ESW-520-24-K9 and Cisco Network Assistant

HI,
Is this switch model ESW-520-24-K9 is supported by Cisco Network Assistant.
In the leatest release notes of CNA are supported Catalyst Express 520 Series Switches and this model WS-CE520-24TT-K9 is on the supported list.
But the mention model above is EoL and the new one is ESW-520-24-K9.
Thanks,
Kamil

Hi Dave,
Thanks for your replay.
Yes, you are right that this switch model is supported by CCA but not by Cisco Network Assistant.
These programs are different in functionality.
The situation has become clearer, since the customer bought the Cisco Catalyst 2960 series switch.
Kamil

Similar Messages

2960S-48FPD and Cisco network Assistant

Hi all,
I'm using Cisco network Assistant V5.5 and when I try to discover WS-C2960S-48FPD-L I have this message :
Unsuported device type ... cannot add device to commuity
Any have a solution to that problem ??
Thank's, Laurent

Hi Laurent,
This switch is not supported by Cisco Network Assistant yet.

WS-2960-48TC-L and Cisco Network Assistant

Hello all!
I have WS-2960-48TC-L in
#show ver
Switch Ports Model SW Version SW Image
* 1 50 WS-C2960+48TC-L 15.0(2)EZ C2960-LANBASEK9-M
In Cisco Network Assistant (ver. 5.8.(9.1)) I can not add a switch to the community? And Why in Model string we have + (plus) but not - (dash)
Sorrry for my bad English.

Hi Dave,
Thanks for your replay.
Yes, you are right that this switch model is supported by CCA but not by Cisco Network Assistant.
These programs are different in functionality.
The situation has become clearer, since the customer bought the Cisco Catalyst 2960 series switch.
Kamil

Cisco Network Assistant 5.5 and WS-X4013+10GE

I have installed CNA 5.5 and it works fine with most of the devices, including catalyst 4500 series with different supervisors (WS-X4013+, WS-X4013+TS, WS-X45 SUP6-E).
It can also detect supervisor WS-X4013+10GE, but CNA failed to show this device in Front Panel View. Is there anything I have to do to make the devices with Supervisor WS-X4013+10GE to be shown in Front Panel View?
WS-X4013+10GE are in either 4503 or 4506 chassis, running IOS version 12.2(31)SGA or 12.2(40)SG.
Please give some hints, thanks.
Rgds,
Sunny

I downloaded Cisco Network Assistant 5.5, everytime when I try to run
I get error message "Could not creat Java virtual Machine' any idea how
to solve this?
To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:
JVM_MAXIMUM_HEAP=1024m
Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m, and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.
Check out the below link for more information
http://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

Cisco Network Assistant, and Linksys Switches?

Hi all,
Given that Cisco owns Linksys, that CNA seems aimed at the small/medium business market, and that many of those businesses (like me) probably mix and match Linksys managed switches (like the SRW series) as leaf switches hanging off other higher end Cisco network gear, It seems to me that making CNA ccapable of discovering and managing those Linksys switches would make a lot of sense.
Is there any hope or plan for this in the future?
-Kyle

I would like to see this as well. I have nine Linksys SRW2024 units and it is a pain to go into each one seperately. I am used to the Cisco Network Assistant and it would greatly help if they could talk to LinkSys smart switches. Please!
-Milt Hull

Cisco Network Assistant and add to comunity problem via HTTPS

hello,
i have big network of cisco switches and all is in my cisco network assistant in comunity connected via HTTPS. if i add new switch to network (all for HTTPS access is configured good: domain name, ip http secure-server, authenticate locale ...) and if i can add this switch to comunity (right click on icon and ADD TO COMUNITY), CNA say "Unable to Connect", because it can connect to switch via HTTP (i have disable it on switch), not via HTTPS. i have never version of CNA ... where is problem? why it not connect to switch via HTTPS? hmmm? thank you ... Peter

"The HTTP server interface must be enabled to display the network assistant. " Source.
You can put an access-list on the http server if you are concerned about security exposure.

Cisco Network Assistant and IOS

Does Cisco Network Assistant require a certain Ciso IOS to work?

Hi,
My understanding is that CNA is limited to a certain set of platforms, as indicated here:
http://www.cisco.com/en/US/products/ps5931/products_data_sheet0900aecd8034fbf1.html
AS long as you have a supported device, I don't believe you need a special IOS version in order to use it.
Hope that helps - pls rate the post if it does.
Paresh

Cisco Network Assistant, unable to add a switch

I have a network running some 20 switches, two controllers and many AP's. All the devices that should be able to connect to cisco network assistant can successfully. However there is one switch that will show in neighbours but will give the message of “unable to connect to device” when I try and add it to the topology.
As far as I can see the config is identically to all other similar switches in the network. I can telnet from a switch (management VLAN) to the switch in question. However when I try to ping or telnet from the PC running network assistant (different subnet) I am unsuccessful. However I can ping/telnet to all other cisco device from this PC.
The switch is a WS-C3560-48TS and I have included the config for firstly the switch in question and another switch of the same model and config that works correctly. Any help would be greatly appreciated, thank you.
sho run
Building configuration...
Current configuration : 7363 bytes
version 12.2
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
hostname wc3_switch_1
enable secret 5 $1$Fn0U$2rG6DadA8JSUzQzSNmMc4/
enable password 7 1511021F0725
username dis privilege 15 secret 5 $1$b3d.$S43CM1xtXyEtO5Rsil6Bn1
username admin privilege 15 password 7 0811185C224C543341
no aaa new-model
ip subnet-zero
ip routing
no ip domain-lookup
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet0/1
description ### Connected to Parkside-AP05 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/2
description ### Connected to Parkside-AP06 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/3
description ### Connected to Parkside-AP07 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/4
description ### Connected to Parkside-AP08 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/5
description ### Connected to Parkside-AP12 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/6
description ### Connected to Parkside-AP13 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/7
description ### Connected to Parkside-AP20 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/8
description ### Connected to Parkside-AP21 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/9
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/10
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/11
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/12
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/13
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/14
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/15
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/16
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/17
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/18
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/19
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/20
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/21
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/22
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/23
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/24
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/25
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/26
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/27
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/28
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/29
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/30
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/31
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/32
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/33
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/34
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/35
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/36
description ### Connected to Parkside-AP36 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/37
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/38
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/39
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/40
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/41
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/42
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/43
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/44
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/45
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/46
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/47
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/48
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface GigabitEthernet0/1
description *** Connected to WC2A_Core_Switch ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/2
description *** Connected to wc3_switch_2 ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/3
shutdown
interface GigabitEthernet0/4
shutdown
interface Vlan1
ip address 10.0.0.31 255.255.255.0
ip default-gateway 10.0.0.254
ip classless
ip http server
control-plane
line con 0
password 7 144711185D07
logging synchronous
login local
line vty 0 4
password 7 144711185D07
logging synchronous
login local
line vty 5 15
password 7 094F471A1A0A
no login
end
wc3_switch_2#sho run
Building configuration...
Current configuration : 7239 bytes
version 12.2
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
hostname wc3_switch_2
enable secret 5 $1$Sfoj$a6AdO7PI0bP8ERhpWl3OP.
username dis privilege 15 secret 5 $1$D9c6$16yFzETOxBNHiPdTEqkxQ1
username admin privilege 15 password 7 133543002059550E78
no aaa new-model
ip subnet-zero
no ip domain-lookup
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet0/1
description ### Connected to Parkside-AP24 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/2
description ### Connected to Parkside-AP27 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/3
description ### Connected to Parkside-AP28 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/4
description ### Connected to Parkside-AP30 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/5
description ### Connected to Parkside-AP31 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/6
description ### Connected to Parkside-AP32 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/7
description ### Connected to Parkside-AP33 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/8
description *** Curric4 VLAN Port ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/9
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/10
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/11
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/12
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/13
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/14
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/15
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/16
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/17
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/18
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/19
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/20
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/21
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/22
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/23
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/24
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/25
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/26
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/27
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/28
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/29
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/30
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/31
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/32
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/33
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/34
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/35
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/36
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/37
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/38
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/39
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/40
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/41
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/42
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/43
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/44
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/45
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/46
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/47
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/48
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface GigabitEthernet0/1
description *** Connected to wc3_switch_1 ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/2
description *** Connected to wc3_switch_3 ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/3
shutdown
interface GigabitEthernet0/4
shutdown
interface Vlan1
ip address 10.0.0.32 255.255.255.0
ip default-gateway 10.0.0.254
ip classless
ip http server
control-plane
line con 0
password 7 135514015A0F
logging synchronous
login local
line vty 0 4
password 7 135514015A0F
logging synchronous
login local
line vty 5 15
no login
end

The switch configurations look pretty straightforward and mostly correct.
I notice that the problem switch has "ip routing" global command. Why is that necessary? You are only using it as a L2 switch, yes? If you use "ip routing" and have no routing process (ospf, eigrp, etc.) running you would need to add a static default route (ip route 0.0.0.0 etc.) and not use the "ip default-gateway" command. Otherwise the switch itself (the SVI) does not know how to leave the management VLAN routing-wise since it is the only L3 interface defined.
(I might also add "ip http authentication local" on each and I'd definitely disable telnet in favor of ssh)

Software Cisco Network Assistant for Switch SMB?

Is there any management software as the Cisco Network Assistant for smb switch as SLM224G or SRW224G4-K9-NA, or only works with models 2960 and higher?

The SX300 series switch will work with CCA. But it does not work with CNA.
-Tom
Please rate helpful posts

Can't create VLAN's with Cisco Network Assistant

Hello everyone
I have a problem with my newest Switch, a WS-C2960X-48TS-L
Normaly I can programm all my Switches with Cisco Network Assistant. But now I have a problem with creating VLAN's. I can create them, safe them but after a refresh, all the new VLAN's are gone!
I updated the CNA to the newest Build 6.0 and updated the Switch to 15.2(2)E, but nothing helps!
Over the CLI I can do everything, but this is not a option for me! To programm sometimes a switch CNA is perfect for me! If it works!!
Thanks
Tobi

yes I can programm the vlan's over CLI. That's works. I have not tested this if its really works, but the VLAN's are programmed.
hmm I checked the STP / VTP settings with a second identical Switch, but there are no differents. Made a backup of one Switch and restore on the other One, but I'm still not able to create VLAN's.
however, I contacted my vendor today, he tell me that it shouldt be a problem to take back the switch.
Best regards
Tobi

Wrong Port Statistics in Cisco Network Assistant

Hello,
I'm having some troubles with CNA (version 6.0). There's a few switches in the network that displays wrong information about sports activities/statistics. I've got some ports administratively down, without activity, however CNA is showing Tx and Rx rates, etc. I've already cleared counters from the application and from CLI too. If I do "show interface Gix/x/x" in the CLI, it returns results that I waited, but not in CNA, where it's showing wrong information. Moreover, some ports which should have activity and statistics, don't displays info. All rates and statistics shows 0 when I'd must see any number except 0.
I'm talking about a stack with 3 Catalyst 3750-X 48P.
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.0(2)SE5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 25-Oct-13 12:38 by prod_rel_team
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)
Thanks,
Kind regards,

In Cisco Network Assistant, under smart ports, if I configure the switch port as Cisco Wireless/Router, it hard codes the interface as Trunk.In this particular case what is the reason for hard coding it as trunk?
When you are dealing with autonomous wireless access point, it's very common to have mutiple VLANs configured in the WAP, therefore you need a Trunk switch port.
You can also configure the trunk port to allow VLANs of your choice.

Are the SG500P SMB switchs supported for Cisco Network Assistant?

Hi, we need to enroll some SG500-28P switches to a CNA? Is this possible? I suppose that CDP feature allow this. Actually, i have installed CNA Ver. 6.0. Thanks in advance.

Hello Fernando,
Thank you for visiting the Cisco Support Community!
Here is a list of all the devices supported by the Cisco Network Assistant for the 6.0 version and later. Many of the 500 series switches, including the SG500-28P Managed Switch, are supported by the CNA. This page will also give you any additional information you may need such as the features of the CNA 6.0 version, any system requirements, and more.
If this post was helpful, please remember to mark this question as resolved to help others in the community! If you have any further questions, please do not hesitate to ask!
Best,
LP

Cisco Network Assistant doesn't start correctly

Hi!
A bit of background:
We've been replacing our 'old' Catalyst 3550 boxes with 3750 Switches, and since the web-interface on these are 'a bit lacking' in functionality(to say the least), we figured that CNA(downloaded latest version) would be just the thing...
Except, when we try to start it, we get this message:
Read/write access problems:
Ingen tilgang
=======================================
Note: Read/write access is required for user home directory and installation directory:
C:\Documents and Settings\BOFH
C:\Programfiler\Cisco Systems\Cisco Network Assistant
=======================================
'Ingen adgang' is Norwegian for 'No access'.
Also, I've altered my profile name in the message(No need to give away login name, is there? :-)
Now, my PC is set up according to 'best practices' for a SECURE NETWORKED PC In an office environment.
In other words, my user doesn't have write access to any folder in the %Program Files% areas, and that's the way we like to keep it...
So, Who goofed up the software, and how do I get around it without compromising the security of my PC?

That is NOT a solution.
The reason why a user shouldn't have write access to the \program files\ folder is that it contains EXECUTABLE BINARIES, which many virii likes to infect.
Moving the install to another folder and giving a user write access to that just moves the problem to another place.
What COULD help is a list of subfolders(which doesn't contain binaries or other easily-infected files) or files which the program needs to have write access to, or an updated version which stores its config data somewhere else...

What's the username & password when i connect device from cisco network assistant

what's the username & password when i connect device from cisco network assistant?
http://i200.photobucket.com/albums/aa273/wallfire02/Capture_zpsa8f5fd2b.jpg

Although that may be true...
If I click the "Connect As..." button it asks for a username and password.
I've experienced connecting to other user's computers on a network. To gain access to their computer, I just use their username and password. I've done this before to transfer files without using a flash drive or burned disk.
I'm trying to find out what I'm supposed to log on as to gain access to this device...
My point is that yes, I'm connected to it by wifi. Otherwise it wouldn't show up; ha-ha!
Is my point really that hard to grasp?

Cisco Network Assistant (CNA) Error: Connect

Best regards community,
Please I need your help, I installed Cisco Network Assistant 5.8 (9.1) for manage some catalyst switches as 2950, 2960, 2960S, 2960X, 3750X. I can manage all devices except WS-C2960X-24TS-LL model, I have following message from CNA: "Error: Connect Index: 26, Size:26". This device have same configuration for level 15 access as other devices with user name and password. the catalyst switch IOS version is 15.0(2)EX4
This problem is about either software or hardware? How can solve?
Thanks in advance

You're welcome.
I know the product team monitor the Network Management Forum. If you post your question there, one of them may pick up on it.
The CNA support typically lags the new product release by about 4-6 months, sometimes longer depending on how well the hardware product release matches up with the network management product's latest release date. The 2960XR just started shipping in July 2013 so a good guess would be that CNA might support it in the next release (5.9?). That's just a guess though.

ESW-520-24-K9 and Cisco Network Assistant

Similar Messages

Maybe you are looking for