ESX 3.5u3 doesn't see network after firmware update on x6250

Hello,
We have got several Sun blade x6250 with ESX 3.5u3 with latest updates.
We have updated firmware on one of them from ELOM 4.0.45 -> ILOM 3.0.3.33 recently.
Now a ESX server doesn't see network:
Node ISOLATED form Network. Either repair network or override agent startup ...
I executed embedded PC-Check test, it saw all four NICs and said that they were 'Success'.
Also, I cleared statistic on a Cisco Catalist interfaces where the blade was connected.
After a day 'Receive' statistic is 0
Also, I tried to load the blade with DSL Linux, it didn't see network too.
Do you have any idea concerning the situation?
Thanks!
Regards,
Andrey.

Similar Messages

ITunes doesn't see iPhone4 after recent update of iTunes

I recently updated iTunes. The update went smoothly, but immediately after the update iTunes no longer shows my iPhone4. The diagnostics show that everything is okay with exception of the no iPhone connected error. I've run through all of the Apple helps but nothing has fixed the problem. The same problem occurs on other user profiles on the same computer. The computer is a 64-bit Windows 7 machine. Windows 7 shows the iPhone and I can access it as a camera or drive. I've re-installed the phone USB driver but still no go. I can plug my phone into another computer and the sync works fine. Anyone else work through the same problem?

Try uninstalling iTunes and all of its components as described in this guide: http://support.apple.com/kb/HT1923, then reinstall the latest version of 64-bit iTunes. You must follow this guide exactly (uninstalling all components in the order specified) or it will not be successful. Also, unistalling iTunes only removes the application; you iTunes library and data will not be touched.

Airport Express doesn't connect to wireless network after firmware update

Hi,
I just updated the firmware on my Airport Express to 6.3 and now it will no longer join the network. I have tried reseting to the factory defaults and Airport Utility accepts all the information and shows the unit with a green dot next too it. However, the unit is still flashing amber and in the final step where the Utility tries to save the configuration the update fails and I get the following error message:
An error occurred while reading the configuration.
Please make sure your AirPort base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753).
I am using an old style AirPort Extreme as a base station.
Can anyone help?

Wow, really no suggestions yet? This is a first for me, on the Apple Discussion boards!
Can anyone help?

LaserJet 1102W lost connection to network after firmware update and can't reconnect.

I have used the LaserJet 1102W on my Wifii network for some time. I use MacOSX 10.7 on one laptop and OSX 10.8 on my new Retina Macbook Pro. I updated the firmware to get access to ePrint and lost wirless connections. I have tried many times to reestablish network connection as instructed thru System Preferences and continue to get the response that my Wep Key is invalid. I have many items using the Wep key including apple tv, phone, ipad and it is the correct wep key. My network is Wep 128. Is there some way I'm suppose to split the key between the 4 available wep key spaces? My router is a Linksys WRT320N, Mac Book Air running 10.7.4, Mac Book Pro running 10.8.2. I have been trying to setup the network wireless with the Mac Book Air. I can print with both computers via USB.

I updated a P1102w that we have here to firmware version 20120814 and haven't had any problems with it. I set a static IP and set the DNS to a preferred of 8.8.8.8 and an alternate of 8.8.4.4, and haven't had a problem with anything from a Windows system. I ran into a problem printing from Safari on a Mac running OS 10.8, but that was the only program with the problem. I even turned the printer off and back on several times to make sure the IP settings would stick, and they have. If you've done that and are still having problems, try power cycling your entire network. I'll link a document that will help to get the printer on the network steadily below. If you are still in warranty, HP may replace the printer at no cost to you. I'll link the information to get in touch with them below. The link will take you to a form to fill out. Once you fill it out and it is processed, it will give you the printers warranty information, a case number, and the phone number to call.
Printer Does Not Maintain Wireless Connection:
http://goo.gl/YoJ7g
HP Technical Support Case Call Form:
http://goo.gl/w7Hgh
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Flash CC doesn't start up after last update

Flash CC doesn't start up after last update. It said "Training en zelfstudie" (Training and self-stufy in Dutch) for the update.
Everything was working fine before the update, now if I try to start-up Flash solo,
it says: "Flash werkt niet meer" (Flash has stopped working), and quits.
As you can probably tell from the message, I'm on Windows 7.
Now here is interesting info: if I double click a previous movie, then Flash starts up fine and loads the previous movie.
However when I close it and the screen that should appear is the "new movie" dialog, flash hangs again.
So obviously something went wrong installing the new update, or the update doesn't work properly.
I'm now working with my pre-cc flash5.5 version, which I re-installed to avoid crashing flash every time I close a file.
My questions:
1- Where do I log this problem? (Or am I in the right place?)
2- Can I re-install the previous version, which worked fine? (I can live without tutorials etc.)
3- Can I try to re-install this version if the above is not possible and how do I go about doing that?

What fixed the problem for me was just reinstalling Flash CC. I thought I'd give it a try, because I couldn't find a message of anyone experiencing the same problem.
So I used the control panel to uninstall Flash, then I tried reinstalling.
Creative Cloud kept saying Flash is up to date, so you can't reinstall. If you click on the gear and choose Exit and then restart Creative Cloud it will take a few seconds, but the it will see the situation as it is and you can reinstall Flash.
After the reinstall the issue was gone.
Thanks for the other solutions, I think this is a handy resource for rolling back Flash if I ever do need it
and gives me more confidence in the creative cloud product.
Maybe Adobe will pick it up and make it easier for us 'normal' creative-cloud users to
pick which version we want. Like you can do in CVS systems.

Can't connect to wifi network after iOS update

Can't connect to wifi network after iOS update.

This does not work in my case.
Situation: we have wifi at home using WPA encryption.
The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
Now things stopped working again. Resetting network settings did not help either.
The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again.

Lost network after kernel update

Hi
I have lost my network after kernel updating the kernel [2.6.35.7]
I downgraded to kernel 2.6.35.6
Serge

krychle wrote:
Hi,
I'm just reporting that I had this issue today too. I rebooted my computer from Win7 to Arch64 and I was left without network. Also it doesn't work in windows after rebooting back. I thought that It is something with connection so I tried to recoonect cable and also tryied to swap it in switch/adsl gateway. It started working after several switches (not on 1st!) It looks like interface is repeating on and off. So I rebooted to Arch and it stops working again...
I fixed it by reinstalling kernel26 package. But it is strange because it works yesterday, last thing what I did with kernel and modules was update of gc nvidia drivers... I don't know when I updated kernel last time
I'm using same network driver as Karol - r8169
lsmod | less
mii 3826 1 r8169
I'm using this card as well. I upgraded yesterday and I can't get wireless with WICD. Windows and normal network daemon work fine. I use kernel26. What other info can I provide? If a bug report needs to be filed, would it be WICD, kernel26 or other?
Also, I forgot, but I'm not using normal Wicd, I'm using wicd-nogtk from AUR. Krychle, are you using this also?
Edit: I think this has to do with the python update. I updated wicd-nogtk and its good now. I am online.
Last edited by Anonymo (2010-10-19 18:10:23)

I am from india...my ipad2 is not able to activate cellular data network after i updated it to ios5

i am from india...my ipad2 is not able to activate cellular data network after i updated it to ios5

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

Airport doesn't see networks

hello,
I am working on an iBook G3 running OSX10.3.9 and recently (september) added an airport card to my computer. everything was working fine until mid-january when airport stopped seeing networks - that is, it is turned on and set to see networks automatically, however, even when I am in places where there is a network (and where I have connected in the past), I am getting no bars (all of the bars for the airport icon are grey). I had my airport card tested and was assured that it is working fine - it was suggested to me that this might be a result of the software being compromised? I have just finished re-downloading and installing OSX10.3.9 but with no success - with respect to airport, everything is the same (all grey bars, no networks listed). I am very frustrated and need to be able to connect wirelessly again - please help!
iBook (G3) Mac OS X (10.3.9)

I'm hardly an expert, but I think I might have solved a somewhat similar problem.
Network Preference's Default setting stopped working. Each time I turned on my iBook I would have grey menu bars and have to go to InternetConnect in Applications to select a network, although I only had one, and my TCP/IP settings had not changed (Have you checked yours?).
Pulling plugs, zapping the PRAM, etc. did not work. What finally did, was going to HD/Library/Preferences/SystemConfiguration/com.apple.airportpreferences.plist and trashing that one .plist file.
After restarting, I got right on. Don't know if this will work for any of you, but it is easy to try, and I don't think can do any harm.
G3 Mac OS X (10.3.9)

ESX 3.5u3 doesn't see network after firmware update on x6250

Similar Messages

Maybe you are looking for