Eta on Windows x64 support?

I'm not going to flame and rant. I just want know when this will happen. Kinda hard to integrate my iphone when i cant synch it.

No one knows until Apple announces it. Speculation is strictly prohibited by the TOU of these forums.

Similar Messages

No PKCS#11 support in JDK 6 Update 14 for Windows x64?

Hi there,
I successfully installed GlassFish 2.1 on Windows 2008 x64 with JDK 6 Update 13 for x64. Everything was ok until I wanted to access my USB token with a certificate on it trough an EJB.
I then had to reinstall everything based on 32-bit versions. Now it works again, but I'm not very satisfied with the solution because I wanted to have everything based 64-bit.
Why JDK 6 Update 14 for Windows x64 does not contain PKCS#11 support? When you have look to the x86 version support is available there.

If you load successfully your pkcs11 lib into java 32bit mean that the lib is 32bit.
You cannot load a 32bit native lib into java 64bit ( http://java.sun.com/docs/hotspot/HotSpotFAQ.html#64bit_native_porting ).
If you find the 64bit lib for your token, you should be able to use java64.

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

Windows 7 support dropped for Mac Pro 2013

I have sent feedback to Apple already as I understand from the support page Windows 7 x64 support has been dropped for the new Mac Pro.
Bearing in mind the corporate workstation market has largely shunned Windows 8/8.1 I find the dropping of support inexplicable and plain daft to enable the Mac Pro to take market share from the windows hardware domain.
My clients have purchased two Mac Pro's on launch day on the prerequisite that they can run Windows 7 with the possibility of more orders after the new year once testing is complete. Unless it can be made to work using EFI boot which as I suspect is the reason support and can easily be worked around you lose in my case 2 orders with the possibility if 10/20 more after. No workaround will mean cancelled orders.
Hopefully if enough of us air our disappointment Apple will reconsider because they will lose a sizeable chunk of sales because of this near sighted policy.

If what you say is true, then it would be a question of hardware support capabilities in Win 7, not a near-sighted policy. In any event, these are user forums. You aren't speaking to Apple, so I suggest you speak to Apple. Don't complain here. It's inappropriate and violates the Terms of Use.

Oracle Express Database - Windows x64

At the risk of being seriously repetitive, I'll post a question I have seen in various forms for approximately 3.5 years. The user community needs to have a specific, fact-based answer to the problem of no x64 support on Windows. In several threads one can find via Google, people purporting to be Oracle representatives claim a supported version will be available "soon". Soon in my neck of the woods generally means a time frame less than 3 years, but what do I know. Can someone please, please provide a definitive statement of direction on this issue, and assuming this is coming "soon", it would be overwhelmingly wonderful to have a specific date. My company plans/desires/hopes to release software that would embed an Oracle Express db, and frankly I'm about to throw in the towel if I can't get some visibility to this question. As I've heard from many ex customers, "there's always Sql Server".
Regards, Roger Carter, President, DBConnect Solutions, Inc.

Thanks for the update. I followed up with Oracle internally via our Oracle Partnership channel, and they checked with the VP of development responsible for XE. The official response is "there is no date where this will be provided for Windows x64. It is, however, under consideration." In my 25+ years of working with Oracle, I will give you my translation - it is not going to happen anytime soon, and to your point, it will probably be version 12 before you see anything. For us, this is a huge disappointment, and it means we will be abandoning many thing with Oracle. It's my view that they don't care about this vertical one bit.

11g R2 - 2 node RAC on Windows X64 2003 Server

hi
we are soon going to start building a 2 node 11g R2 RAC on Windows X64 2003 server
questions
1. In 11g R2, is creating 2 disk group DATA and FRA still considered the best practice?
2. On which disk group should we place the OCR and Voting Disk
3. If there are issues placing OCR and Voting Disk on ASM (there definitely appears to be some concerns / reported issues on this), is using OCFS2 still a viable option?
4. Can someone point us to a document such as step by step installation of 11g R2 RAC on Windows with ASM or best practices 11g R2 RAC on Windows?
thanks

A bit late maybe, but you can check Note 811271.1 - RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows).
Edited by: olmartins on Jun 2, 2010 11:53 AM

Hyperion Planning on Oracle DB 11.1.0.6.0(Microsoft Windows (x64))

1. Is Hyperion Planning 11.1.1.3 certified to work on Oracle DB 11.1.0.6.0 (Microsoft Windows (x64)) ?
2. Is Oracle Database 11.1.0.6.0(Microsoft Windows (x64) certified to work on Windows 7 Pro 64bit ?

You also do realize Hyperion Planning/Essbase/... is not supported on Windows 7 Pro. If you wish to install on a supported operating system install on Windows 2003 Server x64.
Yes, 11.1.0.6 is supported as a database for Hyperion 11.1.1.3 - review the certification matrices for Hyperion at: http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
No, Windows 7 is not a supported platform for 11.1.0.6 databas - review http://download.oracle.com/docs/cd/B28359_01/install.111/b32305.pdf
You can also located supported platforms with say 5 minute software with say 10 minutes of using google. If you do not have this much time to put towards the installation then you should not be installing as you should review all installation documentation before proceeding as it is at least a full day activity to do it properly (even after you have done it 20-30 times).
Regards,
John A. Booth
http://www.metavero.com

Vista x64 support; Core duo usage; SLI or Crossfire

With all the new hardware and OS advantages out there, it would be nice to speed more time doing than waiting . . .
1. Vista x64 support!
2.duo or quad processor: Lightroom could benefit from multi-threaded or distributed processing for speed or computational intensive tasks?
3. display: SLI or Crossfire support?

Lightroom version: 1.3.1 [403270]
Operating system: Microsoft Windows XP Professional x64 Edition Service Pack 2 (Build 3790)
Version: 5.2 [3790]
Application architecture: x86
System architecture: x64
Physical processor count: 4
Built-in memory: 4094.1 MB
Processor speed: 2.8 Ghz
Real memory available to Lightroom: 1228.8 MB
see?
lightroom is x86 application! it means, that it can use only 2 gigs of my ram, and that is a very big problem.
system:
xp x64
intel core 2 quad q6600
4gb ddr2

Windows 7 support UEFI

When looking at what Macs got *+official support Windows 7+*
Pivots on EFI (no support) or UEFI 2.x (supported)
http://support.apple.com/kb/HT3920
Same was true with with Vista 64-bit.
http://support.apple.com/kb/HT1846
Apple adopted Intel's EFI in 2006 (the Macs that don't get official Windows 7 support) and UEFI in early 2008.
A better boot manager and other changes I'm sure, not just a new set of drivers though, even those are also critically needed.
What UEFI Can Do For You :
has sections on industry support; storage partitioning with GPT, even Apple Boot Camp.
http://maximumpcguides.com/windows-vista/convert-a-mbr-disk-to-a-gpt-disk/
http://www.techotopia.com/index.php/AddingNew_GPT_and_MBR_Disks_to_Windows_Server_2008Systems
Technical Note TN2166: Secrets of the GPT
http://developer.apple.com/mac/library/technotes/tn2006/tn2166.html
http://www.tomshardware.com/reviews/intel-uefi-firmware,2486-7.html
UEFI 2.3 supports 64-bit kernel mode; Windows 7 64-bit; and supports boot volumes greater than 2TB, addressing more memory (Mac side as well).
http://www.pcmag.com/encyclopedia_term/0,2542,t=EFI&i=58377,00.asp
http://en.wikipedia.org/wiki/UEFI
http://www.uefi.org/about/
Microsoft firmware system guide:
http://www.microsoft.com/whdc/system/platform/firmware/uefiguide.mspx
http://www.microsoft.com/whdc/system/platform/firmware/default.mspx

I hope I'm not misinterpreting you, but you're actualy saying this update could be more like a UEFI-update?
That is exactly what I was hoping for. Dump this whole "protective MBR"-****, and go fully UEFI

HP LaserJet and Color LaserJet - Windows 7 support

To help customers successfully use their products with Windows 7, HP has identified recommended drivers per product. Please visit the following support documents for more information:
HP LaserJet and Color LaserJet - Windows 7 support
Deskjet, Officejet, or Photosmart
If you are having an issue with a windows 7 software install or driver, please start a new thread for greater visability.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Not to be confused with the title of this thread, because this tool will not work with installing most LaserJets, but try the HP Printer Install Wizard and let me know any error messages you get.
I will need to know quite a bit of information before I can be of much assistance, otherwise:
1. What error messages are you getting (ex. fatal error 1603)?
2. How are you trying to connect the printer (USB, wireless, etc)?
3. What happened when you used the HP Print and Scan Dr?
Lastly, If you do not answer these questions and others I know I will have, then I wish you the best of luck with your printer installation. Do not be mislead, just because I do not work for HP doesn't mean I'm not an expert.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Where can I find Windows 7 support files for Mac?

While in the process of creating a partition with Boot Camp, I was unable to download the Windows 7 support files. Is there a link to someplace I can get them elsewhere? Will Windows 7 work in Boot Camp without them? Thanks!
Daniell

Oh, okay. I was hoping they were available somewhere online since I'm having such difficulty downloading them through the Boot Camp Assistant. Thanks anyway.
Daniell

How to install apex on windows x64 with 10gR2?

Hello,
today I tried to install the http-server for our 10gR2-database. We are using windows x64.
But I cant find OHS for this release. How can I install apex then?
Regards,
Mark

have you tried the installation, or did you just ask in advance?
in the last wekks i did a lof of installation stuff on an x64 system using the old x32 versions. even oracle sw like 10.2.0.3 client etc.
and most oft the stuff was up and running just like on an x32 system.
just keep in mind that the directory structure an x64 is slightly different #
if u install x32 software the default installation path is "C:\Program Files (x86)" and in the registry a speacial key hklm\software\wow6432node
just in case you need to patch.
in my opinion it would be worth to give i a try, but remember not on a productive system.
i'd like to hear about your results
regards peter
Edited by: yeti on Jul 3, 2009 2:41 PM

Load balancing 10g forms - Connection from new browser window not supported

Load balancing 10g forms - Connection from new browser window not supported
We're experimenting with using webcache to load balance between multiple applications servers running OC4J forms processes.
We currently have one machine with infrastructure and mid-tier (BI & Forms) installed, which is being used for the webcache functionality, this is load balancing between 2 other servers each of which just have the mid-tier (BI & Forms) installation
In order to get this to work, I had to follow the instructions in the Forms deployment guide : http://download-uk.oracle.com/docs/cd/B14099_11/web.1012/b14032/tuning.htm#sthref707
The main gist of this is that you need to set the following in the orion-web.xml file in order that the sessions are maintained:
<session-tracking
cookies="enabled">
</session-tracking>
This all works fine in most cases.
The problem I am having is if I do one of the following on the client machine:
1) From IE6 / IE7 run a copy of a forms application. Then open a new window using the "New Window" menu option, and attempt to run another forms application.
2) In IE7 or Firefox 2.0 open a copy of the forms application, and then open a new tab and try and open another forms application.
If I try either of these I get a FRM-92101 error, and the following is displayed in the java console:
oracle.forms.net.ConnectionException: Connection from new browser window not supported
From trawling various forums (including metalink and otn) it looks like a problem with the way coockies are handled.
Unfortunately the usual workaround is to ensure that the session tracking option in the orion-web.xml file is disabled.
The problem is that I need this enabled in order for the load balancing to work.
Does anyone know of any other workarounds or patches that might help resolve this?
We're using Application server 10.1.2.0.2 running on windows 2003 servers.

You were right. Carriage returns were stopping it from working (the document is laid out over separate lines, so I assumed it would make no difference...).
I've now managed to get it so the forms at least run, but they are all being run in the forms OC4J instance on the same machine as the OHS.
Has anyone actually managed to get this to work, or am I doing something wrong?
I did wonder if using an OHS instance on a machine with no forms installation would make any difference?
I had raised a support call via metalink on this subject, but they eventually came to the conclusion that the only way to do this is with a hardware load balancer (Despite several documents suggesting that webcache is the way to go (including the forms deployment manual)).
I'm at the point now of giving up and writing some custom scripts to do the job instead...

J2SE 1.4.2 for Windows x64 bit download link

Dear All,
Can any one give me the link to download J2SE 1.4.2 for Windows x64 bit architecture?
Your help is highly appreciated.
Regards,
Syed

There should be no issues with using SAP JVM from the start.
Probably no notes because is straightforward:
- Extract the SAP JVM (e.g. c:\sapjvm_4)
- Set JAVA_HOME (c:\sapjvm_4)
And start installation as per guide.
We have done this recently with Solman 7 EHP1 and NW 7 EHP1 (J2EE stack).
We did have issue on central instance install where the J2EE instance would not start part way through installation (server0 continually crashed and restarted with memory issues) so we had to adjust the instance settings as per SAP Note#1603093, before retrying in SAPINST and continuing.
We had this problem with both Solman & NW 7 EHP1.

MacBook Pro won't download the Windows 7 support software

My mid 2010 13" MacBook pro cannot download the windows 7 support software from bootcamp. Bootcamp claims that it is not connected to the internet, however, it is. I have tried connecting to the internet via ethernet also, but no success. Is there a fix to this problem or maybe an external link?

Boot Camp 4.0 FAQ

Eta on Windows x64 support?

Similar Messages

Maybe you are looking for