Ethernet and wifi not working on g6 1318ax

Sir, my laptop is HP g6 1318ax. When I buy this lap I installed windows 7 but now format it and installed windows 8. But after installing the windows 8 the ethernet port and wifi not working. I download and install hp recommend drivers for win8 but it is not working. Please help me to solve this problem.

Hi: Below are the links to the PCI and touchpad drivers. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110518-1&cc=us&dlc=en&lc=en&os=4132&product=5278311&sw_lang= http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110512-1&cc=us&dlc=en&lc=en&os=4132&product=5278311&sw_lang= Unfortunately, I don't know why the wired network adapter isn't working. I'll give this one more try and if this driver doesn't work, then I don't have any idea why. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-110949-1

Similar Messages

Ethernet and WiFi not working in browsers

We have about 13 iMacs and 3 MacBooks connected to our LAN network. Earlier this afternoon, one of our iMacs (20 inch early 2008) would not connect to Firefox or Safari internet browsers. However, I was able to log into our practice management system, which requires an internet connection. I went into System Preferences and ran a diagnostic test on the network which didn't show anything. I even turned the WiFi on and connected to our wireless network and could not connect on Safari and Firefox. I took one of our MacBook Airs and connected hooked it up to the ethernet cable used on the iMac that wouldn't connect and it worked without issue. I checked our Netgear switch, all cords are securely connected and everything is light up as it should be. Just wanted to see if anyone had any other suggestions before I called either the company who set up our network (who rarely return my calls) or take it in to be serviced (closest place is about an hour away).

Why not try a Repair Disk?
Boot to the Recovery partition, run Disk Utility and have it Repair Disk.
http://www.apple.com/osx/recovery/

I buy a new compaq presario cq57 408tu but its bluetooth and wifi not working even installing driver

i buy a new compaq presario cq57 408tu laptop , but its bluetooth and wifi not working even installing all driver

Hey there. You didnt state what operating system you are using but I was able to find two articles that should help resolve your issue.
Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
Fixing Bluetooth Issues
These articles will go through all the basic troubleshooting steps. Let me know if this helps resolve the issue at all.
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Network controller& USB controller driver not found and wifi not working

hello I Purchased HP 15-ac025TX (M9V00PA) Notebook laptop . i have installed all driver from HP site here is the link  http://support.hp.com/in-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8326084#Z7_3054ICK0KGTE30AQO5O3KA30R1  but still netwok controller driver not found also wifi not working i installed blutooth drivers too . I am using window 7 sp1 (32 bit) For network controller device ID is PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 secondly univeral serial bus driver(usb) controller not found i installed all drivers from above link also update windows but still no solution hardware id of usb controller is PCI\VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03  and last i am unable to download AMD/Intel Switchable High-Definition (HD) Graphics Driver. the download link not working KINDLY RESOLVE THE ISSUE THANK YOU

Update: While the driver I knew would work has not shown up yet, I did some detective work and explored some other broadcom wireless card driver folders from some HP links, and I found one that should work for you. While it says it is for HP desktop PC's, they put the exact same wireless card form factor in a desktop PC that they do in a notebook PC. I see no reason why this driver would not work, since the setup information file contains the same hardware ID that you posted. Here is a partial copy and paste of the driver setup information file and you can see the hardware ID you posted is supported by this driver.  x86 - Win7
[BROADCOM.NTx86.6.1]
    %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C
    %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D3103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2232103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D4103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_149257_1

IPhone 4s Getting Hot for no reason and wifi not working help?

The otherday my phone was in my pocket and I could feel it getting hot, so I pulled it out of my pocket and noticed it was a lot hotter than it should be, after noticing this I noticed that my wifi was not connected so I checked SETTINGS<WIFI and there was no connections, the little icon just kept spinning and spinning, so then I toggeled it off and on, no luck, turn airplane mode on and off still no luck, I even toggled of my mobile data no luck.
I preformed a reboot, (held both lock and home button together) and checked again, NOTHING.
I then turnt it off for 10 mins ( held lock button slid red icon across) and the phone got colder and then the wifi started working again.
then last night it did it again, I have taken the phone out of its case and changed the charger(just incase these were affected it), I then tried everything again, it helped but not for long, tonight it has done the same thing so I thought nothing of it, il just do what I had previously done,
BUT NO! not even resetting network settings helped, neither did erasing all data, neither did placing the phone into restore mode, restoring via itunes and then setting the phone up as new, just incase the backups contained software glitches causing the wifi not to work.
I have been screen shotting the phone in and out of charge showing no wifi connections are showing for proof for when I take it to the apple store thursday (everyother day was fully booked).
Being that my phone still is covered by apple care, Ive got proof that it is defective/tempermental(incase it starts working again and then stops) and obviously they can have a look at it, take it apart or whatever i dont care I want it fixed! but will they replace it?(the whole phone) and also will it be for free as ive still got apple care warrenty and it is hardware problems?
ALSO i never had any problems with 5.1.1 so I hope if i get a replacment it will be 5.1.1 as I wont update until 6.0.1 is stable enough

*also, i have just reset all settings again and my wifi connections have appeared! this is taking the P*** now apple sort it out!

Bluetooth and wifi not working

my wifi and blue tooth is not working and i could not turn on my bluetooth , i tried reinstalling my drivers ,went to change pc setting and tried to turn on my blutooth bt its not happening. i tried to restore my system to earlier point then also it didnt worked,please help me asap .

Hello , Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you are having an issue with your WiFi/Bluetooth, and wanted to assist you! Please review the following documents, as they may help to resolve the issue for you:HP PCs - Troubleshooting Wireless Network and Internet (Windows 8)HP PCs - Understanding and troubleshooting Bluetooth wireless technology (Windows 8.1, 8, 7, Vista, XP)HP Pavilion and ENVY Notebook PCs - PC Does Not Connect to Wireless Network and Yellow Icon Next to Bluetooth Device in Device Manager (Microsoft Windows 7, 8, and 8.1) Please let me know if this information was helpful by clicking the thumbs up below.
Have a great day!

HT1695 Bluetooth and wifi not working

Hi all
I have an iPod touch and for some reason the wifi and Bluetooth has stopped working, I have done a full restore and reset the network setting but to no avail. For reference my iPad and iPhones are working perfectly, the software is up to date. Any body found a solution to this?

Is this the problem?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If so it is frequently a hardware problem an an appointment at the Genius Bar of an Apple store is in order.

Help Please! Genius AND WiFi not working on iPod

Hi, I'm using a first gen touch on the latest firmware. even though i have genius on iTunes, it will not transfer onto the iPod. There simply is no genius button. How can I get this working?
Also, on an unrelated note, my WiFi is completely shot. The little scroll thing will pop up for about a second than disappear, even in places where ive been using the WiFi for as long as I've had the iPod, which is about one year! I've never had any problems with the WiFi until I upgraded to 2.0 and above, does anyone know any solutions? I've reset the settings and network settings, and neither of these worked. Any help?
Any help would be appreciated!!
Message was edited by: romeboards

reset your network connection. I think it's under general settings. Same thing happened to me, and that fixed it

Photosmart C6180 Wired and Wifi not working together

I recently reinitialized my Photosmart C6180 all in one. Since then I can either use it wired or wireless, but not both at the same time as was the case before. Wireless printing works fine when I unplug the network cable. Once I plug it again, it stops printing wirelessly.
The printer name on the network is HPC61890. I can see it assigned an IP address in my router for both the wired card (.34) and wireless radio (.35). The IP for wireless can only be pinged when the cable is unplugged.
Any idea how to fix this?

Hi Danyk,
I would like to help you with your connection issues. You can connect your printer wireless (on a network) and via USB. But you cannot connect wireless and wired (ethernet). Once the ethernet is plugged in it automatically turns off the wireless.
If you could tell me what operating system you are running I can send a link for the up-to-date software and drivers.
Thank you,
I worked on behalf of HP.

TS1398 Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation sam

Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice

Have you tried a simple reset of your iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in.

Installed iOS7 update and now wifi and Bluetooth not working

My daughters 4s has never skipped a beat - perfectly reliable. Just updated iOS7 with update and now both wifi and Bluetooth not working. Wifi is greyed out and when you go into bluetooth the busy twirly symbol is constantly going round. Can someone please help me as I'm pulling my hair out! My other Daughters iphone 4s is fins BUT she has not downloaded latest update - and she won't until this is resolved. If needs be I will take to store and DEMAND for it to be sorted out - either by repair or replacement as it is wholly a seemingly software issue and nothing wrong with the phone.
Gutted really as I am a huge Apple fan and customer with ipods, phones, iMac & iPads all around. If this is not resolved I fear an Apple drought may begin!

..... ty for the link, however this is the first result googling the issue..... of course it did not work....
it is really unbelivable that plenty 4s devices suffered the wifi troubleshooting just after upgrading to ios7, and finally.... i should burn wifi and bluthoot, and another hardware problems should cause % battery value is disappeared....
all this in one shot....
firmaware is not well working or is somebody bombing our devices to force us to switch to newest?

Macbook wifi not working all of a sudden

So while doing a fresh install of ML on my unibody MB I ran into a snag just a few moments ago. Everything installed no problem, I updated to 10.8.1 yesterday and all was well. Today I installed a few other apps (skype, iLife 09) with iLife requiring a reboot. Once rebooted I was unable to get a wifi signal.
At first the little icon at the top bar was blank indicating wifi was turned off. I selected turn wifi ON and it now says looking for networks and after a few moments it fills the blank icon with grayed out lines, yet it never finds a network to connect to, just keeps looking. In system prefereces/network the wifi status shows to be OFF. Pressing "turn wifi on" next to the status does nothing. The button lights up blue when pressing it but it has no effect on the network status. Network Name shows a grayed out "Wi-Fi Off". I have done several re-boots and several shut downs and battery removals all without solving the issue. Using network diagnostic does not turn the wifi on either, just gets stuck on scanning. Connecting an ethernet cable gets me online no problem.
My other mobile devices indicate that my wifi network is alive and well. This led to me to think that perhaps the hardware crapped out, which would be strange that it did that all of a sudden. So I took the hard drive out and put it my SSD that resided in my MB until a few days ago (with everything still intact on the drive). Booted up and wifi is working fine. The only difference is that the SSD is running 10.8. I was thinking of updating it to 10.8.1 to see if that kills the wifi but I did the update on the other drive yesterday and had no problems with it after a reboot. The problem started today after the skype and iLife install and reboot. In other words the MB ran 10.8.1 fine for 24 hrs and I find it strange that iLife or Skype would cause this issue but that is when the problem started, so I'm stumped.
Is there a way to force wifi to turn on in terminal? Or any other suggestions? Anyway to go back to 10.8 or do I have to re-install everything from scratch?
Thanks, Mark

Please disregard this thread. Although I did a search before posting, I did not find what I was looking for at the time. I have since found the appropriate thread here https://discussions.apple.com/thread/3196661?start=270&tstart=0

Problems with ethernet and wifi after 10.5.8

In school we log online through a system where a window appears in Safari (or other web browser) where you write in your username and password. Same is for Ethernet and Wifi. After update 10.5.8, this system no longer works. Only logo of the service provider appears but the boxes for username and password are missing.
Everything works with my old iBook G4.
Any ideas?

My son is at school in the USA and he is reporting the same problem getting onto his university network. His new MacBook is getting the 'self-assigned IP' message with DHCP. This is not a good start to the school year.

Using ethernet and wifi at same time

I just upgraded to Lion and now I can not access my WIFI print server at the same time I am connected to the ethernet using the wired cable. In Lepard it worked fine. To clarify, I use the ethernet cable for internet access and I use WIFI to print and access a network hard drive. When WIFI is off, the internet works fine, the moment I turn on the WIFI, the internet sonnections stops. Since October 2010, this connection has worked fine until Lion. I have a second IMac on Lepard and it also still works fine with both ethernet and wifi at the same time.

Try to swipe up and press play from control centre while in your game. This often works however with some games/app the developers have set to pause your music and after you swipe away control centre the music will stop.
Hope this helps!

Ethernet and wifi not working on g6 1318ax

Similar Messages

Maybe you are looking for