Estimation of an Object while prepareing specs ?

Hi All,
How can we estimate the complexity of an object while preparing technical or functional specs.
Thank you in advance.
Regards
Harish

Harish
While estimating The more waightage goes to based on previous experience then complexity of the objects. Again complaxity depends on experience.
Thanks
Sat

Similar Messages

An error occurred while preparing the installation. Try running the application again

I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install PROJECT:Install-846
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA PROJECT:InstallAssistant-476.8
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
*****This is where the timer starts saying “”About a minute remaining”*****
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
      "Kernel Cache" = "/.IABootFiles/kernelcache";
      "Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******           Path: /Volumes/Install OS X Mavericks
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******     Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
Thanks in advance!

Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
First, my specs
Secondly, I am running an aftermarket 500 GB drive.
Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
And finally, here is the seeminly unavoidable error message.
Also, other things I've tried now are
installing it from the "show package contents area",
mounting said DMG and trying to install from there.
installing a package file called "upgradeos.pkg"
no luck.

Talent Search-Trex- ESH_Cockpit-Error while preparing

Hello,
I am trying to configure TREX for talent search. But while trying to create the search object connector using ESH_Cockpit, I am getting the message 'Error while preparing' for all the connectors exept the connector HTRMC Person. These Connector is working. For an example here is the protocoll for indexing the connector HTRMC central person which is one who doesn't work:
29.07.2014 14:01:18 Step 001 gestartet (Programm ESH_SE_CONNECTOR_MOD_BGD, Variante &0000000000009, Benutzername RPCI280)
29.07.2014 14:01:19 Verarbeitungsschritt: Vorbereitung
Informationsmeldungen (1)
29.07.2014 14:01:19 Details zur Umgebung: TREX Version 7.10.58.00, Destination: TREX_DE1, SAP-Release 740
29.07.2014 14:01:19 Verarbeitungsschritt: Inaktive Konnektormetadaten Ã¤ndern
Fehlermeldungen (56)
29.07.2014 14:01:27 ZugehÃ¶rige Anforderungen fÃ¼r Objekttyp HRTMC_CENTRALPERSON, Knoten OBJID:
29.07.2014 14:01:27 Navigations-ID 4830F27A2F260115E10000000A421694 muss mit $NAV_ beginnen
Fehlermeldungen (1)
29.07.2014 14:01:27 Es ist eine Ausnahme aufgetreten
29.07.2014 14:01:27 Fehler beim Aktualisieren des Konnektors
29.07.2014 14:01:27 Job wurde nach System-Exception ERROR_MESSAGE abgebrochen
Thanks for help,
Jürgen

Hi Jürgen,
this is not much information. Which EHP you are using? EHP7 ?
please delete all Connectors and try to use backend report ESH_ADM_INDEX_ALL_SC..mark all checkboxes and select software component: EA-HRRXX
If this does not help you can get more information if you start fopr each connector the report with the correspnding variant as mentioned in the log. E.g.:
ESH_SE_CONNECTOR_MOD_BGD variant &0000000000009 ( pleease use alwys the last variant in the log.) This will gif you futher information.
best regards
Martin Hastik

TREX - Embedded Search - Error While Preparing

Hi,
I'm trying to activate the "Help Center: Link to File in Network Folder" in the connector administration cockpit (transaction ESH_COCKPIT).
The issue that I'm having is that when is trying to prepare the indexing it terminates with "Error While Preparing".
Job log:
14.06.2014 11:49:03 Job started
14.06.2014 11:49:03 Step 001 started (program ESH_SE_CONNECTOR_MOD_BGD, variant &0000000000009, user ID TREX_RFC)
14.06.2014 11:49:04 RFC destination has errors
14.06.2014 11:49:04 Job cancelled after system exception ERROR_MESSAGE
Screenshot:
I tested the RFC and is working fine.
I tried to find aditional information in the logs but I don't see anything more.
I have the TREX 7.1 Revision 58.
Please, I need to resolve this asap.
Any help is appreciated!!
Carlos

Hi Siriram,
Thanks for your reply!
1) Yes, is on and everything is in green.
2) The connection of the TRExadmin is working and it looks fine:
I fixed the error last night selecting the option below: "Reset user Settings for Running Application":
But now when I select the object connector "Help Center: Link to File in Network Folder" to schedule a indexing, the following error is presented:
14.06.2014 23:13:04 Job started
14.06.2014 23:13:04 Step 001 started (program ESH_IX_CRT_INDEX_OBJECT_TYPE, variant 7FB75954635D4D, user ID CJM)
14.06.2014 23:13:04 Start Indexing For:
14.06.2014 23:13:04 Object Type: HC_LINK_FILE
14.06.2014 23:13:04 Connection GUID: 0050569410FB1ED3BCF9E3BC3299F411
14.06.2014 23:13:04 Logical System: QASCLNT205
14.06.2014 23:13:08 Error passing parameters to FILE_GET_NAME_USING_PATH
14.06.2014 23:13:08 Help Center: Logical path for search does not exist or contains errors
14.06.2014 23:13:08 Job cancelled after system exception ERROR_MESSAGE
Where I have to put the path of my network folder?
Thanks for the help!!
Carlos

When I try to install yosemite, it says "an error has occurred while preparing the installation. Please open the application again."

I currently have Mavericks Version 10.9.5. I have a 1.8 GHz Intel Core i5. My total storage is 250.14. I have an 8 gigabyte memory. I have done everything
When I try to use the Install OSX Yosemite, it says, "an error occurred while preparing the installation. Please open the application again."
I have gone to many websites, and have reset the PRAM, tried to change the date, but it was correct.

ov 22 10:38:30 Anonymous InstallAssistant[1800]: Linking self-contained dmg into mutable product
Nov 22 10:38:30 Anonymous InstallAssistant[1800]: link failed: 13 (Permission denied)
Nov 22 10:38:30 Anonymous InstallAssistant[1800]: Opening /Applications/Install OS X Yosemite.app/Contents/SharedSupport/InstallESD.dmg
Nov 22 10:38:32 Anonymous InstallAssistant[1800]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
Nov 22 10:38:33 Anonymous InstallAssistant[1800]: Extracting Boot Bits from Inner DMG:
Nov 22 10:38:33 Anonymous InstallAssistant[1800]: Failed to delete existing kernelcache: Error Domain=NSCocoaErrorDomain Code=513 "“kernelcache” couldn’t be removed because you don’t have permission to access it." UserInfo=0x608000671280 {NSFilePath=/OS X Install Data/kernelcache, NSUserStringVariant=(
Remove
), NSUnderlyingError=0x60800004a110 "The operation couldn’t be completed. Permission denied"}
Nov 22 10:38:33 Anonymous InstallAssistant[1800]: Ejecting disk images
Nov 22 10:38:41 Anonymous InstallAssistant[1800]: Failed to remove mutable product /OS X Install Data
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: @(#)PROGRAM:Install PROJECT:Install-846
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: @(#)PROGRAM:IA PROJECT:InstallAssistant-532
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Hardware: MacBookAir5,2 @ 1.80 GHz (x 4), 8192 MB RAM
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Running OS Build: Mac OS X 10.9.5 (13F34)
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: TMPDIR=/var/folders/h5/fj7f4yjd2vbbz2qdf_3v1pcc0000gp/T/
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: SHELL=/bin/bash
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: HOME=/Users/s210095
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: USER=s210095
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: LOGNAME=s210095
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: SSH_AUTH_SOCK=/tmp/launch-Yb3V5E/Listeners
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: Apple_PubSub_Socket_Render=/tmp/launch-sqyXdH/Render
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: __CF_USER_TEXT_ENCODING=0x1F6:0:0
Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: __CHECKFIX1436934=1
Nov 22 10:41:38 Anonymous InstallAssistant[2252]: Using distribution archive from /Applications/Install OS X Yosemite.app/Contents/SharedSupport/OSInstall.mpkg
Nov 22 10:41:40 Anonymous InstallAssistant[2252]: Configuring products from SharedSupport folder
Nov 22 10:41:40 Anonymous InstallAssistant[2252]: Install is double-dmg. Not adding chunklist to download list.
Nov 22 10:41:40 Anonymous InstallAssistant[2252]: Using product <OSInstallDVDProduct> based on media at /Applications/Install OS X Yosemite.app/Contents/SharedSupport at distance 5
Nov 22 10:41:40 Anonymous InstallAssistant[2252]: Using product <OSInstallESDProduct> based on distribution at /Applications/Install OS X Yosemite.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Nov 22 10:41:40 Anonymous InstallAssistant[2252]: Checking Software Update catalog URL http://swscan.apple.com:80/content/catalogs/others/index-10.9-mountainlion-lion- snowleopard-leopard.merged-1.sucatalog
Nov 22 10:41:40 Anonymous InstallAssistant[2252]: No available package ref for compatibility update. Ignoring.
Nov 22 10:41:44 Anonymous InstallAssistant[2252]: Using product <OSSoftwareUpdateCatalogProduct> from product keys (null) at distance 25
Nov 22 10:41:48 Anonymous InstallAssistant[2252]: LSExceptions [0x6080000a6120] unloaded
Nov 22 10:41:54 Anonymous InstallAssistant[2252]: IATool launched
Nov 22 10:41:54 Anonymous InstallAssistant[2252]: Connected to IATool 274900
Nov 22 10:41:55 Anonymous InstallAssistant[2252]: No available package ref for compatibility update. Ignoring.
Nov 22 10:41:55 Anonymous InstallAssistantTool[2282]: GetModel: model = MacBookAir; major rev = 5; minor rev = 2
Nov 22 10:41:55 Anonymous InstallAssistantTool[2282]: Machine appears to be AR capable
Nov 22 10:41:55 Anonymous InstallAssistantTool[2282]: Not an FDE volume, won't stash FDE
Nov 22 10:41:56 Anonymous InstallAssistantTool[2282]: Staged principal user cookie to /var/db
Nov 22 10:41:56 Anonymous InstallAssistant[2252]: Preventing machine sleep.
Nov 22 10:41:56 Anonymous InstallAssistant[2252]: Using product IA_PKSecureNetEnabledProduct <file:///OS%20X%20Install%20Data/> at distance 5
Nov 22 10:41:56 Anonymous InstallAssistant[2252]: Using mutable product path: /OS X Install Data
Nov 22 10:41:56 Anonymous InstallAssistant[2252]: No available package ref for compatibility update. Ignoring.
Nov 22 10:41:56 --- last message repeated 2 times ---
Nov 22 10:41:56 Anonymous InstallAssistant[2252]: Retrieving 0 packages (0.000 GB)
Nov 22 10:41:56 Anonymous InstallAssistant[2252]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Nov 22 10:42:14 Anonymous InstallAssistant[2252]: Finished operation queue

How to see the object while moving on the artboard?

hello everyone;
maybe a silly question; how to see the object while moving on the artboard? i dont wanna see only the objects bounding box(outline of the object). i wanna see the object it self. thank you.

What have they gone and messed up now?
When I drag an object (with bounding boxes turned on), the object moves and the bounding box stays still until I stop dragging, upon which it snaps to the object’s new position.
If I don’t have bounding boxes turned on (as I usually work), the object moves when dragged.
If what Bedri says is right, they’ve gone and mended something that wasn’t busted.

Error: An error occurred while preparing the query in openquery on ServiceNow ODBC Link Server

Hi Team,
Greetings of the Day!!!!!
I have a created a link server on SQL Server 2008 R2 databse of Service Now ODBC driver. And written a stored procedure using openquery to get the data from link server.
Now problem is that, when i have scheduled that stored procedure in sql jobs. When this job runs automatically then we are getting below error while when i start the job mannually then it's not giving error.
An error occurred while preparing the query "..........."
Please help me to resolve this issue.
Regards,
Brijendra Pandey

Hi Fanny,
I had reviewed the job history. I am getting below message where as table is exist in the database.
Message
Executed as user: NT AUTHORITY\SYSTEM. OLE DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:incident not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE
DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:sysapproval_approver not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE DB provider "MSDASQL" for linked
server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:problem not found.[10129]". [SQLSTATE 01000] (Message 7412). The step succeeded.
Regards,
Brijendra Pandey

Getting error while preparing to send sharing message

I have seen many people post up about this same error, however I am going to share some details in the troubleshooting I have performed.
Environment: Exchange 2013. Cloud hosted. Internet connectivity using any number of clients. Mostly OWA, but a few Outlook 2010 and Outlook 2013.
1. User A with Outlook 2010 or Outlook 2013 right clicks on the calendar and clicks "Share" -> "Share Calendar". They look up User B in the Global Address List and click "Send." An error window pop-up states "Error while
preparing to send sharing message." User A is able to click on Calendar Permissions and add User B to the correct permissions. User A with OWA is able to right click on the calendar and click "Share Calendar" and it will send the message, no
errors.
2. User B with Outlook 2010 or Outlook 2013 on the same computer that User A was trying to do this from right clicks on the calendar and clicks "Share" -> "Share Calendar". They look up User A in the Global Address List and click "Send".
No errors and the message goes through fine. It works correctly with OWA as well.
I have seen people put up "autodiscover" and "permissions" or other things. This is obviously not a permission issue because the same thing that can be accomplished in OWA can't be accomplished in Outlook. It isn't an autodiscover issue
because the same thing that one person can accomplish on a computer/Outlook, another cannot. This is the same error that I have seen since the time of Outlook 2007 and have yet to see a valid solution.
Thanks,
Don

Hi Don,
Hope it is the solution:
You can't share your calendar in Outlook 2007
http://support.microsoft.com/kb/2836889
Thanks
Mavis
Mavis Huang
TechNet Community Support

I am unable to use services for objects while creating a PO

Hi All,
I am unable to use services for objects while creating a PO ie in me21n / Me22n .
Our client wants to attach some doucument along with the PO, we want to use services for object for this. I use this services for objects in admin level , but unable to use this at user level.
System gives the following message
No service available
Message no. SGOS_MSG002
Regards
Gsg

Hi,
Refer the following OSS notes 552127, 598073
For getting Object for services icon in ME21N and ME51N refer OSS note 913251

Runtime error 429, activeX component cant create object while using netbet pro on windows 7 & 8.1 HELP!!!

runtime error 429, activeX component cant create object while using netbet pro
does anyone know what I could do to fix this problem??? netbet pro was't available for a while then it's back but has yet to run

What's netbet pro?
I'd recommend asking questions about third party applications in the vendor's forum, not a Microsoft forum meant for admin scripting.
EDIT: Ah, some gambling website...
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

When starting the Migration Assistant on my pc, after a few seconds it says "An error occurred while preparating your information for transfer" what should i do ?

When starting the Migration Assistant on my pc, after a few seconds it says "An error occurred while preparating your information for transfer" what should i do ?

Restart both computers then try again.
Switch Basics: Migrate your Windows files to your Mac

Account 300000 requires an assignment to a CO object while I am trying to

Dear Experts,
Account 300000 requires an assignment to a CO object while I am trying to do posting from billing doc to acc doc .
When I am trying in KA01 to create cost element then sym will ask in default acc asst cost centre .After when I do trying create cost centre in KS01 sym giving error message u2018 Controlling area XXX does not have a standard hierarchy (please assign one)u2019
Again if I trying to create std hierarchy in (OKEON u2013 Change) getting message u2018
u2018You have not yet created a cost center standard hierarchy for COAr xxxx
So wt should I do for this error to clear.?
Regards
Ishikesh

Hi Ishikesh,
First of all are you using a make-to-order scenario or scenario where there is linkage to controlling?
This is an error because the G/L account which you have assigned in the customisation is requiring an assignment to any of the parameter which can relate it to the Controlling for e.g. Cost center or WBS element.
For this you have to have some guidance of Controlling customisation as this is not the directly an issue of SD module.
If the G/L is for Revenue then it will be a secondary cost element and not primary. If the G/L is a revenue element , then account needs a profit center. If a cost element , then account needs a cost center.
Please check first the field status of the account in Transaction: FS00.
If this account requires CO object as mandatory then check whether a cost element is created or not , this error normally occurs when CO object is mandatory but relevant cost element is not created.
You have a cost account defined in accounts determination (Transaction: OBYC), and every cost account must have a cost object associated (say, internal order, cost center, etc..).
You must decide what is the cost object to 'receive' the cost value on the account
Now, Look at Transaction: OKB9 - Display View "Account assignment" : Overview
In OKB9 specify weather this cost element give impact to cost center or profitability segment. If it is give impact to cost center then assign cost center against to cost element or assign it to PA.
OR, Alternatively -
Go to, Transaction: KA04 and delete the cost elements for your g/l accounts.
Regards,
Karthik.

Outlook 2010/Error sharing Calendar: Error while preparing to send sharing message

Everyone that is connected to this exchange is receiving an error when they attempt to share a calendar in outlook 2010. We are using Exchange 2010 and Outlook 2010. The error reads: Error while preparing to send sharing message.
Any ideas on a reason why this would be happening?

I think it may be caused by the following reasons.
1. Auto Discover service or outlook 2010 issue
To verify it ,you could try sharing calendar via OWA?
For how to manage Auto discover Service
http://technet.microsoft.com/en-au/library/aa995956.aspx
2.Mailbox corruption issue
For how to repair database
http://social.technet.microsoft.com/Forums/en-US/exchangesvrclients/thread/0ef36823-261f-40eb-a2e7-6dd0398d8d10/
3. Restrictive sharing permission assigned on the calendar.
Could you please verify if it is caused by your sharing policies? If the User chooses to change the permission
to the following: "Anyone can view and search for this Calendar on Office online.” You should be able to send
them without issues.

My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
Checking in the log revealed the following error:
Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?

A: my MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.

An error occurred while preparing the installation try running this application again mountain lion

I have Macbook Pro. Previous OS was Mountain Lion 10.8.5. It was running smoothly. When I have tried to clean install the NEW Maverick 10.9 it didnt work. I erase the drive then restart for boot. nad my usb boot disk was connected. When the window came for reinstall the OS. I click. click to "continue" but then it says....there has a problem with boot. But six months ago I installed it in the same way without any error or any hamper. after that i tried many times to boot and install but i failed. i tried to recover it by internet recovery. it takes few hours. after completation the recovery the reinstall window again came. i click to reinstall then it says "an error occurred while preparing the installation try running this application again mountain lion"

i tried several times but it doesn't work. now i am downloading again osx 10.8.5 dmg to try again.

Estimation of an Object while prepareing specs ?

Similar Messages

Maybe you are looking for