ESYU: Canceled 상태의 WIP Work order나 Discrete job을 purge 할 수 있는 방법

Purpose
Oracle Work in Process - Version: 11.5.2 to 11.5.10
WIP 사용자 중 Canceled status의 Discrete Jobs이나 WIP Work Orders를 purge
하길 원하는 user가 있다.
하지만 standard form은 closed discrete jobs만을 purge 할 수 있다.
WIP user manual에 따르면 현재 closed 된 accounting period 안에서 closed 된
discrete jobs에 대한 정보만을 purge 할 수 있다고 되어 있다.
다음은 이에 대한 work around 이다.
Solution
Work Around:
1. WIP: Discrete> Close Discrete Jobs> Close Discrete Jobs(Form)으로 이동한다.
2. Find Discrete Jobs parameter에 아래와 같이 입력한다.
From Job = Close를 원하는 Job
To Job = Close를 원하는 Job
Status = Canceled
3. Tools menu에서 Close 1을 선택한다.
Close 1을 선택하면 canceled Discrete Job이 closed 가 된다.
이 때 job number를 기억하고 note 해 둔다.
4. GL과 Inventory Accounting periods가 close가 될 때, canceled discrete jobs
(현재는 closed 상태)를 Purge Job form을 이용하여 purge 할 수 있다.
WIP: Discrete> Purge Discrete Jobs> Purge Discrete Josb from or SRS
Reference
Note 429489.1

Similar Messages

  • How to prevent an error of [WIP work order ... is locked-]

    Hello experts
    Can someone tell me how to prevent an error which [The WIP work order associated with this transaction is currently locked and being updated by another user.  Please wait for a few seconds and try again.Transaction processor error].
    How can you prevent that error?
    P.S.
    Oracle support　told me [When you make data of mtl_transaction_interface, give same transaction_header_id to all data. Then, you kick worker with appointed transaction_header_id. Or, you set up being uncompatible with workers].
    I cannot allow that making with same transaction_header_id and being uncompatible with worker on my system.

    Hi santosh,
    You can implement badi BBP_DOC_CHECK to check vendor email and issue error message.
    Kind regards,
    Yann

  • WIP Work Order Report pulling wrong customer

    In the Customer Name field on the WIP Work Order Report it pulls in the Bill To customer instead of the Ship To customer.  Please advise in this regard.
    Thanks in Advance.

    Hi,
    Can you please make Ship To also as Primary Business Purpose?
    Regards
    Raghavender K

  • WIP MASS LOAD를 이용한 DISCRETE JOB생성 방법

    제품 : MFG_WIP
    작성날짜 : 2004-05-21
    WIP MASS LOAD를 이용한 DISCRETE JOB생성 방법
    ====================================
    PURPOSE
    WIP Mass Load를 이용한 Discrete Job생성 방법을
    기술하고자 한다.
    Explanation
    (1) Interface Table 정보
    WIP_JOB_SCHEDULE_INTERFACE (Header level)
    WIP_JOB_DTLS_INTERFACE (Line Level)
    WIP_INTERFACE_ERRORS (WIP Mass Load의 Error발생시 참조)
    (2) 방법
    step1> 위에 언급한 Table에 정보를 Insert한다.
    step2> WIP Mass Load Program을 수행한다.
    WIP Mass Load 를 실행하면 , Interface table로부터 WIP Job을
    생성하게 된다.
    만약, 기존의 WIP Job에 대해 Detail한 사항을 수정하고자 할 경우,
    wip_job_schdeule_interface와 wip_job_dtls_interface를 모두
    작성해주어야 한다.
    이 때, wip_job_shedule_interface와 wip_job_dtls_interface는
    group_id, header_id가 동일하여야 한다.
    Example
    Reference Documents
    BUG1485375 , 1654237, 1663551

  • Material shortage for Planned Order (Discrete Job) in PWB

    Client has planned orders on planner workbench (PWB) ready to release as Discrete Jobs but, because they have frequent revisions, they waits till all components (required to build job) are onhand before releasing from PWB.
    They would like an easy way to either check or be notified when the last component required for job is received into inventory so they can release from PWB. They cannot use the standard "Discrete Job Shortage Report" as the job is not created yet. And they don't want to release from PWB till ALL material is onhand
    Could we create a custom report perhaps (using same logic as "WIP Mass Load" to determine all component required versus onhand), but does anyone have a better solution how we can solve this?
    Regards,
    Hugh
    Edited by: user13050057 on 13-May-2010 02:09
    Edited by: Hugh Parker on 13-May-2010 08:13

    1) Why would you check for components of subassemblies? e.g. Say your BOM looks like this.
    FG1 is made up of SA1 and SA2 and COMP1.
    SA1 is made up of COMP2 and COMP3.
    Say you are releasing planned order for FG1. As long as the planned order is pegged to onhand for SA1, SA2 and COMP1, you are good. Right?
    2) If you have to add custom logic, I would do it using a when-validate-record personalization on the PWB. The personalization will call a function that accepts order number ; does all pegging checks and returns true or false. If it returns false, then the personalization returns error and does not allow release of the planned order. The function will have to be an interative program that traverses the pegging loop to ensure that all lowest level demands are pegged to onhand.
    Hope this helps
    Sandeep Gandhi

  • WIP : Work Order Aging report

    Hello,
    Is there any standard program given by Oracle on WIP  as 'Work Order Aging report' ?
    I guess not.
    If its not, then is there any other program related to WIP Aging exists in Oracle?
    Thanks in advance.

    Hi,
    Can you please make Ship To also as Primary Business Purpose?
    Regards
    Raghavender K

  • Wip work order conversion

    CAN ANY ONE SEND ME THE documentation for work order conversion.
    including the interface tables, base tables , concurrent program and validation columns .
    Ineed a clear idea of what is happening. i gone throughed the documents in metalink and open interface documents but i cank get the clear idea how the two interface table is processed to create a work order. please help me
    Message was edited by:
    user595942

    Hi,
    Can you please make Ship To also as Primary Business Purpose?
    Regards
    Raghavender K

  • Work Order Less Completion Form-Help

    Hello Guys i have a question on WIP- Work Order Less Completion Form.
    In the form when we enter the assemebly item and go to Components-->Lot/Serial, In Lot entry form there is a field called Lot number which has LOV and also allows user to enter his own Value what he needs.
    My question is is there any controls in Oracle where we can prevent user from entering his value in the LOt number field,instead he has to select it from LOV only.
    Please help me on this.
    Thanks

    Hi,
    Please see if these documents help.
    Note: 112055.1 - Lot/Serial Control Setups
    Note: 338189.1 - When Receiving an RMA, Lot Number LOV Shows All Lots
    Regards,
    Hussein

  • QUERY TO LINK DISCRETE JOB AND SALES ORDER

    Hi Experts,
    I am working in Work In Process module.
    I need a query to find the Sales Orders for particular Discrete job
    I am in the urgent situation, kindly help me.
    Thanks in advance.

    Hi;
    Please check below thread which could be helpful for your issue:
    http://forums.oracle.com/forums/thread.jspa?messageID=9155702
    Regard
    Helios

  • How to delink sales order from a discrete job.

    Hi,
    I wanted to know how we can delink sales order from a discrete job.
    Thanks

    Go to the reservations screen in inventory; find the reservation using item number or sales order #
    Delete the reservation.
    Alternatively, you can go to the wip job and click on reservations and delete it.
    Hope this helps,
    Sandeep Gandhi

  • Serial control in wip discrete jobs

    Hi gurus,
    i had created a discrete job with serial control enabled for components.
    but when trying to query for job im unable to get it.
    so whats the mistake i did?
    when going thru oracle white papers they mentioned to change profile option
    TP:WIP Operation backflush setup to online processing mode.(for having serial control in job)
    but i cant able to get the profile option in wip responsibilty.
    will u pls guide what are mandatory steps for building discrete jobs with serial control and to perfor move transactions?
    waiting for solution pls.

    Dear Mr.Riccardo
    I would like to bring to your notice a document from Metalink. It says that we cannot do move transaction of Serial controlled Items in Desktop forms.....
    Subject: Is Serial Number Association Functionality Only Available Using Supply Chain Mobile Applications?
    Doc ID: Note:265512.1 Type: HOWTO
    Last Revision Date: 01-APR-2004 Status: PUBLISHED
    The information in this article applies to:
    Oracle Work in Process - Version: 11.5.9
    This problem can occur on any platform.
    Goal
    Is the new functionality of Serial Number Association only available through Mobile Applications?
    Fix
    This functionality provides support for standard discrete jobs with or without a routing.
    The User Interface for this functionality is via Mobile Applications
    Serialization can be activated within a job...this can be for entire job or beginning at
    a specified operation.This new feature is optional. It is defaulted by org parameter and controlled at the job level. The user will need to define the default to steps for the moves.
    When turned on, then when Jobs are created automatically ...via CTO or Planning, the serial will be turned on.
    The current functionality of serial number generation and uniqueness is used. Auto-generation and association at the time of job creation via Mass Load is added with this functionality. Also import of serials from 3rd party systems is supported.
    The serial association can occur anytime during or after job creation. Users can use pre-generated or on-the-fly serial numbers. This association is also not tied to job quantity and is changeable until assigned to a specific unit.
    Once the job is 'Serialized', you cannot transact this job through any of the Desktop forms. A new Menu structure is added in the Mobile Applications called 'Serialized Assembly and Material Transaction'.
    Users utilize the mobile pages under this menu to perform serialized move or completiontransactions.
    These assembly items for which the serial numbers are associated at the time of creating the wip job itself can be transacted only through Mobile Supply Chain Applications (MSCA) .

  • Cancelling WIP Job after completing the job

    Hello Everybody,
    There is an issue as to 'Cancelling WIP Job after completing the job'
    Please let me know how to resolve this or the workarounds.
    Provide me the navigation please.
    Thanks

    Hi abdul;
    Please check this and also Note:WIP Purge FAQ [ID 605621.1]
    Hope it helps
    Regard
    Helios

  • How to create a discrete job on condition that build-in-wip attribute is No.

    two or three times a year, jobs are created in the Discrete Job  form although build in wip attribute is No. (never created from MRP)
    i have no idea how the job could be created... i tried several times at same condition, but i couldn't.
    does anyone experience like this??

    Welcome to the forum.
    Oracle 9i is a database version from the previous century.
    But:
    You can read about DBMS_JOB in the 9i documentation here:
    http://www.oracle.com/pls/db92/homepage
    Or do some searches on http://asktom.oracle.com
    Anyway: if you want the job to run once, then omit the interval...
    Oh, and don't forget to read {message:id=9360002} from the SQL and Pl/SQL FAQ here:
    SQL and PL/SQL FAQ
    Edited by: Hoek on May 23, 2013 8:09 PM

  • Serialization Control in WIP Discrete JOB

    Hi everybody,
    I want perform a Discrete job which consists of 7 operations.10, 30, 50 and 70 are with Count Point & Auto Charge options and the 20, 40, 60 operations are without Count Point and without Auto Charge. In the 30th operation the Serial Numbers will be generated for the Final assembly.
    In routings i have specified the operating sequnce number i.e 30 in routing details window.
    If we specify any Item as under Serial Control (Predefined) in Inventory then Serial Numbers button will be enabled in the WIP Discrete JOBS window. There we can assign the Serial Numbers to the JOB quantity.
    But I am not able to perform neither Move Transactions nor Material Transactions in WIP even though my job is in Released status.My JOB name is not available in Move Transactions window.
    Please help me to solve this problem.
    regards,
    VAS

    hai,
    user guide says you can perform serialized move trans through oracle mobile supply chain applications using a mobile device,for further details you can refer metalink Is Serial Number Association Functionality Only Available Using Supply Chain Mobile Applications? doc:-note:265512.1,if you want to track serial numbers thro desktop appl then you will have have start serial tracking from the first operation itself but in your case it doesn't happen like that so i think you will have to use mobile device,once the serialization start operation number appears when you release a discrete job ,you cannot transct thro desktop appl,hope you are clear,post your feedback

  • Order for job work

    Sap Guru
    I want to know is there any report to display order where customer has given that order for job work.

    I dont know whether you are using a separate sale document type for Job Work orders. We do so and hence it is possible to generate a report. Another differentiating factor will be requirements type or item category in Job Work orders. Again you need to check whether system is configured that way. If so, then you can goto SE16 and give VBAP to check the job work orders.
    Regards,
    GSL.

Maybe you are looking for