ETC Spread date ??

Hi All,
Can any one expand ETC Spread date.
That is the error I am facing while running concurrent program.
thanks

These photos are also spread across the various catagories of date, event, faces etc.
These are all the same photos, viewed from different perspectives.
The basic "unit" in iPhoto is the Event, and that's based on the date and time in the Exif metadata.
Date is the most common and basic way to organise, but the opportunities are enormous.
I use Events simply as big buckets of Photos: Spring 08, July - Nov 06 are typical Events in my Library. I use keywords and Smart Albums extensively. I title the pics broadly.
I keyword on a
Who
What
Where basis (The When is in the photos's Exif metadata). I also rate the pics on a 1 - 5 star basis.
Using this system I can find pretty much find any pic in my 40k library in a couple of seconds.
So, for example, I have a batch of pics titled 'Seattle 08' and a typical keywording might include: John, Anne, Landscape, mountain, trees, snow. With a rating included it's so very easy to find the best pics we took at Mount Rainier.
File -> New Smart Album
set it to 'All"
title contains Seattle
keyword is mountain
keyword is snow
rating is 5 stars
Or, want a chronological album of John from birth to today?
New Smart Album
Keyword is John
Set the View options to Sort By Date Ascending
Want only the best pics?
add Rating is greater than 4 stars
The best thing about this system is that it's dynamic. If I add 50 more pics of John to the Library tomorrow, as I keyword and rate them they are added to the Smart Album.
In the end, organisation is about finding the pics. The point is to make locating that pic or batch of pics findable fast. This system works for me.

Similar Messages

Change the day view(Mon, Tue etc) to date view (06/03,06/04) in CAT2 tcode

I am trying to change the view in CAT2 worklist and data entry area from days (like Mon, Tue, Wed etc) to date view (06/03, 06/04, 06/05 etc) in the columns.
Can anyone please help me on this?

Hi,
Go to
SPRO -> IMG -> Cross-Application Components -> Time sheet -> Cats Regular -> Set Up Data Entry Profile
Select the profile and click on glass.
Then in general settings check Display Weekdays checkbox
It determines that the system displays the days in the time sheet worklist and data entry section as weekdays (MO, TU, WE, for example). In the data entry section, the date is displayed in addition to the weekday.
If you do not select this option, the day's date appears in the format 01.01 or 01/01. This format is recommended if you use this profile to enter data daily or monthly.
Hope this will help
Regards
guds

Best practice to integrate the external(ERP or Database etc) eCommerce data in to CQ

Hi Guys,
I am refering to GEOMetrixx-Outdoors project for building eCommerce fucntionality in our project.
Currently we are integrating with an ERP system to fetch the Product details.
Now I need to store all the Product data from ERP system in to our CRX under etc/commerce/products/<myproject> folder structure.
Do I need to create a csv file structure as explained in the geometrixx-outdoors project and place it exactly the way they have mentioned in the documentation? By doing this the csvimporter will import the data in to CRX and creates the Sling:folder and nt:unstructured nodes in to CRX?
Please guide me which is this best practice to integrate the external eCommerce data in to CQ system to build eCommerce projects?
Are there any other best practices ?
Your help in this regard is really appreciated.
Thanks

Hi Kresten,
Thanks for your reply.
I went through the eCommerce framework link which you sent.
Can you get me few of the steps to utilise eCommerce framework to pull all the product information in to our CRX repository and also how to synchronise between the ERP system and CRX data. Is that we have a scheduling mechanism to pull the data from our ERP system and synch it with CRX repository?
Thanks

Spread Data Over Multiple Months & Years with Data from Multiple Years

Hello Everyone,
I have a complex calculation for spreading values over several months spanning mulitle years. Because we have a 36 month rolling Forecast, a more sophisticated calc is required as opposed to hard coding months or years.
Heres the description:
Users enter the following data,
FY11     BegBalance     Number of BOD Members     10
          BOD Options Vesting Months     20
          BOD Options Accounting Value     10
          BOD Options- Number of Shares     100
          BOD Grant Month     Aug
FY12     BegBalance     Number of BOD Members     5
          BOD Options Vesting Months     10
          BOD Options Accounting Value     5
          BOD Options- Number of Shares     200
          BOD Grant Month     Oct
FY13     BegBalance     Number of BOD Members     20
          BOD Options Vesting Months     8
          BOD Options Accounting Value     20
          BOD Options- Number of Shares     100
          BOD Grant Month     Feb
Based on the above;
"BOD Stock" is calculated as following/month=Number of BOD Members*BOD Options Accounting Value*BOD Options- Number of Shares/ BOD Options Vesting Months
Start month for the above is based on "BOD Grant Month". So, for instance considering data for FY11:
The total "BOD Stock" value is $10000 (originating from FY11) with start month of AUG in FY11 and the number of months to spread over is 20 months. So, essentially the "BOD Stock" per month (originating from FY11) is $500 starting from AUG FY11 to Mar FY13.
Similarly, the total "BOD Stock" value is $5000 (originating from FY12) with start month of OCT in FY12 and the number of months to spread over is 10 months. So, essentially the "BOD Stock" per month (originating from FY12) is $500 starting from OCT FY12 to JUL FY13.
The challange I am facing is because of the number of months to spread. Because I have data to spread from multiple years and each year's data spills into the following years, each year should accumulate data from prior years. For instance;
FY11 should include only FY11
FY12 should include FY11 and FY12
FY13 should include FY11, FY12 and FY13.
Could anyone suggest a smarter way to do this without writting code for each year, maybe using @MDALLOCATE function? The following shows how data should be spread and accumulated.
                         BegBalance     Jan     Feb     Mar     Apr     May     Jun     Jul     Aug     Sep     Oct     Nov     Dec     Period
FY11     Number of BOD Members          10     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Options Vesting Months          20     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Options Accounting Value     10     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Options- Number of Shares     100     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Grant Month               Aug     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
          BOD Stock               10000     #mi     #mi     #mi     #mi     #mi     #mi     #mi     500     500     500     500     500     #mi
FY12     Number of BOD Members          5     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Options Vesting Months          10     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Options Accounting Value     5     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Options- Number of Shares     200     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Grant Month               Oct     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
          BOD Stock               5000     500     500     500     500     500     500     500     500     500     1000     1000     1000     #mi
FY13     Number of BOD Members          20     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Options Vesting Months          8     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Options Accounting Value     20     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Options- Number of Shares     100     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
     BOD Grant Month               Feb     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi     #mi
          BOD Stock               40000     1000     6000     6000     5500     5500     5500     5500     5000     5000     #mi     #mi     #mi     #mi
Appreciate your inputs!
Edited by: user10678366 on Oct 12, 2010 3:21 PM

Why not use substitution variables for Years? you could have something like &Year1, &Year2, &Year3
Cheers

Master page spread - data merge problem

ok - I prematurely posted b4 that I could successfully do this but am stuck with one problem that is a show stopper.
I have a master page spread [left and right pages] which has several fields which I populate on over 200 pages with data merge. I got this to work ok but teh snag is that the merge only works on teh first master page - and since InDesig automatically starts with a right hand page - this would be teh 2nd page of my spread - I can get both pages to merge data correclty but I wind up with a starting right hand page - then a left hand page facing a right hand page which is not for hte same record but the record below it. Is tehre any way aroudn this? Is tehre any way I can force inDesign to start with a left hand page?

whohee - it worked - thanks a bunch - you guys in this forum are gre
at!

Spreading data cell values without quarters on the web form

Hi,
I have a question i know this cant be done but i was looking if there might be any other ways to do grid spread in data form. Is there any way i can use grid spread option of having without Qtrs on data form like i would display all months from jan:dec and year total ???
Thanks
Edited by: user10528932 on Mar 17, 2010 7:54 AM

My data form looks like below
Condition 1:                    Jan     Feb     Mar............     Dec     YearTotal
Customer1     Acct     FY11
Condition 2:                    Jan     Feb     Mar      Q1............     Dec     Q4     YearTotal
Customer1     Acct     FY11
In condition 1 if i would like to use Grid Spread it doesnt do anything whereas in condition 2 and do Grid Spread it works fine. What i am looking for is if i am using condition 1 is there anything we can do such that users can use the functionality of Grid Spread.
And John could you please let me know where can i find the java script in order to use this functionality.
Thanks

I have just bought a new iphone 4 as an upgrade to my iphone 3GS. How can I transfer all my apps and data to the new iphone 4 and keep facetime etc on the new iphone 4. If I do a restore of the iphone 3GS I only get the 3GS apps (i.e. no facetime)

I have just bought a new iphone 4 as an upgrade to my iphone 3GS. How can I transfer all my apps including saved levels in games etc. and data and folders to the new iphone 4 and keep facetime etc on the new iphone 4. When I have done this for someone else they got all their data etc but lost the Face Time App and teh iphone 4 looked like the iphone 3 screen.

There is no FaceTime app for the iphone, FaceTime is built into the iOS. Follow the directions here:
http://support.apple.com/kb/HT2109

Dialog programming, data being washed out in TAB Control

Hi,
     i am working on dialog programming , in which i am using Table Control for user input (data is not coming from database table) . everything is going well till assignment of data to internal table but when
control goes to PBO by any means like pressing ENTER etc. then data being washed out.
PROCESS BEFORE OUTPUT.
MODULE TC_CONTROL.
LOOP AT it_data
         INTO wa_data
         WITH CONTROL tc_control
         CURSOR tc_control-current_line.
    MODULE tc_control_get_lines.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT IT_DATA.
    CHAIN.
      FIELD WA_DATA-FREPS_N.
      FIELD wa_data-TOEPS_N.
      FIELD wa_data-PRCH_A.
      FIELD wa_data-SRVC_AMT .
      FIELD wa_data-ACCNT_C.
      FIELD wa_data-AMT_D.
      FIELD wa_data-NARR_X.
      FIELD wa_data-CRPRD_N.
      MODULE tc_control_modify ON CHAIN-REQUEST.
    ENDCHAIN.
ENDLOOP.
*Abap program
MODULE TC_CONTROL OUTPUT.
DESCRIBE TABLE it_data LINES tc_control-lines.
ENDMODULE.                 " TC_CONTROL OUTPUT
CONTROLS: TC_CONTROL TYPE TABLEVIEW USING SCREEN 1000,
          TC_CONTROL1 TYPE TABLEVIEW USING SCREEN 1000.
DATA:     G_TC_CONTROLS_LINES LIKE SY-LOOPC,
          G_TC_CONTROLS_LINES1 LIKE SY-LOOPC.
*&      Module tc_control_get_lines OUTPUT
      text
MODULE tc_control_get_lines OUTPUT.
g_tc_controls_lines = sy-loopc.
move-corresponding it_data to wa_data.
ENDMODULE.                 " tc_control_get_lines OUTPUT
MODULE tc_control_modify INPUT.
move-corresponding wa_data to it_data.
MODIFY it_data
    FROM wa_data
    INDEX tc_control-current_line.
append it_data.
clear it_data.
ENDMODULE.                 " tc_control_modify INPUT
Please suggest me any clue.
Thanks in advance
vijay dwivedi

Hi ,
I have understood the problem.
In your ABAP code replace all the occurrrences of wa_data with the structurename.
Use the TABLES keyword to declare the structure .That structure will be same as
reference table of the table control .
Here the structure is SPFLI.
Check the bellow code , it will resolve the issue.
ABAP code - -
program zsdn.
tables spfli. " Declare the structure
data : it_data like table of spfli with header line,
*wa_data TYPE spfli, " commented
w_i type i.
*CONTROLS TC_CONTROL TYPE TABLEVIEW USING SCREEN 100.
controls: tc_control type tableview using screen 1000,
tc_control1 type tableview using screen 1000.
data: g_tc_controls_lines like sy-loopc,
g_tc_controls_lines1 like sy-loopc.
module tc_control output.
describe table it_data lines tc_control-lines.
endmodule. " TC_CONTROL OUTPUT
module tc_control_get_lines output.
g_tc_controls_lines = sy-loopc.
move-corresponding it_data to spfli.
endmodule. " tc_control_get_lines OUTPUT
module tc_control_modify input.
move-corresponding spfli to it_data.
modify it_data
from spfli
index tc_control-current_line.
append it_data.
clear it_data.
endmodule. " tc_control_modify INPUT
module status_0100 output.
set pf-status 'STAT'.
* SET TITLEBAR 'xxx'.
endmodule.                 " STATUS_0100 OUTPUT
module user_command_0100 input.
case sy-ucomm.
    when 'BACK' or 'EXIT' or 'CANCEL'.
      leave to screen 0.
endcase.
endmodule.                 " USER_COMMAND_0100 INPUT
*&      Module POPLATE_TABLE OUTPUT
*       text
module poplate_table output.
if it_data is initial.
    select * from spfli into table it_data.
endif.
endmodule.                 " POPLATE_TABLE OUTPUT
Screen code (Scr no 1000) - -
PROCESS BEFORE OUTPUT.
MODULE status_0100.
MODULE poplate_table.
MODULE tc_control.
LOOP AT it_data WITH CONTROL tc_control CURSOR w_i.
    MODULE tc_control_get_lines.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_0100.
LOOP AT it_data.
    MODULE tc_control_modify ON CHAIN-REQUEST.
*    ENDCHAIN.
ENDLOOP.
Regards
Pinaki

My iPhone 5 wont switch on after update, says that I need to plug in to iTunes to reset all data, but I dont want to loose my things and I haven't backed it up for months, what should I do?

I wanted to get new update but phone wont turn on without resetting it in iTunes I have tried pressing the home button and the off/on button together both whilst and not plugged into the computer but it doesn't want to work without getting rid of all my photos/videos and music...etc.

Your data is already lost. You must restore your phone in order to be able to use it. This is why Apple offers you two ways to back up, including iCloud, which backs up automatically over wireless every night if you're plugged in to power and the screen is locked. How much easier could it be? Yet you say you haven't backed up in months. If your phone was lost or stolen, or you dropped it in a puddle, you would be in the same boat. PEOPLE: BACK UP YOUR STUFF!!!!
Signed, The Back Up Nag

How do I transfer my data to my new macbook pro using an external hard drive?

I've already set up my new MacBook Pro is my issue. It asked me if I'd like to "Migrate" my stuff or use an external hard drive etc but at the time I didn't transfer my data from my old MacBook yet. I was going to manually do it later as I had to wait for my External hard drive to back my old Mac up. Now it's that time and I have no idea how to do it. I believe I've researched best of my ability.
I feel like I'm asking a pretty dumb question. If I were to just drag all my programs out like my Adobe Suite on to my new macbook pro would that work? I feel like that's just too easy and incorrect. Please and thank you.

The Adobe suite can be downloaded free, you dont have to copy it at all, under standard CS6 Adobe rules, if you own the suite, you get 2 computers "activated at any one time" Make sure, if youre not using the older computer, you deactivate the software under the HELP menu in Adobe.
format the new drive in disk utility ......APPLICATIONS.....UTILITIES.....DISK UTILITIES.......select the external drive and format (if its new and empty!!!) under the ERASE button with Mac OSX extended journaled
copy all your important stuff from older computer , pics, files, documents, personal anything.
most of you apps, i ASSUME you bought in the (other than Adobe software, or Office suite, etc etc,..... obviously) in the MAC APP store, so you can reload them on the new computer without copying them , makes things very easy......just open APP STORE, and download what you already bought.
really the only important things , is copy all important work files, documents, pictures, personal ABC...XYZ...... obviously.
the migration is about emails, contacts, etc etc etc, also data, just because you passed it by at the time doesnt mean you still cant do it, go to the SEARCH at menu at top and type in MIGRATION ASSISTANT to do it again , since you passed it by at first .
the only thing you NEED / SHOULD copy is all your personal stuff........Applications need to be reinstall from either ONLINE download,.......or from the MAC APP STORE,........ you cant just copy the apps over (in most cases) and toss them onto the new computer
Nahh, there are no dumb questions, just dumb mistakes because you DIDNT ask any questions, and we all make those here and there.

Want to use NO data, but Wifi?

Hi, new owner of the Curve 9300/3G, running OS 6.
I am currently on a voice/text plan, but have Data available (although I will get charged ridiculously on it).
So I want to use NO data, by all means. But I want to use Wifi when I'm at home.
I've read online that Wifi won't work if Data Services are off. Okay, so if I turn Data services ON, I can successfully use Wifi (facebook, email, youtube, etc.). Good. But now, when I take my phone outside, is it going to update my facebook, youtube, email, other apps, etc. by Data/3G? --> This is what I don't want, and what I am afraid of. This is why I haven't even begun using Wifi yet, because of the fear of the Data kicking in to update my apps while I am not on Wifi.
So, is there any way to keep data/3G off for good, and have no data charges? Is the only solution to not use wifi at all, and strictly use the phone for calling/texting?
Thanks!!

OnlySkillz wrote:
Ok so I think I found the solution..tell me if this is correct:
When I want to use WIFI, I just enable Data services, and use my WIFI.
When I'm outside without WIFI, I just have to set Data services to OFF before I leave, so that it doesn't update any apps for me while I'm on the go.
Is this correct? Thanks.
Yes this is correct, you'll have to turn off your data services before leaving the house or your facebook, email, msn ect will still update.
Did i help you with this problem? if so please show your appreciation by clicking the Like button inside of my post. Please remember I am not a RIM employee the support forums are user-to-user, not user-to-RIM.

Consistent Data Issues Even After Replacement

I don't know whether to blame the phone or the ice cream sandwich update for all the problems I have been having with my RAZR. When I first got it six months ago it was great and I loved it now after the ice cream sandwich update I dont really like it anymore. I never had any sort of issues while using it on gingerbread. Today, I have seen my phone switch constantly between 3g and 4g more times than I can count over the course of half an hour. I couldn't even get a consistent signal to watch a 3 minute youtube clip.
First off, I updated it to ICS but first wiped the phone clean including cache, etc. So it would have basically been a clean install. Now, I have certain issues. The 4g and 3g switch is terrible. On the street and in my own house I have had the same thing happen. In my house I get anywhere from 3-5 bars of 4g but it still switches over to 4 bars of 3g. I have even seen it switch from 4g to 3g when I had full bars. I have already replaced the sim cards, but I am still having these issues. It's actually happening on all 4 of my RAZRs on my family plan. I have gone through the network resets where I pull out the sim card and for 30 seconds, insert it, power on the phone, etc. I went through all 4 of them with the Rep over the phone. I have also had several instances where I did not have data but signal bars and then I didn't have absolutely anything at all. I live in a "major" city metro area, Boston, and I can't believe I am having these problems.
At first I would have gone off and blamed Verizon, but it is definitely not Verizon, it is our phones that are terrible. I can confirm this because my brother uses an ipad (4g Verizon) on a separate account and he consistently maintains 4g even though I have seen it go as low as two bars. Yes, I understand the ipad is a different device and may have a different radio, but that is exactly how our phones used to work on gingerbread. I received a replacement device and I am still having the same issues. Also, the headset speaker, not the speaker on the back, or receiver is really tinny during phone calls even with the in call volume down half way. It is really annoying and the little tone that plays after hanging up makes the speaker sound like its about to blow out. I don't know what to do if the RAZR will keep having data issues because this is absolutely ridiculous. I know i'm not entitled to anything but for $310 a month I mean come on, I just want my phone to work properly. As I am typing this now, I have witnessed my phone switch between 4g, 3g, and no signal at least 5 times and of course my brother's iPad on Verizon has kept its 4g signal.

Thanks for all the suggestions, but they just don't work at all guys. I've even tried that restore connectivity app from Motorola, but of course it didn't work. I don't like that I keep having constant switches between 3g,4g, and no signal bars. It's awful thats just what it is. I feel like I got gipped with this update promising better user experience. If the darned thing can't connect to their network, then what is Verizon doing to address these issues? Every time I try to do something "data intensive" (i.e. youtube, facebook, twitter, etc) the data signal just drops and I'm either left with gray bars and no data or no signal bars whatsoever. Also one thing that annoys me to death with this phone is that I have it sitting in my pocket after I lock the screen and I go to pull it out of my otherwise empty pocket. The screen is turned on by itself (I have the clear silicon case on it so the power button shouldn't be pressed by itself and no I don't wear skinny jeans), its got 3g and no bars, and its piping hot.
WHAT IS WRONG WITH THIS PHONE VERIZON???!!!

Printing emails date/time in headings

How do I adjust the header : left, middle, right etc to select date/time that is the same as that of the message on sending msgs.
Cannot find the list of format controls for such when in print preview, print, options (say centre),, custom, format controls etc.
I do NOT want today's date/time only e.g., when the message was sent or received (i.e., local date/time).
The only way I have found so far is to print the message source which can be a bit long.
Using Thunderbird 24.4 under Linux with Mageia v4 distro (all fixpacks etc).

The date offered is the date time printed. You do not get the option to modify which date and time is used. If you feel it is not correct, simply remove it.

Recovering data from one machine to another

Hi all;
I've mentioned this in another thread but would really like to deal with it. Recently, I had to move my iPhone from one machine to another. All was well and I managed to move all my apps from one machine to the current one. The problem is with a purchased app called TripLog that stores data on driven mileage. On moving the app over, I didn't get the data.
I contacted the software people and this is what I got:
"As far as data, the iTunes software automatically backs up all data to the desktop. The "Apple data" (contacts, calendar, etc) are backed up to the corresponding desktop apps (Address Book, iCal, etc) but data from "3rd party" apps are backed up in an encrypted, totally nonaccessible (to anyone but iTunes) format. That is used by iTunes when you do a "Restore".
"I would call Apple tech support if I were you, because unfortunately, that's all we know. The data IS somewhere on the desktop (I believe) but how you could transfer it to a new handheld I have no idea."
So the question is, Where is that data stored? In my user/Music/iTunes/Mobile Apps folder there were three versions of this app. I tried moving them all over and kept getting dialogs asking me if I wanted to repace an older version with the newer ones I was moving over. Since my iPhone and the new host computer didn't have TripLog I assumed I should replace but now I am not sure.
I can stil move over these files, but I have a feeling that they are not data so much as simply the app itself. Where is that data stored?
For the record, I have moved files from an iMac G5 to a Macbook running 10.6.1 and iTunes 9.0.1 with an iPhone 3G running 3.0.1
Help?
Stan

Many thanks!!! One more question; do I just move that file over and drag and drop or do I need to do an import into the folder, "Automatically Add to iTunes?" Further, will this affect all my data on the phone? For example, I have synced and made changes in things like iCal, Address Book, Mail, etc. Will the last few days be wiped out or replaced by the moved-in data?
Stan

Forms pulling Multiple Records from an XML Schema and XML data files - Adobe LiveCycle Designer

I built a form in Adobe LiveCycle with an xml schema and data file. The problem is with how the form renders the xml data file.
I have a statement element that consists of about 6 fields (statementID, statementName, statementAddress, statementCountry, statementZip, statementDate, etc) of data in the schema that allows for multiple iterations - so one xml data file can contain multiple statements. These fields allow for null values.
But here's the problem: When any of the statements - say statement 2 of 6 - has a null value in one of the fields, if the xml data file doesn't have a placeholder
(example of placeholder: <statementName type="String"/> )in the xml for that field, my form pulls the field value from the NEXT statement.
This corrupts all the rest of the statement records, as this field is shifted up for all the rest.
I know that in the past I haven't needed a placeholder when a field was null. But I'm wondering if when the data allows for multiple records the xml data file needs to generate the placeholder. And where is the problem? In the Schema? The xml data file? My form? And the 64-thousand-dollar question: How to fix it?

If your <statement> element is the one that repeats, it should be bound to a subform with the binding string of something like $.statement[*]. Then in that subform should be your fields and they should have bindings of $.statementID, $.statementName, $.statementAddress, etc.
Kyle

ETC Spread date ??

Similar Messages

Maybe you are looking for