Ethernet active but not working - Airport works perfect

Dear all,
I have a very strange problem with my iMac.
One hour ago internet was working perfectly while being connected via ethernet cable.
Now it does not anymore.
General Settings - Network
The led of the ethernet is green when IPv4 configured manually - but internet does NOT work!!!
The led of the ethernet is green when IPv4 configured DHCP - and internet works!!!
In both settings then only thing that changes is the IP address, i.e.:
Manually I have to configure it as 192.168.1.21
With DHCP the IP is 192.168.1.160
I have read lots of discussions and tried the following:
Tested cable with LAN tester - fine
Tested switch / router / other computers connectivity via ethernet - fine
Tested connectivity on my computer using Airport and it works fine
Reset the SMC
Set service order Ethernet (top), then Wi-Fi
Launched terminal command netstat with following result
Name Mtu   Network       Address            Ipkts Ierrs    Opkts Oerrs Coll
en0   1500 <Link#4>    34:15:9e:36:b6:16     1040     0     7489     0     0
en0   1500 brs-server. fe80:4::3615:9eff     1040     -     7489     -     -
en0   1500 192.168.1     192.168.1.21        1040     -     7489     -     -
Please HELP!!!

Yes I can and I've done it.
But it is when I do that, Internet stops working.
I checked IP, subnet, gateway, DNS... all is correct but internet does not work, although the "led" into ethernet connection of the network settings is green!

Similar Messages

IMessage is activated but not working

hi, i have always had issues with imessage back when i first got my iphone in 2010. It had always been a simple error like i needed internet to activate or i needed to reset all my settings but then i upgraded to ios 7 and things got progressivly worse. My iMessage is activated and so is my FaceTime. I only have it set up to have my number enabled becuase when i enable sending to my appleID it will break. other people that have an iphone with iMessage enabled see that i have imessage and their texts to me automatically convert to imessages. however, i cant recieve these imessages or send them to anyone who has an iphone with imessage enabled. i have tried factory reseting it and reseting the network settings and hard reseting it but nothing works. Please help.

iOS: Using Messages
iOS: Troubleshooting Messages

My ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later

Active state not working in scrolling site (with anchor links)

I'm design a scrolling site with anchor links and an horizontal menu on the top.
when i publish the site and click on the menu buttons the site scrolling to the place of the anchor but the active state in the menu is not working.
now... when i leave the main page (were the scrolling site is) and then return back to it all active states are working perfectly
anyone have this bug? or any one know how to fix it ?

Hmmm...I've just been playing around, and I think I got the Active State to work correctly. I think my problem was not understand what Active State means.
To answer your question, I was changing the Font Color and Box Fill Color of the Active State.
I did not understand that Active State means the look of the Menu Item when the PAGE is active. I thought it meant the look of the Menu item when the cursor is scrolling down the Menu (i.e. when the MENU is Active, not the page).
Look at this page for an example of what I'm trying to achieve...
http://www.pgavdestinations.com
When you hover over the "Work" menu item, and move the cursor down the menu, the state of "Work" remains changed until you move the cursor off of that menu column. It does NOT return back to it's Normal state until you are off of that menu column.
Is there a way to achieve this with the menu states in Muse?
Thanks for the replies!
Dave.

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
Airport gets it address DHCP.

Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
Note that the Express will not provide any additional wireless coverage when it "Joins".

Pick activity is not working properly while creating two or more file adapt

Hi,
pick activity is not working properly while creating two or more file adapter for bpel process.
bpel process compiled and deployed succesfully but while observing the wsdl file of deployed process you can find only one file adapter. so it polls only from that location.
can anybody help on over this? or it's limitation of jdev to use only one file adapter at time while using Pick.
Thanks
sagar

Does anybody tried this?
Thanks
sagar

Page is working ok in chrome and IE but not working in firefox. jquery problem i guess

http://184.170.251.149/raschet-shkafa-kupe
this page is working correctly in chrome and IE but not working in firefox, i cant click and of the dropdown menus(ДСП, доличество дверей). it was working perfectly prior firefox 18. can you please fix the compatibility problem ?

I was referring to the second page in my above post.
I disabled JavaScript as a test after loading the page with JavaScript enabled and that worked.<br />
I also get the selects to open if I right-click instead of left-click the select.<br />
That way the select get selected (shows a focus ring) and after that left-clicking works as well .
This assumes that JavaScript is monitoring the left-click, but that script no longer works properly.
A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

Do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use laptop. is there problem between apple and FB?

do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use my laptop(non-apple). is there problem between apple and FB?

Facebook apparently has their site coded poorly for tablets with touch screens. Try using the Facebook app. It is not perfect either but it is better than view in a browser lately.

Hierarchical Tree: When-Tree-Node-Activated is not working

I'm working Forms 10G rel.2.1 and also using application server 10G 2.
my problem is in Hierarchical Tree [When-Tree-Node-Activated] is not working in Enter this is working in Enter+Tab
I want to this trigger is working in only Enter.
I'm waiting quick response

node_value is only item which have transfer the form or report name
Trigger Name : WHEN-TREE-NODE-ACTIVATED
Declare
     htree                Item ;
Begin
     --clear_values;
--           htree := Find_Item('tree.htree');
-- Find the value of the node clicked on.
:node_value := ftree.Get_Tree_Node_Property(htree, :SYSTEM.trigger_NODE, Ftree.NODE_VALUE);
----Above node value transfer the procedure and call the form with node_value(Form Name)
     Execute_CMD_PROC;
Exception
     When Others Then Null;
End ;
when i enter then no value but when i enter+tab then show the form

Windows Server 2008 x64 on Bootcamp: Ethernet drivers missing/not working

Hello folks,
at the moment I try to get Windows Server 2008 x64 running on a new Mac Pro (Early 2009).
Installation of Windows Server 2008 x64 (Enterprise) worked out of the box. However, the ethernet drivers do not work. Ethernet cards are not detected and working due to missing drivers.
I have tried several different Intel driver packages. All of them report "No intel card found.". However, the vendor ID of the ethernet card clearly points to Intel.
I have not been able to find a driver yet, does anyone have an idea?
E.g. does someone know the exact chip name? The driver "name"? Anything else?
Thank you in advance,
Stefan

Erik - Thanks for the info!
I use 64-bit applications ... some notes on why:
enterprise supports up to 32GB of memory so the argument to use x64 for memory support is nullified.
... that's not correct. x64 windows versions allow 64-bit addressing, so 64-bit applications created for x64 windows can take advantage of large amounts of cheap RAM as 32-bit applications cannot. 32-bit applications (they are all 32-bit applications in a 32-bit Windows version, even in Server 2008) are restricted to a limited process space of at most 2 GB.
It's true there is a LARGEADDRESSAWARE kludge to enable limited use of up to 3 GB by a user process (and there is an equivalent to this in Server 2008), but this has gone nowhere because it is far more straightforward and more productive for an applications developer to simply go 64-bit rather than invest any engineering resources into a one-of-a-kind kludge for an era that is already past.
Yes, it is true that if you are stuck running 32-bit applications you have less incentive to use x64 windows. But going true 64-bit is a huge advantage in reliability and performance. Given the very low cost of RAM in modern times it makes sense to do so, even in notebook settings that are often limited to only 4 GB of RAM. 64-bit applications in Windows tend to have decisive performance and reliability advantages so whenever one competitor in a given segment makes the jump to 64-bit pretty much all of them must do so.

Mysites Activity feed not working

Hi,
I have restored Mysite Content database.After restoring it, Profile pictures coming correctly but activity feed and trending tags not working(coming blank).
After restore db i did following:
IIS reset
Server reboot
Mysite setup settings(activity feed enabled)
Alernate access mapping.
Still activity feed not working.Please suggest.

Hello
Have you checked the timer job ?
http://technet.microsoft.com/en-us/library/hh344225(v=office.15).aspx
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

HT2188 iPad 1 requested activation after being low on power. Activation does not work.

Hi
My iPad 1 requested activation after being low on power. Activation does not work so I have tried to restore it from iTunes. this progresses but after rebooting, it gets to the activation process for a few minutes and re-boots again - in a loop now. on ios6, not 7. help please?
I also looked at trying to do a manual install of firmware via iTunes but I do not know the version of firmware or how to find it out - so really stuck!
Thanks

I pulled my unit out of the dock - powered up and the display goes blank (if you look carefully you can see the bios boot screen, then black, then you can see the backlight turn off.
I plugged in the USB monitor and boom - I could log in.
Once Logged in I could see that windows still thinks it has some of the monitors from the dock, and the internal display is set to disable.
So the issue is the detection / setup of monitors in/out of the dock.
I've done about all I can do for dubugging, I hope lenovo can pick up from here. if not I'll have to call lenovo support.

The apple keyboard is not work perfect on windows 7 (*not apple machine)

I use the slim keyboard which made 2009 before. but it's not work perfectly sometime.
it will be keeping input like the key is still press. who could tell me why?

I use the slim keyboard which made 2009 before. but it's not work perfectly sometime.
it will be keeping input like the key is still press. who could tell me why?

HT201303 Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Ethernet active but not working - Airport works perfect

Similar Messages

Maybe you are looking for