Eth0 inactive after installation HELP HELP HELP

Hi Gurus,
I installed oracle enterprise linux “Enterprise Linux R4 update 8 (Media Pack for x86 (32 bit) on VMWARE SERVER 2.02. After installation my eth0 was inactive and i have tried to activate but it is still not active, what can i do guys to activate my eth0 .ANY SCRIPT OR WORK AROUND PLEASE HELP.After running the ifconfig, my IP address is not showing.I configured manually not dhcp
Edited by: user464343 on Oct 10, 2010 12:13 PM

u can start it manually from the gui
by typing the following as root
#system-config-network
then set the ip and dns
and save then activate
or by the command line
using the commands
#ifup eth0
#ifconfig eth0 ip/netmask

Similar Messages

Assistant NET8 and DBCA won't start after installation HELP

HEllo,
I've installed oracle 9.01 and later on 8.1.7 i cannot use the assistants net 8 and dbca after installation. Does anybody have the same problem. I think is has something to do with jre versions.
I alse got the same problem when i installed db9.0 and oracle appserver 1.2.2.2 on the same machine. SOme config assistant won't start after install.
ALready tnx.
Francus

Hello, yogendra k saini
I'd installed oracle90 and 1.2.2 in different oracle homes. There was no error message. When i pressed the icon. Nothing happens.
Yesterday i installed also a 8.1.7 database on the same machine as the 9.0.1.4 database. After a reinstallation of appserv 1.2.2a everything seems to work fine.
but it is still a mystery for me why, because when i only install a 9.0.1.4 database and appserv 1.2.2.2 something goes wrong. Maybe APpserv 1.2.2. doesn't work fine with 9.0 database. That's not exactly true because i used appserv 1.2.2 for forms en reports...
gr.
Francus

Cannot launch PSE 6 for Mac after installation - HELP!!!

I just installed PSE 6.0 for Mac on my new iMac (I'm using OS X 10.5.8), and it installed successfully (at least it appeared to). My first problem was that it did not allow me to register the serial number. That's probably no big deal, but then when I went to start the application, the main window came up, but it did not let me do anything, not even EXIT (it was grayed-out). I shutdown and restarted, but this didn't change anything. I thought PSE 6.0 for Mac would work with OS X 10.5.8? Not sure what's going on here. And why aren't there any error messages telling me what's wrong??? I'm on hold right now to Adobe, but nobody is answering. Very frustrating ...

I just did a 'verify permissions' and it returned 117 messages that said "permissions differ on ... ". Then I did a 'permissions repair', but it did not seem to repair anything because the same "permissions differ on ... " messages came back. It also said "Permissions repair complete", so I don't really know what that means (successful or not??). Below are two examples of the 'error' messages:
1) Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2) Permissions differ on "System/Library/PrivateFrameworks/DotMacSyncManager.framework/Versions/A/Resources/DotMac SyncHelper.app/Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
What does the permission "l" mean in #1?
Most of the returned messages are similar to #2 ( ... should be ? ---- ...). Not sure if this is okay.

I have installed ios7 on my iPad 4. After installation it asked me pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6.

I have installed ios7 on my iPad 4. After installation it asked me a pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6. I asked Apple store & tech said to format it but I will lose all the data..!

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

Firefox will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

Can you attach a screenshot or link to the instructions you are following?
You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

Hi mujabee1111,
Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
Download CS5 products
Regards,
Sheena

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. I anyone able to give me a hint how to handle it? Thank you ind advance Karl

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. Is anyone able to give me a hint how to handle it?
Thank you in advance
arl

Hi Keith, sorry for my late reply.
Surely I am able to connect to the help function when Icontact the website
of AdobeLR5.The problem is as follows,
When I open LR5 on my computer and work with it and try to open the help
function in the software, I don't get it.
When I bought the CD I was naiv enough to believe that I get an independent
working software. I learned in the meantime, that the seller does not allow
to work with, without being connected to them.
I don't believe that I am paranoid, but I like to buy something and use it
without to inform the supplier that I do it. Otherwise I could have bought
the license fpr LR5 via internet.
Best regards
Karl
2015-01-02 13:42 GMT+01:00 kglad <[email protected]>:
I bought a cd with Lightroom 5. After installation and registration I
am not able to use 'help' function and I cannot update the software. I
anyone able to give me a hint how to handle it? Thank you ind advance Karl
kglad <https://forums.adobe.com/people/kglad?et=watches.email.outcome>
marked Keith_Reeder
<https://forums.adobe.com/people/Keith_Reeder?et=watches.email.outcome>'s
reply on I bought a cd with Lightroom 5. After installation and
registration I am not able to use 'help' function and I cannot update the
software. I anyone able to give me a hint how to handle it? Thank you ind
advance Karl
<https://forums.adobe.com/thread/1669640?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/7059196?et=watches.email.outcome#7059196>

Can't use iworks9.0 after installation... HELP SOS!

i just buy the iworks9.0, but can't use after installation, i ask the technical that because of i download the iworks trial version and update OSX10.6.8 before...
the technician said that i should reinstall the OS from boxset can fixed, but everything need back up...
can anyone help with another method except reinstall the OS, OMG
thx all imac fans... can anyone give me a big hand?

Understandable, but it also says "Intel"...... actually, as far as I remember, iWork came about when Mac went Intel replacing Appleworks which is PowerPC only.
Now, back to the actual problem.....
I've never had the trial versions, so i can't address that problem specifically. I have always used the retail versions (DVD in a box). But, I am guessing that there was a problem because you had the trial version installed and then tried to install from the DVD again. You see, the trial version is a full version except it will only act like a full version if you enter a registration code. The new version (09) does not require a code.
If you cannot delete the applications, then reinstalling the OS from scratch is the next best idea. That means erasing your hard drive which is why tech support said you need to make a backup first so you don't lose your files. It also means you must have your install disk. After that, if those trial versions still show up, I would delete them BEFORE opening them (right after the new install) and then try to install from the DVD again.

I need help w/ This: missing gina dll after installation...

I need help w/ This: missing gina dll after installation of linksys adaptor on Win XP.
Thank you

I assume you are facing this error on wireless USB adapter ... WUSB54GC .... uninstall the adapter from all programs >> unplug & replug the adapter >> Install the drivers using found new hardware >>
Once installed use windows wireless configuration to connect to the wireless network .....
See if it works .....

I lost my bluetooth after installation of Maverick2. Can anyone help me please, i cannot use my magic mouse on my Mac Book Pro retina???

I lost my bluetooth after installation of Maverick2. Can anyone help me please, i cannot use my magic mouse on my Mac Book Pro retina???

There is a fix; I finally discovered how to clear the Windows 7 xx64 Device Manager's warning of a missing Bluetooth Peripheral device.
Thinking Boot Camp 4.0 would correct thid, I installed it ititially today only to have the warning remain.
The Bluetooth company called Broadcom (you notice the reference during the installation of Boot Camp) offers a BlueTooth "device finder" (my phraseology) that detects all BlueTooth devices in your Apple or PC but withing a Windows operating system; included are Windows 7 , Vista, XP and even 2000 operating systems.
So download the 3 MB file, from Broadcom.com. While your Bluetooth equipment is plugged in to the computer, run the program. The program searches for any BlueTooth peripheral activated equipment and BlueTooth devices that makeup your MacBook Pro, or other Apple or a plain PC computer having a Windows operating system installed. It then downloads the appropriate software required.
The company's URL address:
http://www.broadcom.com/support/bluetooth/update.php
In my case, I ran the program, rebooted my MacBook Pro (in Windows 7 x64 and with the new Boot Camp 4.0 installed) and the missing BlueTooth peripheral device indication was eliminated. It took 10 minutes to complete.

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
Hope this helps.
Ben

I downloaded upgrade for LR. After installation, ALL my pictures were gone!!!!! What the hell??? HELP, please.

I downloaded upgrade for LR 5 on my MAC. After installation, I opened LR and all my pictures were gone??? What has happened? Thanks.

If problem not due to opening wrong catalog, then there is likely some other simple explanation, like you are looking in the wrong place or have a filter set wrong or something.
If you don't figure it out soon, consider posting back with more details and maybe a screenshot or two..
~R.

Won't restart successfully after Tiger installation --- Help!

Howdy!
I'm finally updating to OS X from 9.2.2. Everything was humming along smoothly with the installation. My computer restarted after installation, but then hung for quite a while on the grey apple screen with the twirlygig at the bottom of the screen, and then, horror of all horrors, a big circle with a slash replaced the apple... and there it stays. I have to manually reboot the machine to get it to restart to either the old 9.2 partition or from the 10.4.3 installation DVD.
From the Tiger DVD, I've verified and repaired the disk and permission (if didn't come up with any errors, but I repaired it anyway).
I've re-installed the OS with all devices except the keyboard unplugged -- nothing changed.
Any ideas?
I'm trying to install it onto a 120 GB Maxtor internal drive that has not given me any problems in the past. The hd is partitioned for a 9 and X OS... I also still have the original 20 GB internal hd installed.
Should I try removing RAM that was added years ago? Or installing it onto the original 20 GB hd? Or will I have to try an Erase and Install? Will this option just erase the partition set up for OS X, or will it erase the entire hard disk?
Thanks for any assistance.
-Jenn
G4 AGP 450 MHz Mac OS 9.2.x 856 RAM

I'm actually unsure if the version of Disk Utility on the Tiger Install disc can do an erase and install on one partition of a partitioned hard drive or if the erase and install wipes the entire HD; I'll have to check into that when I can. There was in the past a known issue where OS X had to be installed on the first partition of a partitioned HD; I believe that's no longer true, but the default at startup for OS X is to look for the OS X System on the first partition (if you hold the 'x' key down at startup to boot into OS X, that's the expected location). If the OS 9 partition is the first partition, that may be throwing the OS X Install restart off. You might check to see if using Startup Manager to select the second partition works. I'd also rename the partition from "OS X" to somethhing else (say "OSTen"), just to be safe.

Mac Pro will not restart after installation of Lion. Help!

Mac Pro will not restart after installation of Lion. Help

Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Please help me with Powershell Script - Message Box to display after Installation

Hi Guys,
Am using package model to deploy the software. After installation on client machines i want to display a dialog box to notify the successful installation.
Currently trying VBScript to show the dialog message.
But few machines i get this dialog and few machines am not getting, in program command line am calling a batch script.
Now am planning to use a Power shell scripting to show a message box and trying to call it through a batch script.
Please assist me with the powershell script which will display a message box like above
(and let me know in script how to enable the set-execution policy Remote signed enabled)
Thanks,

You can set the execution settings from within the client settings.
For a simple message box without having to load assmemblies
$wshell = New-Object -ComObject Wscript.Shell
$wshell.Popup("Operation Completed",0,"Done",0x1)

Eth0 inactive after installation HELP HELP HELP

Similar Messages

Maybe you are looking for