Eterm intall problem - libpcre.so.0 missing

I installed Eterm using 'pacman -S eterm'. When attempting to run it or use Esetroot to set background in fluxbox, I get the following error:
$ Eterm
Eterm: error while loading shared libraries: libpcre.so.0: cannot open shared object file: No such file or directory
Can anyone point me in the right direction in solving this?

i have just installed pcre and eterm but on konsole when i typed eterm it returns me with
bash: eterm: command not found
how can i start eterm (i am using fluxbox9

Similar Messages

My printer is showing there is an ink problem or printhead is missing

My printer is showing there is an ink problem or printhead is missing or not detected. I've replaced the ink cartridges.

Hello @Mdguz and welcome to the HP Forums!
I can see you're experiencing ink system issues. I would like to try and help.
I would recommend removing the ink cartridges from the printer, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
Another suggestion would be to plug the printer power into a different wall outlet.
I would recommend updating your firmware as well:
HP Officejet 6700 Premium e-All-in-One Firmware
I would then suggest utilizing this document on A 'Missing or Failed Printhead' Error Message Displays on the Printer or on the Computer.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Are you having problems syncing with Pocketmac, Missing Sync or Media Sync? Here's what I did...

Just throwing this out there as a solution that worked for my situation. It may not work for everyone's needs.
After NUMEROUS emails back and forth with Pocketmac support I was finally told that Pocketmac will not work if Media Sync is also installed. It causes the "Error 1 Skipping" problem due to a USB driver conflict. So I tried Missing Sync's free trial. No good. It would not sync either, so paying money for the non trial version wasn't going to happen.
So, I ended up keeping Media Sync to keep my iTunes library synced and I started to use a wonderful little free app called "Google Sync". It works beautifully for my needs. It runs in the background (with no negative effect to the BB's performance or battery life) and automatically syncs your gmail contacts and google calendar to your BB device. If you change something on either the BB itself or online, google sync catches it and updates the other accordingly.
So if your sick and tired of messing around with Pocketmac and Missing Sync, give Google Sync a try. I love it!

it was only burning at 4x even though 47x was requested.
That's a issue discussed in the past.
It turns out that 8X DVD burning means about 47X CD burning - you were requesting 8X DVD but only got 4X DVD burning.
I haven't seen it discussed anymore so maybe Apple got around to eliminating that 'quirk' in terminology.
I suspect some of the early 8x DVD burners didn't perform as advertised. I'm glad your new 16X burner is working for you.

How to analyse a problem in BI ( Example missing Data in a report )

Hello;
What is the best procedure to analyse a problem missing data in BW. the question could be unclear but I am looking for a method to determine directly and without taking long time in follwing the dataflow to be able to say that we have a problem getting a field A ou B.
Regards
Anis

Hi Anis,
you can debug data flow or let's say specific data load between 2 objects e.g. datasource and DSO or DSO an cube etc... you can track down e.g. like specific sales order was loaded e.g some specific field is treated within the load (e.g. in case there is ABAP routine used). However it is always better to start either from:
top->bottom = report->datasource (source table or extractor checked)
or
bottom->top = datasource->report
and go layer by layer (or infoprovider by inforprovider) to see if particular value is still there.
cheers
m./

Problems with 3D games: missing QT component?

I'm having trouble getting Nanosaur II: Hatchling to run on my iMac G5. It worked fine under 10.3.9 & QT6 until I reformatted my hard drive, installed Tiger and reinstalled the game from the DVD that came with my computer. I'm running 10.4.2 with Quicktime 7.0.1 and whenever I try to launch the game it crashes after allowing me to choose the resolution and then displaying a couple of error dialog boxes:
"DrawPictureIntoGWorld: GetGraphicsImporterForFile failed! One of Quicktime's importer components is missing. You should reinstall OS X to fix this."
and
"SetMetaObjectToPicture: DrawPictureIntoGWorld failed!"
I get the same errors from Pangea's Enigmo. I also can't get Warcraft III (with Frozen Throne expansion installed) to work. The intro video played fine but then I get just a pointer but no background in what should be the menu screen and nowhere on the (blank/black) screen responds to clicking (no errors displayed). (Incidentally, GarageGames' Marble Blast Gold is working fine but World Book 2004 won't show any articles).
I've tried re-installing the various games, Tiger and QT7 several times, both as updates and as a clean installation of the OS (archive and install) and none of this makes any difference.
Can anyone please help?

did you try updating nanosaur? there is an update from their site. my problem is that i can't get player 1 and 2 controls working at the same time.

Address book sync problem: Phone #s & emails missing fr. iPhone

When I sync, I overwrite the iPhone address book and calendar with the one on my computer. I choose 'Replace information on this iPhone.'
Suddenly, none of the emails or phone numbers are showing up in the address book records on the iPhone. All the records are there, they're just missing the phone #s and emails. The phone numbers and emails are on the computer version of Address book, and other changes in the name and notes fields for each record are showing up.
Any ideas what could be causing this and how to fix it?

I'm not sure what you mean. When I look in the Address Book, I see the email addresses for each of my contacts, but the problem is they aren't syncing to my iPhone. Do you know how I can resolve this???

Seeburger AS2 comm channel problem (B2B) - "perhaps AS2ID missing"

Hi guys!
We try to configure B2B scenario using Seeburger AS2, but communication channel monitor returns error:
Error type: COMPONENT_ERROR,NOT_TRANSMITTED >> Error date: 9/25/07 10:05 AM >> Description: AS2 Adapter failure Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.. com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:321) [9/25/07 10:05 AM]
We're not sure about the scenario configuration and using identifiers (cos' this is probably the problem).
Did someone of u already configured Seeburger AS2?
We have configured in receiver party alternative identifier Seeburger - AS2ID, however, the message sent to target has always agency XI and scheme XIParty. It should be probably Seeburger and AS2ID (the alternative one).
<SAP:Receiver>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">XXXX</SAP:Party>
<SAP:Service>BS_3RD_XXXXX</SAP:Service>
<SAP:Interface
How to achieve it?
Thanx a lot!
Peter

Hi Anoop!
Yes, we use it on receiver side.
ModuleProcessorExitbean exists, so it should be ok.
What I'm not sure about is the thing with identifiers..
In Party (let's call it X) - Identifiers, we have default agency http://sap.com/xi/XI, scheme XIParty and name X.
What values should be there for Seeburger?
We have Agency: Seeburger, Scheme: AS2ID; Name: X.
Is it correct?
We also received some 9 char long number - probably some ID to adapter(?). Any idea, if it is necessary and where to use it?
Is it necessary to configure identifier seeburger also in Identifiers tab of Receiver communication channel? Or we can leave it empty (both- sender, receiver)?
We use this in B2B scenario, of course: Target system is party, but we use our R/3 as Business System w/o party. Is it ok, or do we laso have to "be" as Party in our configuration scenario?
A lot of questions, but points will be awarded 4 sure
Thanx!
Peter

Importing problem w/ mini DV (missing frames)

Hi all,
I have two different sets of mini DV tapes (shot with 2 different cameras). They are both game footage for football. Each set provides a different angle (wide angle and tight angle views). I imported both onto iMovie however I had problems with the tight tapes.
The wide angle tapes import just fine but when I try the tight tapes they don't register in the "frame boxes" to the right of the monitor. To be clear, the video itself shows up in the monitor just fine but doesn't appear in real time within the frames...and eventually it does but when I play it back the video is missing frames and is very jumpy.
Because the wide tapes work I know I'm not doing some basic thing wrong- I'm curious as to why the tape from the tight DVs doesn't register. I know the two cameras were different so consequently the two mini DVs are different. Does this have anything to do with the settings of each? It's very odd...any thoughts?
-Greg

Welcome to iMovie Discussions.
Were the poor tapes shot at LP or Super-LP speed?
Could the heads in the poor (narrow) camera need cleaning? (Camcorders, especially Sonys, sometimes replace poor frames 'on-the-fly' while you're watching in the viewfinder, or on a monitor, but that doesn't happen when the poor recordings are exported via FireWire.)
What happens when you swap the tapes between the camcorders and then import? ..In other words, is it the tapes or the camcorders?
(NOTE: a Super Long Play tape swapped into another camcorder may not play back properly because of discrepancies in head alignment ..which may be causing the poor importing anyway - tape and heads shrink and expand in temperature extremes, so shooting a Super LP tape outdoors on a cold day and then replaying indoors in the warmth may produce poor tape/head alignment.)
Which cameras were they, and what happens when you swap the tapes between cameras?

Problems with query transport (missing object)

Hello,
I've a problem while transporting a query with the transport connection. I choose the option "necessary objects" but the import in the productive system fails due to a missing object.
How can I find the missing object? In the transport log only the ID is given (e.g. " Element 67ZP0WYO09DFA52PLG2SREVBT is missing in version M")
Thanks in advance,
Markus

Hi Markus,
Check data base tables RSZELTXREF & RSZELTTXT for the missing element in the transport.
Try to include all the missing elements of a Query in a new transport and try again.
Hope this will help.
Praveen

Animation Tween Problem - Motion am I missing somthing..?

Screen shots, a simple fly-in, keep move slowly, then fly out, but for some crazy reason Premiere keeps creating a tween that does not exist and adding a bounce that looks pants... this is very, very simple animation it surely should not be doing this, or am I missing somthing, equally I'd love to have motion splines can I switch them on as this would likely fix the issue...
The mistery tween that does not exist...?
The other Keyframe...
If I add an additional manual tween, it just replicates the problem further, so I end up with two bounces I don't want. Any help would be peachy,
Samantha

Well found the linear option etc, right click, but cannot find temporal & spatail, it would just be nice to have a spline on the motion position. To be frank Premiere's behaviour is just being odd in gerneral Ann. It just lost keyframes on the button/Badge element. Well there was none there but the animation still remained uneditable. Going to reload the project, but think it's likely best I pop out to After Effects for the Motion Graphics, or it will drive me bonkers lol

Problems using assertionTicket due missing entry in SLD/CIM

Hi all!
We have a problem on our SLD of the solution manager.
If i try to create a a jco connection on any portal system using SSO (assertionTicket) I got the following error message:
Exception while creating JCo client connection Failed to create new JCO client connection TEST: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Failed to create new JCO client connection TEST: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_FAILED: Value not allowed by VALUEMAP for property SAP_MsgServJCODestination.UserHandling: useAssertionTicket at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120) at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.getIResult(SimpleResponseAnalyser.java:53) at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:218) at .....
If i check the sld on our solution manager, using the class browser (class hierarchy:
CIM_ManagedElement -> CIM_ManagedSystemElement -> CIM_LogicalElement -> CIM_EnabledLogicalElement -> CIM_ServiceAccessPoint -> SAP Service Access Point -> Service Reference -> JCO Destination, Technical Name: SAP_MsgServJCODestination, Property: UserHandling/Qualifiers/Valuemap) the value useassertionTicket is missing!
So the error is right!
My problem is know why, because on a different system with equal CR/CIM Content the entry is there!!
SLD Version of the system where the entry is missing:
SLD-Version: 7.0103.20081105085525.0000
CIM-Modell: 1.5.47
CR-Content: SAP_CR 5.8 (produced 03/05/2010)
JAVA-VM: IBM Corporation 1.4.2 on AIX 5.3
SLD Version of the system where the entry is available:
SLD-Version: 7.0020.20090706152949.0000
CIM-Modell: 1.5.47
CR-Content: SAP_CR 5.8 (produced 03/05/2010)
JAVA-VM: IBM Corporation 1.4.2 on AIX 5.3
Has anybody an idear what the problem is or what I can do anymore?
Thank you for help
Best regards
Thomas
Edited by: Thomas Wassenhoven on Mar 17, 2010 11:42 AM

Dear Thomas,
As per the log it is showing the CIM_ERROR_FAILED.
com.sap.lcr.api.cimclient.LcrException: CIM_ERR_FAILED: Value not allowed by VALUEMAP for property
Generally this error comes due to less version CIM level. Can you please upgrade your CIM level , please read the SAP Note 669669.
Please update if the problem will come again after upgrade.
Regards
Pranay Agarwal

Automatic GR Problem for Production Order - Missing PARTS

Hello
Stocks are available in the QA stock, The Availability check is considering this stock also, but during Production order confirmation,( CO11N) we are getting error message missing parts , we have two problem
1) we don't want to consider the different storage location / QA stock for availability check
2) Once we transfered the stock to Unrest stock , we can't do CO11N , we have to do manual GR / GI , how to overcome this.
Thanks
Ni

Hy Nick,
For your First Qustion,
For this go to OPJJ - Avaibility Check Control
Select Chcking Group which you have assign to your Order type
(OPJK) and remove tick from Incl. QI stock.And for Storage location don't tick No Storage Location after doing system will check Material availability in only production storage location (Which you have maintain in MRP - 2 view of Material Master) .
For pop up option, go to T.Code OPJK Slect your Plant , Order type and option 1 or 2 (At the time order Creation or Release).
Material Availability checks,
Don't tick No check option,
This setting will give the option of Pop up screen with Massage of Missing Parts.
For your Second Question
Sorry still I still don't under stand your Problm.
But I guess you want to restrict the GR until GI is not done due to Missing parts.Correct or not?
If yes then do the below settings,
go to t.code OPK4 (Parameters for Order Confirmation):-
Go to second tab General Individual Entry,
Tick Goods Movement selecttion and then also tick Terminate for Incorrect Goods movement.
This setting will help to terminate any confirmation for which goods movement containes any error.
Hope it will help to solve your problem.
Regards,
Dhaval

IOS 7 problems finding songs, playlist missing songs

I had a playlist that included several songs from a particular artist but since upgrading from iOS 6.1.3 I can only see one of the tracks remaining. The other songs appear to be removed and searching for missing songs/parent album/artist does not produce any results at all.
The songs are still on the iPhone and I can navigate to them, but only as follows:
Play the one surviving track from this artist/album still in my playlist.
Switch to 'now playing' to select other tracks on the album, including the missing playlist items that Music Search can't find.
It seems like an indexing problem. I'll try removing all the music and resyncing from iTunes and reply with the results. Maybe this will help someone else...
Running iOS 7.0.2 on iPhone 5 64GB. Problem has been present since iOS 7.0.0
Music ~= 20-30GB on iPhone.

Third update (sync takes hours so I can only do this once a day...)
iTunes 11.1.1 did not help.
I deleted all music on the device from Settings > Usage > Music > Edit > Delete (which, incidentally, took two attempts before it actually deleted it).
Then I performed a clean sync of my selected playlists again (about 5800 songs)
The sync completed but the iphone was still missing over 1500 songs.
I tried another sync immediately. The process stayed on 'waiting to apply changes' for about 15 minutes, then completed. A few more songs were sync'd but it was still missing 1400+ songs.
The playlist with missing songs was still missing some tracks, but different ones this time. To test if the playlist was the problem I deleted all music from the iPhone again and sync'd just two playlists, including the problematic one. It sync'd all tracks on both playlists, so it doens't appear to be the playlist that is breaking the sync.
I will try one last attempt by restoring the phone as a new device then syncing all my playlists before reapplying the backup data. If that still doesn't work then there is clearly a problem with the sync process that previously worked fine on earlier versions of iOS / iTunes.

[Solved] libpcre.so.0 missing

Hi, I recently tried to fix my git and, after determining the issue was I didn't have PCRE installed, I installed it. Well git works, but nothing else does. I can't run any programs, I always get the following error message:
geddit: error while loading shared libraries: libpcre.so.0: cannot open shared object file: No such file or directory
Any help will be appreciated.
Last edited by espior (2012-05-30 20:00:02)

Stop doing -Sy stuff, start doing -Syu stuff.
A full system update will solve your problem.
Last edited by Mr.Elendig (2012-05-30 19:40:24)

Color Problems in Lion (Colors Missing / Washed Out / Invisible)

Hello,
I recently purchased a new macbook air, and I'm loving it. I don't know if the problem im experiencing is an issue with Lion, or with the display hardware of this macbook- but colors on this display (either due to the hardware or the Lion OS) are getting really washed out. Sites that would previously look fine, now appear to be missing a lot of the colors that I know they are supposed to have.
What's even stranger, is that if I have an OSX window open above the browser/website I can actually see the correct colors by moving the top window across the screen and looking at the colors in the window just below it within the dropshadow area. Somehow the dropshadow of the upper window causes some kinda color transform magic that shows the colors as they should be, but the correct colors only appear in the "dropshadow" area. This tells me that the correct colors are there, but somehow the display or software is not displaying them correctly.
I wish I could post images to show the problem, but I know if I post any, they will just look correct on whatever display user's are viewing them through, as this problem seems to be specific to this LED display / Lion.
Look at http://snipt.org. The "New Snipt" box should appear as a light gray box with a darker 4 pixel border and a blue header. The entire box should have a dropshadow. On every other display I have used this is how it appears, and it is correct. When I view it on my MBA/Lion, all the grays and dropshadows are gone, Its basically a white page, with a blue header and some dropdown boxes. If I open an OSX window above it, the dropshadow of that window does something to the colors which reveals the grays and dropshadows on snipt.org but they are only shown in the are covered by the dropshadow of the topmost OSX window.
Has anyone else experienced this? As a web developer this makes things extremely difficult, the colors I see on this machine are inconsistent with ANY other display. Is there a way to fix this?
I can try and take a video with my iPhone to convey the issue if this description doesn't make sense. Please help me out!
Thanks
Dan

Aha! After posting this in "related posts" section on the right, I found this answer:
"Open the Universal Access pane of System Preferences, click on the Seeing tab, turn off White on Black, and drag the Contrast slider all the way to the left."
That fixed it! The colors appear correctly again! Websites actually look good instead of being entirely white!
Apple should really change this to be the default setting, rather than shipping with colors being oversaturated.
Hope this helps someone too!

Eterm intall problem - libpcre.so.0 missing

Similar Messages

Maybe you are looking for