Ethernet Cable Plugged Into Mac Mini, but it says it isn't.
I'm all new to the MacWorld, just got my Mac Mini yesterday. . . .
So I want to create a network between my PC + Mac by direct Ethernet for the Internet and file sharing.
I've got everything done on the PC end, but when I try to get it working on my Mac it says that there is no Ethernet Cable plugged in :S
Any suggestions on what to do?
Mac Mini - Intel Solo Mac OS X (10.4.5)
If I understand you, you have run a cable directly from your pc to your mac. If this is the case, you need to run a crossover cable, not a standard ethernet cable.
Similar Messages
-
My wireless network is working fine. I have an AirPort extreme hooked to a cable modem and all other devices around the house can get into the network.
However, I am trying to hook up a MagicJack to the AirPort via an ethernet cable without success. The AirPort has 3 lan ports for this kind of purpose. The MagicJack works fine when plugged into my Mac's USB port, but it seems to slow the Mac down too much.
I have tried a new cable, checked that I have power and have rummaged through AirPort Utility, but cannot get the AirPort port to even light up. I've also restarted and rebooted both the AirPort and the cable modem multiple times.
Any advice would be appreciated.
ThanksKiltedTim. You nailed it. I tried the MJ directly into the cable modem and still can't get a phone line. I'll see what MJ can do now.
Thanks and thanks to alanoconner for your help. -
6 GB iPod Mini discharges when plugged into Mac Mini via USB 2.0 hub
I have a 6 GB iPod Mini and when i connect it to my computer, instead of charging, it discharges. The iPod is connected to a self powered USB 2.0 hub. Does anybody have any ideas of what to do. I need a hub because the Mac Mini only has 2 USB ports and the keyboard and mouse don't work through the hub (well the keyboard it self does but the hub doesn't which the Mighty Mouse is plugged into)
ThanksWhen i say self powered i mean that it has an external power supply (my hub it has two lights, when it is connected to USB and has p\s connected and plugged in a light lights up that has the word "Self" next to it, when it is connected just to USB it has a light that lights up with the word "Bus" next to it.) I am sorry if i confused you (or if i confused myself). About the firewire thing, i am planning to get the next normal iPod Apple releases but the current ones dont support firewire so the new one probably wont either, so i will be in the same boat as i am now when i get a new one.
-
my ipad mini has water damage but when I plug into wall it says to connect to itunes. When I plug into Mac nothing happens. Not even a charging sign and nothing happens with itunes. Computer doesn't recognize it's plugged in.
If moisture got inside, it may have shorted the iPad's electronics.
Solutions for wet iPad.
http://www.gazelle.com/how-to/ipad/ipad-recover-from-water-damage
http://www.knowyourmobile.com/appleiphone/ipad/ipaduserguides/701079/how_to_fix_ an_ipad_if_it_gets_wet.html
Cheers, Tom -
I am looking to buy a Mac mini, but I already have a monitor with a dvi plug in. Will I be able to use this monitor with the Mac mini??
Here are the Mini's specs:
-
hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help
Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK. -
Sharing one ethernet cable with two macs using a USB Ethernet Adaptor
I have two computers running Mac OS 10.6 but only one ethernet cable in my office. One ethernet cable goes from the wall to Mac #1. I have a cisco USB Ethernet Adaptor USB300M that I like to use as OUTGOING ethernet cable from Mac #1 to plug into Mac #2. Does anybody know how this works? Simply plugging it in does not work. Thanks for any suggestions!
If either of these computers is a Mac Pro (65 lb.) tower, all of which have two Ethernet jacks, Internet sharing is crisply supported with any additional Hardware. Cable the wall jack Ethernet to the first Ethernet port, then cable the second Ethernet port to the second Mac. Configuration is described in this article:
Mac OS X 10.6 Help: Sharing your Internet connection -
Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive that I downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it? Would I have to get a hub so I could use the stuff I already have? Is that viewsonic too old to work on it?
What else would I need? Please advise...Yes for keyboard and mouse.
The monitor will work if it has an HDMI, VGA ir DVI input. If it only has a VGA input you will need this adopter
http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser#selected-step1=MINI-DISPLAY-PORT&selected-step2=VGA&step=3 -
how do i reload OS X Server on Mac Mini, App store says installed but no reset or reload, system tells me to reinstall?
Reboot holding down the Command and R keys. This will get you in to the Recovery partition. From there you can reinstall the entire OS. Please note, Server.app will not be included in the reinstall. You will need to log into your App store account to download it.
-
I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?
The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step. -
i have my iphone 5 plugged into my laptop but it wont connect with itunes, what do i need to do?
Have you tried reinstalling iTunes?
If this doesn't work maybe you have a faulty USB cable or drivers problems. -
My itunes account doesn't list "devices" above the playlist, as the syncing instructions give. How can I sync the itunes I have purchased & downloaded to my computer, to my ipod shuffle? The device is plugged into my computer, but nothing happens. Shouldn't the computer recognize the device? It doesn't. Please help!
As a test, shut down your computer and disconnect ALL USB devices. Do this procedure to Reset the shuffle
http://support.apple.com/kb/HT1655
Start up computer with nothing connected, except for standard keyboard and mouse (if it's not a laptop). Run iTunes. Connect shuffle to a direct USB port on the computer. See if there's any improvement,
If the shuffle is now recognized, there may have been a USB device conflict previously, or maybe all of the devices connected at the same time overloads the USB bus (for power). An iPod charges its battery while connected, so it is a high-power USB device. -
I recently updated and restored my Iphone on a Mac. My music was erased, therefore, I am trying to sync all of the music from my computer into the iPhone, but it says that I need to use the original computer/itunes in order to sync, but it is the same computer and iTunes account. The error reads: The iPhone, "Name" is synced with another iTunes library. Do you want to erase this iPhone and a sync with this iTunes library? If I click "Erase and Sync," will it delete my contacts, apps, etc?
The following may help: iOS: Device not recognized in iTunes for Windows
-
I transferred data from my Macbook Pro to my Mac mini but it forced me to make a new user for my old data. How do I transfer my music, pics, and docs from the "old" user to the new user (so that I only have one user instead of 2?)
Unless you transfer the files from Setup Assistant, Migration Assistant creates a new user with the data.
To transfer the files to your first user, you have to log on this new user, and copy all your files to /Users/Shard folder. This is a folder where you can put the files you want to share between two or more users, and all users can read and write in it.
After copying the files, go to your first user, open /Users/Shared folder, and copy the files to your user folders. If you migrated applications, you must know that they are stored in a common folder (/Applications), so you don't have to transfer them. To open /Users/Shared folder, open Go menu (in the menu bar) > Go to Folder, and type the folder -
I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.
I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.
Maybe you are looking for
-
Where do my files have to be in order to use creative cloud and not have my indesign links break? I'll need to use Indesign on different computers and my images won't be traveling with me... will I need to relink every image every time? this gets way
-
View Object attributes are not setting
Hi, I have created a table region and attached a row header view attribute to it.I have a created a transient attribute also. I am setting transient vo attribute in process request of the controller but the values are not reflecting in the table. I a
-
GOS: create store business document
Hi experts, when using GOS to attach a document (create store business document), the system enables me to attach the corresponding documents. The thing is that once created the attachment, if you display list, the documents attached can not be disti
-
Problems installing Acrobat Pro X
Hello. I have a license for master suite 6, everything has been installed and working fine, including Acrobat Pro X. Suddenly Acrobat Pro X stopped working (I would click on it, or a PDF file and nothing would happen). I uninstalled the entire mas
-
Import from SD Card from Canon Vixia HFM301
Hi there, So I got this new Canon Vixia HF M301 HD video camera that use SD cards. I've taken some video and want to see how it looks. I thought that I would be able to import the video right from the SD card, but I can't see to figure it out. I have