Ethernet Cable HELP PLZ
I have a Macbook Air 2.13ghz and I wanted to transfer movies from my Windows Computer to it. Can I use any of these: Ethernet straight-thru cable & Ethernet crossover cable
This may also help a little reference a crossover or straight through:
http://support.apple.com/kb/HT2274
I have always used the basic premise of a straight through is primarily used for hooking up between networks and different types of equipment whereas a
crossover cable is to hook up between two computers direct. That has changed a little in that today some devices, such as newer hubs, don't care which type it is.
Hint. Don't expect the salesperson to know the difference between the two. I always keep at least one of each on hand.
Similar Messages
-
No remote for Apple TV and its never been in my network will an Ethernet cable help
My second hand Apple TV has no remote, therefor I know I can't get to the settings to find a network using the remote app because it is new but can I get an Ethernet cable, plug it in to the router and then use my phone?
I have just got hold of an ethernet cable, the Atv automatically went onto the network without having to navigate through any of the options but the only functionality available seems to be airplay from my mac or phone.
-
Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.
Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
Hmm, ideas anyone?
SBB -
I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?
m1doc,
Are you migrating from a Mac or a MS Window machine? Either way you probably should be in touch with AppleCare, you have 90 days of free AppleCare telephone support. They can usually help on issues like this. If you don't know the phone number please use http://support.apple.com/kb/HE57 to help find the number in your country. -
I have just bought an airport express to connect to the Ethernet cable in my cabin. It's all set up all lights green and I've set up my wifi connection. But when I try to connect my I pad 3 or my iPhone 4 it finds the network but cannot seem to join it. Can anyone help?
Hello Lucy:
As I am not on the ship, I am "fishing" to see if I am able to help.
On the ships (cruise type) I have been on, there is usually a secure "ship" wi-fi network (as well as one that passengers may use for a fee) that needs a password to join.
On your iPad, go to settings and then tap Wi-Fi. What network are you connected to?
When you plugged in your Airport Express, you should have been prompted for settings...including security.
Barry -
Help! pc to new iMac - HDD not 'seen' on pc... ethernet cable issue too!
Hi all
I just got my new iMac a few days ago and I've tried the ethernet cable and my mac can see the folders on the pc but wont open them! (the original item cannot be found)
my ethernet cable isn't linked to the mac now but I can still see my computer in finder... both have the wireless going.. how do I 'choose' the ethernet cable.. maybe that's why it's not working?
I've now got a western digital Studio edition 500mb external harddrive - I've plugged that into the mac and all is well... I was hoping I could then plug it into the pc and drag all the files over (65gigs) and then I can transfer them to the mac.
I've used the usb cable on the pc (doesn't have firewire) and the pc does nothing!
I can't see it and I've tried clicking on the removable disc drives but it says there's nothing connected.
I know that the HDD is formatted for macs but if I format it for pcs then will I have the issue of transferring the files to the mac after?
I'm totally confused and this is driving me nuts!
the only other option I have left is to burn billions of dvds with my images and music. sob I really don't want to do that!
I would like to be able to sync my ipod and iphone to the mac and not qet my music wiped! and to get my old crappy pc off my desk.
someone heeeeeeellllllpppp please... will be very happy to get this sorted! my poor little old brain is fried!Thank you!
I literally just got the same info from a friend (he was away for most of the weekend) and I'm now in the process of copying the pc stuff onto the hard drive (after formatting)
transferred one pic and tried transferring it the mac and it worked... YAY!
so now back to transferring everything from the pc to the HDD now... gonna take a while but at least now I'm on the way off getting rid of the pc
Thanks for your help and response.
(very relieved!) -
At the moment i'm using my macbook pro with an ethernet cable = where i'm now i don't have wi-fi -> now i'm trying to do a wi-fi hotspot for my iphone through my macbook pro, but it's doesn't work - please help me!
Theres almost a trick to it for first time users, goto SETTINGS...General......Cellular (if Verizon) ....Personal Hotspot, turn it on.....turn on wifi on your Mac, select your Iphone. Enter password.
If you take too long doing it, youll need turn turn off and on real quick the "personal hotspot" slider on the Phone.......then go quick again thur the Mac. -
Question
Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!! -
I used migration assistant and my ethernet cable to move data and apps from my 5-yr old Intel-based iMac to my brand new Intel-based iMac running OS Lion. The old machine was running OS 10.5.8. Not all my files transferred (or I can't find them). I've seen recommendations to select the old computer in System Preferences, but that didn't work. Help. Thanks!
IMO, wrong choice. Start over, using a FireWire cable and following the steps in Pondini's Setup New Mac guide.
-
Help! New iMac won't recognize ethernet cable and can't check it
I just unboxed my new iMac and can't get on the internet (I'm on my powerbook). The problem is this; in Network, it says "The cable for Built-In Ethernet is not plugged in." Only, it is. Can't be the cable b/c that's the cable I'm connected with right now. So, I go through "assist me" and when I click on "Assistant" it takes me to the Intro page where I'm supposed to give a Location Name. I do this, calling it "home." The ver next screen, after clicking "continue" takes me to "How do you connect to the internet?" The problem here is that, of the 5 options, only one is selectable. Airport is the only one that can be selected?? "I use a telephone modem to dial my ISP" as well as "DSL Modem/Cable/Lan" are all greyed out..they cannot be selected. I use an ethernet cable. Why is this not able to be selected? It's very frustrating. I've turned off Airport and Bluetooth, yet I still cannot check any of these. I need to check "I use a cable modem to dial my ISP" but I can't b/c it won't allow me. Can anyone help me here? I can't use my brand new iMac and it's kind of a bummer. I thought these things were plug and play? Thanks.
I went and checked logs. Now, I'm not exactly sure what it means, but this is what it shows in the console.log:
Mac OS X Version 10.4.10 (Build 8R2218)
2007-09-28 08:15:33 _0400
2007-09-28 08:15:34 SytemUIServier [80] lang is:en
Sep 28 08:15:43 cory/System/Lybrary/CoreServices/mcxd.app/Contents/MacOS/mcxd:
MCXD.initializeDirectoryServices: Unabe to get the ethernet address
So, I'm curious about that last line. I'm completely stumped. I'm going to have to call apple care. I plan to speak with my IT guy who installed my SW to see if there's any pref's or something that my agency puts on the agency computers that would maybe be doing this. He said he'd be doing a "build" on my machine so that I had that same software I have at work, so I could work from home. Don't know how that could cancel out my ability to select Ethernet in my Network Port Configurations, but who knows.
I'm just bummed I have a new computer and can't get it up and running. -
Help connecting 2TB Time Capsule to iMac via ethernet cable only
I have an iMac running OS X Version 10.9.3, and a 2 TB Time Capsule, which at our last residence I used both as my wireless router and Time Machine backup (via wi-fi). We recently moved and got Comcast, which provided us with a very, very fast router. As a result, I would like to start using the Time Capsule only as a Time Machine backup, preferably via an ethernet cable connection. I tried connecting the Time Capsule to the iMac via an ethernet cable with no joy. When I did, it seemed to bring back my old wireless network, which I don't want. Any help/advice would be greatly appreciated!
Is it something specific about the Comcast modem/router that makes it so I have to plug an ethernet cable into it too (as opposed to just running an ethernet cable directly from my iMac to the Time Capsule, which is what I assumed was possible and was hoping to do)?
Nothing specific about the Comcast modem/router, but definitely something specific about the Time Capsule in that it needs to connect to the Comcast modem/router over a wired connection to allow backups to occur over the Comcast wireless network. As we have said, the Time Capsule must connect to the Comcast modem/router using an Ethernet cable, as you see illustrated in the TC Setup Guide.
This solution doesn't really work, as our computer/TC is upstairs and the Comcast modem/router is downstairs.
Ethernet cabling can be run 300+ feet, or about 100 meters with virtually no signal loss, so you should be able to locate the Time Capsule anywhere that you want. My Time Capsule is located in a closet, about 60-70 feet away from the main router.
is there a way that I can use the TC as an upstairs wifi extender and still do my Time Machine back-ups wirelessly?
Yes. When the TC connects to the Comcast modem/router using an Ethernet connection, you could use the wireless capability of the TC to create a wireless network with the same wireless network name and password as the Comcast network. Then, you will have the same network upstairs and downstairs with much greater range.
You will be able to backup to the TC using wireless....or, if you prefer a much faster connection....connect an Ethernet cable from your Mac to one of the LAN <--> ports on the TC.
For example, let's say that you are making the first backup from your Mac to the TC when everything on the Mac is copied over to the TC. Typically, this might take 8-10 hours on average using wireless, but Ethernet would require only about 2-3 hours.
Once you have the first complete backup done, you could then perform subsequent backups over wireless, since these will only take a few minutes each time that the Mac backs up with only the changes that have occurred since the last backup. -
PLEASE HELP! ETHERNET CABLE IS NOT CONNECTING PROPERLY WITH FIOS ROUTER
I recently purchased a time capsule to use in conjunction with my mac. When I am prompted to connect the ethernet cable from the lan port on my fios router to the wan port on the tc, the cable will not connect properly to the lan port on the tc. If I connect it from the lan on the fios router to the lan on the tc the green indicator lights up to indicate a connection but this does not help the wan port situation. I am able to locate the network I created from my mac but this tc network is not connected to the internet as indicated by the amber blinking light on the front of the tc. Also since creating this non working tc network, my fios signal is almost non existant! I am new to all of this so any help at all would be greatly appreciated!!!
Don't worry about the cable. For now.
Set the TC to bridge mode.. In bridge there is no wan port.. so you can use any port on the TC.
Test with the TC plugged in FIOS.. use in turn all the ports to see if it will work.
Do not change any setting but bridge the TC from default.. ie do not set extend wireless.. that will totally foul it up. Do not use join wireless, that will triple foul it up. Absolute default.. set TC to bridge... plug into the FIOS.. ethernet to any port that the light goes on.
Do a snapshot of the TC setup from airport utility and post. -
How to connect 2 ethernet cables to 1 port? Help me please.
My computer has one ethernet port, but I need to be able to connect two ethernet cables to it.
I am about to get satellite internet which requires an ethernet port and also about to sign up to a VoIP (Voice over IP) service which also requires an ethernet port.
Is there something I can buy or do to overcome this problem?
Sorry if this question seems obvious, but I really don't have a clue and would be very thankful for some good advice.
Cheers,
Crystal Venus.Crystal,
You need an Ethernet Hub, or Router. This will allow you to "Split" the connection from your satellite internet to the VOIP phone box, and to your computer. These are readily available at any computer store, like Best Buy, CompUSA etc.
Your internet provider might even have some info for you on this front. -
I'm trying to get on the internet and it is saying unable to connect to your server any ideas what I have to do to get on the internet I know the ethernet cable is OK.
Disconnect the ethernet cable from your mac,
disconnect the modem and the router from the power,
wait for at least 30 seconds,
connect the power to the modem, wait for at least thirty seconds,
connect the power to the D-Link, wait for at least thirty seconds,
connect the ethernet cable to the mac. -
AE Works with Ethernet Cable, but not Wirelessly. Please Help!!
I purchased the AE to run music streams via Airtunes from my wireless router/PC upstairs to my stereo downstairs. When I hook everything up upstairs with the ethernet cable, everything works like a charm, but the moment I remove the ethernet cable, the AE is not being picked up by the network. I set everything up for the wireless network (while the ethernet cable was hooked up) and have a green light on the AE, but when I try to use it wirelessly, it is blinking amber and not appearing within AirPort Utlity (only when hooked up with ethernet). I have a Westell 327W Wireless Modem/Router and could use some advice as to what I am doing wrong to get some tunes downstairs.
Thank you in advance.Hi:
I was chasing this very topic for a long while, then took a break.
You are suppose to be able to stream music from your PC to external stereo speakers via iTunes, thru an Airport Express (AE) wirelees connection.
Here's my status:
It is pretty easy to get a wireless connection up & running so that you can play music from your laptop/pc to external wirelss speakers via iTunes, thru AE.
I have that up & running. The problem comes in when trying to add the Airport Express to an already existing Linksys router's wireless network. When setting
the AE up, you'll most likely get 4 error messages that have to be addressed before you go from from a flashing amber LED to a solid green LED. If you are just using Apple's ad-hoc wireless conncetion, you'll need to use Airport Utility to address the 4 issues. Basically, Airport Utility doesn't know how to address AE, since it doesn't have any IP address to a network. The other 3 are simlar problems. If you just tell Aiport Utility to ignore each of these problems, you will get the solid green LED on AE, and you'll be able to stream music directly from your PC to your speakers, wirelessly, once you finish the AE configuartion, and Airport Utility reconfigures the AE.
I have my HP laptop and printer setup with a Linksys 54G Router and Printserver,
so that the laptop and printer communicate wirelssly via the Linksys Router.
Now comes the fun...trying to add the AE to this already existing wireless network. I could get the AE to work when I had an Ethernet cable connected directly from a port on the router to the AE, but when I disconnected the Ethernet cable, the router no longer saw the AE in the network. I followed all of the instructions in the Airport Utility software, went seeking advice on this
newsgroup, the web, etc. Found lots of good information, but a lot of it was outdated.
I have my Linksys wirless network setup with WEP-64 encryption.
From what I have gathered, it is much easeir to add the AE to a WPA/WPA2 network, than to a WEP64/128 network, just because of newer protocols.
The problem that I have is that WPA encryption works much slower for me than
WEP encryption. Example: iTunes is roughly 60 MB is size. Downloading it
using WPA, results is a download time of 22-23 minutes; where a download
using WEP-64 takes 75-80 seconds !
In the past, what I was trying to do was add the AE to my already existing
wireless network. Now, I have a wireless network for the AE. I want to try to add this network to my already existing wireless netowrk for the Linksys router.
I just haven't taken the time to try it yet. From what Apple tells me, Linksys makes this setup messy. The fact that the AE works by itself proves that the
device is OK.
For a history of the problems that I have been chasing in trying to get the AE setup and added to my already existing Linksys router network, visit the following link in the list of "problems" on this Apple newsgroup's web page.
Search for the folowing topic title:
Problems Setting-up Airport Express to Play Music thru External Speakers
Currently, is is at the bottom of page 12 of this discusssion group.
The info in it may be useful to you.
Please let me know if you get yours up & running in the Linksys wireless
network.
Thank you
DaleB ([email protected])
Maybe you are looking for
-
Is there a way to create date based timelines in iBook Author?
Hi guys, Is there a way to create nice looking timelines in iBook author? I was going to utlize the interactive image functionality but it would be great if there were other options. Just something simple like dates along the bottom and then pictures
-
IPhone 4 wiped out after trying to upgrade to OS5
I tried to upgrade my iPhone 4 to OS5, completed the back-up and then when the software was installing I received an error message and now my phone is wiped out. How do I access my back up? I don't want to restore my phone and loose everything it if
-
Reading a file and put it in a String
I have a file and I want to put its rows in an array of strings I've done that File file = new File("./arguments/tabsArguments.txt"); FileReader fileReader = new FileReader(file); String mystring; fileReader.read(mystring,0,20); for (int i=0;i<i_stri
-
Every time if i try to update to a new itunes it would fail and if i do the install maully then some would say "The windows installler service could not be accessed" error and the others it would say "The system administrator has set policies to bloc
-
I AM NEW TO BI ,WHERE I WILL GET DETAIL INFO FOR 'USEREXIT'
HI ALL, I AM NEW TO BI WHERE I WILL GET ALL DETAILS ABOUT USEREXITS. AND HOW TO WRITE SIMPLE USEREXIT....I.E SOME EXAMPLE RELATED TO IT..