC13fe01$' 登录失败。。堆栈跟踪:
在 Microsoft.Rtc.Management.Store.Sql.XdsSqlConnection.ReadDocItems(ICollection`1 key)
在 Microsoft.Rtc.Management.ScopeFramework.AnchoredXmlReader.Read(ICollection`1 key)
在 Microsoft.Rtc.Management.WritableConfig.AnchoredXmlSchemaCache.get_Item(ScopeClass scopeClass)
在 Microsoft.Rtc.Management.Authorization.OcsRunspaceConfiguration.GetRolesFromStore(ManagementConnection connection)
原因:
发生失败可能是由于读取管理存储时出现某个权限问题。
解决方法:
确保服务器是加入域的计算机且能够查询 Active Directory。
事件 Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="LS Remote PowerShell" />
    <EventID Qualifiers="52652">35005</EventID>
    <Level>2</Level>
    <Task>3500</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-01T02:40:41.000000000Z" />
    <EventRecordID>7400</EventRecordID>
    <Channel>Lync Server</Channel>
    <Computer>lync13fe01.byd.com</Computer>
    <Security />
</System>
<EventData>
    <Data>Retry failed</Data>
    <Data>SqlConnectionException</Data>
    <Data>用户
'DL\LYNC13fe01$' 登录失败。</Data>
    <Data>
在 Microsoft.Rtc.Management.Store.Sql.XdsSqlConnection.ReadDocItems(ICollection`1 key)
在 Microsoft.Rtc.Management.ScopeFramework.AnchoredXmlReader.Read(ICollection`1 key)
在 Microsoft.Rtc.Management.WritableConfig.AnchoredXmlSchemaCache.get_Item(ScopeClass scopeClass)
在 Microsoft.Rtc.Management.Authorization.OcsRunspaceConfiguration.GetRolesFromStore(ManagementConnection connection)</Data>
</EventData>
</Event>

Hi,
This forum is only English Supported.
Did you use the same account to open Lync Server 2013 control panel with Lync Server 2010 Control Panel?
If not, please check the account that is assigned to the CsAdministrator role.
On your Lync Server 2013 Front End Server, open IIS, expand Lync Server Internal Web Site. Click cscp, then click Browse *:443 in Actions panel to check if you can open Lync Server 2013 Control Panel.
Check your Domain Controller is available. You can ping it on Lync Server 2013 Front End Server.
Lisa Zheng
TechNet Community Support

Rename lync server 2013 enterprise edition pool name

Im working in testing environment ,my domain controller fqdn name and my lync server 2013 enterprise pool name was same.i have to change my pool name .please give some suggestion

once a Topology has been published you can not change the FQDN.
Also you can refer shah-Khan answer, it will be helpful for you
http://social.technet.microsoft.com/Forums/lync/en-US/47d4e101-4f7b-4115-8f44-897eb5410acb/need-to-change-a-published-fqdn-lync-pool-for-lync-enterprise-2010?forum=ocsplanningdeployment
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

2 Problems using lync client andriod conncet to lync server 2013 ( contacts status is Presence Unkhown)

Hello Everybody
I have installed lync server 2013 in my lab . Everything is ok . but internal mobile client in my LAN can not work with lync !
I installed lync server 2013.
I create 2 DNS record to lync-server : lyncdiscoverinternal and lyncdiscover.
clients on PC (windows) work and everything is ok . when user use Anroid phone , cleint connect to lync server and list connnact list .BUT when Send IM to contact or start video call come this error :
" Failed to process the server response.Please try again . if the problem persists,contact your support team."
This is first problem. Another problem is the contact list for every user status is "Presence Unkhown" !
No online , No Offline and all of contact status "Presence Unkhown" !
If i had to config mobility in in lync server 2013 ? or mobility service built-in in lync server 2013 ?
please help me .

Hi Meysam Halvaei,
As Thamara mentioned, you need to deploy reverse proxy.
Lync 2013 mobility clients are using a separate dedicated Ucwa parameter the URL is the same web services location as provided by the
External/Ucwa parameter.
You need to have a look at the following diagram.
The Lync 2013 mobile client will need to connect with the external web services. The way Lync is designed this communication is always established using HTTPS/TCP 443, so the traffic
will need to pass through a reverse proxy or similar service that will take this communication and forward it to the server hosting the external web services, now using port 4443 instead.
Best regards,
Eric

RPC server is unavailable. (Exception from HRESULT: 0x800706BA) Lync Server 2013 Mirroring Configuration

Hi,
I am trying to Configure Mirroring in Lync server 2013, when in am selecting Install Database in Topology builder im able to install the Database in Principal but failing while installing the Mirroring following the detail.
▼ Install-CsMirrorDatabase Failed
└ Connection: Data Source=BPDBLSQWMV01.domain.com\IMPRINCIPAL;Failover Partner=BPDBLSQWMV02.domain.com\IMMIRROR;Initial Catalog=xds;Integrated Security=True 23-01-2014 22:53:34
└ ▼ InstallMirrorDatabaseCmdlet.StartMirroring 23-01-2014 22:53:34 Failed
└ Error: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
▼ Details
└ Type: COMException
└ ▼ Stack Trace
└ at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at Microsoft.Rtc.Management.Deployment.MirrorUtils.GetSqlServerAccount(String server, String instanceName)
at Microsoft.Rtc.Management.Deployment.TopologyParser.PopulateDatabasesForSqlInstance(ISqlInstance sqlInstance)
at Microsoft.Rtc.Management.Deployment.TopologyParser.FindDatabasesForMachine(IMachine machine)
at Microsoft.Rtc.Management.Deployment.TopologyParser.FindDatabasesForFqdn()
at Microsoft.Rtc.Management.Deployment.TopologyParser.GetDbListToMirror()
at Microsoft.Rtc.Management.Deployment.TopologyParser.get_DbInfoList()
at Microsoft.Rtc.Management.Deployment.InstallMirrorDatabaseCmdlet.StartMirroring()
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog(Action action)
23-01-2014 22:54:16 Error
└ Error: An error occurred: "System.Runtime.InteropServices.COMException" "The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)" 23-01-2014 22:54:16 Error
Firewall is turned off and can able to configure Mirroring Manually in SQL Server by creating a test database.
▼ Install-CsMirrorDatabase Failed
└ Connection: Data Source=BPDBLSQWMV01.domain.com\IMPRINCIPAL;Failover Partner=BPDBLSQWMV02.domain.com\IMMIRROR;Initial Catalog=xds;Integrated Security=True 23-01-2014 22:53:34
└ ▼ InstallMirrorDatabaseCmdlet.StartMirroring 23-01-2014 22:53:34 Failed
└ Error: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
▼ Details
└ Type: COMException
└ ▼ Stack Trace
└ at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at Microsoft.Rtc.Management.Deployment.MirrorUtils.GetSqlServerAccount(String server, String instanceName)
at Microsoft.Rtc.Management.Deployment.TopologyParser.PopulateDatabasesForSqlInstance(ISqlInstance sqlInstance)
at Microsoft.Rtc.Management.Deployment.TopologyParser.FindDatabasesForMachine(IMachine machine)
at Microsoft.Rtc.Management.Deployment.TopologyParser.FindDatabasesForFqdn()
at Microsoft.Rtc.Management.Deployment.TopologyParser.GetDbListToMirror()
at Microsoft.Rtc.Management.Deployment.TopologyParser.get_DbInfoList()
at Microsoft.Rtc.Management.Deployment.InstallMirrorDatabaseCmdlet.StartMirroring()
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog(Action action)
23-01-2014 22:54:16 Error
└ Error: An error occurred: "System.Runtime.InteropServices.COMException" "The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)" 23-01-2014 22:54:16 Error

"The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)" error may occurs.There can be a few reasons for this error:
It was an issue with RPC ports, verify Firewall opened the full range and Try to run setup completed.
The remote computer is blocked by the firewall.
Solution: Open the Group Policy Object Editor snap-in (gpedit.msc) to edit the Group Policy object (GPO) that is used to manage Windows Firewall settings in your organization. Open
Computer Configuration, open Administrative Templates, open
Network, open Network Connections, open Windows Firewall, and then open either
Domain Profile or Standard Profile, depending on which profile you want to configure. Enable the following exception: "Allow Remote Administration Exception" and "Allow File and Printer Sharing Exception".
Host name or IP address is wrong or the remote computer is shutdown.
Solution: Verify correct host name or IP address.
The "TCP/IP NetBIOS Helper" service isn't running.
Solution: Verity that "TCP/IP NetBIOS Helper" is running and set to auto start after restart.
The "Remote Procedure Call (RPC)" service is not running on the remote computer.
Solution: Verity that "Remote Procedure Call (RPC)" is running and set to auto start after restart and.
The "Windows Management Instrumentation" service is not running on the remote computer.
Solution: Verity that "Windows Management Instrumentation" is running and set to auto start after restart.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Lync Server 2013 - CSAdForest Fails

I am attempting to install a new fresh install of Lync 2013.I receive the following error when trying to run prepare current forest.
> Prepare Forest
Enable-CSAdForest -Verbose -Confirm:$false -Report "C:\Users\admin\AppData\Local\Temp\Enable-CSAdForest-[2014_08_26][20_08_20].html"
Creating new log file "C:\Users\admin\AppData\Local\Temp\Enable-CSAdForest-64e5e013-c161-448f-af8e-f617a276c3ec.xml".
Enable the Active Directory forest to host Lync Server 2013 deployments.
Prepare Forest Active Directory settings execution failed on an unrecoverable error.
Creating new log file "C:\Users\admin\AppData\Local\Temp\Enable-CSAdForest-[2014_08_26][20_08_20].html".
WARNING: Enable-CSAdForest failed.
WARNING: Detailed results can be found at "C:\Users\admin\AppData\Local\Temp\Enable-CSAdForest-[2014_08_26][20_08_20].html".
Command execution failed: Length of the access control list exceed the allowed maximum.
I found one other thread
here, but it didn't give a resolution. Any help would be much appreciated.
Thanks!

Hi,
This issue may cause of Invalid access control entries (ACEs) for CN=RTC Service
Try to do the following path to solve the issue:
Click Start, click Run, type ldp, and then click OK.
In the LDP console, click the Connection menu, click Connect, type domain controller name, and then click OK.
On the Connection menu, click Bind, type the credentials of the domain administrator, and then click OK.
On the View menu, click Tree.
In the tree view interface, for BaseDN drop-down list, select the appropriate domain context, such as " CN=Configuration,DC=office,DC=contoso,DC=com," and then click OK.
Under CN=Configuration,DC=<domainname>,DC=com, locate to the object CN=Services, CN=Configuration,DC=office,DC=contoso,DC=com"
Under CN=Services, CN=Configuration,DC=office,DC=contoso,DC=com", locate to the object "CN=RTC Service,CN=Services,CN=Configuration,DC=office,DC=contoso,DC=com".
Right-click the object in step 7, click Advanced, select Security Descriptor, make sure that the SACL option and the "Text dump" option are unchecked and then click OK.
This will open a new window with security descriptor details
In the middle pane of the Security descriptor Window, select and delete all the access control entries (ACEs) that have “\0ADEL:” at the end in the Trustee column. Multiple ACEs can be selected and then click Delete ACE to delete them.
Close the security descriptor as soon as you delete the corresponding ACE's
Close the LDP console.
Then prepare Forest again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Backing Up and Restoring Lync Server 2013/OCS 2007 R2 Co-existence Environment

Hello
I am seeking tips on how to build a replica of a Lync 2013/OCS 2007 R2 production pilot Co-existence environment in a test lab.
Lync 2013 is a standard Edition Pool
OCS 2007 R2 is an Enterprise Pool
Here is what I think...Is this feasible ? appreciate any other idea
1. Get Active Directory to Test Environment
For OCS 2007 R2 Servers
2. Use LCScmd on OCS 2007 R2 Servers to backup Global\Pool\Computer specific settings
3. Backup OCS 2007 R2 on Backend SQL Database
4. Restore data from steps 2 and 3 to equivalent servers created and prepared in test environment
For Lync 2013 SE Servers
5. Use the Lync 2013 Backup and Restore Process to bring up Lync Server 2013 into the test environment
http://technet.microsoft.com/en-us/library/hh202192.aspx
David

That should do it, as you said you'll need Active Directory as well so these accounts line up with something.
It may be easiest to restore into your virtual environment using virtual snapshots or Windows backups and fixing any corruption that may have occurred by restoring what you've backed up.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Establishing Lync Server 2013 on a Child Domain

Similar Messages

Maybe you are looking for