Ethernet Capability in ThinkPad A21m [2628]
My ThinkPad A21m [2628] does not currently have Ethernet capability. (“Network card” was an optional extra at the time of purchase in 2001.) The Ethernet port on the rear of the ThinkPad A21m is covered over with a cover that looks like it could be pried off. It is hard to see whether there is an actual Ethernet port underneath the cover.
I am wondering whether I would be able to add Ethernet capability to this computer. Can I simply pry off the cover, buy a compatible network card, put it into the computer myself according to the hardware manual, and then install the driver? Or, does the fact that the Ethernet port is covered over mean that there is nothing I can do about it now? My operating system is Windows 2000 SP4. I would appreciate any advice on this issue. Thank you.
Solved!
Go to Solution.
Yes.
Just replace the modem card with an appropriate LAN/modem combo card and it will work "out of the box".
You might have to download the appropriate driver, but the procedure is as simple as stated above, I've performed this myself many a times in the old days on both A2x and T2x units.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.
Similar Messages
-
Compatible WIFI card for Thinkpad a21m, wifi orinoco silver no longer working
Thank you for having this forum available.
My husband passed down his Thinkpad A21M Type 2628-GTU to our son. The wifi card that was with it is a Lucent Technologies Orinoco Silver 11mbit/s t/n 03549501 p/n012938/c. When powered up last night, the ethernet was fully functional, but the wireless card didn't connect to the net. My husband assumed the Lucent card was bad. Is there something compatible I may buy to replace it? Do you have a suggestion on what he might have missed in trying to get it to work at home?
He has used this laptop all over the country including at home before, so I would imagine he knows what he is doing. But, we do have a new service provider since the company upgraded his computer system.
Thank you so much!Welcome to the forum!
Honestly, it's time to upgrade to a newer card anyway, at least b/g. Any PCMCIA wireless card will work with your A21m, it all depends on your router, and your personal preferences.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Hi, I am writing this for my Mother-In-Law. She has a Thinkpad A21M type 2628 G1U. The laptop does not seem to receive power even when it is plugged into the wall. The little green battery light goes on, I press the start button and the power light blinks once, and nothing else happens. No Fans, Hard drive does not start, no power to open the DVD drive, No LCD activity, No POST test NOTHING.
Since she does not use it very much I checked the memory module connections, removed and reinstalled -Yes I used a grounding strap, Same with the Hard Drive.
It has a docking station so I tried it with the docking station connected thinking maybe the power switch was not good. Using the power switch on the docking station did not change anything.
Is there anyone who could give me suggestions.
If she knew how to use it I would suggest she get a new one. But since she uses it so little, Solitaire mostly every few months, I would rather see if there is a simple inexpensive fix for this one.
Thank you all for your help.
BarryWelcome to the forum!
Let's try this: unplug the adapter, remove the hard and media drives as well as the battery. Press the "power" button ten times in a row, holding it down for ten seconds each time, and thirty seconds the last time around.
Plug the adapter back in and try to power on.
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Hard Drive Upgrade on a Thinkpad A20m 2628-11U
I've got a Thinkpad A20m 2628-11U that has an IBM Travelstar 10gig Drive in it. After using the laptop for about half an hour, the drive warms up and gets to the point of someone using a hammer and chisel to store data. So I decided to purchase a WD250BEVE (PATA) drive to replace it. Right off the bat, The laptop would not recognize the drive at all. I've tried updating the bios and such to no avail. I've even RMA'd the drive with western digital questioning them along the way as to the possibility of why their drive would not work in this unit. They show no record of complaint. When the new drive showed up, I got the same results. Can anybody tell me if IBM put a drive or Brand limit on this unit or have any idea why a WD would not be recognized at all?
Thanks for your time...
GaryWelcome to the forum!
Have you properly inserted the drive, because that's the reason for drive not being "seen" by the machine 90% of the time, and that can be tricky on A2x and A3x unit...make sure it's sitting properly in its caddy and is pushed in all the way.
Even if your machine had a BIOS limit (137GB for older ThinkPads) the drive would still be recognized. There are no "brand restrictions" on ThinkPads of this generation.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Hi everyone.
My dad's got a Thinkpad A21m and i can't access the BIOS because it's password protected. Since he doesn't remember which password he's put there, I thought opening up the laptop and disconnecting the small battery would be enough to reset the BIOS, but now it's worse! Now he's asking me to recheck time and date settings in the BIOS, still asking me for a password! So, basically, now i can't even access the OS. Is there any way i can reset the password? Or have i done that and now he's asking me for a default password, which i don't know?
Could anyone please help me out on this?
Message Edited by ejmoreira on 05-02-2009 12:03 PMejmoreira, welcome to the forum,
your father will need to remember which password was set, removing the bios battery has prompted the request for the supervisor password. There are no default passwords which will help.
The only other suggestions we can offer you here are that you look in the Maintainance Manual, which explains about passwords, and replace the mainboard, or contact service or a service partner in your area.
I'm sorry; this subject is not allowed to be discussed here as stated in the forum rules and I have to lock the thread.
No posts shall include instructions or directions intended to subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc, nor shall any posts provide descriptions to the location of, nor direct links to content related to these topics.
Thanks for understanding
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
My Thinkpad a22m 2628 is running Windows 2000 SP4 and the drivers for the sound are installed acording to the computer and it seems to be utilizing the resources correctly. I have turned on the spekers themselves and they work fine under linux I know that it is a combo driver (CS4624/CS4297A) and I have installed to the letter of the drivers from the Lenovo website but still no sound with the speakers or headphone jacks any help would be appreciated.
Thank you in advanceHello,
if you run the downloaded audio-package, it only will be extracted to C:\DRIVERS\W2K\Audio (or similar). You additionally have to execute the CRYSETUP.exe from there.
Please also read the "Readme" from download page for additional requirements to get sound.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection -
Driver matrices for Win8 upgrade-capable systems - ThinkPad T Series
To support the General Availabilty (GA) release of Windows 8, below are the direct URLs to the driver matrices for systems, within this family, that Lenovo has designated/certified as Windows 8 upgrade-capable. The direct links may save you time as you work through the upgrade process and require drivers compatible with your hardware configuration. The URLs were checked to be valid/working as of 10/25/2012. Please do post if you find errors.
Hope this helps ease your transition.
Cheers.
The complete list of Windows 8 Upgrade-Capable Systems (current as of 10/24/2012):
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT074688
The ThinkPad driver matrix master list:
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=TPAD-MATRIX
Direct driver matrix URLs for systems in this product family: ThinkPad T Series
T410 http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-74582
T410i http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063286
T410s http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063287
T410si http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063288
T510 http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063289
T510i http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063290
T420 http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167
T420i http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063244
T420s http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063249
T420si http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063266
T430 http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073828
T430i http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073830
T430s http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073829
T430si http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073831
T430u http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT074912
T520 http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063271
T520i http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063272
T530 http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073832
T530i http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073833
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.Hmmm. I have a W520 and a dock. It's been running 8.1 since it's been out.
Renee -
Is Snow base station (M8440, dual ethernet) capable of WPA2 ??
Am about to buy an Airport base station (snow/M8440) off eBay. Does anyone know if this base station is capable of WPA or WPA2? I will be using it with a Titanium G4 867mhz and 10.4.9.
I probably won't buy it if it is only capable of WEP. Thanks.No, the snow AirPort base station (ABS) is not capable of WPA nor WPA2.
The snow ABS only does 64 and 128 bit WEP. -
ThinkVantage Toolbox with machines prior to Jan 2004
So I've got an OLD T23 that I'm trying to install the Toolbox on, and get errors during install. It's trying to send error messages to Microsoft (XP Home SP3) when it hiccups, and the message references pcdrcui.exe. Once the message sends, the process continues until completion (supposedly). But when trying to open Toolbox, get the initial banner screen, which goes away, then get the error message again.
I've noticed that there is a reference to systems that are Jan 2004 and later for the Toolbox. Is this the root of my problem (mfg date is 5/02)? If so, is there any kind of workaround or is it a complete dead-end? If workaround, what would that entail?
Any help much appreciated!
Solved!
Go to Solution.I am running Toolbox V6.0.5849.3 on my ThinkPad A21m (2628 G1U) running with Windows XP Professional with SP3 with no problems other than the machine is extremely slow due to its 800 mz CPU. This machine is of the same vintage as that T23.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's -
PCI slot in Thinkpad Dock II unusable
Hello, I have a Thinkpad a22m 2628-S1U which can be used with the Thinkpad Dock II. To avoid feeling tempted to buy a new laptop I bought that dock as well as an ATI Radeon x1550 to put in its PCI slot. These items were said to be compatible on http://thinkwiki.org the Linux thinkpad wiki.
Now that I've tried it out, I'm starting to think the contributors to that site were windows users who didn't read the topic. Starting up docked gave the following lspci output (notice there's no radeon card):
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
00:04.0 PCI bridge: Texas Instruments PCI2032 PCI Docking Bridge
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
08:01.0 IDE interface: Silicon Image, Inc. PCI0648 (rev 01)
08:02.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
08:02.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
0f:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
For comparison, here's what my lspci looks like undocked:
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
02:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
So a few parts of the dock are getting detected but not the most important parts. The error that I think is related to the absence of the graphics card appears in dmesg. Look for the part about "cannot allocate resource region":
Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
PAT disabled. Not yet verified on this CPU type.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131056
HighMem 131056 -> 131056
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131056
On node 0 totalpages: 131056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125968 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
SMP: Allowing 0 CPUs, 0 hotplug CPUs
PERCPU: Allocating 39464 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0140e000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 697.417 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03d3000 - 0xc0415000 ( 264 kB)
.data : 0xc031225e - 0xc03cc380 ( 744 kB)
.text : 0xc0100000 - 0xc031225e (2120 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 973.82 BogoMIPS (lpj=1622127)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080321
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0e80)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (973.82 BogoMIPS).
net_namespace: 652 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
PCI: region 0000:08:02.0/9 too large: 0x0000000000000000-0x0000000003ffffff
PCI: region 0000:08:02.1/9 too large: 0x0000000000000000-0x0000000003ffffff
PCI: region 0000:08:02.0/10 too large: 0x0000000000000000-0x0000000003ffffff
PCI: region 0000:08:02.1/10 too large: 0x0000000000000000-0x0000000003ffffff
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xf0200000-0xf02fffff
PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
PCI: Bus 15, cardbus bridge: 0000:00:02.0
IO window: 0x00001400-0x000014ff
IO window: 0x00001c00-0x00001cff
PREFETCH window: 0x30000000-0x33ffffff
MEM window: 0x34000000-0x37ffffff
PCI: Bus 19, cardbus bridge: 0000:00:02.1
IO window: 0x00003400-0x000034ff
IO window: 0x00003800-0x000038ff
PREFETCH window: 0x38000000-0x3bffffff
MEM window: 0x3c000000-0x3fffffff
PCI: Bus 9, cardbus bridge: 0000:08:02.0
IO window: 0x00004000-0x000040ff
IO window: 0x00004400-0x000044ff
PCI: Bus 13, cardbus bridge: 0000:08:02.1
IO window: 0x00004800-0x000048ff
IO window: 0x00004c00-0x00004cff
PCI: Bridge: 0000:00:04.0
IO window: 4000-4fff
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 662k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
Switched to high resolution mode on CPU 0
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt for device 0000:08:01.0 disabled
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.20
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
e100: eth0: e100_probe: addr 0xf0120000, irq 10, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
Linux agpgart interface v0.103
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to: cpufreq changes.
/proc/exmap: insert
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
Clocksource tsc unstable (delta = 142862014 ns)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM0] (49 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x0038, PCI irq 9
Socket status: 30000006
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
PCI: Bus 9, cardbus bridge: 0000:08:02.0
IO window: 0x00004000-0x000040ff
IO window: 0x00004400-0x000044ff
PREFETCH window: 0x40400000-0x407fffff
MEM window: 0x40800000-0x40bfffff
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
irq 11: nobody cared (try booting with the "irqpoll" option)
Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
[<c015a764>] __report_bad_irq+0x24/0x90
[<c015aa52>] note_interrupt+0x282/0x2c0
[<c0159e70>] handle_IRQ_event+0x30/0x60
[<c015b2c3>] handle_level_irq+0xd3/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c0159e57>] handle_IRQ_event+0x17/0x60
[<c015b26d>] handle_level_irq+0x7d/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c015007b>] show_initstate+0xb/0x50
[<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
[<e0bd4bbb>] ti12xx_override+0x23b/0x6a0 [yenta_socket]
[<c0210ce3>] pci_setup_cardbus+0x103/0x190
[<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
[<c01cfa11>] sysfs_find_dirent+0x21/0x30
[<c01d09c5>] sysfs_create_link+0x85/0x120
[<c020b700>] pci_match_device+0xa0/0xc0
[<c020b816>] pci_device_probe+0x56/0x80
[<c026a9a6>] driver_probe_device+0x86/0x1a0
[<c026ab31>] __driver_attach+0x71/0x80
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a2d4>] bus_for_each_dev+0x44/0x70
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a836>] driver_attach+0x16/0x20
[<c026aac0>] __driver_attach+0x0/0x80
[<c0269c67>] bus_add_driver+0x1a7/0x220
[<c020b760>] pci_device_remove+0x0/0x40
[<c026accc>] driver_register+0x5c/0x130
[<c020ba4d>] __pci_register_driver+0x3d/0x80
[<c0150738>] sys_init_module+0x148/0x1ca0
[<c01a4bfa>] seq_open+0x3a/0x90
[<c01c2aa6>] pde_users_dec+0x16/0x50
[<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
[<c0268610>] device_remove_file+0x0/0x20
[<c0103f73>] sysenter_past_esp+0x78/0xb1
=======================
handlers:
[<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
[<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
Disabling IRQ #11
pccard: CardBus card inserted into slot 0
ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
ACPI: PCI Interrupt 0000:0f:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
USB Universal Host Controller Interface driver v3.0
input: Video Bus as /class/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x278, irq 5 [PCSPP,TRISTATE]
MadWifi: ath_attach: Switching rfkill capability off.
NET: Registered protocol family 23
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
IrDA: Registered device irda0
nsc-ircc, Found dongle: Reserved
ppdev: user-space parallel port driver
Yenta: ISA IRQ mask 0x0018, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
PCI: Bus 13, cardbus bridge: 0000:08:02.1
IO window: 0x00004800-0x000048ff
IO window: 0x00004c00-0x00004cff
PREFETCH window: 0x40c00000-0x40ffffff
MEM window: 0x41000000-0x413fffff
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
irq 11: nobody cared (try booting with the "irqpoll" option)
Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
[<c015a764>] __report_bad_irq+0x24/0x90
[<c015aa52>] note_interrupt+0x282/0x2c0
[<c0159e70>] handle_IRQ_event+0x30/0x60
[<c015b2c3>] handle_level_irq+0xd3/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c014007b>] set_process_cpu_timer+0x2b/0xd0
[<c0159e57>] handle_IRQ_event+0x17/0x60
[<c015b26d>] handle_level_irq+0x7d/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c015007b>] show_initstate+0xb/0x50
[<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
[<e0bd4aff>] ti12xx_override+0x17f/0x6a0 [yenta_socket]
[<c0210ce3>] pci_setup_cardbus+0x103/0x190
[<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
[<c01cfa11>] sysfs_find_dirent+0x21/0x30
[<c01d09c5>] sysfs_create_link+0x85/0x120
[<c020b700>] pci_match_device+0xa0/0xc0
[<c020b816>] pci_device_probe+0x56/0x80
[<c026a9a6>] driver_probe_device+0x86/0x1a0
[<c026ab31>] __driver_attach+0x71/0x80
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a2d4>] bus_for_each_dev+0x44/0x70
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a836>] driver_attach+0x16/0x20
[<c026aac0>] __driver_attach+0x0/0x80
[<c0269c67>] bus_add_driver+0x1a7/0x220
[<c020b760>] pci_device_remove+0x0/0x40
[<c026accc>] driver_register+0x5c/0x130
[<c020ba4d>] __pci_register_driver+0x3d/0x80
[<c0150738>] sys_init_module+0x148/0x1ca0
[<c01a4bfa>] seq_open+0x3a/0x90
[<c01c2aa6>] pde_users_dec+0x16/0x50
[<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
[<c0268610>] device_remove_file+0x0/0x20
[<c0103f73>] sysenter_past_esp+0x78/0xb1
=======================
handlers:
[<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
[<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
[<e0ae4e30>] (ath_intr+0x0/0x4810 [ath_pci])
Disabling IRQ #11
Yenta: ISA IRQ mask 0x0018, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 7, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
CMD648: IDE controller (0x1095:0x0648 rev 0x01) at PCI slot 0000:08:01.0
ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
CMD648: 100% native mode on irq 9
ide0: BM-DMA at 0x3000-0x3007
ide1: BM-DMA at 0x3008-0x300f
Probing IDE interface ide0...
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
Probing IDE interface ide1...
usb 1-1.4: new low speed USB device using uhci_hcd and address 3
usb 1-1.4: configuration #1 chosen from 1 choice
ide0 at 0x3020-0x3027,0x3016 on irq 9
ide1 at 0x3018-0x301f,0x3012 on irq 9
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
lp0: using parport0 (interrupt-driven).
usbcore: registered new interface driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input9
input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
JFS: nTxBlock = 4027, nTxLock = 32219
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
For comparison here is my dockless dmesg:
Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
PAT disabled. Not yet verified on this CPU type.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131056
HighMem 131056 -> 131056
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131056
On node 0 totalpages: 131056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125968 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
SMP: Allowing 0 CPUs, 0 hotplug CPUs
PERCPU: Allocating 39464 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0140e000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 697.425 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03d3000 - 0xc0415000 ( 264 kB)
.data : 0xc031225e - 0xc03cc380 ( 744 kB)
.text : 0xc0100000 - 0xc031225e (2120 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1396.15 BogoMIPS (lpj=2326640)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080321
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0a20)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (1396.15 BogoMIPS).
net_namespace: 652 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xf0200000-0xf02fffff
PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
PCI: Bus 2, cardbus bridge: 0000:00:02.0
IO window: 0x00001400-0x000014ff
IO window: 0x00001c00-0x00001cff
PREFETCH window: 0x30000000-0x33ffffff
MEM window: 0x34000000-0x37ffffff
PCI: Bus 6, cardbus bridge: 0000:00:02.1
IO window: 0x00003000-0x000030ff
IO window: 0x00003400-0x000034ff
PREFETCH window: 0x38000000-0x3bffffff
MEM window: 0x3c000000-0x3fffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 662k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
input: AT Translated Set 2 keyboard as /class/input/input1
Switched to high resolution mode on CPU 0
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.20
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
e100: eth0: e100_probe: addr 0xf0120000, irq 9, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
Linux agpgart interface v0.103
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to: cpufreq changes.
/proc/exmap: insert
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
Clocksource tsc unstable (delta = 142842086 ns)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM0] (50 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
spurious 8259A interrupt: IRQ7.
Yenta: ISA IRQ mask 0x0498, PCI irq 11
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x0498, PCI irq 5
Socket status: 30000006
pccard: CardBus card inserted into slot 0
ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 5, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: Video Bus as /class/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
PPP generic driver version 2.4.2
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
NET: Registered protocol family 23
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Found dongle: Reserved
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
JFS: nTxBlock = 4027, nTxLock = 32219
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
I've tried multiple options in the BIOS. You can select AGP or PCI as the card for the root display device. The default is PCI so if there's a docked PCI card at POST, the BIOS will use that for the root display device... otherwise it will use the built in card. You can also select the root display device as LCD or CRT or both. The default is CRT so if there is an external monitor that's where the bootloader menu and such will appear, otherwise the laptop's own display gets used. Even if I've understood these incorrectly, all combinations yield a PCI video card that is not detected by lspci.
I've also tried loading the module dock right after thinkpad_acpi. It loads and appears in lsmod but it doesn't help the situation at all. It also doesn't add a dock file to /proc/acpi/ibm. I also tried passing pci=routirq to the kernel, whatever that does and I've tried changing the four PCI related IRQ numbers in the BIOS and this has not helped.I did upgrade the kernel yesterday and it caused the syntax of dmesg to change somewhat. Here is a docked dmesg from 2.6.27:
Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
last_pfn = 0x1fff0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1fff0000 @ 7000-d000
RAMDISK: 00e4d000 - 00effb5b
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1fff0000
low ram: 00000000 - 1fff0000
bootmap 00002000 - 00006000
(9 early reservations) ==> bootmem [0000000000 - 001fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
#4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
#5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001fff0
HighMem 0x0001fff0 -> 0x0001fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130959
free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 125968 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01402000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PERCPU: Allocating 39324 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 697.407 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03f3000 - 0xc043b000 ( 288 kB)
.data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
.text : 0xc0100000 - 0xc0319f76 (2151 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324690)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0e00)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (1395.93 BogoMIPS).
net_namespace: 832 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
pci 0000:00:03.0: supports D1
pci 0000:00:03.0: supports D2
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
pci 0000:00:03.1: supports D1
pci 0000:00:03.1: supports D2
pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PME# disabled
pci 0000:00:04.0: supports D1
pci 0000:00:04.0: supports D2
PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
pci 0000:00:05.0: supports D1
pci 0000:00:05.0: supports D2
PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
PCI: 0000:08:01.0 reg 10 io port: [3020, 3027]
PCI: 0000:08:01.0 reg 14 io port: [3014, 3017]
PCI: 0000:08:01.0 reg 18 io port: [3018, 301f]
PCI: 0000:08:01.0 reg 1c io port: [3010, 3013]
PCI: 0000:08:01.0 reg 20 io port: [3000, 300f]
pci 0000:08:01.0: supports D1
pci 0000:08:01.0: supports D2
PCI: 0000:08:02.0 reg 10 32bit mmio: [52000000, 52000fff]
pci 0000:08:02.0: supports D1
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
PCI: 0000:08:02.1 reg 10 32bit mmio: [53000000, 53000fff]
pci 0000:08:02.1: supports D1
pci 0000:08:02.1: supports D2
pci 0000:08:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:02.1: PME# disabled
pci 0000:00:04.0: transparent bridge
PCI: bridge 0000:00:04.0 io port: [0, fff]
PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
PCI: bridge 0000:00:04.0 32bit mmio pref: [0, fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:02: io resource (0x22-0x22) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:02: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:02: io resource (0xb2-0xb3) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:0a: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
pci 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:04.0: BAR 7: can't allocate resource
pci 0000:00:04.0: BAR 8: can't allocate resource
pci 0000:00:04.0: BAR 9: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
pci 0000:00:02.0: CardBus bridge, secondary bus 0000:0f
pci 0000:00:02.0: IO window: 0x001400-0x0014ff
pci 0000:00:02.0: IO window: 0x001c00-0x001cff
pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
pci 0000:00:02.1: CardBus bridge, secondary bus 0000:13
pci 0000:00:02.1: IO window: 0x003400-0x0034ff
pci 0000:00:02.1: IO window: 0x003800-0x0038ff
pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
pci 0000:08:02.0: CardBus bridge, secondary bus 0000:09
pci 0000:08:02.0: IO window: 0x004000-0x0040ff
pci 0000:08:02.0: IO window: 0x004400-0x0044ff
pci 0000:08:02.0: PREFETCH window: 0x48000000-0x4bffffff
pci 0000:08:02.0: MEM window: 0x40000000-0x43ffffff
pci 0000:08:02.1: CardBus bridge, secondary bus 0000:0d
pci 0000:08:02.1: IO window: 0x004800-0x0048ff
pci 0000:08:02.1: IO window: 0x004c00-0x004cff
pci 0000:08:02.1: PREFETCH window: 0x4c000000-0x4fffffff
pci 0000:08:02.1: MEM window: 0x44000000-0x47ffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:08
pci 0000:00:04.0: IO window: 0x4000-0x4fff
pci 0000:00:04.0: MEM window: 0x40000000-0x47ffffff
pci 0000:00:04.0: PREFETCH window: 0x00000048000000-0x0000004fffffff
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
pci 0000:00:02.1: power state changed by ACPI to D0
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [2000, 2fff]
bus: 01 index 1 mmio: [f0200000, f02fffff]
bus: 01 index 2 mmio: [f8000000, fbffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 0f index 0 io port: [1400, 14ff]
bus: 0f index 1 io port: [1c00, 1cff]
bus: 0f index 2 mmio: [30000000, 33ffffff]
bus: 0f index 3 mmio: [34000000, 37ffffff]
bus: 13 index 0 io port: [3400, 34ff]
bus: 13 index 1 io port: [3800, 38ff]
bus: 13 index 2 mmio: [38000000, 3bffffff]
bus: 13 index 3 mmio: [3c000000, 3fffffff]
bus: 08 index 0 io port: [4000, 4fff]
bus: 08 index 1 mmio: [40000000, 47ffffff]
bus: 08 index 2 mmio: [48000000, 4fffffff]
bus: 08 index 3 io port: [0, ffff]
bus: 08 index 4 mmio: [0, ffffffff]
bus: 09 index 0 io port: [4000, 40ff]
bus: 09 index 1 io port: [4400, 44ff]
bus: 09 index 2 mmio: [48000000, 4bffffff]
bus: 09 index 3 mmio: [40000000, 43ffffff]
bus: 0d index 0 io port: [4800, 48ff]
bus: 0d index 1 io port: [4c00, 4cff]
bus: 0d index 2 mmio: [4c000000, 4fffffff]
bus: 0d index 3 mmio: [44000000, 47ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 714k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 288k freed
Switched to high resolution mode on CPU 0
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
pata_acpi 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pata_acpi 0000:08:01.0: PCI INT A disabled
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
Driver 'sr' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.21
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
e100 0000:00:03.0: PME# disabled
e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 440BX Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to cpufreq changes
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
Clocksource tsc unstable (delta = 142865538 ns)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (24 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000006
Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
irq 9: nobody cared (try booting with the "irqpoll" option)
Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
[<c015ce54>] __report_bad_irq+0x24/0x90
[<c015d142>] note_interrupt+0x282/0x2c0
[<c015c450>] handle_IRQ_event+0x30/0x60
[<c015d9b3>] handle_level_irq+0xd3/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c0104927>] common_interrupt+0x23/0x28
[<c03100d8>] cache_add_dev+0x272/0x44a
[<c015c430>] handle_IRQ_event+0x10/0x60
[<c015d95d>] handle_level_irq+0x7d/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c015cbc1>] setup_irq+0x121/0x250
[<c0104927>] common_interrupt+0x23/0x28
[<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
[<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
[<e0c16c58>] ti12xx_override+0x238/0x6a0 [yenta_socket]
[<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
[<c01d4012>] sysfs_add_one+0x12/0x50
[<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
[<c0318f05>] _spin_unlock+0x5/0x20
[<c020bce0>] pci_match_device+0xa0/0xc0
[<c020c4b6>] pci_device_probe+0x56/0x80
[<c026da76>] driver_probe_device+0x86/0x1a0
[<c0318af4>] _spin_lock_irqsave+0x34/0x50
[<c026dc01>] __driver_attach+0x71/0x80
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d3a4>] bus_for_each_dev+0x44/0x70
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d906>] driver_attach+0x16/0x20
[<c026db90>] __driver_attach+0x0/0x80
[<c026cd37>] bus_add_driver+0x1a7/0x220
[<c020c400>] pci_device_remove+0x0/0x40
[<c026dd9c>] driver_register+0x5c/0x130
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c020c6f7>] __pci_register_driver+0x47/0x90
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c010111a>] do_one_initcall+0x2a/0x160
[<c0123480>] hrtick_start_fair+0x190/0x1b0
[<c0126635>] check_preempt_wakeup+0xe5/0x120
[<c0126def>] try_to_wake_up+0xaf/0x180
[<c015474b>] sys_init_module+0x8b/0x1b0
[<c0103ef3>] sysenter_do_call+0x12/0x33
=======================
handlers:
[<c0229cfc>] (acpi_irq+0x0/0x1f)
[<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
Disabling IRQ #9
pccard: CardBus card inserted into slot 0
PCI: 0000:0f:00.0 reg 10 32bit mmio: [0, ffff]
ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
ath_pci 0000:0f:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
USB Universal Host Controller Interface driver v3.0
input: Video Bus as /class/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Error: Driver 'pcspkr' is already registered, aborting...
NET: Registered protocol family 23
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
ppdev: user-space parallel port driver
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
cmd64x 0000:08:01.0: IDE controller (0x1095:0x0648 rev 0x01)
CMD64x_IDE 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
cmd64x 0000:08:01.0: 100% native mode on irq 9
ide0: BM-DMA at 0x3000-0x3007
ide1: BM-DMA at 0x3008-0x300f
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x3020-0x3027,0x3016 on irq 9
ide1 at 0x3018-0x301f,0x3012 on irq 9
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
irq 9: nobody cared (try booting with the "irqpoll" option)
Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
[<c015ce54>] __report_bad_irq+0x24/0x90
[<c015d142>] note_interrupt+0x282/0x2c0
[<c015c450>] handle_IRQ_event+0x30/0x60
[<c015d9b3>] handle_level_irq+0xd3/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c0104927>] common_interrupt+0x23/0x28
[<c031007b>] cache_add_dev+0x215/0x44a
[<c03100d8>] cache_add_dev+0x272/0x44a
[<c015c430>] handle_IRQ_event+0x10/0x60
[<c015d95d>] handle_level_irq+0x7d/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c015cbc1>] setup_irq+0x121/0x250
[<c0104927>] common_interrupt+0x23/0x28
[<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
[<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
[<e0c16b97>] ti12xx_override+0x177/0x6a0 [yenta_socket]
[<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
[<c01d4012>] sysfs_add_one+0x12/0x50
[<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
[<c0318f05>] _spin_unlock+0x5/0x20
[<c020bce0>] pci_match_device+0xa0/0xc0
[<c020c4b6>] pci_device_probe+0x56/0x80
[<c026da76>] driver_probe_device+0x86/0x1a0
[<c0318af4>] _spin_lock_irqsave+0x34/0x50
[<c026dc01>] __driver_attach+0x71/0x80
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d3a4>] bus_for_each_dev+0x44/0x70
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d906>] driver_attach+0x16/0x20
[<c026db90>] __driver_attach+0x0/0x80
[<c026cd37>] bus_add_driver+0x1a7/0x220
[<c020c400>] pci_device_remove+0x0/0x40
[<c026dd9c>] driver_register+0x5c/0x130
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c020c6f7>] __pci_register_driver+0x47/0x90
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c010111a>] do_one_initcall+0x2a/0x160
[<c0123480>] hrtick_start_fair+0x190/0x1b0
[<c0126635>] check_preempt_wakeup+0xe5/0x120
[<c0126def>] try_to_wake_up+0xaf/0x180
[<c015474b>] sys_init_module+0x8b/0x1b0
[<c0103ef3>] sysenter_do_call+0x12/0x33
=======================
handlers:
[<c0229cfc>] (acpi_irq+0x0/0x1f)
[<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
[<e0b3fdf0>] (ath_intr+0x0/0x4880 [ath_pci])
[<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
[<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
Disabling IRQ #9
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
lp0: using parport0 (interrupt-driven).
usb 1-1.4: new low speed USB device using uhci_hcd and address 3
usb 1-1.4: configuration #1 chosen from 1 choice
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
usbcore: registered new interface driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input9
input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ACPI: EC: missing confirmations, switch off interrupt mode.
JFS: nTxBlock = 4026, nTxLock = 32211
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
Note the "can't allocate resource areas"... And here is the new dockless dmesg:
Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
last_pfn = 0x1fff0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1fff0000 @ 7000-d000
RAMDISK: 00e4d000 - 00effb5b
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1fff0000
low ram: 00000000 - 1fff0000
bootmap 00002000 - 00006000
(9 early reservations) ==> bootmem [0000000000 - 001fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
#4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
#5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001fff0
HighMem 0x0001fff0 -> 0x0001fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130959
free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 125968 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01402000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PERCPU: Allocating 39324 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 697.409 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03f3000 - 0xc043b000 ( 288 kB)
.data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
.text : 0xc0100000 - 0xc0319f76 (2151 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324696)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0e00)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (1395.93 BogoMIPS).
net_namespace: 832 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
pci 0000:00:03.0: supports D1
pci 0000:00:03.0: supports D2
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
pci 0000:00:03.1: supports D1
pci 0000:00:03.1: supports D2
pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PME# disabled
PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
pci 0000:00:05.0: supports D1
pci 0000:00:05.0: supports D2
PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02
pci 0000:00:02.0: IO window: 0x001400-0x0014ff
pci 0000:00:02.0: IO window: 0x001c00-0x001cff
pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06
pci 0000:00:02.1: IO window: 0x003000-0x0030ff
pci 0000:00:02.1: IO window: 0x003400-0x0034ff
pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
pci 0000:00:02.1: power state changed by ACPI to D0
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [2000, 2fff]
bus: 01 index 1 mmio: [f0200000, f02fffff]
bus: 01 index 2 mmio: [f8000000, fbffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [1400, 14ff]
bus: 02 index 1 io port: [1c00, 1cff]
bus: 02 index 2 mmio: [30000000, 33ffffff]
bus: 02 index 3 mmio: [34000000, 37ffffff]
bus: 06 index 0 io port: [3000, 30ff]
bus: 06 index 1 io port: [3400, 34ff]
bus: 06 index 2 mmio: [38000000, 3bffffff]
bus: 06 index 3 mmio: [3c000000, 3fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 714k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 288k freed
Switched to high resolution mode on CPU 0
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
Driver 'sr' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.21
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
e100 0000:00:03.0: PME# disabled
e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1864kHz
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 440BX Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to cpufreq changes
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
Clocksource tsc unstable (delta = 142862504 ns)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (34 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
spurious 8259A interrupt: IRQ7.
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000006
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pccard: CardBus card inserted into slot 0
PCI: 0000:02:00.0 reg 10 32bit mmio: [0, ffff]
ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
ath_pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
Error: Driver 'pcspkr' is already registered, aborting...
usb 1-1: new low speed USB device using uhci_hcd and address 2
input: Video Bus as /class/input/input7
usb 1-1: configuration #1 chosen from 1 choice
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
NET: Registered protocol family 23
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
PPP generic driver version 2.4.2
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
lp0: using parport0 (interrupt-driven).
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
ppdev: user-space parallel port driver
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
usbcore: registered new interface driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input9
input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
JFS: nTxBlock = 4026, nTxLock = 32211
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
The strangest thing has also happened recently. The laptop refuses to use its own display when starting up in the dock unless an external monitor is plugged in. If a CRT is plugged in, the docked laptop starts up and shows the splash screen on its LCD. If no CRT is plugged in, turning on the docked laptop results in a blank screen. This might have happened because I fiddled with the BIOS which would make alot of sense but resetting the BIOS to default configuration hasn't fixed the problem. I also could have broken a pin but the last thing I remember doing before this happened is running cat /sys/module/snd_ac97_codec/parameters/power_save. It's one of those untouchable virtual files that causes a kernel oops when I try to read it sometimes. I have no idea how this would break the dock but it doesn't matter. Even if using the dock requires some external monitor jazz, I still want the card to be detected and it isn't.
Sorry to bombard you with obscure information but I don't know where else to turn. I've asked on the thinkpad mailing list and IRC channel to no response and I've seen one other "knowledgeable person" mention these errors on the LKML. I will subscribe to that and ask him too. I'm just very surprised... this gave me the impression that what I wanted to do would work trivially and automatically on Linux and now I'm finding that it's broken for me and possibly every other Linux user. I will seek out thinkpad users from around here with all types of models and distros and see if they have any luck. So far Arch, Arch install CD and an ancient Ubuntu install CD don't work here. If anyone has this and can test it or can decipher some ideas from the posted output (new kernel parameters, new kernel config flags, new udev rules, new modules?) I'd really appreciate it. -
Time Capsule: WI-FI and Ethernet at the same time
Hi everybody,
I've connected my mac book (Lion) to a 2T time capsule via wifi and it works fine. The TC is connected via wifi to an existing network (and internet connection).
Unfortunately, using this configuration, ethernet connection between the macbook and the TC (to speed up file copying) doesn't work: it just keeps connecting via wifi.
I've also tried to switch of the wifi connection on the macbook to "force" the use of the ethernet cable but it doesn't work.
Is there any way to use the wifi connection but, when needed, just connect the macbook via ethernet without changing the TC configuration?
Thanks in advance
MWhen you configure the TC to "join a wireless network" as you have likely done, it performs no routing functions in this type of setup.....and the Ethernet ports are not enabled.
In effect, the TC becomes a wireless hard drive when it "joins" a wireless network.
You would need to consider whether you want to reconfigure your TC in a a diffferent way......(connecting it to your main wireless router using a wired Ethernet cable)......if you want to have Ethernet capability on the TC. -
Gigabit ethernet pc card for powerbook?
i have a 17" powerbook with 10/100 ethernet capability that i'd like to upgrade to gigabit. can anyone recommend a pc card that would be compatible? they all seem to be windows only.
many thanks
powerbook g4 15" Mac OS X (10.4.4)Odd... according to the specification in the PDF document available form this link http://docs.info.apple.com/article.html?artnum=86460 1.33 17" PowerBooks have Gigabit ethernet...
Check the System Profiler (click on the Apple logo, select "About this Mac" and press the "More..." button. I think the ethernet capabilities should be available somewhere).
Centris 610, Beige G3 300 DT, iBook, PowerBook G4 Mac OS X (10.4.5) iPod (original), iPod shuffle, iPod nano (with Radio Remote) -
Will Apple's USB-Ethernet Adapter Work on iMac
One of the pins in the ethernet port of my iMac were bent. The second I attempted to bring the pin up, it broke. So I haven't been able to use ethernet for over a year.
Will the Apple USB Ethernet Adapter work on my Late 2006 2Ghz Intel Core 2 Duo iMac? It is loaded with Leopard 10.5.5. I've read these adapters would only work for MBAir but will it work on my iMac?
I'm not looking to get back Gigabyte Ethernet capability, I generally want to use ethernet again.I do have a Base Station the current base station.
All my stuff except my iMac & iBook is packed deep in a storage facility since I'm on a move to someplace else. Meanwhile I'm staying in a place that doesn't have Wi-FI but offers wired ethernet connection.
I have my iBook but I want to use my iMac again & that adapter is all I need to get it connected. I just want to know if it would work since it's intent is for the MacBook Air. -
Re: Is ethernet cable to AEBS (b/g) faster than wireless connection?
Just wondering if an ethernet cable from my AEBS (b/g) to my older iMac G5 (2.0 GHz) is faster than having it connected wirelessly?
What ethernet would I likely have? Fast ethernet?
Your AEBS comes with a combination 10/100 Mbps "fast" Ethernet switch built-in.
When would one encounter a gigabit ethernet?
The newer 802.11n (2nd generation) AEBSn and Time Capsule have Gigabit Ethernet capability. To take advantage of this technology all devices would need to be Gigabit Ethernet enabled.
The short of it is that if my AEBS is b/g, the max would be 54 mbps and a fast ethernet would almost double this. yes?
Correct. -
How to share ethernet printer via wifi?
I currently have an ethernet laser printer connected to our two desktops via an ethernet router/hub. If I disconnect the ethernet hard wire from one desktop, is there a way for it to continue to access the printer (ethernet capable, not USB) if I add an Airport Extreme base station? If so, will it be able to access the printer directly as it does now, or would I have to have it use sharing with the other desktop to which the printer will still be connected via an ethernet cable? (My current wifi is supplied by a Qwest modem/router with wifi). Thank you.
If you get an AirPort Extreme, all of your wired and wireless devices will belong to the same network. Specifically, if you connect one desktop and the printer to the AirPort ethernet and connect the other desktop wirelessly, both Macs will be able to print in exactly the same way.
Maybe you are looking for
-
Bex Report issue - transaction data of type Char not dispalyed complete
Hi BI Expers , I have one issue related to Bex reports here I have complete data loaded in DSO , there is one field Job Title which is having a length of 60 char . When I am executing the report in Bex Analyzer , the value for Job Title is getting tr
-
I recently purchased the Lion and Mountain Lion software to upgrade my MacBook Pro enough to be able to install Maverick (I realized now I only need Lion but oh well). I'm currently running on OS X 10.6.3. I have codes to install Lion using the App
-
Help me to connect my iphone with the itunes
when i connect it to the computer ut tell me to open my passcode on the phone before it connect but i have already open my passcod and i dont know why it still asking me please i need help
-
CSS not applying to a page if navigated to from one other page in the site
Hi, Quite new to dreamweaver. Built a site a few months ago and when updating the content I decided to update the style as well using the CSS sheet. Strange problem occurring.... When you navigate to the Contact Us page directly via URL or any but on
-
How to unlock iphone 3gs with ios6
Hi, I have an iphone 3gs form att and i moved to Denmark. The people at att told me tha iphone was unocked and that i should be able to use it over here. It turns out it is not. After I updated the iphone to ios6 the phone cannot be activated from he