/etc/postfix/virtual_users.db is older than source file...

/etc/postfix/virtual_users.db is older than source file /etc/postfix/virtual_users
is the error I am getting. My server is working great, but my mailing lists are not working for my virtual domains. I tried deleting the entire mailing list, re-adding it, doing the fix_url to the domain, but when I send it an email I am getting:
Recipient address rejected: User unknown in virtual alias table
Which I assume is there, due to some error in the virtual_users.db file. no?
I have done the 'sudo postmap /etc/postfix/virtual' followed by 'sudo postfix reload'
but nothing there.
Help?

Yes, that solved it, and I will mark it as solved, however the issue still remains that the email address (which is a mailman list) is not part of the virtual alias table. Any other user that is 'virutally hosted' has the full [email protected] as a shortname. But obviously mailman isnt entering the mailman name into the virtual users database for postfix to read.
Any insight?

Similar Messages

Output quality less than source file in sequence FCP 7

I imported a .mov file into my sequence. It is 1920X1080 Apple ProRes.422. 7 1/2 mins. long. 6.18GB.
I added a new audio file for the entire sequence. Inserted a few edits to the credits using Motion.
I exported, first at Apple ProRes 422 HD also 1920X1080. It ended up being over 9GB. The quality was worse than the
source .mov file. These were both auditioned in Quicktime. The original .mov file looks fine at full resolution,
but not after my export. I've read the manual, consulted my online tutorials, read forums. I believe I have set all my
export settings correctly, yet it doesn't export with the crispness of the original file.
If it is important, the thin color bar just above the playhead and timeline is light purple.
Any suggestions would be greatly appreciated.

Two things are screwing you up.
1. Your sequence frame size is not the same as your original media.
2. Your sequence compressor is h.264 not ProRes.
Take the original clip and drop it into a new sequence.
When FCP asks if you want to match the clip settings, click yes.
Delete that clip then go to your original sequence and copy all the clips then shift over to the new sequence and past them into the timeline.
You may have to remove any distortions (resizing) to have the clips play in full screen.
Export that edit using Export Quicktime (NOT quicktime conversion) with "current settings" and "make self contained" selected.
Once you have that file, use Compressor to create any non ProRes deliverable.
x

Bug: Duplicates not detected when importing photos older than year 2001

If you import photos taken before 1st of January 2001 00:00:00, duplicates will not be detected even if you select the "Ignore duplicates" option on import. The files will be imported twice into the same location with a "-2" postfix added to their name.
Technical details (to help developers):
To detect duplicates, Lightroom uses a so called import hash (AgLibraryFile.importHash in the database) that has the following form:
<capture_time><original_filename><file_size>,
where:
<capture_time> - interval in seconds between 1st Jan, 2001 00:00:00 and capture time recorded in Exif,
<original_filename> - name of source file before import,
<file_size> - file size in bytes.
The problem here is the <capture_time> part, since it gets negative for files older than 2001, since 1st Jan 2001 is sort of considered the beginning of time (called "epoch" in computing). Lightroom seems to get confused on negative timestamps.

I will report this bug. Thanks!

Message older than allowed MessageAge Error while invoking webservice

Hi,
I have a web service using, implementation is annotated with Wssp1.2-2007-Https-UsernameToken-Plain.xml Policy. I am using a java client based no static Service model to connect to the server.
When I try to connect to the webservice from local machine it works fine.
If I connect from a remote machine below exception is thrown. Even If I set both machines to same time zones and tame same exception is thrown.
( client running on windows, server running on linux)
How can I fix this ? Is there a way to configure MessageAge ? or disable it ?
Exception in thread "main" javax.xml.ws.soap.SOAPFaultException: Security token
failed to validate. weblogic.xml.crypto.wss.SecurityTokenValidateResult@18216e3[
status: false][msg UNT Error:Message older than allowed MessageAge]
at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.jav
a:196)
at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilde
r.java:122)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.
java:119)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.
java:89)
at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:118)
at $Proxy36.getAllRootDisTags(Unknown Source)
at SampleNIClient.main(SampleNIClient.java:75)

Hello -
This is the webservice policy violation from client side.
Mainly the time difference is the route cause.
By default WLS will allow up to 300 sec for client message.
You can change the setting by editing the following...
Go to Security Realms >myrealm >Providers >DefaultIdentityAsserter
Then edit Digest Expiration Time Period value according to your requirement.
Regards,
Justin.

How to delete data older than three years from DSO

Hi all,
We needs to keep historical data in the DSO only for three years. One way of doing this is by selective deletion we can delete data older than three years but we want to make it authomated. Is it possible to add a process or ABAP program to delete data older than three years.
If it is p[ossible by ABAP code then can you please give me sample code.
Many Thanks in advance.
Harman

Some time for in case of huge volume of data selective deletion is not works, Try for "prunning" option.
It's work as follows
1)     Create DSO which is same replica of your Source DSO.
2)     Create two transformation
     a) from Source DSO to Copy DSO
     b) Another is from Copy DSO to Source DSO
3)     Transprort Last 3 years records to Copy of Source DSO using DTP Filter range for time.
4)     Once data loading from Source DSO to Copy DSO get completed delete all data from Source DSO.
5)     Now load data from Copy DSO to Source DSO.
6)     After complete loading delete entire data from Source DSO.
I use prunning process to one of my client and it's work perfectly.
Regards,
Sushant
+919820849482

Am unable to view recent History older than 1 day since removing "All Previous History"

I am unable to view any previous history older than the most recent 10 items, since removing "All Previous History". Before removing "All previous History" I was able to view history from, Yesterday, Last Week, last Month etc, but all I can get now is the last 10 items of history.

See http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox

Asset History Sheet Report older than two years

When trying to execute an Asset History Sheet Report (S_ALR_87011990) with a report date (BRDATU) older than two fiscal years the system would not display any information.
can anyone give me a technical reason why the system would not show this information to such date?
thanks

Thank you all.
I have found OSS Note 1433686. has anyone ever implemented it
It says:
Summary
Symptom
In reporting of Asset Accounting, you can make evaluations in closed fiscal years only for the last day of a fiscal year. If you enter a mid-year report date as the report date for a closed fiscal year, the system issues the following error message: AU 116 - "Report date & is invalid for this report".
Other terms
DBADAF05, FORM BUKRS_CHANGE, FIAA_CHECK_REPORTING_DATE, AU116, AU 116, AU172, AU 172, ANLB, ANLBZA, ANLC, reporting, mid-year, report date, closed fiscal year, fiscal year, end of period
Reason and Prerequisites
You require an enhanced function.
Solution
    1. Perform the following manual tasks.
    2. Implement the source code corrections.
    3. The program changes enable you to create an asset report (for example, asset history sheet, asset portfolio, and so on) with a mid-year report date in a closed fiscal year.
    When you execute an asset report, the system informs you that it is a reporting period from a closed fiscal year (information message AU 172).
    If the report date is at the fiscal year end, the system outputs the saved annual values (table ANLC) in the asset report. The asset values are not recalculated in this case.
    If the report date is not at the fiscal year end, the system recalculates the depreciation and the net book value up to this report date with the currently valid depreciation term defined.
        Depreciation terms (table ANLB)
                    In this table, the currently valid depreciation terms are defined.
        Time-dependent depreciation terms (table ANLB)
                    With Release ERP 2005 (ECC 6.0), when you activate the EA-FIN extension set, the system automatically activates the "new" depreciation calculation in Asset Accounting. The new depreciation calculation enables you to specify time-dependent depreciation terms in the asset master records.
                    If time-dependent depreciation terms are defined, the system takes these time-dependent depreciation terms into account for the depreciation calculation (for more information, see Note 1366920).
           Note the following:
           In the mid-year asset report (report date not at the fiscal year end), the depreciations or net book value may have different results in the historical calculation and in the current calculation on the report date. This is due to the asset-related depreciation terms that may have been changed, for example, depreciation key, useful life, and so on.
Manual Pre-Implement.
VALID FOR
Software Component   SAP_APPL                      SAP Application
Release 46C          All Support Package Levels
Release 470          All Support Package Levels
Release 500          All Support Package Levels
Release 600          All Support Package Levels
Release 602          All Support Package Levels
Release 603          All Support Package Levels
Release 604          All Support Package Levels
Release 605          w/o Support Packages
New message: Message class: AU Number: 172
Use transaction SE91 to create the new message.
Message class:    AU
Message number:    172
Message short text:
The report date is in a closed fiscal year.
Enter the following long text (Ctrl+F7):
Diagnosis
The report date is in the past.
The report date can be the year end or any mid-year end of period.
System Response
In a mid-year asset report (report date at a mid-year end of period) in a closed fiscal year, the depreciations or net book value may have different results in the historical calculation and in the current calculation on the report date. This is due to the asset-related depreciation terms that may have been changed, for example, depreciation key, useful life, and so on. In this case, the asset values are recalculated with the currently defined depreciation terms of the fixed asset.

Export -mailbox to move emails older than 400 days to pst file

i have written the below script
$date = get-date
$MailboxList = get-content "E:\del_users.txt"
ForEach ($Mailbox in $MailboxList) {
Export-Mailbox -Identity $Mailbox -PSTFolderPath E:\pstfiles\$mailbox.pst -BadItemLimit 1000000 -StartDate $date.adddays(-450).ToString('MM/dd/yyyy') -DeleteContent
my target is to move all emails older than 450 days to a pst file. i ran this on one user and noticed his emails from today to 450th day from today was moved out.
In simple terms, i want to move all emails in all sub-folders that are older than 01-January-2014. Once this is done and when he logs to owa or outlook he must be only be able to see emails from 01-Jan-2014 to 17-Mar-2015.
how can i achieve this with the above script?
cheers

We are facing this error with few mailboxes which are exclusively in one DB under one Storage Group & the mailbox is on EX001 with Exchange 2007 SP1
We have 2 exchange servers:
EX001 - Exchange 2007 SP1
EX002 - Exchange 2007 SP3 (fully updated)
I have setup a Windows 8.1 32bit machine with Outlook 2013 for running the export-mailbox cmdlet to export mails to a PST file
We are facing this error with few mailboxes which are exclusively in one DB under one Storage Group & the mailbox is on EX001 with Exchange 2007 SP1
We I run the below script,
$date = get-date
$MailboxList = get-content "E:\del_users.txt"
ForEach ($Mailbox in $MailboxList) {
Export-Mailbox -Identity $Mailbox -PSTFolderPath E:\pstfiles\$mailbox.pst -BadItemLimit 1000000 -StartDate “01/01/2005" -EndDate “12/31/2013" -DeleteContent
I get the below error, only from some users and not all users.
Error was found for User ([email protected]) because: Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error:
MAPI or an unspecified service provider.
error code: -1056749164
I went through the link: https://social.technet.microsoft.com/Forums/en-US/3c75a6db-74a4-484c-a7f4-5b411900d09b/exchange-2007-exportmailbox-error-message-on-only-certain-mailbox?forum=exchangesvrdeploylegacy
I understand this is a permission issue and i have tried all of the below
1. The user doing the export is a member of local administrator group in both source and target machine.
2. the user doing the export is granted the exchange administrator role on EMC in both the source and target machine.
3. Given full access permission to the username moving the mailbox to PST
4. given receive-as permission to the username moving the mailbox to pst
5. Given genericall access to the DB
6. Create a New User account (EX: ExportAdmin)
Add this account to a Exchange Server Administrator Permission Both Source and Target Exchange Mailbox Server
Add this account to Local Administrators Group Member Both Source and Target Exchange Mailbox Server
Make sure this account DO NOT HAVE ANY Domain Admin/Exterprise Admin permission(Just keep Domain User group permission)
Assign Mailbox Full Access to this account by follow Cmdlet
Get-Mailbox -Server "EX-CCR" | Add-MailboxPermission -User ExportAdmin -AccessRights FullAccess
Runas with ExportAdmin account (Open EMC)
Get-Mailbox -Server "EX-CCR" | Export-Mailbox -PSTFolderPath
Done
7. On the DB, we set the retention to 0
however none of the above has helped me resolve my issue.
Please help me correct this

Apple installation date shows as default date on all e-mails older than 24 hours. ??

My MacBook was installed on 05/01/06 (the date of the Apple location name and the date many of the applications etc. were created). Recently all e-mails (Mozilla messaging -- Thunderbird) older than 24 hours started showing the date received/sent as 05/01/06. How can I fix this ?

Yeah, I have done all that too.
The second to last time I talked to AT&T, they said they did not have a device type in their computer system and they had to add that in their system. A couple days after they did that, I still had problems. One AT&T rep got an iPhone like mine and set up my e-mail account on that phone and tested it out 10 times by sending e-mail back and forth from phone to computer and etc. He said it worked perfectly fine without any issues. He said to restore phone back to factory settings and that he can tell nothing is wrong with their CWMX.com server as it worked fine for him when he tested out my e-mail account. After I spoke to the rep who did not have problems with the e-mail, I tried sending out e-mail and it would not work. That night, I restored phone back to factory setting as requested. That night after I did that, the e-mail still would not work. The next day, I still had issues. After that, I may have had issues maybe a couple times. Right now as far as I know it seems to be working okay but once I say that, I wonder if I will start having issues again? I wonder if not having my device type in their computer system would cause me all these problems and if so after updating it why did phone still have issues a couple/few days later? I'm sure it wouldn't take that long for it to take in their system if it was the cause.
Since the rep tested out my e-mail account from the city/state where he was located and worked fine, and it didn't for me where I am located.... I am wondering if it has something to do with the area of the local towers?
Nothing makes sense to me... and I have done everything that I possibly know and can. I just hope it continues to work and it stays that way and that I won't start having issues with it again.

Help! All Inbox Emails older than 2-3 weeks have disappeared in Outlook 7, IMAP GoDaddy

Hi,
So we have two computers in the office that are set up with Outlook (email addresses are hosted on GoDaddy) in IMAP. The computer with Outlook 7 was working fine, but a few weeks ago, we noticed that ALL emails older than a couple weeks had simply
disappeared from the inbox! And it keeps happening everyday. As soon as more emails come into the Inbox, some of the oldest (again only a few weeks old) emails just vanish.
All the archive settings are off and Auto Archive has been disabled since the beginning. I have tried to locate a pst file that might have these emails in them but all the files I have been able to find
are archived Sent Mail. All Sent Mail is still available as well as any emails saved in any of the other email folders. What is even more confusing is that all the emails have also disappeared from the Inbox on the GoDaddy server as well! I've
tried the repair tools, I've tried opening Outlook in safemode, and resetting the mailbox views, etc... NOTHING has worked and the issue keeps happening, so we are losing emails daily.
At first, we thought this might be an issue because the email had been linked to an iPhone and we were told that the Apple cloud server had a habit of erasing emails to make space on the server once it got
full, but we disconnected the iPhone comepletely from the account and it is still happening. What's the most confusing is why the emails aren't able to be found on our GoDaddy server, since we have unlimited space on our account.
Anybody have this issue as well? I really need to find these emails, being able to access ALL of our client correspondence is essential to our daily work!
Thanks in advance!

Hi,
If we search the missing items in All Mail Items in Outlook, can you find them?
We can also try to use the Inbox repair tool to scan and repair your Outlook data file to check if it helps. See:
http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA010075831.aspx
Since your emails are disappeared from the server, please also contact your ISP to get assistance on the server side.
Best Regards,
Steve Fan
TechNet Community Support

Reports older than version 9 are not supported

Hello,
I tried to access crystal reports rpt files from java client application:
reportClientDoc.open(filename,0);
and I got the following error meassage as ReportSDKException:
Reports older than version 9 are not supported.
I am using the jar files of the here downloaded JRC pack as runtime libraries (actually in NetBeans IDE 7.2.1).
I tried the followiing packs:
crjava-runtime_12.2.217 : SAP Crystal Reports for Java Runtime Components - Java Reporting Component (JRC)
and
JRC 11.8
giving similar error message.
Is there any older pack available for download prior of Crystal Reports version 9 ? I could not find for very long search.
Or is there any other possibilty to access such RPT files from java? (Actually these file are generated by IBAK-IKAS Sewer Inspection Software).
I suppose VisualStudio is a possibility (which version?), but java would be better for us on our operation system platform.
thanks for any tip
Marcell

Ted,
I am actually using your JSP page code from "Ensuring Report Cleanup" blog.
All my reports have a date stamp of 2006-2009, so they are fairly recently.
And they are 3rd party, not sure I can modify them (technically or legally)
I tried to open several other reports (with more recent datestamp), and got exceptions like:
Error
Error finding JNDI name (CSGSQL_2K5)
What might be causing that and how to fix it?
(I try to open it from file system, not RAS. Running JSP on Tomcat6. maybe some XML config file missing?)
Does it mean that this report is not too old for CRViewer12, so we are one step further ?
Also, how do I pass info to that report via JSP (DB connection, parameters, etc)?
Any good documentation/books on working with CRViewer 12 with JSP ?
I could only find books on how to use CR with .NET.
Sorry for the newbie questions, very new to CR.
TIA,
Oleg.

Windows drivers from retail Snow Leopard install DVD older than the computer

I'm trying to install Windows 7 64-bit on my mid-2010 Core i7 MBP (running 10.6.8) via Boot Camp. Since I am experiencing the "Windows support software is not available" bug when I try to download the drivers etc., it looks like I will have to install the drivers from an OS X install DVD, but I don't have access to the OEM disc that came with the computer.
I do have a retail Snow Leopard DVD that I got to upgrade my old Macbook right when Snow Leopard came out; will this disc (which predates the computer by about one year) have the drivers I need to get the hardware to work with Windows? My concern is that since the disc is older than the computer, the disc may not have the drivers needed for the newer hardware.
Another issue/possible solution: I had planned to upgrade to Lion as soon as this Boot Camp situation is straightened out; would there be a way to get around this issue by upgrading OS X first and then setting up Boot Camp?

Any OS X DVD from 10.6 or later is fine, as we never tire of saying....
Yes, sortof to upgrade OS X first, or leave as is and install Lion on an external drive (you can clone 10.6 only first with CCC to do that). Then clone back is one idea.

Hello, My iCal don't synchronize older events than two or three month ago. How can I do to synchronize all my schedule? In iTunes it's all right in Calendars. I don't put a cross in "synchronize event older than ....... days". Thanks for answer.

Hello, My iCal don't synchronize older events than two or three month ago. How can I do to synchronize all my schedule? In iTunes it's all right in Calendars. I don't put a cross in "synchronize event older than ....... days". Thanks for answer.

Just saw your post. Better late than never. You may want to
consider GameBrix.com, where you can create Flash based, casual
games using your web browser. No downloads are required. You can
create a game from scratch using a library of images, sounds and
game mechanics. You can also upload your own. The online script
editor will allow you to view and edit the ActionScripts associated
with each game mechanic. In short, a great way to ramp up on game
design and build your own game without investing a lot of $
upfront.
BTW I am associated with GameBrix so any feedback is
appreciated.

Voice Memos older than last Sync date not copying from iPhone to PC after sync, even though "Include voice memos" is checked

I am trying to copy over my voice memos from my iPhone to my PC. I have "Include voice memos" checked under the Music tab.
I had an issue with voice memos being duplicated on my iPhone after a sync (I got two versions of each memo on my phone for some reason), so after deleting the extra copies on my phone I deleted all voice memos from within iTunes and chose the option to move the files to the Recycle Bin. So the Music\iTunes\Itunes Music\Voice Memos folder is empty, and there are no voice memos showing up in iTunes.
But now when I sync, it isn't copying over the older memos that are on my iPhone to my computer. If I record a new voice memo then that memo transfers successfully, but any voice memos with a recording date older than my last sync date do not transfer.
How can I get these older voice memos (with dates older than my last sync date) transferred over from my phone onto my PC?

Does anyone know of a way that I can access the voice memos with dates older than my last sync date...?

Mail auto redirecting one account to another; Emails older than 1/5/14 missing from Inbox

On our MacBook Pro running 10.6.8 Snow Leopard, using Apple's Mail 4.6 (1035), my wife's Mail account began experiencing two problems, one starting about 2 weeks ago, the other just recently noticed.
She uses IMAP to download her primary account from DirectNIC. This account syncs the Inbox with her iPad Air. She also POPS mail from a secondary account from WebHostingHub.
1. About 2 weeks ago, emails received by her primary account starting being automatically copied and redirected to her secondary account. Thus, when she uses the "Get Mail" button (or her mail is automatically downloaded), she ends up with two copies of every email in her Inbox, and the ones in her primary account are automatically marked as read.
She does not have any rules in Mail, nor does she have any email forwarders in her DirectNIC or POP settings. We can not figure out how this automatic forwarding started or how to turn it off. We have rebuilt the Inboxes for both her primary and secondary accounts.
2. Yesterday my wife noticed that her Inbox for her primary account is missing emails she had in there that were older than January 5, 2014. All older emails that had previously been in her Inbox are now gone, and we can not find where they went. We have not made any changes to her Inbox's behavior, and she was barely using even 1% of her quota on her primary email's IMAP server at DirectNIC.
Any clues about how to fix any of the above would be welcome.
Charlie

I called my ISP and sorted out the problem. Something changed in the behavior of the POP account so that it started causing both of the problems I described in my original post. That POP account was using the same email server info as the primary account, and was removing emails after a week, as well as looping back emails sent to the primary account, creating the duplicates.
I deleted the POP account, which fixed both problems. She forwards emails sent to her secondary account to her primary account. I then used the directions at http://support.apple.com/kb/ta23485 so that she can send emails from the email address she is using as her secondary account.
Charlie

/etc/postfix/virtual_users.db is older than source file...

Similar Messages

Maybe you are looking for