Establishing Windows update after OS crash & recovery

Hello: After running a recovery of Windows XP professional and updating it to SP3, I am unable to establish contact Windows Update to download remaining fixes. Ran MS "Fixit" App, but no luck. Tried to upgrade MS Explorer to 8 from 6 and no luck.
Any thoughts or ideas would be appreciated.

Please post windowsupdate.log file.
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Similar Messages

HP Pavilion dv6 1334us won't start after windows update, stuck in Error Recovery

My computer is an HP Pavilion dv6 1334us with 32bit-windows 7. The computer did automatic updates and when it started up said there was another one avaliable through WIndows Updater. I installed the update and it said the computer needed to restart for the update to take effect. I choose to restart and the computer wouldn't boot back up, it boots to the 'Windows Error Recovery' screen where my options are 'Launch Startup Repair (recommended)' and 'Start Windows Normally'. When I select the repair, it says it loads windows files, then goes back to the error recovery screen. When I choose to start normally, it freezes the second it trys to start, flashes a blue screen and then returns to the Error Recovery page again.

Please follow the steps in the following document to troubleshoot and fix the boot issue that you are facing.
Overview of Troubleshooting Startup Problems (Windows 7, Vista, XP): http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Please let me know the results so that I can try helping you further. Thank you.
!-------------------Please click the white star in the blue box to give KUDOS if this answer was helpful or clarified your question or issue.
If my answer solved the issue, then please click on the Accept as solution button. Thank you-----------------------------------------------------------------!
I am an HP Employee but I am not speaking on behalf of HP. The opinions and views that I express here are my own.

Windows 8.1 Professional x64: Windows will not run Windows Update after fresh install

Greetings everyone. I'm having a strange issue that I can't seem to figure out. I'm developing an image with the following specs:
Hardware:
Dell XPS 12 Ultrabook Convertible
Haswell i7
8 GB RAM
256 SSD HD
Software:
Windows 8.1 Professional x64
Problem description:
After formatting and partitioning the hard drive (UEFI) with a corporate copy of Windows 8.1 x64, the laptop is booted up in Audit mode. No OEM drivers or software is installed. Windows is then activated to the KMS server and verified.
I then connect to a hotspot (no proxy required) and open up IE 11. I click tools and select Windows Update. The laptop then searches and searches for updates and never finds any. I've let it search for over 10 hours. The laptop never
returns an error message.
Troubleshooting performed:
1. I've tried different copies of Windows 8.1 - same result.
2. I've tried installing the OS with different types of media (external hd and multiple bootable USB drives) - same result.
3. I've disable the Windows Update service, deleted the contents of the SoftwareDistribution folder, restarted the Windows Update service and rebooted laptop - same result
4. I've installed this copy of Windows 8.1 on different models of laptops with no OEM drivers or software installed - same result.
5. I've installed all of the OEM device drivers in the correct order and ensured that the device manager is clear of bang signs - same result.
6. Date and time is set correctly.
Has anyone else experienced this with Windows 8.1 x64? If I take a copy of Windows 7 x64 or 8 x64 and install it on this laptop, it updates Windows without any issues. The problem seems to be with Windows 8.1.
Thank you in advance for any help you can provide.

2014-03-04 13:49:52:826
888 9f8
Misc =========== Logging initialized (build: 7.9.9600.16403, tz: -0800) ===========
2014-03-04 13:49:52:826
888 9f8
Misc = Process: C:\Windows\system32\svchost.exe
2014-03-04 13:49:52:826
888 9f8
Misc = Module: c:\windows\system32\wuaueng.dll
2014-03-04 13:49:52:826
888 9f8
Service *************
2014-03-04 13:49:52:826
888 9f8
Service ** START ** Service: Service startup
2014-03-04 13:49:52:826
888 9f8
Service *********
2014-03-04 13:49:52:842
888 9f8
Agent * WU client version 7.9.9600.16403
2014-03-04 13:49:52:842
888 9f8
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-03-04 13:49:52:842
888 9f8
Agent * Access type: No proxy
2014-03-04 13:49:52:842
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:49:52:842
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 13:49:52:842
888 9f8
Agent * Network state: Connected
2014-03-04 13:49:52:858
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:49:52:858
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 13:49:53:045
888 9f8
DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2014-03-04 13:49:53:045
888 9f8
DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-03-04 13:49:53:045
888 9f8
DtaStor Data store successfully created
2014-03-04 13:49:53:061
888 9f8
Agent *********** Agent: Initializing global settings cache ***********
2014-03-04 13:49:53:061
888 9f8
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-03-04 13:49:53:061
888 9f8
Agent * WSUS server: <NULL>
2014-03-04 13:49:53:061
888 9f8
Agent * WSUS status server: <NULL>
2014-03-04 13:49:53:061
888 9f8
Agent * Target group: (Unassigned Computers)
2014-03-04 13:49:53:061
888 9f8
Agent * Windows Update access disabled: No
2014-03-04 13:49:53:076
888 9f8
WuTask WuTaskManager delay initialize completed successfully..
2014-03-04 13:49:53:076
888 9f8
Report CWERReporter::Init succeeded
2014-03-04 13:49:53:076
888 9f8
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-03-04 13:49:53:076
888 9f8
DnldMgr Download manager restoring 0 downloads
2014-03-04 13:49:53:092
888 9f8
AU ########### AU: Initializing Automatic Updates ###########
2014-03-04 13:49:53:092
888 9f8
AU AIR Mode is enabled
2014-03-04 13:49:53:092
888 9f8
AU # AU is not configured yet
2014-03-04 13:49:53:092
888 9f8
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 13:49:53:092
888 9f8
AU # Accelerated install is required
2014-03-04 13:49:53:092
888 9f8
Agent Switching to hardware-verified ClientId.
2014-03-04 13:49:53:092
888 9f8
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
2014-03-04 13:49:53:108
888 9f8
AU AU finished delayed initialization
2014-03-04 13:49:53:108
888 8c4
IdleTmr Incremented idle timer priority operation counter to 1
2014-03-04 13:49:53:108
888 13c
DnldMgr Asking handlers to reconcile their sandboxes
2014-03-04 13:49:57:239
888 af8
AU ########### AU: Setting new AU options ###########
2014-03-04 13:49:57:239
888 af8
AU Setting AU Approval Type to 4
2014-03-04 13:49:57:239
888 af8
AU # Policy changed, AU refresh required = Yes
2014-03-04 13:49:57:239
888 af8
AU # Approval type: Scheduled (User preference)
2014-03-04 13:49:57:239
888 af8
AU # Auto-install minor updates: Yes (User preference)
2014-03-04 13:49:57:239
888 af8
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 13:49:57:239
888 af8
AU # Accelerated install is required
2014-03-04 13:49:57:239
888 af8
AU AU Refresh required....
2014-03-04 13:49:57:239
888 af8
AU AU setting next detection timeout to 2014-03-04 21:49:57
2014-03-04 13:49:57:239
888 af8
AU AIR Mode is enabled
2014-03-04 13:49:57:239
888 af8
AU AIR Mode is disabled
2014-03-04 13:49:57:239
888 af8
AU Accelerate Install required state reset
2014-03-04 13:49:57:239
888 af8
AU Triggering Online detection (interactive)
2014-03-04 13:49:57:239
888 9f8
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 13:49:57:239
888 9f8
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 13:49:57:239
888 9f8
AU All AU searches complete.
2014-03-04 13:49:57:239
888 9f8
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 13:49:57:239
888 9f8
AU AU setting next detection timeout to 2014-03-04 22:19:57
2014-03-04 13:49:57:239
888 9f8
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 13:53:34:838
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:53:34:838
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:54:16:402
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:54:16:417
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:58:48:942
888 6d4
IdleTmr Decremented idle timer priority operation counter to 0
2014-03-04 13:58:56:990
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:58:57:022
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:57:272
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:58:58:830
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2014-03-04 13:58:58:846
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:58:877
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:58:58:892
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:59:267
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:59:01:937
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:59:01:937
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:59:01:953
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 14:08:49:957
888 9f8
AU ########### AU: Uninitializing Automatic Updates ###########
2014-03-04 14:08:50:007
888 9f8
WuTask Uninit WU Task Manager
2014-03-04 14:08:50:219
888 9f8
Service *********
2014-03-04 14:08:50:219
888 9f8
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-03-04 14:08:50:219
888 9f8
Service *************
2014-03-04 14:13:11:111
888 ba4
Misc =========== Logging initialized (build: 7.9.9600.16403, tz: -0800) ===========
2014-03-04 14:13:11:111
888 ba4
Misc = Process: C:\Windows\system32\svchost.exe
2014-03-04 14:13:11:111
888 ba4
Misc = Module: c:\windows\system32\wuaueng.dll
2014-03-04 14:13:11:111
888 ba4
Service *************
2014-03-04 14:13:11:111
888 ba4
Service ** START ** Service: Service startup
2014-03-04 14:13:11:111
888 ba4
Service *********
2014-03-04 14:13:11:126
888 ba4
Agent * WU client version 7.9.9600.16403
2014-03-04 14:13:11:126
888 ba4
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-03-04 14:13:11:126
888 ba4
Agent * Access type: No proxy
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 14:13:11:126
888 ba4
Agent * Network state: Connected
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 14:13:11:142
888 ba4
Agent *********** Agent: Initializing global settings cache ***********
2014-03-04 14:13:11:142
888 ba4
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-03-04 14:13:11:142
888 ba4
Agent * WSUS server: <NULL>
2014-03-04 14:13:11:142
888 ba4
Agent * WSUS status server: <NULL>
2014-03-04 14:13:11:142
888 ba4
Agent * Target group: (Unassigned Computers)
2014-03-04 14:13:11:142
888 ba4
Agent * Windows Update access disabled: No
2014-03-04 14:13:11:142
888 ba4
WuTask WuTaskManager delay initialize completed successfully..
2014-03-04 14:13:11:142
888 ba4
Report CWERReporter::Init succeeded
2014-03-04 14:13:11:142
888 ba4
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-03-04 14:13:11:142
888 ba4
DnldMgr Download manager restoring 0 downloads
2014-03-04 14:13:11:142
888 ba4
AU ########### AU: Initializing Automatic Updates ###########
2014-03-04 14:13:11:142
888 ba4
AU AIR Mode is disabled
2014-03-04 14:13:11:142
888 ba4
AU # Approval type: Scheduled (User preference)
2014-03-04 14:13:11:142
888 ba4
AU # Auto-install minor updates: Yes (User preference)
2014-03-04 14:13:11:142
888 ba4
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 14:13:11:142
888 ba4
Agent Switching to hardware-verified ClientId.
2014-03-04 14:13:11:142
888 ba4
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
2014-03-04 14:13:11:158
888 ba4
AU AU finished delayed initialization
2014-03-04 14:13:11:158
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:13:11:158
888 764
IdleTmr Incremented idle timer priority operation counter to 1
2014-03-04 14:13:11:158
888 10c
DnldMgr Asking handlers to reconcile their sandboxes
2014-03-04 14:13:13:353
888 764
AU Triggering AU detection through DetectNow API
2014-03-04 14:13:13:353
888 764
AU Triggering Online detection (interactive)
2014-03-04 14:13:13:353
888 ba4
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 14:13:13:353
888 ba4
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 14:13:13:353
888 ba4
AU All AU searches complete.
2014-03-04 14:13:13:353
888 ba4
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 14:13:13:353
888 ba4
AU AU setting next detection timeout to 2014-03-04 22:43:13
2014-03-04 14:13:13:353
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:43:13:405
888 ba4
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 14:43:13:405
888 ba4
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 14:43:13:405
888 ba4
AU All AU searches complete.
2014-03-04 14:43:13:405
888 ba4
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 14:43:13:405
888 ba4
AU AU setting next detection timeout to 2014-03-04 23:13:13
2014-03-04 14:43:13:405
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:47:37:066
888 764
IdleTmr Decremented idle timer priority operation counter to 0

How to fix Windows update after refresh?

ENVY dv7, Windows 8. After refreshing Windows, Windows update is stuck at 0%

Hi Diaz418198,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY dv7 Notebook and getting a screen on startup at 0%. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices. If that does not help try to turn on the computer you start to press F11 repeatedly till the menu opens. You can do a system restore.
Hope this is helpful.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Can I still uninstall any windows updates after clean up the winsxs folder by dism on Win2008 R2 SP1?

Hi,
Just a general question about Dism, does the cmd below only focus on serivce pack clearn up or I wont able to uninstall any windows updates at all after the clean up?
dism.exe /online /cleanup-image /spsuperseded
Regards
Anders

Hi,
The service pack cannot be uninstalled after this command is completed.
Clean Up the WinSxS Folder
http://technet.microsoft.com/en-us/library/dn251565.aspx
How to reclaim space after applying Windows 7/2008 R2 Service Pack 1
http://blogs.technet.com/b/joscon/archive/2011/02/15/how-to-reclaim-space-after-applying-service-pack-1.aspx
Hope this helps.

Lenovo Solution Center does not sense or allow Windows Update after Windows 10 upgrade

Also see: https://forums.lenovo.com/t5/Lenovo-A-B-C-N-S-Flex-and/Lenovo-Solution-Center-says-Windows-Update-needed-Windows-10/m-p/2136161#M6832 I'm having exactly the same issue as the user who started the thread linked above. After installing Windows 10 (and having no particular issues with the installation), LSC won't leave me alone about needing to run Windows Update. But when I click the Launch button provided, nothing happens. LSC is also recommending I update drivers and things, but the link provided to the Lenovo website also doesn't work. I had to run Windows Update and find the updated drivers on the Lenovo site myself. I happen to have a G505s, but the issue is obviously not restricted to one model.

Maybe a Lenovo server is down. Check again later or tomorrow.
Of course it might be that your firewall or other protection software is blocking the application from communicating with the Lenovo server...
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

How do I retrieve emails from windows mail after a crash?

I've just had to reload vista & all my old files are stored in a folder called 'windows.old' inlcuding a windows mail folder. I'm trying to retrieve all the emails that were in windows mail before everything crashed on me, does anybody know how to do this?
Thanks in advance

I agree with Akuma. It is definitely not Toshiba related issue and you should try to check some Microsoft forum and try to find final answer.

Reinstalling Photoshop CS6 on Windows 7 after computer crash

Hi there,
My laptop has just been returned from repair after having been wiped clean due to a computer crash. I am just wondering what I have to do to reinstall CS6 since I am unable to return any license as it was deleted along with everything else. Can I simply reinstall it again without a problem? TIA for any advice
Dascha007

Contact support to reset activations if necessary.
Mylenium

T500 - Windows Update no longer works after using factory recovery disks.

I'm running Windows 7 32bit. I needed to restore my T-500 hard drive because of a fatal windows registry error caused by a 3rd party registry cleaner/tuner software... Windows 7 was DOA .
I used the factory recovery disks I created after I first fired up the laptop in April this year, all went well, Windows 7 booted up, and I went through the "Starting Widows for the first time" setup dialog, Windows 7 sucessfully activated... also verfifed it on the Microsoft website.
Went into control panel to have windows update pull down all of the critical updates released after I got my Thinkpad and I got a pop up saying "windows update cannot currently check for updates because the service is not running. You may need to restart your computer."
I checked... the windows update service is running, so is BITS. Following suggestions from Microsoft support, I have 1)deleted the softwaredistribution folder from C:\windows, 2) run their "fixit tool", 3) renamed the CatRoot2 folder in C:\windows'system32, all to no avail each time I tried to use windows update after each "fix".
I decided to check here if anyone here has gone down this path before and ask what fixed it?
I'm waiting for Microsoft support to reply to my last email informing them the last instructions to rename the CatRoot2 folder and retry windows update failed. They now have a copy of my windowsupdate.log file sent to them.
How about it... does this situation sound familiar to anyone?
Thanks.

I run into the same problem with fresh installation of W7 Pro on T530 with 1TB samsung disk.
This solution worked for me:
    Running check for updates will trigger this error message:
“Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer.”
Solution:
1.    Go to Administrative Tools/Services, and stop the Windows Update service.
2.    Then go to the folder c: /Windows/SoftwareDistribution and delete all of the files and folders.
3.    Then go back to Services and restart the Windows Update service which will recreate all of those folders again.
4.    Then manually run the Update Service and everything should work.

Please help!!! Cannot run Windows Update in Win 7 Pro after changing new hard-drive. (X201s)

Hi everyone,
I have been using my thinkpad x201s for more than one year by now. And recently I change a new and larger hard drive for my laptop. When I tried the thinkpad rescue and recovery disc on the new hard drive, everything works fine except that I cannot run Windows Updates after the installation was finished. The recovery DVDs were burned directly from the original image stored in the computer when the first I received my laptop last year.
Every time when I try to run the Windows Update, it shows the following: "Windows Update cannot currently check for updates, because the service is not running, you may need to restart your computer."
I restarted my computer later but nothing changed. Can't run Windows Updates and can't even install IE9.
I then moved back to my old hard drive and everything is normal, no problem with Windows Updates. I also tried to create a back-up image by running win 7 Backups and Restore. Later when I changed back to the new drive and followed the instructions to restore my system from the image I created earlier in a USB drive, it worked except that still the system can't run Windows Updates program.
I'm now getting very confused and upset, is it something to do with the software copyright? It's been a week now and I tried to Google the similar problem but no solutions work here. All I want to do is moving my current system to the new hard drive so that I can continue to use my laptop but it just failed updating every time.
Could anyone kindly tell me what to do when changing hard drive in order to avoid the problem I'm dealing with? Sorry I'm not a pro type user and just want my laptop to work appropriately.
My warranty has already expired so I guess the Lenovo Technical Hotline wouldn't answer my questions anymore. Please help!! Much appreciated.
Thanks so much in advance!!

I'm not sure this is the issue, but from your description, it seems as though all you have to do is activate the windows update service. If I were you, I'd search for "Services" in the start menu, open it and look for "Windows Update". Check in its properties that it is set to "Automatic (Delayed)", if it isn't, set it, and start the service, you should then be able to check for updates, be careful though that none of your other programs aren't stopping the service, usually these programs are there to "optimize your performance" or "boost your system",...
Hope this helps.

PATCH TUESDAY SEPT 10 WINDOWS UPDATE CRASHED MY SOFTWARE

MY WORD, EXCEL DOCUMENTS ARE CORRUPT.
SYSTEM RESTORES GOING BACK TO SEPT 4TH ARE NOT WORKING. I GET A MESSAGE SAYING THE RESTORE DID NOT WORK. WHEN I LOG BACK ONTO MY LAPTOP, I HAVE A WINDOW SAYING THE RESTORE WAS SUCCESSFUL AND ALL SEEMS TO WORK WELL.
HOWEVER, WHEN I REBOOT, FILES ARE CORRUPT. I'VE NOTICED THAT DURING THE REBOOT, WINDOWS PERFORMS UPDATES.
DON'T WANT TO ATTEMPT MANUFACTURER'S RESTORE AS I BELIEVE IT WILL ERASE ALL MY DATA.
DID ANYONE HAVE THE SAME PROBLEM AND HOW DID YOU FIX IT?
THINKING OF CONTACTING HP TO REINSTALL SOFTWARE. IF SOMEONE EXPERIENCED AND SUCCESSFULLY SOLVED THE PROBLEM, I WOULD LIKE TO HEAR FROM YOU. THANK YOU.

Hi
No Need to panic there some other users who are facing similar issues after doing the windows update.
What you can do is turn of windows update for some time so that the update does not go through again and Microsoft will have a fix patch or update very soon. You can Turn On windows updates after a week or 15 days by that time Microsoft would have updated a patch on the update.
http://windows.microsoft.com/en-in/windows/turn-automatic-updating-on-off#turn-automatic-updating-on...
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Window Update 8.0 to 8.1

Sir,
There are window 8 is installed in my G6 Notebook now i want to update my window 8 to window 8.1. i have completed download the updatioin of window 8.1 but after completed download system required to restart to b configure the laptop.
but after its restart its not complete configure after long time. aprox 12 hour. i restarted manualy. the error come to show the window can not be updated. please sugest me how could i do update my window 8 to window 8,1

@Kushi ,
Hello and welcome to the HP support forums. What you will have to do here to fix the issue is to do a system recovery back to the way it was when it was new. Use this link to help you with this.
Performing an HP system recovery (Windows 8)
After doing the recovery retry the upgrade to windows 8.1.
Post back and let me know how things went.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

After hdd crash, ORA-12518 on new connect

hi,
We have oracle 10g on 32 bit windows system, after hdd crash and replace (with data back from mirror hdd) we get errors ora-03114 ORA-00604 ORA-04030 on one instance. Instance works, but memory used by still grow up. When oracle process reach 1,5 GB we get errors ORA-12518 on new connect. I find data files with strange names (probably recreated by oracle) like O1_MF_SYSAUX_4935PW2G_.DBF for tablespaces: TEMP, SYSAUX, SYSTEM and USERS. I create new temp tablespace.
Can I repair somehow this instance?

I get errors from alert_[instance_name].log
Here is log from one start to another:
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 300
sga_max_size = 1577058304
__shared_pool_size = 150994944
__large_pool_size = 8388608
__java_pool_size = 8388608
__streams_pool_size = 0
nls_language = POLISH
nls_territory = POLAND
sga_target = 1258291200
control_files = E:\ORADATA\SZPITAL\CONTROLFILE\O1_MF_4935PFPY_.CTL, E:\ORADATA\FLASH_RECOVERY_AREA\SZPITAL\CONTROLFILE\O1_MF_4935PFWS_.CTL
db_block_size = 8192
__db_cache_size = 1082130432
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_create_file_dest = E:\oradata
db_recovery_file_dest = E:\oradata\flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=szpXDB)
job_queue_processes = 10
audit_file_dest = E:\ORADATA\ADMIN\SZPITAL\ADUMP
background_dump_dest = E:\ORADATA\ADMIN\SZPITAL\BDUMP
user_dump_dest = E:\ORADATA\ADMIN\SZPITAL\UDUMP
core_dump_dest = E:\ORADATA\ADMIN\SZPITAL\CDUMP
db_name = szpital
open_cursors = 600
pga_aggregate_target = 214748364800
PMON started with pid=2, OS id=3264
PSP0 started with pid=3, OS id=2796
MMAN started with pid=4, OS id=2876
DBW0 started with pid=5, OS id=476
LGWR started with pid=6, OS id=2236
CKPT started with pid=7, OS id=2468
SMON started with pid=8, OS id=1908
RECO started with pid=9, OS id=516
CJQ0 started with pid=10, OS id=1792
MMON started with pid=11, OS id=1180
MMNL started with pid=12, OS id=2264
Tue Jun 21 08:12:34 2011
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jun 21 08:12:34 2011
alter database mount exclusive
Tue Jun 21 08:12:38 2011
Setting recovery target incarnation to 1
Tue Jun 21 08:12:38 2011
Successful mount of redo thread 1, with mount id 3878653042
Tue Jun 21 08:12:38 2011
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Tue Jun 21 08:12:38 2011
alter database open
Tue Jun 21 08:12:39 2011
Beginning crash recovery of 1 threads
Tue Jun 21 08:12:39 2011
Started redo scan
Tue Jun 21 08:12:39 2011
Completed redo scan
345 redo blocks read, 83 data blocks need recovery
Tue Jun 21 08:12:39 2011
Started redo application at
Thread 1: logseq 50745, block 3
Tue Jun 21 08:12:39 2011
Recovery of Online Redo Log: Thread 1 Group 4 Seq 50745 Reading mem 0
Mem# 0 errs 0: E:\ORADATA\SZPITAL\ONLINELOG\LOG4.ORA
Tue Jun 21 08:12:39 2011
Completed redo application
Tue Jun 21 08:12:39 2011
Completed crash recovery at
Thread 1: logseq 50745, block 348, scn 4013269634
83 data blocks read, 83 data blocks written, 345 redo blocks read
Tue Jun 21 08:12:39 2011
Thread 1 advanced to log sequence 50746
Thread 1 opened at log sequence 50746
Current log# 5 seq# 50746 mem# 0: E:\ORADATA\SZPITAL\ONLINELOG\LOG5.ORA
Successful open of redo thread 1
Tue Jun 21 08:12:39 2011
SMON: enabling cache recovery
Tue Jun 21 08:12:40 2011
Successfully onlined Undo Tablespace 26.
Tue Jun 21 08:12:40 2011
SMON: enabling tx recovery
Tue Jun 21 08:12:40 2011
Database Characterset is EE8ISO8859P2
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=17, OS id=3612
Tue Jun 21 08:12:42 2011
db_recovery_file_dest_size of 2048 MB is 0.38% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Tue Jun 21 08:12:42 2011
Completed: alter database open
Tue Jun 21 08:43:47 2011
Process startup failed, error stack:
Tue Jun 21 08:43:47 2011
Errors in file e:\oradata\admin\szpital\bdump\szp_psp0_2796.trc:
ORA-27300: operacja zależna od systemu operacyjnego: niepowodzenie spcdr:9261:4200 - stan: 997
ORA-27301: Komunikat o błędzie systemu operacyjnego: Pokrywająca się operacja We/Wy jest w toku.
ORA-27302: bł±d wyst±pił w: skgpspawn
Tue Jun 21 08:43:48 2011
Process J000 died, see its trace file
Tue Jun 21 08:43:48 2011
kkjcre1p: unable to spawn jobq slave process
Tue Jun 21 08:43:48 2011
Errors in file e:\oradata\admin\szpital\bdump\szp_cjq0_1792.trc:
Dump file e:\oradata\admin\szpital\bdump\alert_szp.log
Tue Jun 21 08:50:23 2011
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Dodatek Service Pack 3
CPU : 2 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:2676M/3071M, Ph+PgF:4753M/4961M, VA:1938M/2047M
Tue Jun 21 08:50:23 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.

Windows Update tasks in Task Scheduler (Windows 8.1)

In the Task Scheduler under Windows Update there are a few tasks :
AUFFirmwareinstall
AUScheduledinstall
AUSessionConnect
Scheduled Start
Scheduled Start with Network
The status of the 1st , 2nd and 3rd is as unable.
With the next 2 there are following problems : the result after run is :
Scheduled Start : (0x420) and Scheduled Start with Network : ok (0x0) or 1st is ok and 2nd 0x420
Would appreciate an advice or comments how to make them work properly.
Best regards, EwaGosia

Hi Yolanda,
Thank you very much for your attention and reply. At status of the tasks under Windows Update after 1st planned run /today in the morning/ has looked as follows :
AUFFirmwareinstall, AUScheduledinstall and AUSessionConnect as disabled and
Scheduled Start : (0x420) and Scheduled Start with Network : ok (0x0).
Have noticed that at app. the same time Scheduled Start with Network run in the Control Panel - Windows Update there is information about the last research with no result/no updates found , so it seems it is working.
After this this both tasks were planned to start next 2nd time later today and the result for both is now:
Scheduled Start : (0x420) and Scheduled Start with Network : (0x420).
The next start has been planned for tomorrow morning (it is made by the system in the Task scheduler and I can not change).
Will look if the system can install automatically the updates when find as till now I made it simply from Windows Update in control Panel to click "install". My laptop is quite new and would like to check if the system can fix automatic installation
of next Windows 8.1 Updates.
Would appreciate if you still have some comments.
Thanks and best regards, Ewa

Will Windows XP still get Windows Update download?

I am thinking of wiping out an XP Home netbook and re-installing it from scratch. I understand Microsoft is not supporting Windows XPs any more. Will the newly re-installed Windows XP get automatic Windows update download from Microsoft of
whatever Microsoft has already developed.

Yes, it will. As per MS : "There are no current plans to remove existing Windows XP security updates from Windows Update after end of support on April 8, 2014,"
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Establishing Windows update after OS crash & recovery

Similar Messages

Maybe you are looking for